- SendTargets now returns all (allowed) portals. Particularly based on IET r230, 234, 249 and 264.
- Initiators assigned to security groups without LUNs will not see the target during discovery and forbidden to login to it
- Per portals access control added
- Negative sign added to wildcard matching
- Docs updated
- Cleanups and minor fixes
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@1685 d57e44dd-8a1f-0410-8b47-8ef2f437770f
iSCSI-SCST: A huge improvements in errors recovery and iSCSI RFC complaince as well as performance. Also:
- Fixes and improvements for MaxOutstandingR2T>1
- Flow control tracing added.
- Cleanups
SCST core:
- Now for scst_cmd_init_stage1_done() commands preprocessing_done() is always called before xmit_response(), even in case of abort or error.
- Fixed recently introduced bug, which can lead to sending responses for aborted commands after reply on the corresponding TM command already sent.
- Flow control tracing added.
- Now it is possible to call functions setting commands execution status (e.g., scst_set_cmd_error_status()) several times for the same command. Only the first call will be completed, other calls - ignored.
- All commands are counted and shown in proc/sysfs now. Before only active, i.e. not yet executed commands, were counted and shown there.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@1431 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The sysfs intarface is mostly finished. Only initiators-oriented access control not implemented and not all target drivers are updated. Only qla2x00t has been fully updated.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@1229 d57e44dd-8a1f-0410-8b47-8ef2f437770f
checkpatch issues reported by the checkpatch script included with the 2.6.29
kernel and that were not yet reported by the 2.6.28 checkpatch script
(trailing statements should be on the next line / struct should normally be
const).
The patch below has been tested as follows:
- Reran scripts/run-regression-tests -k 2.6.24.7 -k 2.6.25.20 -k 2.6.26.8 -k 2.6.27.21 -k 2.6.28.9 -k 2.6.29 and verified the output.
- Rebuilt, installed and loaded scst, iscsi-scst and srpt as follows:
make -s clean && make -s -C scst install && make -s -C iscsi-scst install && make -s -C srpt install && cd scstadmin && make -s && make -s install && modprobe scst_vdisk && modprobe iscsi-scst && dmesg
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
with minor cleanups and corrections in put_page_callback-2.6.29.patch
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@717 d57e44dd-8a1f-0410-8b47-8ef2f437770f
* use tabs not spaces
* Macros with complex values should be enclosed in parenthesis.
* printk() should include KERN_ facility level.
The patch below has been verified by reviewing it carefully and by verifying the output of the following command: scripts/run-regression-tests -k 2.6.28.8
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@707 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- Now sense data are sent without additional memory allocation and copy
- Sending and receiving padding bytes reimplemented
- Cleanups
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@699 d57e44dd-8a1f-0410-8b47-8ef2f437770f
code, mainly about lines that exceeded 80 columns. As you can see in the patch
below most lines that were too long have been split, but some code has also
been moved into helper functions in order to keep the code readable. No
functionality has been changed.
This patch has been verified as follows:
- Reread the patch carefully.
- Verified that the iSCSI target kernel module still loads.
- Verified the output generated by scripts/run-regression-tests -k 2.6.27.5.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
with some modifications
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@569 d57e44dd-8a1f-0410-8b47-8ef2f437770f
warning: incorrect type in argument 2 (different address spaces)
expected void const [noderef] <asn:1>*from
got void *<noident>
One more optional fix (that i didn't do) is instead of casting
arg in the ioctl() function before every call to function
is to do the casting only once to a temporary variable and
send this variable to every function.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@461 d57e44dd-8a1f-0410-8b47-8ef2f437770f
an external module. When applying the SCST kernel patch to the mainstream
kernel tree with debugging and/or tracing enabled however, the resulting code
triggers a compiler error. This is because the symbols DEBUG and TRACING
conflict with symbols with the same named defined in unrelated kernel headers.
The patch below resolves these conflicts by renaming the following preprocessor
symbols:
- DEBUG into CONFIG_SCST_DEBUG.
- DEBUG_DIGEST_FAILURES into CONFIG_SCST_ISCSI_DEBUG_DIGEST_FAILURES.
- DEBUG_OOM into CONFIG_SCST_DEBUG_OOM.
- DEBUG_RETRY into CONFIG_SCST_DEBUG_RETRY.
- DEBUG_SN into CONFIG_SCST_DEBUG_SN.
- DEBUG_TM into CONFIG_SCST_DEBUG_TM.
- EXTRACHECKS into CONFIG_SCST_EXTRACHECKS.
- SCST_HIGHMEM into CONFIG_SCST_HIGHMEM.
- STRICT_SERIALIZING into CONFIG_SCST_STRICT_SERIALIZING.
- TM_DBG_GO_OFFLINE into CONFIG_SCST_TM_DBG_GO_OFFLINE. Mapped 0/1 values
into macro undefined / macro defined.
- TRACING into CONFIG_SCST_TRACING.
- USE_EXPECTED_VALUES into CONFIG_SCST_USE_EXPECTED_VALUES.
- In qla_isp/linux/isp_scst.c, renamed DEBUG into DEBUG_ISP_SCST.
- In qla_isp/..., renamed SCSI_TARGET in SCST_SCSI_TARGET.
- In qla_isp/..., renamed SCSI_TARGET_DEV in SCST_SCSI_TARGET_DEV.
Additionally, all CONFIG_SCSI_TARGET* macro's are renamed into CONFIG_SCST* in
order to avoid confusion between the STGT CONFIG-symbols and the SCST CONFIG-
symbols.
The following additional options are now configurable through Kconfig:
- CONFIG_SCST_ISCSI_DEBUG_DIGEST_FAILURES
- CONFIG_SCST_STRICT_SERIALIZING
- CONFIG_SCST_STRICT_SECURITY
- CONFIG_SCST_ALLOW_PASSTHROUGH_IO_SUBMIT_IN_SIRQ
- CONFIG_SCST_ABORT_CONSIDER_FINISHED_TASKS_AS_NOT_EXISTING
- CONFIG_SCST_USE_EXPECTED_VALUES
- CONFIG_SCST_DEBUG_OOM
- CONFIG_SCST_DEBUG_RETRY
- CONFIG_SCST_DEBUG_SN
- CONFIG_SCST_DEBUG_TM
- CONFIG_SCST_TM_DBG_GO_OFFLINE
The patch below has been verified as follows:
- Verified that the following command does not print any new warning messages:
make -s clean && make -C srpt -s clean && make -s scst iscsi-scst && make -C srpt -s
- Verified as follows that the internal SCST patches still apply cleanly:
for p in *patch; do patch -p0 --dry-run -f -s <$p; done
- Checked that the patch generated by generate-kernel-patch still applies
cleanly to the 2.6.25.7 kernel, and that the patched kernel tree still
compiles, installs and boots fine, that the iscsi-scst, ib_srpt,
scst_disk and scst_vdisk modules still load, and that iSCSI communication
still works fine. All SCST kernel configuration options that could be
enabled have been enabled during this test.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@453 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The patch below fixes all remaining checkpatch errors:
- ERROR: do not use assignment in if condition
- ERROR: that open brace { should be on the previous line
- ERROR: trailing whitespace
- ERROR: use tabs not spaces
The last three had already been fixed before, but some occurences were
reintroduced in r403. It would be great if new modifications could be checked
for checkpatch errors before being committed.
This patch has been tested as follows:
- Reread the patch below carefully.
- Verified that make -s clean && make -s iscsi scst && make -s -C srpt
still works and does not trigger any compiler warnings.
- Verified that checkpatch does no longer report any errors.
- Checked that the patch generated by generate-kernel-patch still applies
cleanly to the 2.6.25.4 kernel, and that the patched kernel tree still
compiles, installs and boots fine, and that the iscsi-scst, ib_srpt,
scst_disk and scst_vdisk modules still load.
- Tested that iSCSI login/logout still works from a remote system, and that
iSCSI I/O still works.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@404 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- PRIO queue was removed from scst_user. Instead, all priority commands now queued in the head of the regular queue. The corresponding code was removed from fileio_tgt as well. It necessary, in the future the priority queue can be easily restored from this patch.
- pre_unreg_sess() was removed from struct scst_dev_type. The corresponding code was removed from SCST core as well
- Almost all /proc/scsi_tgt commands now can fail after timeout (90 seconds) with EBUSY
- Fixed possible incorrect command's retry if double RESET UA is detected.
- Many minor changes and cleanups
Also docs were updated.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@403 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The patch below fixes the following categories of checkpatch complaints:
- ERROR: switch and case should be at the same indent
- ERROR: do not initialise statics to 0 or NULL
- ERROR: use tabs not spaces
I have verified that the SCST source code still compiles.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@398 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- From the main Makefile all all LSI/MPT related targets are commented out, because the recent changes in its Makefile have broken them.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@391 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The patch below fixes the following class of checkpatch.pl errors:
ERROR("(foo*)" should be "(foo *)".
Or: another whitespace-only change.
I have verified that the output of svn diff -w -x is empty for this patch.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@383 d57e44dd-8a1f-0410-8b47-8ef2f437770f
One of the Linux kernel patch submission requirements is that source files do
not contain trailing whitespace. The patch below removes trailing whitespace
from .c and .h source files.
Note: it might be more convenient to run the script I used to generate this
patch than to review and apply the patch below. This is how I generated and
verified the patch below:
cat <<EOF >./strip-trailing-whitespace
#!/bin/bash
trap "rm -f $t" EXIT
t=/tmp/temporary-file.$$
for f in "$@"
do
sed 's/[ ]*$//' <"$f" >"$t" && mv "$t" "$f"
done
EOF
chmod a+x ./strip-trailing-whitespace
find -name '*.[ch]' | xargs ./strip-trailing-whitespace
svn diff -x -w
Signed-off-by: <bart.vanassche@gmail.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@377 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- "RECEIVE DIAGNOSTIC RESULTS" command handling fixed
- Obtaining device queue parameters in scst_obtain_device_parameters() changed to handle NOT READY sense
- Fixed possible dev_cmd_count underflow
- Minor iSCSI-SCST connection closing cleanups and fixes
- Semantic of other *_atomic flags changed a bit. Now they are intended only to allow SCST to optimize execution context. The corresponing functions now can *always* be called on atomic context and, if necessary, should manually determine that using scst_cmd_atomic() function and restart using corresponding *_NEED_THREAD_* return value.
- scst_cmd_get_tgt_resp_flags() and SCST_TSC_FLAG_STATUS flag made obsolete and replaced by scst_cmd_get_is_send_status(). All in-tree drivers updated accordingly
- Cleanup: preprocessing_done_atomic removed, now preprocessing_done() callback always called on thread context
- 64-bit cleanups
- Documented that iscsi-scst-adm is currently broken and explained why
- In user space Makefile's added possibility to specify external linker flags
- Minor performance optimizations
- Other minor cleanups
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@350 d57e44dd-8a1f-0410-8b47-8ef2f437770f
- ABORT_CONSIDER_FINISHED_TASKS_AS_NOT_EXISTING compilation symbol added
- TM fixes and cleanups
- Fixes crash on modprobe with some real devices
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@233 d57e44dd-8a1f-0410-8b47-8ef2f437770f
