mirror of
https://github.com/NawfalMotii79/PLFM_RADAR.git
synced 2026-05-21 15:21:55 +00:00
feat(fpga): swap matched-filter chain to Xilinx LogiCORE FFT v9.1 IP
Replaces the in-house iterative fft_engine.v in the matched-filter chain
with the Pipelined Streaming Xilinx FFT IP, closing RX-NEW-3 (FFT chain
~11x too slow vs PRI budget).
Components:
* ip/xfft_2048_ip/xfft_2048_ip.xci — committed IP definition
(16-bit fixed point, BFP scaling, convergent rounding, natural order,
pipelined-streaming, BRAM data/reorder/phase factors). Vivado
regenerates .dcp / sim-netlist from this on each build.
* scripts/50t/gen_xfft_2048_ip.tcl — IP-Catalog generation script
* scripts/50t/run_xfft_xsim.sh — XSim batch runner for tb_xfft_2048_xsim
* xfft_2048.v — AXI-Stream wrapper. FFT_USE_XILINX_IP define routes to
real LogiCORE for synth/XSim; falls back to fft_engine batched
one-shot for iverilog (unit coverage only).
* fft_engine_axi_bridge.v — exposes legacy fft_engine port surface on
top of the xfft_2048 AXI wrapper, so the chain swap is a 1-line
module-name change.
* matched_filter_processing_chain.v — fft_engine -> fft_engine_axi_bridge
* scripts/50t/build_50t.tcl — read_ip + generate_target + synth_ip;
adds FFT_USE_XILINX_IP to verilog defines.
* tb/tb_xfft_2048_xsim.v — XSim verification (DC, impulse, tone bin 128).
All 5 assertions PASS on remote with the real IP; tuser=0x0a (BLK_EXP=10)
confirms BFP scaling working.
Local iverilog regression: 32/34 PASS — identical to baseline. Same two
RX-NEW-3 failures (Receiver Integration, Matched Filter Chain) — these
only resolve in remote XSim with the real IP, since iverilog uses the
fft_engine fallback inside xfft_2048 (~150K cycles/pass, not the
~2200-cycle Pipelined Streaming throughput). MF cosim 4/4 PASS confirms
bridge bit-exact in fallback mode.
Pending: remote XSim of tb_radar_receiver_final to demonstrate Doppler
frames produced within PRI budget; remote synth to confirm DSP/timing
post-IP.
This commit is contained in:
Jason
6
9_Firmware/9_2_FPGA/.gitignore
vendored
6
9_Firmware/9_2_FPGA/.gitignore
vendored
@@ -17,3 +17,9 @@ tb/cosim/rx_final_doppler_out.csv
|
|||||||
*.str
|
*.str
|
||||||
*.bit
|
*.bit
|
||||||
*.ltx
|
*.ltx
|
||||||
|
|
||||||
|
# Vivado IP build artifacts (regenerated from .xci by gen_xfft_2048_ip.tcl).
|
||||||
|
# Only the .xci is committed — Vivado reproduces .dcp / sim-netlist / etc.
|
||||||
|
ip/xfft_2048_ip/*
|
||||||
|
!ip/xfft_2048_ip/xfft_2048_ip.xci
|
||||||
|
build_xsim_xfft/
|
||||||
|
|||||||
177
9_Firmware/9_2_FPGA/fft_engine_axi_bridge.v
Normal file
177
9_Firmware/9_2_FPGA/fft_engine_axi_bridge.v
Normal file
@@ -0,0 +1,177 @@
|
|||||||
|
`timescale 1ns / 1ps
|
||||||
|
// ============================================================================
|
||||||
|
// fft_engine_axi_bridge — drop-in fft_engine replacement backed by xfft_2048
|
||||||
|
// ============================================================================
|
||||||
|
// Port list mirrors fft_engine.v exactly, so call sites in
|
||||||
|
// matched_filter_processing_chain.v swap with a single module-name change
|
||||||
|
// (`fft_engine` → `fft_engine_axi_bridge`). Internally instantiates the
|
||||||
|
// xfft_2048 AXI-Stream wrapper, which routes to either the LogiCORE FFT v9.1
|
||||||
|
// (synth/XSim, when FFT_USE_XILINX_IP is defined) or the in-house batched
|
||||||
|
// fft_engine (iverilog fallback). Either way the legacy interface is the same.
|
||||||
|
//
|
||||||
|
// Behavior contract preserved from fft_engine:
|
||||||
|
// - `start` pulse begins a frame; `inverse` selects FWD/INV
|
||||||
|
// - feed N samples on din_re/im with din_valid (any spacing OK)
|
||||||
|
// - dout_re/im pulse out with dout_valid for N samples
|
||||||
|
// - `done` pulses on the last output sample (tlast)
|
||||||
|
// - `busy` is high from start through done
|
||||||
|
//
|
||||||
|
// Latency: replaces fft_engine's ~150-180K-cycle iterative compute with the
|
||||||
|
// LogiCORE Pipelined Streaming ~N + ~150-cycle pipeline. Functional behavior
|
||||||
|
// is identical from the chain's view.
|
||||||
|
// ============================================================================
|
||||||
|
|
||||||
|
module fft_engine_axi_bridge #(
|
||||||
|
parameter N = 2048,
|
||||||
|
parameter LOG2N = 11,
|
||||||
|
parameter DATA_W = 16,
|
||||||
|
parameter INTERNAL_W = 32,
|
||||||
|
parameter TWIDDLE_W = 16,
|
||||||
|
parameter TWIDDLE_FILE = "fft_twiddle_2048.mem"
|
||||||
|
) (
|
||||||
|
input wire clk,
|
||||||
|
input wire reset_n,
|
||||||
|
input wire start,
|
||||||
|
input wire inverse,
|
||||||
|
|
||||||
|
input wire signed [DATA_W-1:0] din_re,
|
||||||
|
input wire signed [DATA_W-1:0] din_im,
|
||||||
|
input wire din_valid,
|
||||||
|
|
||||||
|
output wire signed [DATA_W-1:0] dout_re,
|
||||||
|
output wire signed [DATA_W-1:0] dout_im,
|
||||||
|
output wire dout_valid,
|
||||||
|
|
||||||
|
output reg busy,
|
||||||
|
output reg done
|
||||||
|
);
|
||||||
|
|
||||||
|
// ============================================================================
|
||||||
|
// AXI-Stream signals to/from xfft_2048
|
||||||
|
// ============================================================================
|
||||||
|
reg [7:0] cfg_tdata;
|
||||||
|
reg cfg_tvalid;
|
||||||
|
wire cfg_tready;
|
||||||
|
|
||||||
|
reg [31:0] axi_din_tdata;
|
||||||
|
reg axi_din_tvalid;
|
||||||
|
reg axi_din_tlast;
|
||||||
|
wire axi_din_tready;
|
||||||
|
|
||||||
|
wire [31:0] axi_dout_tdata;
|
||||||
|
wire [7:0] axi_dout_tuser;
|
||||||
|
wire axi_dout_tvalid;
|
||||||
|
wire axi_dout_tlast;
|
||||||
|
|
||||||
|
// xfft_2048 wrapper. AXI master always-accept (no backpressure modeling here).
|
||||||
|
xfft_2048 u_xfft (
|
||||||
|
.aclk (clk),
|
||||||
|
.aresetn (reset_n),
|
||||||
|
.s_axis_config_tdata (cfg_tdata),
|
||||||
|
.s_axis_config_tvalid (cfg_tvalid),
|
||||||
|
.s_axis_config_tready (cfg_tready),
|
||||||
|
.s_axis_data_tdata (axi_din_tdata),
|
||||||
|
.s_axis_data_tvalid (axi_din_tvalid),
|
||||||
|
.s_axis_data_tlast (axi_din_tlast),
|
||||||
|
.s_axis_data_tready (axi_din_tready),
|
||||||
|
.m_axis_data_tdata (axi_dout_tdata),
|
||||||
|
.m_axis_data_tuser (axi_dout_tuser),
|
||||||
|
.m_axis_data_tvalid (axi_dout_tvalid),
|
||||||
|
.m_axis_data_tlast (axi_dout_tlast),
|
||||||
|
.m_axis_data_tready (1'b1)
|
||||||
|
);
|
||||||
|
|
||||||
|
// Output mapping: AXI {Q,I} 32-bit → fft_engine-style separate re/im
|
||||||
|
assign dout_re = $signed(axi_dout_tdata[15:0]);
|
||||||
|
assign dout_im = $signed(axi_dout_tdata[31:16]);
|
||||||
|
assign dout_valid = axi_dout_tvalid;
|
||||||
|
|
||||||
|
// ============================================================================
|
||||||
|
// Bridge FSM
|
||||||
|
// ============================================================================
|
||||||
|
// On `start`: latch inverse, send config (one-cycle pulse with FWD bit), then
|
||||||
|
// open the data path. Track sample count so we can assert tlast on the Nth
|
||||||
|
// input. `busy` raised on start, dropped after done. `done` pulsed on last
|
||||||
|
// output (tlast).
|
||||||
|
// ============================================================================
|
||||||
|
localparam [1:0] S_IDLE = 2'd0,
|
||||||
|
S_CFG = 2'd1,
|
||||||
|
S_FEED = 2'd2,
|
||||||
|
S_DRAIN = 2'd3;
|
||||||
|
|
||||||
|
reg [1:0] state;
|
||||||
|
reg inverse_latched;
|
||||||
|
reg [LOG2N:0] in_count; // counts inputs accepted into the IP
|
||||||
|
|
||||||
|
always @(posedge clk or negedge reset_n) begin
|
||||||
|
if (!reset_n) begin
|
||||||
|
state <= S_IDLE;
|
||||||
|
cfg_tdata <= 8'd0;
|
||||||
|
cfg_tvalid <= 1'b0;
|
||||||
|
axi_din_tdata <= 32'd0;
|
||||||
|
axi_din_tvalid <= 1'b0;
|
||||||
|
axi_din_tlast <= 1'b0;
|
||||||
|
in_count <= 0;
|
||||||
|
inverse_latched <= 1'b0;
|
||||||
|
busy <= 1'b0;
|
||||||
|
done <= 1'b0;
|
||||||
|
end else begin
|
||||||
|
// Defaults — pulses
|
||||||
|
done <= 1'b0;
|
||||||
|
|
||||||
|
case (state)
|
||||||
|
S_IDLE: begin
|
||||||
|
axi_din_tvalid <= 1'b0;
|
||||||
|
axi_din_tlast <= 1'b0;
|
||||||
|
cfg_tvalid <= 1'b0;
|
||||||
|
if (start) begin
|
||||||
|
inverse_latched <= inverse;
|
||||||
|
cfg_tdata <= {7'd0, ~inverse}; // tdata[0]=1 → FWD
|
||||||
|
cfg_tvalid <= 1'b1;
|
||||||
|
in_count <= 0;
|
||||||
|
busy <= 1'b1;
|
||||||
|
state <= S_CFG;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_CFG: begin
|
||||||
|
// Hold cfg_tvalid until IP accepts (tready). Then open data path.
|
||||||
|
if (cfg_tready) begin
|
||||||
|
cfg_tvalid <= 1'b0;
|
||||||
|
state <= S_FEED;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_FEED: begin
|
||||||
|
// Forward din_valid → AXI din_tvalid, packing {Q,I}.
|
||||||
|
// Assert tlast on the Nth input.
|
||||||
|
if (din_valid && (in_count < N)) begin
|
||||||
|
axi_din_tdata <= {din_im, din_re};
|
||||||
|
axi_din_tvalid <= 1'b1;
|
||||||
|
axi_din_tlast <= (in_count == N - 1);
|
||||||
|
in_count <= in_count + 1;
|
||||||
|
end else begin
|
||||||
|
axi_din_tvalid <= 1'b0;
|
||||||
|
axi_din_tlast <= 1'b0;
|
||||||
|
end
|
||||||
|
if (in_count == N) begin
|
||||||
|
// All inputs delivered; await output drain.
|
||||||
|
state <= S_DRAIN;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_DRAIN: begin
|
||||||
|
// Wait for tlast on output, then return to idle.
|
||||||
|
if (axi_dout_tvalid && axi_dout_tlast) begin
|
||||||
|
done <= 1'b1;
|
||||||
|
busy <= 1'b0;
|
||||||
|
state <= S_IDLE;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
default: state <= S_IDLE;
|
||||||
|
endcase
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
endmodule
|
||||||
353
9_Firmware/9_2_FPGA/ip/xfft_2048_ip/xfft_2048_ip.xci
Normal file
353
9_Firmware/9_2_FPGA/ip/xfft_2048_ip/xfft_2048_ip.xci
Normal file
@@ -0,0 +1,353 @@
|
|||||||
|
{
|
||||||
|
"schema": "xilinx.com:schema:json_instance:1.0",
|
||||||
|
"ip_inst": {
|
||||||
|
"xci_name": "xfft_2048_ip",
|
||||||
|
"component_reference": "xilinx.com:ip:xfft:9.1",
|
||||||
|
"ip_revision": "15",
|
||||||
|
"gen_directory": ".",
|
||||||
|
"parameters": {
|
||||||
|
"component_parameters": {
|
||||||
|
"Component_Name": [ { "value": "xfft_2048_ip", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"channels": [ { "value": "1", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"transform_length": [ { "value": "2048", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"target_clock_frequency": [ { "value": "100", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
|
||||||
|
"implementation_options": [ { "value": "pipelined_streaming_io", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"target_data_throughput": [ { "value": "50", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
|
||||||
|
"run_time_configurable_transform_length": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"data_format": [ { "value": "fixed_point", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"input_width": [ { "value": "16", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"phase_factor_width": [ { "value": "16", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"scaling_options": [ { "value": "block_floating_point", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"rounding_modes": [ { "value": "convergent_rounding", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"aclken": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"aresetn": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"ovflo": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"xk_index": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"throttle_scheme": [ { "value": "nonrealtime", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"output_ordering": [ { "value": "natural_order", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"cyclic_prefix_insertion": [ { "value": "false", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"memory_options_data": [ { "value": "block_ram", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"memory_options_phase_factors": [ { "value": "block_ram", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"memory_options_reorder": [ { "value": "block_ram", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"number_of_stages_using_block_ram_for_data_and_phase_factors": [ { "value": "4", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"memory_options_hybrid": [ { "value": "false", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"complex_mult_type": [ { "value": "use_mults_resources", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"butterfly_type": [ { "value": "use_xtremedsp_slices", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"super_sample_rates": [ { "value": "1", "resolve_type": "user", "usage": "all" } ],
|
||||||
|
"systolicfft_inv": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
|
||||||
|
"blocking_run_time_configuration": [ { "value": "false", "resolve_type": "user", "format": "bool", "enabled": false, "usage": "all" } ]
|
||||||
|
},
|
||||||
|
"model_parameters": {
|
||||||
|
"C_XDEVICEFAMILY": [ { "value": "artix7", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"C_PART": [ { "value": "xc7a50tftg256-2", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"C_S_AXIS_CONFIG_TDATA_WIDTH": [ { "value": "8", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_S_AXIS_DATA_TDATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_M_AXIS_DATA_TDATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_M_AXIS_DATA_TUSER_WIDTH": [ { "value": "8", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_M_AXIS_STATUS_TDATA_WIDTH": [ { "value": "8", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_THROTTLE_SCHEME": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_NSSR": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_CHANNELS": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_NFFT_MAX": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_ARCH": [ { "value": "3", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_NFFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_USE_FLT_PT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_INPUT_WIDTH": [ { "value": "16", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_TWIDDLE_WIDTH": [ { "value": "16", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_OUTPUT_WIDTH": [ { "value": "16", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_SCALING": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_BFP": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_ROUNDING": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_ACLKEN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_ARESETN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_OVFLO": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_NATURAL_INPUT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_NATURAL_OUTPUT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_CYCLIC_PREFIX": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_HAS_XK_INDEX": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_DATA_MEM_TYPE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_TWIDDLE_MEM_TYPE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_BRAM_STAGES": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_REORDER_MEM_TYPE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_USE_HYBRID_RAM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_OPTIMIZE_GOAL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_CMPY_TYPE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_BFLY_TYPE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_SYSTOLICFFT_INV": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
|
||||||
|
"C_IS_BLOCKING_RUNTIME_CONF": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ]
|
||||||
|
},
|
||||||
|
"project_parameters": {
|
||||||
|
"ARCHITECTURE": [ { "value": "artix7", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"BASE_BOARD_PART": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"BOARD_CONNECTIONS": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"DEVICE": [ { "value": "xc7a50t", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"PACKAGE": [ { "value": "ftg256", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"PREFHDL": [ { "value": "VERILOG", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"SILICON_REVISION": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"SIMULATOR_LANGUAGE": [ { "value": "MIXED", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"SPEEDGRADE": [ { "value": "-2", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"STATIC_POWER": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
|
||||||
|
"TEMPERATURE_GRADE": [ { "value": "", "resolve_type": "generated", "usage": "all" } ]
|
||||||
|
},
|
||||||
|
"runtime_parameters": {
|
||||||
|
"IPCONTEXT": [ { "value": "IP_Flow" } ],
|
||||||
|
"IPREVISION": [ { "value": "15" } ],
|
||||||
|
"MANAGED": [ { "value": "TRUE" } ],
|
||||||
|
"OUTPUTDIR": [ { "value": "." } ],
|
||||||
|
"SELECTEDSIMMODEL": [ { "value": "" } ],
|
||||||
|
"SHAREDDIR": [ { "value": "." } ],
|
||||||
|
"SWVERSION": [ { "value": "2025.2" } ],
|
||||||
|
"SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"boundary": {
|
||||||
|
"ports": {
|
||||||
|
"aclk": [ { "direction": "in", "driver_value": "0x1" } ],
|
||||||
|
"s_axis_config_tdata": [ { "direction": "in", "size_left": "7", "size_right": "0" } ],
|
||||||
|
"s_axis_config_tvalid": [ { "direction": "in" } ],
|
||||||
|
"s_axis_config_tready": [ { "direction": "out" } ],
|
||||||
|
"s_axis_data_tdata": [ { "direction": "in", "size_left": "31", "size_right": "0" } ],
|
||||||
|
"s_axis_data_tvalid": [ { "direction": "in" } ],
|
||||||
|
"s_axis_data_tready": [ { "direction": "out" } ],
|
||||||
|
"s_axis_data_tlast": [ { "direction": "in" } ],
|
||||||
|
"m_axis_data_tdata": [ { "direction": "out", "size_left": "31", "size_right": "0" } ],
|
||||||
|
"m_axis_data_tuser": [ { "direction": "out", "size_left": "7", "size_right": "0" } ],
|
||||||
|
"m_axis_data_tvalid": [ { "direction": "out" } ],
|
||||||
|
"m_axis_data_tready": [ { "direction": "in", "driver_value": "0x1" } ],
|
||||||
|
"m_axis_data_tlast": [ { "direction": "out" } ],
|
||||||
|
"m_axis_status_tdata": [ { "direction": "out", "size_left": "7", "size_right": "0" } ],
|
||||||
|
"m_axis_status_tvalid": [ { "direction": "out" } ],
|
||||||
|
"m_axis_status_tready": [ { "direction": "in", "driver_value": "0x1" } ],
|
||||||
|
"event_frame_started": [ { "direction": "out", "driver_value": "0x0" } ],
|
||||||
|
"event_tlast_unexpected": [ { "direction": "out", "driver_value": "0x0" } ],
|
||||||
|
"event_tlast_missing": [ { "direction": "out", "driver_value": "0x0" } ],
|
||||||
|
"event_status_channel_halt": [ { "direction": "out", "driver_value": "0x0" } ],
|
||||||
|
"event_data_in_channel_halt": [ { "direction": "out", "driver_value": "0x0" } ],
|
||||||
|
"event_data_out_channel_halt": [ { "direction": "out", "driver_value": "0x0" } ]
|
||||||
|
},
|
||||||
|
"interfaces": {
|
||||||
|
"event_frame_started_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_frame_started" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_tlast_unexpected_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_tlast_unexpected" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_tlast_missing_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_tlast_missing" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_fft_overflow_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_status_channel_halt_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_status_channel_halt" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_data_in_channel_halt_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_data_in_channel_halt" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"event_data_out_channel_halt_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:interrupt:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:interrupt_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"SENSITIVITY": [ { "value": "EDGE_RISING", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"PortWidth": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"INTERRUPT": [ { "physical_name": "event_data_out_channel_halt" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"S_AXIS_DATA": {
|
||||||
|
"vlnv": "xilinx.com:interface:axis:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:interface:axis_rtl:1.0",
|
||||||
|
"mode": "slave",
|
||||||
|
"parameters": {
|
||||||
|
"TDATA_NUM_BYTES": [ { "value": "4", "value_src": "auto", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TDEST_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TID_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TUSER_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TREADY": [ { "value": "1", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TSTRB": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TKEEP": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TLAST": [ { "value": "1", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"LAYERED_METADATA": [ { "value": "undef", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"TDATA": [ { "physical_name": "s_axis_data_tdata" } ],
|
||||||
|
"TLAST": [ { "physical_name": "s_axis_data_tlast" } ],
|
||||||
|
"TREADY": [ { "physical_name": "s_axis_data_tready" } ],
|
||||||
|
"TVALID": [ { "physical_name": "s_axis_data_tvalid" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"aclk_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:clock:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
|
||||||
|
"mode": "slave",
|
||||||
|
"parameters": {
|
||||||
|
"ASSOCIATED_BUSIF": [ { "value": "S_AXIS_CONFIG:M_AXIS_DATA:M_AXIS_STATUS:S_AXIS_DATA", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"ASSOCIATED_RESET": [ { "value": "aresetn", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"ASSOCIATED_CLKEN": [ { "value": "aclken", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"FREQ_HZ": [ { "value": "100000000", "resolve_type": "user", "format": "long", "usage": "all" } ],
|
||||||
|
"FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"CLK": [ { "physical_name": "aclk" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"aresetn_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:reset:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
|
||||||
|
"mode": "slave",
|
||||||
|
"parameters": {
|
||||||
|
"POLARITY": [ { "value": "ACTIVE_LOW", "value_src": "constant", "usage": "all" } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"aclken_intf": {
|
||||||
|
"vlnv": "xilinx.com:signal:clockenable:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:signal:clockenable_rtl:1.0",
|
||||||
|
"mode": "slave",
|
||||||
|
"parameters": {
|
||||||
|
"POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"M_AXIS_STATUS": {
|
||||||
|
"vlnv": "xilinx.com:interface:axis:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:interface:axis_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"TDATA_NUM_BYTES": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TDEST_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TID_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TUSER_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TREADY": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TSTRB": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TKEEP": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TLAST": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"LAYERED_METADATA": [ { "value": "undef", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"TDATA": [ { "physical_name": "m_axis_status_tdata" } ],
|
||||||
|
"TREADY": [ { "physical_name": "m_axis_status_tready" } ],
|
||||||
|
"TVALID": [ { "physical_name": "m_axis_status_tvalid" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"M_AXIS_DATA": {
|
||||||
|
"vlnv": "xilinx.com:interface:axis:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:interface:axis_rtl:1.0",
|
||||||
|
"mode": "master",
|
||||||
|
"parameters": {
|
||||||
|
"TDATA_NUM_BYTES": [ { "value": "4", "value_src": "auto", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TDEST_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TID_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TUSER_WIDTH": [ { "value": "8", "value_src": "auto", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TREADY": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TSTRB": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TKEEP": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TLAST": [ { "value": "1", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"LAYERED_METADATA": [ { "value": "undef", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"TDATA": [ { "physical_name": "m_axis_data_tdata" } ],
|
||||||
|
"TLAST": [ { "physical_name": "m_axis_data_tlast" } ],
|
||||||
|
"TREADY": [ { "physical_name": "m_axis_data_tready" } ],
|
||||||
|
"TUSER": [ { "physical_name": "m_axis_data_tuser" } ],
|
||||||
|
"TVALID": [ { "physical_name": "m_axis_data_tvalid" } ]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"S_AXIS_CONFIG": {
|
||||||
|
"vlnv": "xilinx.com:interface:axis:1.0",
|
||||||
|
"abstraction_type": "xilinx.com:interface:axis_rtl:1.0",
|
||||||
|
"mode": "slave",
|
||||||
|
"parameters": {
|
||||||
|
"TDATA_NUM_BYTES": [ { "value": "1", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TDEST_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TID_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"TUSER_WIDTH": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TREADY": [ { "value": "1", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TSTRB": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TKEEP": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"HAS_TLAST": [ { "value": "0", "value_src": "constant", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"LAYERED_METADATA": [ { "value": "undef", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
|
||||||
|
"INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
|
||||||
|
},
|
||||||
|
"port_maps": {
|
||||||
|
"TDATA": [ { "physical_name": "s_axis_config_tdata" } ],
|
||||||
|
"TREADY": [ { "physical_name": "s_axis_config_tready" } ],
|
||||||
|
"TVALID": [ { "physical_name": "s_axis_config_tvalid" } ]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"checksum": "6bf94ec5"
|
||||||
|
}
|
||||||
@@ -151,7 +151,14 @@ wire fft_dout_valid;
|
|||||||
wire fft_busy;
|
wire fft_busy;
|
||||||
wire fft_done;
|
wire fft_done;
|
||||||
|
|
||||||
fft_engine #(
|
// xfft_2048 (Xilinx LogiCORE FFT v9.1) via fft_engine_axi_bridge — preserves
|
||||||
|
// the legacy fft_engine port surface so this call site stays a 1-line swap.
|
||||||
|
// In synth + remote XSim: real Pipelined Streaming IP (~N + 150 cycles/pass,
|
||||||
|
// closes RX-NEW-3 PRI budget). In iverilog: bridge falls through to the
|
||||||
|
// in-house fft_engine batched fallback inside xfft_2048.v (~150K cycles/pass,
|
||||||
|
// for unit coverage only — receiver-integration timing is meaningful only in
|
||||||
|
// XSim with the real IP).
|
||||||
|
fft_engine_axi_bridge #(
|
||||||
.N(FFT_SIZE),
|
.N(FFT_SIZE),
|
||||||
.LOG2N(ADDR_BITS),
|
.LOG2N(ADDR_BITS),
|
||||||
.DATA_W(16),
|
.DATA_W(16),
|
||||||
|
|||||||
@@ -69,6 +69,8 @@ PROD_RTL=(
|
|||||||
doppler_processor.v
|
doppler_processor.v
|
||||||
xfft_16.v
|
xfft_16.v
|
||||||
fft_engine.v
|
fft_engine.v
|
||||||
|
xfft_2048.v
|
||||||
|
fft_engine_axi_bridge.v
|
||||||
frequency_matched_filter.v
|
frequency_matched_filter.v
|
||||||
usb_data_interface.v
|
usb_data_interface.v
|
||||||
usb_data_interface_ft2232h.v
|
usb_data_interface_ft2232h.v
|
||||||
@@ -102,6 +104,7 @@ RECEIVER_RTL=(
|
|||||||
chirp_memory_loader_param.v latency_buffer.v
|
chirp_memory_loader_param.v latency_buffer.v
|
||||||
matched_filter_multi_segment.v matched_filter_processing_chain.v
|
matched_filter_multi_segment.v matched_filter_processing_chain.v
|
||||||
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v
|
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v
|
||||||
|
xfft_2048.v fft_engine_axi_bridge.v
|
||||||
frequency_matched_filter.v
|
frequency_matched_filter.v
|
||||||
rx_gain_control.v mti_canceller.v
|
rx_gain_control.v mti_canceller.v
|
||||||
)
|
)
|
||||||
@@ -282,7 +285,7 @@ run_mf_cosim() {
|
|||||||
if [[ -n "$define" ]]; then
|
if [[ -n "$define" ]]; then
|
||||||
cmd="$cmd $define"
|
cmd="$cmd $define"
|
||||||
fi
|
fi
|
||||||
cmd="$cmd -o $vvp tb/tb_mf_cosim.v matched_filter_processing_chain.v fft_engine.v frequency_matched_filter.v chirp_memory_loader_param.v"
|
cmd="$cmd -o $vvp tb/tb_mf_cosim.v matched_filter_processing_chain.v fft_engine.v xfft_2048.v fft_engine_axi_bridge.v frequency_matched_filter.v chirp_memory_loader_param.v"
|
||||||
|
|
||||||
if ! eval "$cmd" 2>/tmp/iverilog_err_$$; then
|
if ! eval "$cmd" 2>/tmp/iverilog_err_$$; then
|
||||||
echo -e "${RED}COMPILE FAIL${NC}"
|
echo -e "${RED}COMPILE FAIL${NC}"
|
||||||
@@ -640,7 +643,8 @@ run_test "FIR Lowpass" \
|
|||||||
run_test --timeout=600 "Matched Filter Chain" \
|
run_test --timeout=600 "Matched Filter Chain" \
|
||||||
tb/tb_mf_reg.vvp \
|
tb/tb_mf_reg.vvp \
|
||||||
tb/tb_matched_filter_processing_chain.v matched_filter_processing_chain.v \
|
tb/tb_matched_filter_processing_chain.v matched_filter_processing_chain.v \
|
||||||
fft_engine.v chirp_memory_loader_param.v frequency_matched_filter.v
|
fft_engine.v xfft_2048.v fft_engine_axi_bridge.v \
|
||||||
|
chirp_memory_loader_param.v frequency_matched_filter.v
|
||||||
|
|
||||||
# RX-B regression coverage: chain pipeline depth + full-chain
|
# RX-B regression coverage: chain pipeline depth + full-chain
|
||||||
# autocorrelation peak position. Both run the production fft_engine
|
# autocorrelation peak position. Both run the production fft_engine
|
||||||
@@ -649,12 +653,13 @@ run_test --timeout=600 "Matched Filter Chain" \
|
|||||||
run_test --timeout=120 "RX-B Chain Pipeline Latency (tb_rxb_latency_measure)" \
|
run_test --timeout=120 "RX-B Chain Pipeline Latency (tb_rxb_latency_measure)" \
|
||||||
tb/tb_rxb_lat_reg.vvp \
|
tb/tb_rxb_lat_reg.vvp \
|
||||||
tb/tb_rxb_latency_measure.v matched_filter_processing_chain.v \
|
tb/tb_rxb_latency_measure.v matched_filter_processing_chain.v \
|
||||||
fft_engine.v frequency_matched_filter.v
|
fft_engine.v xfft_2048.v fft_engine_axi_bridge.v frequency_matched_filter.v
|
||||||
|
|
||||||
run_test --timeout=600 "RX-B Full-Chain Autocorrelation (tb_rxb_fullchain_latency)" \
|
run_test --timeout=600 "RX-B Full-Chain Autocorrelation (tb_rxb_fullchain_latency)" \
|
||||||
tb/tb_rxb_fc_reg.vvp \
|
tb/tb_rxb_fc_reg.vvp \
|
||||||
tb/tb_rxb_fullchain_latency.v matched_filter_multi_segment.v \
|
tb/tb_rxb_fullchain_latency.v matched_filter_multi_segment.v \
|
||||||
matched_filter_processing_chain.v fft_engine.v frequency_matched_filter.v \
|
matched_filter_processing_chain.v fft_engine.v xfft_2048.v \
|
||||||
|
fft_engine_axi_bridge.v frequency_matched_filter.v \
|
||||||
chirp_memory_loader_param.v
|
chirp_memory_loader_param.v
|
||||||
|
|
||||||
echo ""
|
echo ""
|
||||||
|
|||||||
@@ -43,7 +43,22 @@ foreach f [glob -directory $rtl_dir *.v] {
|
|||||||
}
|
}
|
||||||
|
|
||||||
set_property top $top_module [current_fileset]
|
set_property top $top_module [current_fileset]
|
||||||
set_property verilog_define {FFT_XPM_BRAM} [current_fileset]
|
# FFT_USE_XILINX_IP routes xfft_2048.v's wrapper to the LogiCORE FFT v9.1 IP
|
||||||
|
# (xfft_2048_ip) instead of the in-house fft_engine fallback. The IP closes
|
||||||
|
# RX-NEW-3 (~6600-cycle 3-FFT chain budget vs 16700-cycle PRI).
|
||||||
|
set_property verilog_define {FFT_XPM_BRAM FFT_USE_XILINX_IP} [current_fileset]
|
||||||
|
|
||||||
|
# ===== IP CATALOG =====
|
||||||
|
# Read the pre-generated xfft_2048_ip XCI (produced by gen_xfft_2048_ip.tcl).
|
||||||
|
# generate_target + synth_ip prepare its OOC netlist before launch_runs.
|
||||||
|
set xci_path [file join $project_root "ip" "xfft_2048_ip" "xfft_2048_ip.xci"]
|
||||||
|
if {![file exists $xci_path]} {
|
||||||
|
puts "ERROR: $xci_path missing — run scripts/50t/gen_xfft_2048_ip.tcl first."
|
||||||
|
exit 1
|
||||||
|
}
|
||||||
|
read_ip $xci_path
|
||||||
|
generate_target {synthesis simulation instantiation_template} [get_ips xfft_2048_ip]
|
||||||
|
synth_ip [get_ips xfft_2048_ip]
|
||||||
|
|
||||||
# Constraints — 50T XDC + MMCM supplement
|
# Constraints — 50T XDC + MMCM supplement
|
||||||
add_files -fileset constrs_1 -norecurse [file join $project_root "constraints" "xc7a50t_ftg256.xdc"]
|
add_files -fileset constrs_1 -norecurse [file join $project_root "constraints" "xc7a50t_ftg256.xdc"]
|
||||||
|
|||||||
75
9_Firmware/9_2_FPGA/scripts/50t/gen_xfft_2048_ip.tcl
Normal file
75
9_Firmware/9_2_FPGA/scripts/50t/gen_xfft_2048_ip.tcl
Normal file
@@ -0,0 +1,75 @@
|
|||||||
|
################################################################################
|
||||||
|
# gen_xfft_2048_ip.tcl — Generate Xilinx LogiCORE FFT (xfft_v9_1) for AERIS-10
|
||||||
|
#
|
||||||
|
# Produces ip/xfft_2048/xfft_2048.xci configured for the matched-filter chain:
|
||||||
|
# - Transform Length: 2048
|
||||||
|
# - Architecture: Pipelined Streaming I/O
|
||||||
|
# - Data Format: Fixed Point
|
||||||
|
# - Scaling: Block Floating Point (run-time auto-scale)
|
||||||
|
# - Rounding: Convergent (round-to-even)
|
||||||
|
# - Input Width: 16-bit per real/imag (matches DDC output, DATA_W in chain)
|
||||||
|
# - Phase Width: 16-bit
|
||||||
|
# - Output Ordering: Natural Order
|
||||||
|
# - Throttle Scheme: Non Real Time (allows downstream backpressure)
|
||||||
|
# - Memory: Block RAM for data, reorder, phase factors
|
||||||
|
#
|
||||||
|
# Usage (run on remote Vivado box):
|
||||||
|
# cd ~/PLFM_RADAR_work/PLFM_RADAR/9_Firmware/9_2_FPGA
|
||||||
|
# vivado -mode batch -source scripts/50t/gen_xfft_2048_ip.tcl
|
||||||
|
#
|
||||||
|
# Output: ip/xfft_2048_ip/xfft_2048_ip.xci (committed; build_50t.tcl reads this)
|
||||||
|
# Note: IP module is named xfft_2048_ip to avoid collision with the wrapper
|
||||||
|
# module xfft_2048 in xfft_2048.v.
|
||||||
|
################################################################################
|
||||||
|
|
||||||
|
set script_dir [file dirname [file normalize [info script]]]
|
||||||
|
set project_root [file normalize [file join $script_dir "../.."]]
|
||||||
|
set ip_dir [file join $project_root "ip"]
|
||||||
|
set fpga_part "xc7a50tftg256-2"
|
||||||
|
|
||||||
|
file mkdir $ip_dir
|
||||||
|
|
||||||
|
# Spin up a throwaway in-memory project just for IP generation.
|
||||||
|
create_project -in_memory -part $fpga_part
|
||||||
|
set_property ip_repo_paths $ip_dir [current_project]
|
||||||
|
|
||||||
|
# Create the IP. Any prior version is overwritten via -force.
|
||||||
|
create_ip -name xfft -vendor xilinx.com -library ip \
|
||||||
|
-version 9.1 -module_name xfft_2048_ip -dir $ip_dir -force
|
||||||
|
|
||||||
|
set ip [get_ips xfft_2048_ip]
|
||||||
|
|
||||||
|
set_property -dict [list \
|
||||||
|
CONFIG.transform_length {2048} \
|
||||||
|
CONFIG.implementation_options {pipelined_streaming_io} \
|
||||||
|
CONFIG.channels {1} \
|
||||||
|
CONFIG.data_format {fixed_point} \
|
||||||
|
CONFIG.scaling_options {block_floating_point} \
|
||||||
|
CONFIG.rounding_modes {convergent_rounding} \
|
||||||
|
CONFIG.input_width {16} \
|
||||||
|
CONFIG.phase_factor_width {16} \
|
||||||
|
CONFIG.output_ordering {natural_order} \
|
||||||
|
CONFIG.cyclic_prefix_insertion {false} \
|
||||||
|
CONFIG.throttle_scheme {nonrealtime} \
|
||||||
|
CONFIG.target_clock_frequency {100} \
|
||||||
|
CONFIG.target_data_throughput {50} \
|
||||||
|
CONFIG.complex_mult_type {use_mults_resources} \
|
||||||
|
CONFIG.butterfly_type {use_xtremedsp_slices} \
|
||||||
|
CONFIG.memory_options_data {block_ram} \
|
||||||
|
CONFIG.memory_options_reorder {block_ram} \
|
||||||
|
CONFIG.memory_options_phase_factors {block_ram} \
|
||||||
|
CONFIG.memory_options_hybrid {false} \
|
||||||
|
] $ip
|
||||||
|
|
||||||
|
# Generate synthesis + simulation targets so XSim and Vivado synth both work.
|
||||||
|
generate_target {synthesis simulation instantiation_template} $ip
|
||||||
|
synth_ip $ip
|
||||||
|
|
||||||
|
puts "================================================================"
|
||||||
|
puts " xfft_2048_ip IP generation complete"
|
||||||
|
puts " XCI: $ip_dir/xfft_2048_ip/xfft_2048_ip.xci"
|
||||||
|
puts " DCP: [get_property IP_OUTPUT_DIR $ip]/xfft_2048_ip.dcp"
|
||||||
|
puts "================================================================"
|
||||||
|
|
||||||
|
close_project
|
||||||
|
exit 0
|
||||||
47
9_Firmware/9_2_FPGA/scripts/50t/run_xfft_xsim.sh
Normal file
47
9_Firmware/9_2_FPGA/scripts/50t/run_xfft_xsim.sh
Normal file
@@ -0,0 +1,47 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
# ============================================================================
|
||||||
|
# run_xfft_xsim.sh — Compile + run xfft_2048 wrapper testbench in Vivado XSim
|
||||||
|
#
|
||||||
|
# Verifies the wrapper with the real LogiCORE FFT v9.1 (xfft_2048_ip).
|
||||||
|
# Cannot run in iverilog because the IP uses Xilinx primitives.
|
||||||
|
#
|
||||||
|
# Usage (on remote Vivado box):
|
||||||
|
# cd ~/PLFM_RADAR_work/PLFM_RADAR/9_Firmware/9_2_FPGA
|
||||||
|
# bash scripts/50t/run_xfft_xsim.sh
|
||||||
|
#
|
||||||
|
# Output: /tmp/xfft_xsim.log (look for "ALL TESTS PASSED")
|
||||||
|
# ============================================================================
|
||||||
|
set -e
|
||||||
|
|
||||||
|
PROJ_ROOT="$(cd "$(dirname "$0")/../.." && pwd)"
|
||||||
|
IP_NETLIST="$PROJ_ROOT/ip/xfft_2048_ip/xfft_2048_ip_sim_netlist.v"
|
||||||
|
WRAPPER="$PROJ_ROOT/xfft_2048.v"
|
||||||
|
TB="$PROJ_ROOT/tb/tb_xfft_2048_xsim.v"
|
||||||
|
|
||||||
|
WORK_DIR="$PROJ_ROOT/build_xsim_xfft"
|
||||||
|
mkdir -p "$WORK_DIR"
|
||||||
|
cd "$WORK_DIR"
|
||||||
|
|
||||||
|
echo "===== Compiling Verilog sources ====="
|
||||||
|
# Wrapper + testbench with the IP-on define
|
||||||
|
xvlog -d FFT_USE_XILINX_IP "$WRAPPER" "$TB"
|
||||||
|
# IP simulation netlist — references unisim primitives
|
||||||
|
xvlog "$IP_NETLIST"
|
||||||
|
# fft_engine etc. NOT needed because FFT_USE_XILINX_IP routes around it,
|
||||||
|
# but the wrapper still must compile cleanly under both branches; if xvlog
|
||||||
|
# complains about an unresolved fft_engine reference (it shouldn't because
|
||||||
|
# the `else` branch is hidden by the define), include it here:
|
||||||
|
# xvlog "$PROJ_ROOT/fft_engine.v"
|
||||||
|
|
||||||
|
echo "===== Elaborating ====="
|
||||||
|
# `glbl` is a Vivado-supplied module that Xilinx primitives (FDRE etc.)
|
||||||
|
# reference for the global GSR/GTS signals. Elaborating it as a second top
|
||||||
|
# satisfies the unresolved-reference error xelab raises for the IP netlist.
|
||||||
|
xelab -L unisims_ver -L secureip --debug typical \
|
||||||
|
tb_xfft_2048_xsim glbl -snapshot tb_xfft_2048_snap
|
||||||
|
|
||||||
|
echo "===== Running simulation ====="
|
||||||
|
xsim tb_xfft_2048_snap --runall --log /tmp/xfft_xsim.log
|
||||||
|
|
||||||
|
echo "===== Done. Tail of log: ====="
|
||||||
|
tail -40 /tmp/xfft_xsim.log
|
||||||
283
9_Firmware/9_2_FPGA/tb/tb_xfft_2048_xsim.v
Normal file
283
9_Firmware/9_2_FPGA/tb/tb_xfft_2048_xsim.v
Normal file
@@ -0,0 +1,283 @@
|
|||||||
|
`timescale 1ns / 1ps
|
||||||
|
// ============================================================================
|
||||||
|
// tb_xfft_2048_xsim.v — XSim verification of xfft_2048 wrapper with real IP
|
||||||
|
// ============================================================================
|
||||||
|
// Compiled with `+define+FFT_USE_XILINX_IP` so the wrapper instantiates the
|
||||||
|
// LogiCORE FFT v9.1 (xfft_2048_ip). Cannot run in iverilog because that path
|
||||||
|
// uses Xilinx primitives (DSP48E1, BRAM18). For iverilog, leave the define
|
||||||
|
// off and the wrapper falls back to the fft_engine batched implementation.
|
||||||
|
//
|
||||||
|
// Three minimal stimuli:
|
||||||
|
// 1. DC (re=10000, im=0) → peak bin = 0 with large magnitude;
|
||||||
|
// all other bins near zero.
|
||||||
|
// 2. Impulse (single sample (10000,0)) → output magnitude flat across all bins
|
||||||
|
// (DFT of a delta = constant).
|
||||||
|
// 3. Tone (cos+jsin at bin K=128) → peak bin = K with large magnitude;
|
||||||
|
// all other bins near zero.
|
||||||
|
//
|
||||||
|
// PASS criteria:
|
||||||
|
// - peak bin matches expected
|
||||||
|
// - peak magnitude > 8× mean of non-peak bins (analogous to receiver-chain
|
||||||
|
// SNR check that's been used elsewhere in this codebase)
|
||||||
|
// ============================================================================
|
||||||
|
|
||||||
|
module tb_xfft_2048_xsim;
|
||||||
|
|
||||||
|
localparam CLK_PERIOD = 10.0; // 100 MHz
|
||||||
|
localparam N = 2048;
|
||||||
|
localparam LOG2N = 11;
|
||||||
|
|
||||||
|
reg aclk = 0;
|
||||||
|
reg aresetn = 0;
|
||||||
|
|
||||||
|
reg [7:0] cfg_tdata;
|
||||||
|
reg cfg_tvalid;
|
||||||
|
wire cfg_tready;
|
||||||
|
|
||||||
|
reg [31:0] din_tdata;
|
||||||
|
reg din_tvalid;
|
||||||
|
reg din_tlast;
|
||||||
|
wire din_tready;
|
||||||
|
|
||||||
|
wire [31:0] dout_tdata;
|
||||||
|
wire [7:0] dout_tuser;
|
||||||
|
wire dout_tvalid;
|
||||||
|
wire dout_tlast;
|
||||||
|
reg dout_tready;
|
||||||
|
|
||||||
|
integer pass_count = 0;
|
||||||
|
integer fail_count = 0;
|
||||||
|
integer test_num = 0;
|
||||||
|
|
||||||
|
integer k;
|
||||||
|
integer out_idx;
|
||||||
|
integer peak_bin;
|
||||||
|
integer peak_mag;
|
||||||
|
integer mean_others;
|
||||||
|
integer mag_sum_others;
|
||||||
|
integer this_mag;
|
||||||
|
integer cur_re, cur_im;
|
||||||
|
|
||||||
|
// Capture the entire output frame
|
||||||
|
reg signed [15:0] out_re [0:N-1];
|
||||||
|
reg signed [15:0] out_im [0:N-1];
|
||||||
|
integer out_collected;
|
||||||
|
|
||||||
|
always #(CLK_PERIOD/2) aclk = ~aclk;
|
||||||
|
|
||||||
|
xfft_2048 dut (
|
||||||
|
.aclk (aclk),
|
||||||
|
.aresetn (aresetn),
|
||||||
|
.s_axis_config_tdata (cfg_tdata),
|
||||||
|
.s_axis_config_tvalid (cfg_tvalid),
|
||||||
|
.s_axis_config_tready (cfg_tready),
|
||||||
|
.s_axis_data_tdata (din_tdata),
|
||||||
|
.s_axis_data_tvalid (din_tvalid),
|
||||||
|
.s_axis_data_tlast (din_tlast),
|
||||||
|
.s_axis_data_tready (din_tready),
|
||||||
|
.m_axis_data_tdata (dout_tdata),
|
||||||
|
.m_axis_data_tuser (dout_tuser),
|
||||||
|
.m_axis_data_tvalid (dout_tvalid),
|
||||||
|
.m_axis_data_tlast (dout_tlast),
|
||||||
|
.m_axis_data_tready (dout_tready)
|
||||||
|
);
|
||||||
|
|
||||||
|
// Continuously capture output frame
|
||||||
|
always @(posedge aclk) begin
|
||||||
|
if (aresetn && dout_tvalid && dout_tready && out_collected < N) begin
|
||||||
|
out_re[out_collected] <= $signed(dout_tdata[15:0]);
|
||||||
|
out_im[out_collected] <= $signed(dout_tdata[31:16]);
|
||||||
|
out_collected <= out_collected + 1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
// Send config (FWD = bit 0 = 1)
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
task send_config;
|
||||||
|
input fwd;
|
||||||
|
begin
|
||||||
|
@(posedge aclk);
|
||||||
|
cfg_tdata <= {7'b0, fwd};
|
||||||
|
cfg_tvalid <= 1'b1;
|
||||||
|
@(posedge aclk);
|
||||||
|
while (!cfg_tready) @(posedge aclk);
|
||||||
|
@(posedge aclk);
|
||||||
|
cfg_tvalid <= 1'b0;
|
||||||
|
end
|
||||||
|
endtask
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
// Stream N samples; src=0 DC, 1 impulse, 2 tone (bin K=128)
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
task stream_frame;
|
||||||
|
input integer src;
|
||||||
|
integer i;
|
||||||
|
real arg;
|
||||||
|
integer re16, im16;
|
||||||
|
begin
|
||||||
|
out_collected = 0;
|
||||||
|
@(posedge aclk);
|
||||||
|
din_tvalid <= 1'b1;
|
||||||
|
for (i = 0; i < N; i = i + 1) begin
|
||||||
|
case (src)
|
||||||
|
0: begin re16 = 10000; im16 = 0; end
|
||||||
|
1: begin re16 = (i == 0) ? 10000 : 0; im16 = 0; end
|
||||||
|
2: begin
|
||||||
|
arg = 6.2831853 * 128.0 * i / N;
|
||||||
|
re16 = $rtoi(10000.0 * $cos(arg));
|
||||||
|
im16 = $rtoi(10000.0 * $sin(arg));
|
||||||
|
end
|
||||||
|
default: begin re16 = 0; im16 = 0; end
|
||||||
|
endcase
|
||||||
|
din_tdata <= {im16[15:0], re16[15:0]};
|
||||||
|
din_tlast <= (i == N-1);
|
||||||
|
@(posedge aclk);
|
||||||
|
while (!din_tready) @(posedge aclk);
|
||||||
|
end
|
||||||
|
din_tvalid <= 1'b0;
|
||||||
|
din_tlast <= 1'b0;
|
||||||
|
end
|
||||||
|
endtask
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
// Wait until the full output frame has been captured (out_collected == N)
|
||||||
|
// or a deadline elapses.
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
task wait_frame;
|
||||||
|
input integer max_cycles;
|
||||||
|
integer t;
|
||||||
|
begin
|
||||||
|
t = 0;
|
||||||
|
while (out_collected < N && t < max_cycles) begin
|
||||||
|
@(posedge aclk);
|
||||||
|
t = t + 1;
|
||||||
|
end
|
||||||
|
if (out_collected < N) begin
|
||||||
|
$display("[FAIL] Timed out collecting frame: got %0d / %0d after %0d cycles",
|
||||||
|
out_collected, N, t);
|
||||||
|
fail_count = fail_count + 1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
endtask
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
// Locate peak |Re|+|Im| bin in captured frame
|
||||||
|
// ----------------------------------------------------------------
|
||||||
|
task analyze_frame;
|
||||||
|
output integer pk_bin;
|
||||||
|
output integer pk_mag;
|
||||||
|
output integer mean_other;
|
||||||
|
integer i, mag, sum;
|
||||||
|
begin
|
||||||
|
pk_bin = 0;
|
||||||
|
pk_mag = 0;
|
||||||
|
sum = 0;
|
||||||
|
for (i = 0; i < N; i = i + 1) begin
|
||||||
|
mag = (out_re[i] < 0 ? -out_re[i] : out_re[i])
|
||||||
|
+ (out_im[i] < 0 ? -out_im[i] : out_im[i]);
|
||||||
|
if (mag > pk_mag) begin
|
||||||
|
pk_mag = mag;
|
||||||
|
pk_bin = i;
|
||||||
|
end
|
||||||
|
sum = sum + mag;
|
||||||
|
end
|
||||||
|
mean_other = (sum - pk_mag) / (N - 1);
|
||||||
|
end
|
||||||
|
endtask
|
||||||
|
|
||||||
|
task check;
|
||||||
|
input cond;
|
||||||
|
input [511:0] label;
|
||||||
|
begin
|
||||||
|
test_num = test_num + 1;
|
||||||
|
if (cond) begin
|
||||||
|
$display("[PASS] T%0d: %0s", test_num, label);
|
||||||
|
pass_count = pass_count + 1;
|
||||||
|
end else begin
|
||||||
|
$display("[FAIL] T%0d: %0s", test_num, label);
|
||||||
|
fail_count = fail_count + 1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
endtask
|
||||||
|
|
||||||
|
initial begin
|
||||||
|
$dumpfile("tb_xfft_2048_xsim.vcd");
|
||||||
|
$dumpvars(0, tb_xfft_2048_xsim);
|
||||||
|
|
||||||
|
cfg_tdata = 0;
|
||||||
|
cfg_tvalid = 0;
|
||||||
|
din_tdata = 0;
|
||||||
|
din_tvalid = 0;
|
||||||
|
din_tlast = 0;
|
||||||
|
dout_tready = 1; // Always accept output
|
||||||
|
out_collected = 0;
|
||||||
|
|
||||||
|
repeat (10) @(posedge aclk);
|
||||||
|
aresetn = 1'b1;
|
||||||
|
repeat (10) @(posedge aclk);
|
||||||
|
|
||||||
|
// ============================================================
|
||||||
|
// T1: DC stimulus → expect peak at bin 0
|
||||||
|
// ============================================================
|
||||||
|
$display("\n--- DC stimulus ---");
|
||||||
|
send_config(1'b1);
|
||||||
|
stream_frame(0);
|
||||||
|
wait_frame(20000);
|
||||||
|
analyze_frame(peak_bin, peak_mag, mean_others);
|
||||||
|
$display(" peak_bin=%0d peak_mag=%0d mean_others=%0d tuser=0x%h",
|
||||||
|
peak_bin, peak_mag, mean_others, dout_tuser);
|
||||||
|
check(peak_bin == 0, "DC -> peak at bin 0");
|
||||||
|
check(peak_mag > 8 * mean_others + 1, "DC -> peak/mean > 8x");
|
||||||
|
|
||||||
|
// ============================================================
|
||||||
|
// T2: Impulse → expect roughly flat magnitude
|
||||||
|
// ============================================================
|
||||||
|
$display("\n--- Impulse stimulus ---");
|
||||||
|
send_config(1'b1);
|
||||||
|
stream_frame(1);
|
||||||
|
wait_frame(20000);
|
||||||
|
analyze_frame(peak_bin, peak_mag, mean_others);
|
||||||
|
$display(" peak_bin=%0d peak_mag=%0d mean_others=%0d tuser=0x%h",
|
||||||
|
peak_bin, peak_mag, mean_others, dout_tuser);
|
||||||
|
// For an impulse at sample 0, |X[k]| is constant; peak/mean ratio
|
||||||
|
// close to 1. Allow up to 3x to account for bit-width quantization.
|
||||||
|
check(peak_mag < 3 * mean_others + 100,
|
||||||
|
"Impulse -> flat spectrum (peak < 3x mean)");
|
||||||
|
|
||||||
|
// ============================================================
|
||||||
|
// T3: Complex tone at bin 128 → expect peak at bin 128
|
||||||
|
// ============================================================
|
||||||
|
$display("\n--- Tone (bin 128) stimulus ---");
|
||||||
|
send_config(1'b1);
|
||||||
|
stream_frame(2);
|
||||||
|
wait_frame(20000);
|
||||||
|
analyze_frame(peak_bin, peak_mag, mean_others);
|
||||||
|
$display(" peak_bin=%0d peak_mag=%0d mean_others=%0d tuser=0x%h",
|
||||||
|
peak_bin, peak_mag, mean_others, dout_tuser);
|
||||||
|
check(peak_bin == 128, "Tone -> peak at bin 128");
|
||||||
|
check(peak_mag > 8 * mean_others + 1, "Tone -> peak/mean > 8x");
|
||||||
|
|
||||||
|
$display("");
|
||||||
|
$display("============================================");
|
||||||
|
$display(" XFFT_2048 (Xilinx LogiCORE) XSim RESULTS");
|
||||||
|
$display(" PASSED: %0d / %0d", pass_count, test_num);
|
||||||
|
$display(" FAILED: %0d / %0d", fail_count, test_num);
|
||||||
|
if (fail_count == 0)
|
||||||
|
$display(" ** ALL TESTS PASSED **");
|
||||||
|
else
|
||||||
|
$display(" ** %0d TEST(S) FAILED **", fail_count);
|
||||||
|
$display("============================================");
|
||||||
|
|
||||||
|
#100;
|
||||||
|
$finish;
|
||||||
|
end
|
||||||
|
|
||||||
|
// Global timeout — never let the sim run forever
|
||||||
|
initial begin
|
||||||
|
#2000000; // 2 ms
|
||||||
|
$display("[FAIL] Global timeout @ 2 ms");
|
||||||
|
$finish;
|
||||||
|
end
|
||||||
|
|
||||||
|
endmodule
|
||||||
282
9_Firmware/9_2_FPGA/xfft_2048.v
Normal file
282
9_Firmware/9_2_FPGA/xfft_2048.v
Normal file
@@ -0,0 +1,282 @@
|
|||||||
|
`timescale 1ns / 1ps
|
||||||
|
// ============================================================================
|
||||||
|
// xfft_2048.v — 2048-point FFT wrapper (Xilinx LogiCORE for synth/XSim,
|
||||||
|
// in-house fft_engine fallback for iverilog)
|
||||||
|
// ============================================================================
|
||||||
|
// AXI-Stream port list mirrors Xilinx LogiCORE Fast Fourier Transform v9.1
|
||||||
|
// (PG109). Two implementation branches selected by `FFT_USE_XILINX_IP`:
|
||||||
|
//
|
||||||
|
// `define FFT_USE_XILINX_IP → instantiates xfft_2048_ip (LogiCORE FFT v9.1)
|
||||||
|
// Pipelined Streaming I/O, BFP scaling, 16-bit.
|
||||||
|
// Use for: Vivado synth, remote XSim sim.
|
||||||
|
//
|
||||||
|
// `undef FFT_USE_XILINX_IP → instantiates fft_engine batched one-shot
|
||||||
|
// (collect N → compute → drain N).
|
||||||
|
// Use for: iverilog local sim only.
|
||||||
|
//
|
||||||
|
// Throughput on production silicon (Xilinx IP path): ~N + ~150 cycles per
|
||||||
|
// transform with full overlap → ~6600 cycles for 3 sequential transforms in
|
||||||
|
// the matched-filter chain, vs the 16700-cycle PRI budget. Closes RX-NEW-3.
|
||||||
|
//
|
||||||
|
// Data format: {Q[15:0], I[15:0]} packed 32-bit on s_axis/m_axis_data_tdata.
|
||||||
|
// Config tdata[0]: 1 = forward FFT, 0 = inverse FFT (matches PG109 convention).
|
||||||
|
//
|
||||||
|
// Block-FP scaling (Xilinx path only): per-frame BLK_EXP returned via
|
||||||
|
// m_axis_data_tuser[7:0] so chain-level normalization can rescale before
|
||||||
|
// magnitude compute. Sim path always returns tuser = 0 (no BFP).
|
||||||
|
// ============================================================================
|
||||||
|
|
||||||
|
module xfft_2048 (
|
||||||
|
input wire aclk,
|
||||||
|
input wire aresetn,
|
||||||
|
|
||||||
|
// Configuration channel (AXI-Stream slave). 8-bit tdata; only bit 0
|
||||||
|
// (FWD/INV) is decoded by the IP in BFP mode (no scale schedule).
|
||||||
|
input wire [7:0] s_axis_config_tdata,
|
||||||
|
input wire s_axis_config_tvalid,
|
||||||
|
output wire s_axis_config_tready,
|
||||||
|
|
||||||
|
// Data input channel (AXI-Stream slave)
|
||||||
|
input wire [31:0] s_axis_data_tdata,
|
||||||
|
input wire s_axis_data_tvalid,
|
||||||
|
input wire s_axis_data_tlast,
|
||||||
|
output wire s_axis_data_tready,
|
||||||
|
|
||||||
|
// Data output channel (AXI-Stream master)
|
||||||
|
output wire [31:0] m_axis_data_tdata,
|
||||||
|
output wire [7:0] m_axis_data_tuser, // BLK_EXP[7:0] (Xilinx path); 0 (sim)
|
||||||
|
output wire m_axis_data_tvalid,
|
||||||
|
output wire m_axis_data_tlast,
|
||||||
|
input wire m_axis_data_tready
|
||||||
|
);
|
||||||
|
|
||||||
|
`ifdef FFT_USE_XILINX_IP
|
||||||
|
// ============================================================================
|
||||||
|
// XILINX LOGICORE FFT v9.1 — production / XSim path
|
||||||
|
// ============================================================================
|
||||||
|
// Side-channels (status/event) are tied off here; if downstream needs them
|
||||||
|
// (e.g. for pipeline-stall debug), surface them through this wrapper.
|
||||||
|
|
||||||
|
wire [7:0] xfft_status_tdata;
|
||||||
|
wire xfft_status_tvalid;
|
||||||
|
|
||||||
|
xfft_2048_ip u_xfft (
|
||||||
|
.aclk (aclk),
|
||||||
|
.s_axis_config_tdata (s_axis_config_tdata),
|
||||||
|
.s_axis_config_tvalid (s_axis_config_tvalid),
|
||||||
|
.s_axis_config_tready (s_axis_config_tready),
|
||||||
|
.s_axis_data_tdata (s_axis_data_tdata),
|
||||||
|
.s_axis_data_tvalid (s_axis_data_tvalid),
|
||||||
|
.s_axis_data_tready (s_axis_data_tready),
|
||||||
|
.s_axis_data_tlast (s_axis_data_tlast),
|
||||||
|
.m_axis_data_tdata (m_axis_data_tdata),
|
||||||
|
.m_axis_data_tuser (m_axis_data_tuser),
|
||||||
|
.m_axis_data_tvalid (m_axis_data_tvalid),
|
||||||
|
.m_axis_data_tready (m_axis_data_tready),
|
||||||
|
.m_axis_data_tlast (m_axis_data_tlast),
|
||||||
|
.m_axis_status_tdata (xfft_status_tdata),
|
||||||
|
.m_axis_status_tvalid (xfft_status_tvalid),
|
||||||
|
.m_axis_status_tready (1'b1),
|
||||||
|
.event_frame_started (),
|
||||||
|
.event_tlast_unexpected (),
|
||||||
|
.event_tlast_missing (),
|
||||||
|
.event_status_channel_halt (),
|
||||||
|
.event_data_in_channel_halt (),
|
||||||
|
.event_data_out_channel_halt ()
|
||||||
|
);
|
||||||
|
|
||||||
|
`else
|
||||||
|
// ============================================================================
|
||||||
|
// FALLBACK — fft_engine batched one-shot (iverilog path only)
|
||||||
|
// ============================================================================
|
||||||
|
// Collect N samples → kick fft_engine → drain N samples. Throughput is
|
||||||
|
// ~N (collect) + ~160 K (compute) + ~N (drain). NOT representative of the
|
||||||
|
// real LogiCORE — used only for unit-level iverilog regression coverage.
|
||||||
|
// ============================================================================
|
||||||
|
|
||||||
|
localparam N = 2048;
|
||||||
|
localparam LOG2N = 11;
|
||||||
|
localparam CNT_W = LOG2N + 1;
|
||||||
|
|
||||||
|
localparam [2:0] S_IDLE = 3'd0,
|
||||||
|
S_FEED = 3'd1,
|
||||||
|
S_RUN = 3'd2,
|
||||||
|
S_OUTPUT = 3'd3;
|
||||||
|
|
||||||
|
reg [2:0] state;
|
||||||
|
reg inverse_reg;
|
||||||
|
|
||||||
|
(* ram_style = "block" *) reg signed [15:0] in_buf_re [0:N-1];
|
||||||
|
(* ram_style = "block" *) reg signed [15:0] in_buf_im [0:N-1];
|
||||||
|
(* ram_style = "block" *) reg signed [15:0] out_buf_re [0:N-1];
|
||||||
|
(* ram_style = "block" *) reg signed [15:0] out_buf_im [0:N-1];
|
||||||
|
|
||||||
|
reg [CNT_W-1:0] in_count;
|
||||||
|
reg [CNT_W-1:0] feed_count;
|
||||||
|
reg [CNT_W-1:0] out_total;
|
||||||
|
reg [CNT_W-1:0] out_count;
|
||||||
|
|
||||||
|
reg fft_start;
|
||||||
|
reg fft_inverse;
|
||||||
|
reg signed [15:0] fft_din_re, fft_din_im;
|
||||||
|
reg fft_din_valid;
|
||||||
|
wire signed [15:0] fft_dout_re, fft_dout_im;
|
||||||
|
wire fft_dout_valid;
|
||||||
|
wire fft_busy;
|
||||||
|
wire fft_done;
|
||||||
|
|
||||||
|
reg in_buf_we;
|
||||||
|
reg [LOG2N-1:0] in_buf_waddr;
|
||||||
|
reg signed [15:0] in_buf_wdata_re, in_buf_wdata_im;
|
||||||
|
reg out_buf_we;
|
||||||
|
reg [LOG2N-1:0] out_buf_waddr;
|
||||||
|
reg signed [15:0] out_buf_wdata_re, out_buf_wdata_im;
|
||||||
|
|
||||||
|
reg signed [15:0] out_rd_re, out_rd_im;
|
||||||
|
reg out_rd_valid;
|
||||||
|
|
||||||
|
fft_engine #(
|
||||||
|
.N(N), .LOG2N(LOG2N), .DATA_W(16), .INTERNAL_W(32),
|
||||||
|
.TWIDDLE_W(16), .TWIDDLE_FILE("fft_twiddle_2048.mem")
|
||||||
|
) fft_core (
|
||||||
|
.clk(aclk), .reset_n(aresetn),
|
||||||
|
.start(fft_start), .inverse(fft_inverse),
|
||||||
|
.din_re(fft_din_re), .din_im(fft_din_im), .din_valid(fft_din_valid),
|
||||||
|
.dout_re(fft_dout_re), .dout_im(fft_dout_im), .dout_valid(fft_dout_valid),
|
||||||
|
.busy(fft_busy), .done(fft_done)
|
||||||
|
);
|
||||||
|
|
||||||
|
assign s_axis_config_tready = (state == S_IDLE);
|
||||||
|
assign s_axis_data_tready = (state == S_FEED) && (in_count < N);
|
||||||
|
assign m_axis_data_tdata = {out_rd_im, out_rd_re};
|
||||||
|
assign m_axis_data_tuser = 8'h00; // No BFP in fallback path
|
||||||
|
assign m_axis_data_tvalid = out_rd_valid;
|
||||||
|
assign m_axis_data_tlast = out_rd_valid && (out_count == N);
|
||||||
|
|
||||||
|
always @(posedge aclk) begin
|
||||||
|
if (in_buf_we) begin
|
||||||
|
in_buf_re[in_buf_waddr] <= in_buf_wdata_re;
|
||||||
|
in_buf_im[in_buf_waddr] <= in_buf_wdata_im;
|
||||||
|
end
|
||||||
|
if (out_buf_we) begin
|
||||||
|
out_buf_re[out_buf_waddr] <= out_buf_wdata_re;
|
||||||
|
out_buf_im[out_buf_waddr] <= out_buf_wdata_im;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
always @(posedge aclk or negedge aresetn) begin
|
||||||
|
if (!aresetn) begin
|
||||||
|
state <= S_IDLE;
|
||||||
|
inverse_reg <= 1'b0;
|
||||||
|
in_count <= 0;
|
||||||
|
feed_count <= 0;
|
||||||
|
out_total <= 0;
|
||||||
|
out_count <= 0;
|
||||||
|
fft_start <= 1'b0;
|
||||||
|
fft_inverse <= 1'b0;
|
||||||
|
fft_din_re <= 0;
|
||||||
|
fft_din_im <= 0;
|
||||||
|
fft_din_valid <= 1'b0;
|
||||||
|
in_buf_we <= 1'b0;
|
||||||
|
in_buf_waddr <= 0;
|
||||||
|
in_buf_wdata_re <= 0;
|
||||||
|
in_buf_wdata_im <= 0;
|
||||||
|
out_buf_we <= 1'b0;
|
||||||
|
out_buf_waddr <= 0;
|
||||||
|
out_buf_wdata_re <= 0;
|
||||||
|
out_buf_wdata_im <= 0;
|
||||||
|
out_rd_re <= 0;
|
||||||
|
out_rd_im <= 0;
|
||||||
|
out_rd_valid <= 1'b0;
|
||||||
|
end else begin
|
||||||
|
fft_start <= 1'b0;
|
||||||
|
fft_din_valid <= 1'b0;
|
||||||
|
in_buf_we <= 1'b0;
|
||||||
|
out_buf_we <= 1'b0;
|
||||||
|
|
||||||
|
case (state)
|
||||||
|
S_IDLE: begin
|
||||||
|
in_count <= 0;
|
||||||
|
feed_count <= 0;
|
||||||
|
out_total <= 0;
|
||||||
|
out_count <= 0;
|
||||||
|
out_rd_valid <= 1'b0;
|
||||||
|
if (s_axis_config_tvalid) begin
|
||||||
|
inverse_reg <= ~s_axis_config_tdata[0];
|
||||||
|
state <= S_FEED;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_FEED: begin
|
||||||
|
if (in_count < N) begin
|
||||||
|
if (s_axis_data_tvalid) begin
|
||||||
|
in_buf_we <= 1'b1;
|
||||||
|
in_buf_waddr <= in_count[LOG2N-1:0];
|
||||||
|
in_buf_wdata_re <= s_axis_data_tdata[15:0];
|
||||||
|
in_buf_wdata_im <= s_axis_data_tdata[31:16];
|
||||||
|
in_count <= in_count + 1;
|
||||||
|
end
|
||||||
|
end else begin
|
||||||
|
fft_start <= 1'b1;
|
||||||
|
fft_inverse <= inverse_reg;
|
||||||
|
feed_count <= 0;
|
||||||
|
out_total <= 0;
|
||||||
|
state <= S_RUN;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_RUN: begin
|
||||||
|
if (feed_count < N) begin
|
||||||
|
fft_din_re <= in_buf_re[feed_count[LOG2N-1:0]];
|
||||||
|
fft_din_im <= in_buf_im[feed_count[LOG2N-1:0]];
|
||||||
|
fft_din_valid <= 1'b1;
|
||||||
|
feed_count <= feed_count + 1;
|
||||||
|
end
|
||||||
|
if (fft_dout_valid && out_total < N) begin
|
||||||
|
out_buf_we <= 1'b1;
|
||||||
|
out_buf_waddr <= out_total[LOG2N-1:0];
|
||||||
|
out_buf_wdata_re <= fft_dout_re;
|
||||||
|
out_buf_wdata_im <= fft_dout_im;
|
||||||
|
out_total <= out_total + 1;
|
||||||
|
end
|
||||||
|
if (fft_done && out_total >= N) begin
|
||||||
|
state <= S_OUTPUT;
|
||||||
|
out_count <= 0;
|
||||||
|
out_rd_valid <= 1'b0;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
S_OUTPUT: begin
|
||||||
|
if (m_axis_data_tready || !out_rd_valid) begin
|
||||||
|
if (out_count < N) begin
|
||||||
|
out_rd_re <= out_buf_re[out_count[LOG2N-1:0]];
|
||||||
|
out_rd_im <= out_buf_im[out_count[LOG2N-1:0]];
|
||||||
|
out_rd_valid <= 1'b1;
|
||||||
|
out_count <= out_count + 1;
|
||||||
|
end else begin
|
||||||
|
out_rd_valid <= 1'b0;
|
||||||
|
state <= S_IDLE;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
default: state <= S_IDLE;
|
||||||
|
endcase
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
`ifdef SIMULATION
|
||||||
|
integer init_k;
|
||||||
|
initial begin
|
||||||
|
for (init_k = 0; init_k < N; init_k = init_k + 1) begin
|
||||||
|
in_buf_re[init_k] = 0;
|
||||||
|
in_buf_im[init_k] = 0;
|
||||||
|
out_buf_re[init_k] = 0;
|
||||||
|
out_buf_im[init_k] = 0;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
`endif
|
||||||
|
|
||||||
|
`endif // FFT_USE_XILINX_IP
|
||||||
|
|
||||||
|
endmodule
|
||||||
Reference in New Issue
Block a user