Allow all tests to be skipped if SKIP_ALL_TESTS is 1.

tests/Bug_-_Display_length_at_magnitude_boundary_-_Bytes.test

@@ -4,6 +4,9 @@
 # 1MiB, described here:
 # http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=586763
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Bug_-_Display_length_at_magnitude_boundary_-_Rate.test

@@ -3,6 +3,9 @@
 # This is the same as the other display length at magnitude boundary check,
 # but for rate, not bytes transferred.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 # Dummy assignments for "shellcheck".
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Bug_-_Install_all_files.test

@@ -2,6 +2,9 @@
 #
 # Test that "make install" installs the expected minimum set of files.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--average-rate.test

@@ -3,6 +3,9 @@
 # Check that the average transfer rate counter changes, but not more than it
 # should.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--bits.test

@@ -2,6 +2,9 @@
 #
 # Check that the byte counter counts in bits when --bits is selected.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--buffer-percent.test

@@ -2,6 +2,9 @@
 #
 # Check that "--buffer-percent" displays correctly.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--bytes.test

@@ -2,6 +2,9 @@
 #
 # Check that the byte counter counts.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--eta_-_plausible_values.test

@@ -2,6 +2,9 @@
 #
 # Check that the estimated time counter counts.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--fineta_-_plausible_values.test

@@ -2,6 +2,9 @@
 #
 # Check that the estimated time counter can show the end time of day.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--last-written.test

@@ -2,6 +2,9 @@
 #
 # Check that "--last-written" works.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--numeric.test

@@ -2,6 +2,9 @@
 #
 # Check that numeric output outputs some percentages.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--numeric_--bytes.test

@@ -3,6 +3,9 @@
 # Check that numeric output gives a byte count instead of a percentage when
 # used with -b.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--numeric_--bytes_--line-mode.test

@@ -3,6 +3,9 @@
 # Check that numeric output shows line counts instead of percentages, when
 # used in line mode together with bytes mode.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Display_-_--numeric_--timer.test

@@ -2,6 +2,9 @@
 #
 # Check that numeric output gives a timer when used with -t.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--progress_-_basic_movement.test

@@ -2,6 +2,9 @@
 #
 # Check that the progress bar moves when data is coming in.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--progress_-_increasing.test

@@ -2,6 +2,9 @@
 #
 # Check that the progress bar increases in size when data is coming in.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--quiet.test

@@ -2,6 +2,9 @@
 #
 # Check that the -q option shuts everything up.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--rate_-_displayed_value_changes.test

@@ -2,6 +2,9 @@
 #
 # Check that the transfer rate counter changes.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Display_-_--timer_-_displayed_value_changes.test

@@ -2,6 +2,9 @@
 #
 # Check that the elapsed time counter does count up.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/General_-_--pidfile.test

@@ -3,6 +3,9 @@
 # Check that the process ID can be written to a file as described in the
 # manual.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/General_-_--size_argument_handling.test

@@ -2,6 +2,9 @@
 #
 # Check that size arguments are processed correctly.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 
 # Pass size argument $1 and check that the last reported number is $2.

tests/Integrity_-_Basic.test

@@ -2,6 +2,9 @@
 #
 # Check that data can be just passed straight through.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 
 inputString="TESTING"

tests/Integrity_-_Binary_data.test

@@ -3,6 +3,9 @@
 # Transfer a large chunk of data through pv and check data correctness
 # afterwards.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Integrity_-_From_bursty_source.test

@@ -3,6 +3,9 @@
 # Transfer a large chunk of data through pv using pipes, sending it in a
 # bursty fashion, and check data correctness afterwards.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Integrity_-_Large_file_support.test

@@ -2,6 +2,9 @@
 #
 # Make sure that files larger than 2GB are supported.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Integrity_-_On_output_pipe_close.test

@@ -2,6 +2,9 @@
 #
 # Check that there is no SIGPIPE or dropped data on bigger data transfers.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 
 # We nead GNU head. On some platforms it is named ghead instead of head.

tests/Integrity_-_When_adjusted_remotely.test

@@ -3,6 +3,9 @@
 # Try repeatedly messaging a transfer process, and make sure the data stays
 # intact.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Memory_safety_-_Basic.test

@@ -3,6 +3,9 @@
 # Run valgrind's memory checker against a process using various different
 # transfer options.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${sourcePath:?not set - call this from 'make check'}"
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Memory_safety_-_Process_title.test

@@ -3,6 +3,9 @@
 # Run valgrind's memory checker against a process that sets is process
 # title.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${sourcePath:?not set - call this from 'make check'}"
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Memory_safety_-_Remote_control_receiver.test

@@ -2,6 +2,9 @@
 #
 # Run valgrind's memory checker while receiving remote control commands.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${sourcePath:?not set - call this from 'make check'}"
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Memory_safety_-_Remote_control_sender.test

@@ -3,6 +3,9 @@
 # Run valgrind's memory checker while using remote control to control
 # another process.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${sourcePath:?not set - call this from 'make check'}"
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Memory_safety_-_Watchfd.test

@@ -3,6 +3,9 @@
 # Run valgrind's memory checker against a process using the --watchfd
 # option.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${sourcePath:?not set - call this from 'make check'}"
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"

tests/Modifiers_-_--direct-io.test

@@ -5,6 +5,9 @@
 # doesn't check that O_DIRECT is actually being used, it just checks that
 # data is not being corrupted.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Modifiers_-_--force.test

@@ -3,6 +3,9 @@
 # Check that the progress bar is produced when "--force" is used, and is not
 # when it is not, providing stderr is a file.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Modifiers_-_--interval.test

@@ -2,6 +2,9 @@
 #
 # Check that the update interval can be set.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Modifiers_-_--line-mode.test

@@ -2,6 +2,9 @@
 #
 # Check that line mode counts lines instead of bytes.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Modifiers_-_--size.test

@@ -2,6 +2,9 @@
 #
 # Check that "--size" affects the percentage shown.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 

tests/Modifiers_-_--size_from_file_size.test

@@ -3,6 +3,9 @@
 # Similar to the "--size" check but, instead, using another file's size with
 # "--size @".
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Modifiers_-_--sync.test

@@ -5,6 +5,9 @@
 # check that fdatasync() is actually being called, it just checks that data
 # is not being corrupted.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Terminal_-_Detect_width.test

@@ -2,6 +2,9 @@
 #
 # Check that the terminal width is detected on startup.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Transfer_-_--rate-limit.test

@@ -2,6 +2,9 @@
 #
 # A simple test of rate limiting.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 
 # Transfer 102 bytes at 100 bytes/sec. It should take at least 1 second.

tests/Transfer_-_--remote.test

@@ -2,6 +2,9 @@
 #
 # Try changing the format of a transfer remotely.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Transfer_-_--stop-at-size.test

@@ -2,6 +2,9 @@
 #
 # Make sure -S stops at the given size.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Watchfd_-_Multiple_descriptors.test

@@ -2,6 +2,9 @@
 #
 # Check that watching a process's file descriptors works as expected.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"

tests/Watchfd_-_Single_descriptor.test

@@ -2,6 +2,9 @@
 #
 # Check that watching a single file descriptor works as expected.
 
+# Allow all tests to be skipped, e.g. during a release build
+test "${SKIP_ALL_TESTS}" = "1" && exit 77
+
 true "${testSubject:?not set - call this from 'make check'}"
 true "${workFile1:?not set - call this from 'make check'}"
 true "${workFile2:?not set - call this from 'make check'}"