We can (somehow) get commands on an atio7 for which we've never had a PLOGI/PRLI.
How this happens, I don't know. Anyway, we stick a tentative entry in the PDB
and call the task thread to find the rest of the info. This includes, badly and
stupidly, searching for the N-port handle by asking the chip. Sometimes it's not
there. In that case, we terminate the command.
In restarting commands that arrive while we start up, have the watchdog
time call isp_task_thread- this gives us a bit of hysteresis.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@281 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Need to include linux/vmalloc.h. Showed up on PPC port.
- Fix complaints about using an uninitialized pointer.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@280 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Make 2100/2200 and 2300 cards also maintain a target mode port database.
For the 24XX, we have to find the IID, N-port handle and channel when we
get an ATIO7. For the other cards, we already have the channel and N-port
handle and Port IID of the initiator, but have to find the S_ID.
Do the isp_find_pdb_by_{sid,loopid} functions search backwards to minimize
search time.
Don't load fw images more than once per device type!
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@279 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Allow ISP_FC_GETDINFO callers to get target mode entries.
- Remove stray '`' from define and PPC is now working again.
- Fix a typo which had us loading 2322 f/w into a 2300. Oops.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@278 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Put RISC_CODE define in the firmware files.
Use the Linux 2.6 firmware loader support if available. This saves
close to 700K of useless code getting loaded otherwise.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@277 d57e44dd-8a1f-0410-8b47-8ef2f437770f
If we're in role=NONE, then make sure that isp_init code sets state to
INITSTATE anyway.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@275 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Note that asking for "prefer N-port and then Loop" with the 24XX seems to
cause the f/w to crash. So, don't do that.
Firmware crashes are now considered fatal and cause the HBA to be marked dead.
Now that we've avoided the f/w crash in isp_init_24xx, we can process
toplogy options.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@274 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Add some code to do special IOCBs (that can just be ignored if they show
up as status IOCBs)- this is for some performance testing infrastructure.
Add some performance testing stuff.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@273 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Don't use both WWNs in the ICB block unless they're not NAA==2. This makes us
more consistent with QLogic driver setups and thus more likely to fit into the
same zoning setups.
If we're getting a PDB and it's for the Fabric Controller, force a login
to it (just in case it logged out underneath us). Return 'not logged in'
for the 24XX in case the 24XX specific login state isn't in the range of
PLOGI_DONE to LOGGED IN.
Don't do local loop scans if we have more than one channel (NP-IV) and we're
in a FL-port topology- we just end up poking ourselves usually.
Make sure we set loopstate in a couple of places we missed so that we
try and get it again.
Add in the RESET DEVICE and ABORT COMMAND functions for the 24XX cards
(finally).
Fix a longstanding bug where were passing the wrong (off by one) output
pointer to isp_handle_other_response.
Change isp_async...ISPASYNC_CHANGE_NOTIFY to have N-port handle, nlstate and
reason included as we get these for free with PDB Changed stuff for the
24XX card. Eventually we should be able to edit single local PDB entry
states instead of doing a full eval.
Put in the put of a 24XX Task Management Function IOCB. There is no get because
the firmware doesn't return it when done- instead a status iocb is done.
There is no "FAST POST" flag for the 24XX- this is a NOACK flag which means
that there is no interrupt if all goes well.
Fix spelling mistakes.
In isp_add_wwn_entry, ahem, don't allocate PDB entries out of the 'rexerved
for chip' area.
Put more comments in as to why we're terminating an exchange (and make them
all ISP_LOGTINFO).
Add, finally, the correct handling for a QIN_NOTIFY_ACK for a task management
function- this means we construct a ct7_entry_t to get the firmware to send
an FC Response IU for it. So, finally LUN RESETS and TARGET RESETS and
ABORT TASK will actually work and, more importantly, be seen to be working
by initiators.
Fix WWN defaults/active generation and retrieval. It was broken.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@272 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Fix a comment typo. Force on HARD ADDRESS for the 24XX.
Fix retry on error case- most of the time we *don't* want to retry a command
sent back with TDFL_ERROR set- instead we want to set PARITY ERROR as a
CA condition and just FIN the cmd.
Comment for r270:
1. A major botch for local loop handling - we were never getting past loopid zero
in isp_scan_loop. Bad doggie!
2. *Do* scan our loopid- this seems to allow us to find entities which are there
and have a N-port handle that is identical to ours. I have no idea how the QLogic
sorts this out. At least, this is how it seems to work for the 24XX in local loop
mode.
Don't deadlock with the HBA lock when performing a rescan ioctl. Also,
mark the loop state as if we'd just received a PDB event- that way
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@271 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Fix a comment typo. Force on HARD ADDRESS for the 24XX.
Fix retry on error case- most of the time we *don't* want to retry a command
sent back with TDFL_ERROR set- instead we want to set PARITY ERROR as a
CA condition and just FIN the cmd.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@270 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Add ASYNC_RCV_ERR
- Allow LIP to have a (possible) channel.
- Update for some channel stuff.
- whitespace
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@268 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Clean up 24XX abort handling.
- Remove the response queue busy stuff and just have an in_intr flag to note
interrupt recursion.
- Add a lower level error flag.
- Clarifiy a comment; make a definition for the 'no task' RX_ID.
- Change severity of f/w timeout message
- Do the wait for mbox0 clearing for 2312 cards > revision 1.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@267 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Make sure we set/clear TDFL_ERROR
- Make sure we set SENSE VALID when we do a synthetic CTIO that has status.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@266 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Add unit attention injection. Fix some ridiculous Sense things.
Say why we couldn't pci register the driver.
Make isp_thread_event return an int if it fails to send the event. If it
fails to send the event, and this was for the 24XX card finding out the
initiator for a command, return the command with a BUSY status.
An N-port handle of zero is legal for a 24XX.
Add some more special N-Port handle definitions for 2K f/w.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@265 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Warn about bogus sense data in isp_target_start_ctio. Remove some redundant
zero initializations.
Make more common and more useful the debug printouts for the
various target dma mapping routines.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@264 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Start checking for a couple of things for the type of SAN we're connected to.
- Remove restriction against 2.6.23.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@263 d57e44dd-8a1f-0410-8b47-8ef2f437770f
As of version 4.0.25 the vpindex is available for MID f/w on the 24XX
for ASYNC_CHANGE_NOTIFY in outgoing mailbox 3.
Per QLogic release notes, the immediate notify entry for the 24XX has
various other items of interest in it based upon the ELS code.
Per QLogic release notes, after 4.0.25 f/w the WWPN comes with the
PLOGI/PDISC/ADISC and LOGO ELS codes in the immediate notify structure.
This makes initiator WWN maintenance *way* easier.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@262 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Hmm. Just in case INI_ANY and INI_NONE are not defined, define them here.
This is for the case of external software including isp_tpublic.h only.
Fix some misapplied flags.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@261 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Go for the gusto and merge multichan_development into the head branch. This
will break FreeBSD and NetBSD ports for a while (yawn) and solaris is dubious
anyway.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@260 d57e44dd-8a1f-0410-8b47-8ef2f437770f
-revert the part of 1.174 that stopped complaining about not finding
fast posting handles.
-pull REPORT LUNS (and LUN INVENTORY MAY HAVE CHANGE CA condition) from
multi-channel branch
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@256 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- clean up tpublic notes and change tmd_xfr_t to tmd_xact_t
- minor cleanups from mendocino
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@255 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Particularly:
- Added ability for target drivers to set result of command's status delvery to initiator (see scst_set_delivery_status())
- Added ability for user space devices set some mode page parameters to make SCST core behave correspondingly
- TM improvements
- Few possible crashes fixed
- Logging improvements
- Performance improvements
- Docs updates
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@227 d57e44dd-8a1f-0410-8b47-8ef2f437770f
+ The 24XX code in isp_target_start_ctio was setting the wrong values
to set SENSE LENGTH VALID for the FCP RSPNS IU.
+ Amusingly enough, this apparently didn't matter. In fact, once sense
data was being put into the ct7_entry_t there was *still* a problem
and REQUEST SENSE was being sent by the Linux initiator.
+ What *was* happening is that the 24XX requries the response data to
be 32 bit swapped. This is not obvious from the chip documents.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@215 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Pass to SCST port WWN as registration name.
- Avoid race condition when we receive new tmd and bp->scst_tmd
may (or not) be NULL.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@182 d57e44dd-8a1f-0410-8b47-8ef2f437770f
set it up. Otherwise we get irq number from legacy BIOS range and proper irq
(other number from PCI range) is not handled or handled by other driver -
- VERY VERY BAD THINGS happen then.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@178 d57e44dd-8a1f-0410-8b47-8ef2f437770f
time selectable. In run-time it is turned on only for 24xx chipsets. With
this workaround (hopply) we don't need to limit queue length (see comment
in patch).
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@177 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- pass FC transport error to SCST
- give SCST info about WWN of remote initiator
- info about expected transfer length and direction
- unifying printk error messages
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@145 d57e44dd-8a1f-0410-8b47-8ef2f437770f
This is SCST driver for ISP Qlogic chipsets commonly used in many SCSI and FC
host bus adapters. Supported chipset are listed in README file, incomplete
list of supported HBA's is in doc/Hardware.txt .
It is based on Matthew Jacob's multiplatform driver for ISP chipsets,
which can be download from ftp://ftp.feral.com/pub/isp/isp_dist.tgz
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@135 d57e44dd-8a1f-0410-8b47-8ef2f437770f
