- not acknowledge when fail to register
- unregistration when no one can call functions from HBA
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@324 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Make pre-1240 cards be able to do 64 bit dma as well, making sure that
they don't cross a 16MB boundary.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@316 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Make FC_SCRATCH_ACQUIRE a macro that returns true/false
- Fixes from Stanislaw for 2.6.23 & 2.6.24. Many thanks.
- A quick hack to isp_kthread to use waitqueues instead of semaphores
to have less blockage. More rewrites later
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@314 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- whitespace and other minor fixes
- Remove F/W crash dump support. We only worked it out for 2200 and 2300
cards. It's also true that QLogic would not support us even if we *did*
give them a crash dump, so the usage here is not really worth it.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@311 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Allow different platforms/environments to specificy the size of the
high and low private storage for tmd_cmd_t structures
- Add a scan scsi thread event so that we can attach devices as we
discover them
- Fix some tabs
- Make things work correctly when CONFIG_FW_LOADER is *not* defined
- Get rid of sema and use wait_interruptible
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@307 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- pass commands to SCST after assigning initiator to them
- enable lun's on proper channel
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@302 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Clean up MSI-X implementation and make sure we snag at least *3* vectors
so that the ATIO-Q vector is snagged.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@284 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Add a missing MSI disable and provide for pre-2.6.8 kernels.
- Fix bugs- forgot to actually compile (shame on me).
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@283 d57e44dd-8a1f-0410-8b47-8ef2f437770f
I don't know why I thought this would work- forcing a re-login to the fabric
controller just barfs.
Make down count reflect jiffies elapsed rather than depend on calls to
ISP_FC_RESCAN.
Shorten deadloop time default to 10 seconds.
At least enable MSI (if not MSI-X) for 24XX cards.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@282 d57e44dd-8a1f-0410-8b47-8ef2f437770f
We can (somehow) get commands on an atio7 for which we've never had a PLOGI/PRLI.
How this happens, I don't know. Anyway, we stick a tentative entry in the PDB
and call the task thread to find the rest of the info. This includes, badly and
stupidly, searching for the N-port handle by asking the chip. Sometimes it's not
there. In that case, we terminate the command.
In restarting commands that arrive while we start up, have the watchdog
time call isp_task_thread- this gives us a bit of hysteresis.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@281 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Need to include linux/vmalloc.h. Showed up on PPC port.
- Fix complaints about using an uninitialized pointer.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@280 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Make 2100/2200 and 2300 cards also maintain a target mode port database.
For the 24XX, we have to find the IID, N-port handle and channel when we
get an ATIO7. For the other cards, we already have the channel and N-port
handle and Port IID of the initiator, but have to find the S_ID.
Do the isp_find_pdb_by_{sid,loopid} functions search backwards to minimize
search time.
Don't load fw images more than once per device type!
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@279 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Allow ISP_FC_GETDINFO callers to get target mode entries.
- Remove stray '`' from define and PPC is now working again.
- Fix a typo which had us loading 2322 f/w into a 2300. Oops.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@278 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Put RISC_CODE define in the firmware files.
Use the Linux 2.6 firmware loader support if available. This saves
close to 700K of useless code getting loaded otherwise.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@277 d57e44dd-8a1f-0410-8b47-8ef2f437770f
If we're in role=NONE, then make sure that isp_init code sets state to
INITSTATE anyway.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@275 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Note that asking for "prefer N-port and then Loop" with the 24XX seems to
cause the f/w to crash. So, don't do that.
Firmware crashes are now considered fatal and cause the HBA to be marked dead.
Now that we've avoided the f/w crash in isp_init_24xx, we can process
toplogy options.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@274 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Add some code to do special IOCBs (that can just be ignored if they show
up as status IOCBs)- this is for some performance testing infrastructure.
Add some performance testing stuff.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@273 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Don't use both WWNs in the ICB block unless they're not NAA==2. This makes us
more consistent with QLogic driver setups and thus more likely to fit into the
same zoning setups.
If we're getting a PDB and it's for the Fabric Controller, force a login
to it (just in case it logged out underneath us). Return 'not logged in'
for the 24XX in case the 24XX specific login state isn't in the range of
PLOGI_DONE to LOGGED IN.
Don't do local loop scans if we have more than one channel (NP-IV) and we're
in a FL-port topology- we just end up poking ourselves usually.
Make sure we set loopstate in a couple of places we missed so that we
try and get it again.
Add in the RESET DEVICE and ABORT COMMAND functions for the 24XX cards
(finally).
Fix a longstanding bug where were passing the wrong (off by one) output
pointer to isp_handle_other_response.
Change isp_async...ISPASYNC_CHANGE_NOTIFY to have N-port handle, nlstate and
reason included as we get these for free with PDB Changed stuff for the
24XX card. Eventually we should be able to edit single local PDB entry
states instead of doing a full eval.
Put in the put of a 24XX Task Management Function IOCB. There is no get because
the firmware doesn't return it when done- instead a status iocb is done.
There is no "FAST POST" flag for the 24XX- this is a NOACK flag which means
that there is no interrupt if all goes well.
Fix spelling mistakes.
In isp_add_wwn_entry, ahem, don't allocate PDB entries out of the 'rexerved
for chip' area.
Put more comments in as to why we're terminating an exchange (and make them
all ISP_LOGTINFO).
Add, finally, the correct handling for a QIN_NOTIFY_ACK for a task management
function- this means we construct a ct7_entry_t to get the firmware to send
an FC Response IU for it. So, finally LUN RESETS and TARGET RESETS and
ABORT TASK will actually work and, more importantly, be seen to be working
by initiators.
Fix WWN defaults/active generation and retrieval. It was broken.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@272 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Fix a comment typo. Force on HARD ADDRESS for the 24XX.
Fix retry on error case- most of the time we *don't* want to retry a command
sent back with TDFL_ERROR set- instead we want to set PARITY ERROR as a
CA condition and just FIN the cmd.
Comment for r270:
1. A major botch for local loop handling - we were never getting past loopid zero
in isp_scan_loop. Bad doggie!
2. *Do* scan our loopid- this seems to allow us to find entities which are there
and have a N-port handle that is identical to ours. I have no idea how the QLogic
sorts this out. At least, this is how it seems to work for the 24XX in local loop
mode.
Don't deadlock with the HBA lock when performing a rescan ioctl. Also,
mark the loop state as if we'd just received a PDB event- that way
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@271 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Fix a comment typo. Force on HARD ADDRESS for the 24XX.
Fix retry on error case- most of the time we *don't* want to retry a command
sent back with TDFL_ERROR set- instead we want to set PARITY ERROR as a
CA condition and just FIN the cmd.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@270 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Add ASYNC_RCV_ERR
- Allow LIP to have a (possible) channel.
- Update for some channel stuff.
- whitespace
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@268 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Clean up 24XX abort handling.
- Remove the response queue busy stuff and just have an in_intr flag to note
interrupt recursion.
- Add a lower level error flag.
- Clarifiy a comment; make a definition for the 'no task' RX_ID.
- Change severity of f/w timeout message
- Do the wait for mbox0 clearing for 2312 cards > revision 1.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@267 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Make sure we set/clear TDFL_ERROR
- Make sure we set SENSE VALID when we do a synthetic CTIO that has status.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@266 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Add unit attention injection. Fix some ridiculous Sense things.
Say why we couldn't pci register the driver.
Make isp_thread_event return an int if it fails to send the event. If it
fails to send the event, and this was for the 24XX card finding out the
initiator for a command, return the command with a BUSY status.
An N-port handle of zero is legal for a 24XX.
Add some more special N-Port handle definitions for 2K f/w.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@265 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Warn about bogus sense data in isp_target_start_ctio. Remove some redundant
zero initializations.
Make more common and more useful the debug printouts for the
various target dma mapping routines.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@264 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Start checking for a couple of things for the type of SAN we're connected to.
- Remove restriction against 2.6.23.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@263 d57e44dd-8a1f-0410-8b47-8ef2f437770f
As of version 4.0.25 the vpindex is available for MID f/w on the 24XX
for ASYNC_CHANGE_NOTIFY in outgoing mailbox 3.
Per QLogic release notes, the immediate notify entry for the 24XX has
various other items of interest in it based upon the ELS code.
Per QLogic release notes, after 4.0.25 f/w the WWPN comes with the
PLOGI/PDISC/ADISC and LOGO ELS codes in the immediate notify structure.
This makes initiator WWN maintenance *way* easier.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@262 d57e44dd-8a1f-0410-8b47-8ef2f437770f
