This fixes a small mistake in PR #1864. When the "pinniped login oidc"
CLI command is deciding if the RFC8693 token exchange is needed, it
should not look at the expiry of the ID token. This mistake would cause
the RFC8693 token exchange to happen when the OIDC provider is not
a Pinniped Supervisor, which would fail because most other providers
do not support that type of token exchange.
It does not matter if the current ID token is close to expiring when
deciding if the RFC8693 token exchange is needed, because the token
exchange is going to yield a new ID token anyway. It does matter if the
current ID token is close to expiring if the CLI decides that it is
not going to perform the token exchange, and this commit does not change
that logic.
In the RFC8693 token exchange, the CLI sends your access token and
receives in exchange a new cluster-scoped ID token.
Fix a bug in the CLI. Whenever the "pinniped login oidc" command was
planning to perform the RFC8693 token exchange, it failed to check if
the cached access token was still valid before performing the exchange,
which sends the access token. It instead checked if the cached ID token
was still valid, but that it not relevant in this situation because the
ID token is not going to be used for anything (instead the new ID token
returned by the RFC8693 token exchange will be used for auth).
This bug doesn't actually matter today, because the Supervisor-issued
access and ID tokens always both have the same 2-minute lifetimes.
However, future enhancements may cause them to have different lifetimes
in certain circumstances. Fixing this CLI bug now to prepare for those
potential future enhancements.
Skip showing the banner when the CLI does not know the IDP name
from the CLI args (which are typically encoded in the kubeconfig).
Co-authored-by: Joshua Casey <joshuatcasey@gmail.com>
- Upgrade Go used in CI from 1.19.0 to 1.19.1
- Upgrade all go.mod direct dependencies to latest available versions
- Upgrade distroless base image to latest available version
- Upgrade Go fips compiler to to latest available version
Note that upgrading the go-oidc library changed an error message
returned by that library, so update the places where tests were
expecting that error message.
Also fix some tests that were broken by bumping golang and dependencies
in the previous commits.
Note that in addition to changes made to satisfy the linter which do not
impact the behavior of the code, this commit also adds ReadHeaderTimeout
to all usages of http.Server to satisfy the linter (and because it
seemed like a good suggestion).
- For backwards compatibility with older Pinniped CLIs, the pinniped-cli
client does not need to request the username or groups scopes for them
to be granted. For dynamic clients, the usual OAuth2 rules apply:
the client must be allowed to request the scopes according to its
configuration, and the client must actually request the scopes in the
authorization request.
- If the username scope was not granted, then there will be no username
in the ID token, and the cluster-scoped token exchange will fail since
there would be no username in the resulting cluster-scoped ID token.
- The OIDC well-known discovery endpoint lists the username and groups
scopes in the scopes_supported list, and lists the username and groups
claims in the claims_supported list.
- Add username and groups scopes to the default list of scopes
put into kubeconfig files by "pinniped get kubeconfig" CLI command,
and the default list of scopes used by "pinniped login oidc" when
no list of scopes is specified in the kubeconfig file
- The warning header about group memberships changing during upstream
refresh will only be sent to the pinniped-cli client, since it is
only intended for kubectl and it could leak the username to the
client (which may not have the username scope granted) through the
warning message text.
- Add the user's username to the session storage as a new field, so that
during upstream refresh we can compare the original username from the
initial authorization to the refreshed username, even in the case when
the username scope was not granted (and therefore the username is not
stored in the ID token claims of the session storage)
- Bump the Supervisor session storage format version from 2 to 3
due to the username field being added to the session struct
- Extract commonly used string constants related to OIDC flows to api
package.
- Change some import names to make them consistent:
- Always import github.com/coreos/go-oidc/v3/oidc as "coreosoidc"
- Always import go.pinniped.dev/generated/latest/apis/supervisor/oidc
as "oidcapi"
- Always import go.pinniped.dev/internal/oidc as "oidc"
Just in case some future browser change sends some new kind of request
to our CLI, just ignore them by returning StatusMethodNotAllowed and
continuing to listen.
This is to support the new changes in Google Chrome v98 which now
performs CORS preflight requests for the Javascript form submission
on the Supervisor's login page, even though the form is being submitted
to a localhost listener.
For password based login on the CLI (i.e. no browser), this change
relaxes the response code check to allow for any redirect code
handled by the Go standard library. In the future, we can drop the
rewriteStatusSeeOtherToStatusFoundForBrowserless logic from the
server side code.
Signed-off-by: Monis Khan <mok@vmware.com>
Highlights from this dep bump:
1. Made a copy of the v0.4.0 github.com/go-logr/stdr implementation
for use in tests. We must bump this dep as Kube code uses a
newer version now. We would have to rewrite hundreds of test log
assertions without this copy.
2. Use github.com/felixge/httpsnoop to undo the changes made by
ory/fosite#636 for CLI based login flows. This is required for
backwards compatibility with older versions of our CLI. A
separate change after this will update the CLI to be more
flexible (it is purposefully not part of this change to confirm
that we did not break anything). For all browser login flows, we
now redirect using http.StatusSeeOther instead of http.StatusFound.
3. Drop plog.RemoveKlogGlobalFlags as klog no longer mutates global
process flags
4. Only bump github.com/ory/x to v0.0.297 instead of the latest
v0.0.321 because v0.0.298+ pulls in a newer version of
go.opentelemetry.io/otel/semconv which breaks k8s.io/apiserver.
We should update k8s.io/apiserver to use the newer code.
5. Migrate all code from k8s.io/apimachinery/pkg/util/clock to
k8s.io/utils/clock and k8s.io/utils/clock/testing
6. Delete testutil.NewDeleteOptionsRecorder and migrate to the new
kubetesting.NewDeleteActionWithOptions
7. Updated ExpectedAuthorizeCodeSessionJSONFromFuzzing caused by
fosite's new rotated_secrets OAuth client field. This new field
is currently not relevant to us as we have no private clients.
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the TLS config used by all pinniped components.
There are no configuration knobs associated with this change. Thus
this change tightens our static defaults.
There are four TLS config levels:
1. Secure (TLS 1.3 only)
2. Default (TLS 1.2+ best ciphers that are well supported)
3. Default LDAP (TLS 1.2+ with less good ciphers)
4. Legacy (currently unused, TLS 1.2+ with all non-broken ciphers)
Highlights per component:
1. pinniped CLI
- uses "secure" config against KAS
- uses "default" for all other connections
2. concierge
- uses "secure" config as an aggregated API server
- uses "default" config as a impersonation proxy API server
- uses "secure" config against KAS
- uses "default" config for JWT authenticater (mostly, see code)
- no changes to webhook authenticater (see code)
3. supervisor
- uses "default" config as a server
- uses "secure" config against KAS
- uses "default" config against OIDC IDPs
- uses "default LDAP" config against LDAP IDPs
Signed-off-by: Monis Khan <mok@vmware.com>
- If the upstream refresh fails, then fail the downstream refresh
- If the upstream refresh returns an ID token, then validate it (we
use its claims in the future, but not in this commit)
- If the upstream refresh returns a new refresh token, then save it
into the user's session in storage
- Pass the provider cache into the token handler so it can use the
cached providers to perform upstream refreshes
- Handle unexpected errors in the token handler where the user's session
does not contain the expected data. These should not be possible
in practice unless someone is manually editing the storage, but
handle them anyway just to be safe.
- Refactor to share the refresh code between the CLI and the token
endpoint by moving it into the UpstreamOIDCIdentityProviderI
interface, since the token endpoint needed it to be part of that
interface anyway
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
This may be a temporary fix. It switches the manual auth code prompt to use `promptForValue()` instead of `promptForSecret()`. The `promptForSecret()` function no longer supports cancellation (the v0.9.2 behavior) and the method of cancelling in `promptForValue()` is now based on running the blocking read in a background goroutine, which is allowed to block forever or leak (which is not important for our CLI use case).
This means that the authorization code is now visible in the user's terminal, but this is really not a big deal because of PKCE and the limited lifetime of an auth code.
The main goroutine now correctly waits for the "manual prompt" goroutine to clean up, which now includes printing the extra newline that would normally have been entered by the user in the manual flow.
The text of the manual login prompt is updated to be more concise and less scary (don't use the word "fail").
Signed-off-by: Matt Moyer <moyerm@vmware.com>
