TestCarstoreConcurrentWritesTwoOpeners failed in CI on 2026-09-13 with
"database is locked" while the code was correct. It hammered the file with
five concurrent writers and asserted that no lock error surfaced within the
5 s busy_timeout, which on a loaded runner with every package testing in
parallel is a statement about the disk, not the code. The property it guards
(busy_timeout applied to every connection of every pool on a hold database,
c44a874) is now tested directly: one connection holds the write lock via
BEGIN IMMEDIATE, a second writer is shown to block rather than fail, and to
succeed once the lock is released. Both topologies are covered (the shared
OpenHoldDB pool, and a second opener on the same file, in both directions),
and a control shows a pool without busy_timeout fails immediately under the
same lock, so the passing tests are known to observe the mechanism.
The failure was also buried under the INFO lines every hold and PDS test
emits while booting. internal/testlog.Quiet swaps the default slog handler
for a discard handler unless the run is verbose or ATCR_TEST_LOGS is set,
and every package that produced that output now calls it from TestMain.
`go test` only shows a package's output when it fails, so this changes
nothing for passing runs and leaves a failing one readable.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hho5da4daoCoPBJ9tCrL7s
a7569a7 added credential-less pulls of public images. Three things about it
were wrong, all of them in how the appview handled the decision that belongs
to the hold.
**Scope handling was all-or-nothing.** IsPullOnlyScope required every
requested action to already be "pull", but clients routinely ask for more
than the operation needs — pull,push is common for a plain read, and some
ask for pull,push,delete up front. Those were rejected and challenged,
leaving a credential-less client no way to pull even a public image, which
is the entire feature. NarrowToPullOnly drops the write actions and issues a
token carrying "pull" and nothing else. Granting a subset is what the
distribution token spec expects. The allowlist property is preserved: "pull"
is the only action that survives, and "*" is deliberately not expanded into
it, since a wildcard request is not evidence the caller wants a read.
**The appview-side read gate was inert.** checkReadAccess passed p.ctx.DID,
the DID of the repository *owner*, not the requester. Any non-empty DID
satisfies a private hold's check, and the owner's is never empty, so it asked
"may the owner read their own hold", answered yes, and admitted everyone.
Worse, CheckReadAccessWithCaptain admitted any authenticated DID to a private
hold at all, on an explicitly-MVP assumption that holding a DID was close
enough to being a sailor. Every doc says otherwise (docs/hold.md:109 "Crew
with blob:read", CLAUDE.md:140, docs/BYOS.md:280) and so does the hold
(ValidateBlobReadAccess: owner, or crew carrying blob:read/blob:write). It
now takes isCrew and requires owner-or-crew, and callers only pay for the
crew lookup when it can change the answer — a public hold or an anonymous
caller is decided by the captain record alone. Nothing here loosens access;
it brings the local gate into agreement with the authority.
**Denials could not reach the client.** distribution's blobHandler.GetBlob
maps everything except ErrBlobUnknown to ErrorCodeUnknown, so a 401 raised
in the blob store left as a 500 — misreporting an auth failure as a server
fault, and giving BearerChallenge no 401 to attach WWW-Authenticate to, so
Docker was told "server error" instead of being prompted for credentials.
Clients that retry 5xx looped: 4.1s per case in the matrix, now 0.01s. The
check moves to Repository(), where an errcode.Error is passed through
verbatim by the registry app — the same mechanism a7569a7 used for
NAME_UNKNOWN. It fails open on a lookup error, since the hold is the
authority and a transient failure should not break public pulls.
Removes auth.allow_anonymous_pull. It could only ever withhold — captain.Public
is what grants — so it was a second flag for a decision the hold already owns,
and gating it appview-side was never the intent. Layer bytes 307 straight to
S3, so the appview is not even in the path whose cost might have justified an
operator-side lever.
Tests: TestAuthMatrix only ever ran against a public hold, and its pull cases
never fetched a layer — crane.Pull is lazy and img.Digest() needs only the
manifest, which ATCR serves from the user's PDS where it is world-readable, so
no pull row in the matrix touched blob authorization at all. Pulls now
materialize layer bytes, and testharness.WithPrivateHold plus
TestAuthMatrixPrivateHold cover public:false + allow_all_crew:true — the
production shape, where anyone with an account pulls and pushes and anonymous
gets nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Evan JarrettandClaude Fable 5.1