server.test_mode survived the build-tag refactor only to feed five
behavioral branches: the registry's fall-back to the default hold when
the user's hold is unreachable, backfill warning suppression for
external holds, the appview listener close on shutdown, the hold's
relay-crawl skip, and the hold's appview-issuer tolerance. Every one of
them is a "this is a local development build" decision, which is what
the tag already says, and local development has to build with the tag
or nothing resolves. So they read atproto.TestModeBuild now, and the
flag, SetTestMode, IsTestMode, the middleware option, the backfill
constructor parameter, the never-read field on RemoteHoldAuthorizer,
the example and template YAML lines, and the docker-compose env vars
are gone. The registry keeps the fallback as a field seeded from the
constant so the production-path tests can pin it off under the tag.
The 24 SetTestMode calls in tests were dead already: stripping them and
running the affected packages tagged changed nothing.
Tests that resolve a loopback did:web used to t.Fatal naming the tag,
which left a bare `go test ./...` permanently red in five packages.
They now live under `//go:build testmode`: whole-file constraints where
every test needs it, and sibling *_testmode_test.go files holding the
moved tests plus their fixtures where a file mixed. The harness carries
the constraint too, with its package doc in an untagged doc.go so the
package still exists without it. An untagged run compiles those tests
out and passes; make test keeps the tag and runs everything.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UwYzaG3Yy7uA8FbZ5qk3tQ
seamark.dev's /install and /settings/devices told users to pipe
seamark.dev/static/install.sh into bash. That file was the unmodified ATCR
script: it announced itself as the "ATCR Credential Helper Installer",
installed docker-credential-atcr, and finished by telling the user to configure
credHelpers for atcr.io, the wrong registry for that deployment. Anyone
following the documented setup ended up pointed at another service. The
templates hardcoded docker-credential-atcr, "atcr" and ~/.atcr/device.json
alongside a correctly themed {{ .RegistryURL }}.
The scripts are now rendered from config by a handler, rather than forked per
brand. A theme overlay was the alternative and was worse: it needed a full copy
of both install.sh and install.ps1 per brand, four scripts to keep in sync, and
the operator asked for these values to come from config.
credential_helper.name is the single knob. Docker resolves a credHelpers value
x by exec'ing docker-credential-x, so the credHelpers value, the binary suffix
and the config directory are genuinely one word, not three that can drift. It
is validated against a strict pattern because it is interpolated into a shell
script.
install.sh renders byte-identical to the deleted static file under the atcr
default, so existing installs are unaffected. install.ps1 differs by one line,
where a stale usage comment named a path the script is not served at.
Two behaviour changes worth noting: these two URLs drop from a one-year
Cache-Control to five minutes, since the body now depends on deployment config;
and credential_helper.tangled_repo becomes a real overridable default. It was
previously assigned over unconditionally and read by nothing, while the shipped
script used a different URL form.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PDqoCE1j3njokkZ9b1C5n9
DELETE /v2/<name>/manifests/<ref> answered UNSUPPORTED before ever
reaching the ATProto-backed stores: distribution v3.1.1's DeleteManifest
handler short-circuits unless app.deleteEnabled is set, which comes from
storage.delete.enabled. Set it (mirrored in the test harness). The
companion storage.EnableDelete option it appends only affects
distribution's built-in store, which RoutingRepository replaces, so it is
a no-op for us.
With the route reachable, make the stores do the right thing:
- ManifestStore.Delete purges the hold's per-layer, scan and image
config records on a detached context, since the DELETE handler
returns immediately and cancels the request context.
- TagStore.Untag resolves the digest before deleting the tag record,
then deletes the manifest if that was its last tag and it is not a
manifest list child, matching the web UI's delete-tag behavior so
deleting an only-tagged image doesn't orphan the manifest.
- cleanupUntaggedManifest becomes package-level over *RegistryContext
so both stores share one implementation.
- purgeOnHold moves out of handlers into pkg/appview/holdpurge so the
storage layer can call it: handlers already depends on storage via
middleware, so storage to handlers would be an import cycle.
- ProxyBlobStore.Delete returns distribution.ErrUnsupported, so the
always-registered blob DELETE route gives a clean OCI UNSUPPORTED
error instead of a generic 500. Layer bytes are reclaimed by the
hold's refcounted GC.
The cascade's still-tagged re-check pages through the tag records rather
than reading a single capped page. Tags for all of a user's repositories
share one collection, so one page is a per-account budget: past ~100 tags
a live tag fell off the end and the manifest was deleted while still
referenced. Incomplete enumeration now skips the delete, since an
orphaned manifest is recoverable and a deleted live one is not.
This also makes the over-quota delete grant added in 6e426dc load-bearing:
it hands out pull,delete tokens, which could not do anything while
distribution rejected every DELETE.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An AppView can front several registry domains that all reach the same
backend (seamark.dev serving buoy.cr, seamark.cr, and soon atcr.io).
Distribution's token access controller holds `service` as a single string
and uses it twice: as the value advertised in the WWW-Authenticate
challenge, and as the sole accepted JWT audience. So it announced one
domain's name on every domain, and honoured one domain's tokens
everywhere. A push to seamark.cr was challenged with service="buoy.cr".
Both uses sit inside Authorized, which already has the request, but the
value is fixed at construction and reachable through no hook — autoredirect
only templates the realm. So register an "atcr-token" controller that
builds one upstream controller per domain and dispatches on r.Host. Each
front door now advertises its own name and demands its own audience. All
signature, certificate and claim verification stays in upstream code; this
only routes.
The token handler stops discarding ?service= and stamps the audience with
the front door the client used, allowlist-checked against the configured
domains so the value stays server-determined despite arriving from the
client. It has to come from the query param because the realm lives on the
UI host, where r.Host names no registry domain.
This is token hygiene and spec conformance, not a privilege boundary: every
domain fronts the same backend, so a client can obtain a token for any of
them just by handshaking there. What it buys is a truthful challenge and
the decoupling needed to later split a domain onto its own AppView.
Also unify the domain list. DomainRoutingMiddleware keyed its map on the
raw config while matching a port-stripped host, so a domain configured with
a port could never match its own requests. It now shares the normalized
cfg.Auth.Services, so routing and authorization agree on one set of names.
cfg.Auth.ServiceName was an exact alias for Services[0] and is replaced by
PrimaryService(), which also removes an empty-slice index.
Rollout: the audience for seamark.cr and bouy.cr changes, so a token minted
just before the restart draws one 401 and Docker re-handshakes into a valid
one. buoy.cr is unchanged (it stays primary), and atcr.io keeps the service
name it already has today. The challenge and the accepted audience come
from the same delegate, so the retry converges by construction. Deploy as a
single flip, not a canary: an old instance ignores ?service= and would keep
minting the primary audience while a new one rejects it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
1. Multiple registry domains + per-user domain preference
The biggest feature. The appview can serve several registry domains (e.g. buoy.cr, atcr.io),
and users can now pick which one shows up in their pull/push commands.
- Lexicon/record: adds registryDomain (and documents ociClient)
to the sailor profile (lexicons/.../profile.json, pkg/atproto/lexicon.go).
- DB: new registry_domain column on users (schema.sql + migration 0027),
with GetUserByDID/Handle reads, UpdateUserRegistryDomain writer,
and Jetstream caching it on profile updates (writes unconditionally so clearing propagates).
- UI/handlers: new UpdateRegistryDomainHandler + /api/profile/registry-domain route,
a <select> in the user settings panel (only shown when >1 domain configured), and resolveRegistryURL()
which falls back to the primary domain if the user's pref is stale/removed. Tests added for all of it.
2. default_hold_did removed → first managed_holds entry is the default
Consolidates two overlapping config fields into one. ServerConfig.DefaultHoldDID is gone;
PrimaryHoldDID() now returns managed_holds[0]. managed_holds is now REQUIRED.
Updated in config, validation, server wiring, test harness, example YAML, and the deploy template.
3. Admin long-running operations → generic background-job framework
New pkg/hold/admin/jobs.go introduces a reusable startJob/jobRegistry pattern
(a detached context.Background() job + a /admin/api/jobs/{key}/status polling endpoint).
This replaces the bespoke scan-backfill goroutine state machine, and now also wraps crew tier remap and crew import
all three previously looped synchronously on the request context and got 504'd/cancelled mid-run by the reverse proxy.
Forms switched from POST-redirect to htmx fragments (job_progress.html, job_result.html, crew_import_results.html)
the old crew_import_results.html page and scan_backfill_progress.html partial were deleted.
This is also captured as a new rule in CLAUDE.md.
4. Cascade-delete manifest on last-tag deletion
DeleteTagHandler now, after removing the last tag pointing to a digest, cascade-deletes the manifest itself
(PDS + DB + hold blob purge) — but only if it's not a child of a manifest list (multi-arch parent).
New GetTagDigest and ShouldCascadeDeleteManifest queries back it, plus cascade_delete_test.go.
Also switches tag rkey computation to the atproto.RepositoryTagToRKey helper.
5. Billing simplification
Drops the OwnerBadge config option (hold-owner supporter badge).
The user-profile template no longer special-cases an "owner" badge value (only "Captain").
Example tiers renamed to the nautical scheme (deckhand/bosun/quartermaster).
6. Build/deploy: go generate always runs via Make
make generate is now a phony target that always runs go generate ./... (regenerating cbor_gen, icon sprites, etc.),
and build-trixie depends on it. The deploy tooling (provision.go/update.go)
drops its own runGenerate calls since the Makefile handles it.
7. New cmd/firehose-tap tool (untracked)
A standalone CLI that subscribes to a com.atproto.sync.subscribeRepos endpoint and pretty-prints events,
with emphasis on Sync 1.1 compliance fields (per-op prev CIDs, commit prevData) and a --validate CI mode.
Fits with the recent "more sync1.1 compliant" commit.
Evan JarrettandClaude Fable 5.1