mirrors/scst
1
0
Fork 0
mirror of https://github.com/SCST-project/scst.git synced 2026-05-14 01:01:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
master
scst/iscsi-scst/README
Gleb Chesnokov b2a1f6e66a Bump the version number to 3.11.0-pre 
These changes have been generated by running the following command:

$ scripts/update-version 3 11 0 -pre
2025-12-29 13:06:44 +03:00

934 lines
36 KiB
Plaintext
Raw Permalink Blame History

iSCSI SCST target driver
========================
Version 3.11.0-pre, 29 December 2025
----------------------------
ISCSI-SCST is a deeply reworked fork of iSCSI Enterprise Target (IET)
(http://iscsitarget.sourceforge.net). Reasons of the fork were:
- To be able to use full power of SCST core.
- To fix all the problems, corner cases issues and iSCSI standard
violations which IET has.
See for more info http://iscsi-scst.sourceforge.net.
This version is compatible with SCST version 2.0.0 and higher.
Installation if your Linux kernel already has iSCSI-SCST built-in
-----------------------------------------------------------------
Simply run "make all", then "make install".
Installation out of Linux kernel tree
-------------------------------------
See HOWTOs in the doc/ subdirectory.
Only vanilla kernels from kernel.org and RHEL/CentOS 5.2 kernels are
supported, but it should work on other (vendors') kernels, if you manage
to successfully compile on them. The main problem with vendor's kernels
is that they often contain patches, which appear only in the next
version of the vanilla kernel, therefore it's quite hard to track such
changes. Thus, if during compilation for some vendor's kernel your
compiler complains about redefinition of some symbol, you should either
switch to vanilla kernel, or add or change as necessary the
corresponding to that symbol "#if LINUX_VERSION_CODE" statement.
Kernel versions 2.6.26 and higher are supported.
If during compilation you see message like "*** No rule to make target
`xxx.h', needed by `yyy.o'. Stop.", then your autogenerated
dependencies don't match your compiler configuration anymore. You should
run "make extraclean" to remove them. On the next compilation they will
be regenerated.
If you experience problems during kernel module load or running, check
your system and/or kernel logs (or run dmesg command for the few most
recent kernel messages).
To use full power of TCP zero-copy transmit functions, especially
dealing with user space supplied via scst_user module memory, iSCSI-SCST
needs to be notified when Linux networking finished data transmission.
For that you should enable CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION
kernel config option. This is highly recommended, but not required.
Basically, iSCSI-SCST works fine with an unpatched Linux kernel with the
same or better speed as other open source iSCSI targets, including IET,
but if you want even better performance you have to patch and rebuild
the kernel. Without CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION
enabled you will just revert to the original behavior of other open
source iSCSI targets, when for data transmission:
- For in-kernel allocated memory (scst_vdisk and pass-through
handlers) usage of SGV cache on transmit path (READ-type commands)
will be disabled, but data will still be sent in zero-copy manner.
- For user space allocated memory (scst_user handler) all transmitted
data will be additionally copied into temporary TCP buffers. The
performance hit will be quite noticeable.
Usage
-----
See HOWTOs in the doc/ subdirectory.
If you want to use Intel CRC32 offload and have corresponding hardware,
you should load crc32c-intel module. Then iSCSI-SCST will do all digest
calculations using this facility.
In 2.0.0 usage of iscsi-scstd.conf as well as iscsi-scst-adm utility is
obsolete. Use the sysfs interface facilities instead.
The flow of iSCSI-SCST inialization should be as the following:
1. Load of SCST and iSCSI-SCST kernel modules with necessary module
parameters, if needed.
2. Start iSCSI-SCST service.
3. Configure targets, devices, LUNs, etc. either using scstadmin
(recommended), or using the sysfs interface directly as described below.
It is recommended to use TEST UNIT READY ("tur") command to check if
iSCSI-SCST target is alive in MPIO configurations.
Also see SCST README file how to tune for the best performance.
CAUTION: Working of target and initiator on the same host isn't fully
======= supported. See SCST README file for details.
Migration from the obsolete proc interface
------------------------------------------
Sysfs enabled scstadmin supports old procfs config file format, so with
it you should do the following steps to migrate your proc-based
configuration to the sysfs interface:
1. Load SCST modules
2. Run "scstadmin -config old_config_file"
3. Start iSCSI-SCST
4. Run "scstadmin -write_config new_config_file"
5. Check new_config_file and make sure it has everything written
properly.
6. IMPORTANT! Delete /etc/iscsi-scst.conf and forget about it.
7. Start using "scstadmin -config new_config_file" to configure both
SCST and iSCSI-SCST.
IMPORTANT: With the sysfs interface the flow of iSCSI-SCST initialization
========= has changed (see above). Now scstadmin should be run as the FINAL
step of the initialization and only ONCE.
Also it is recommended to convert initiators.allow and initiators.deny
files to the corresponding sysfs facilities.
Migration from IET
------------------
Scalable Informatics Inc. has developed a pretty simple tool, will
automatically generate an /etc/scst.conf file from an /etc/ietd.conf
file, and then restart daemons.
Tool is here: http://download.scalableinformatics.com/gen_scst_conf/
Just run it on an ietd.conf based iSCSI target:
$ chmod +x gen_scst_conf.pl
$ sudo ./gen_scst_conf.pl
and your IET machine should now largely be an iSCSI-SCST machine. With
the caveat of a few IET elements not being supported.
Current limitations are one LUN per target, and not all LUN options
might be mapped well between the systems. This may change if there is
demand. For any questions and inquirys feel free to contact Joe Landman
<landman@scalableinformatics.com> (and please provide a few sample
ietd.conf files for us to play with).
Sysfs interface
---------------
The sysfs build supports only kernels 2.6.26 and higher, because in
2.6.26 internal kernel's sysfs interface had a major change, which made
it heavily incompatible with pre-2.6.26 version.
Root of SCST sysfs interface is /sys/kernel/scst_tgt. Root of iSCSI-SCST
is /sys/kernel/scst_tgt/targets/iscsi. It has the following entries:
- None, one or more subdirectories for targets with name equal to names
of the corresponding targets.
- IncomingUser[num] - optional one or more attributes containing user
name and password for incoming discovery user name. Not exist by
default and can be added through "mgmt" entry, see below.
- OutgoingUser - optional attribute containing user name and password
for outgoing discovery user name. Not exist by default and can be
added through "mgmt" entry, see below.
- iSNSServer - contains name or IP address of iSNS server with optional
"AccessControl" attribute, which allows to enable iSNS access
control. Empty by default.
- allowed_portal[num] - optional attribute, which specifies, on which
portals (target's IP addresses) this target will be available. If not
specified (default) the target will be available on all portals.
As soon as at least one allowed_portal specified, the target will be
accessible for initiators only on the specified portals. There might
be any number of the allowed_portal attributes. The portals
specification in the allowed_portal attributes can be a simple
DOS-type patterns, containing '*' and '?' symbols. '*' means match
all any symbols, '?' means match only any single symbol. For
instance, "10.170.77.2" will match "10.170.7?.*". Additionally, you
can use negative sign '!' to revert the value of the pattern. For
instance, "10.170.67.2" will match "!10.170.7?.*". See examples
below.
- enabled - using this attribute you can enable or disable iSCSI-SCST
accept new connections. It allows to finish configuring global
iSCSI-SCST attributes before it starts accepting new connections. 0
by default.
- internal_portal - May designate one or more existing portals as being
internal. This will eliminate the need to supply a CHAP user/secret
during discovery or target login to any targets configured on those
portals. This is particularly useful for internal targets used as
part of ALUA configuration. Multiple addresses may be supplied,
separated by space characters. Empty by default.
- link_local - if set, makes the response to an IPv6 SendTargets include
any link local addresses. Default is set.
- open_state - read-only attribute, which allows to see if the user
space part of iSCSI-SCST connected to the kernel part.
- per_portal_acl - if set, makes iSCSI-SCST work in the per-portal
access control mode. In this mode iSCSI-SCST registers all initiators
in SCST core as "initiator_name#portal_IP_address" pattern, like
"iqn.2006-10.net.vlnb:ini#10.170.77.2" for initiator
iqn.2006-10.net.vlnb connected through portal 10.170.77.2. This mode
allows to make particular initiators be able to use only particular
portals on the target and don't see/be able to connect through
others. See below for more details.
- trace_level - allows to enable and disable various tracing
facilities. See content of this file for help how to use it.
- version - read-only attribute, which allows to see version of
iSCSI-SCST and enabled optional features.
- mgmt - main management entry, which allows to configure iSCSI-SCST.
Namely, add/delete targets as well as add/delete optional global and
per-target attributes. See content of this file for help how to use
it.
Each iSCSI-SCST sysfs file (attribute) can contain in the last line mark
"[key]". It is automatically added mark used to allow scstadmin to see
which attributes it should save in the config file. You can ignore it.
Each target subdirectory contains the following entries:
- ini_groups - subdirectory defining initiator groups for this target,
used to define per-initiator access control. See SCST core README for
more details.
- luns - subdirectory defining LUNs of this target. See SCST core
README for more details.
- sessions - subdirectory containing connected to this target sessions.
- IncomingUser[num] - optional one or more attributes containing user
name and password for incoming user name. Not exist by default and can
be added through the "mgmt" entry, see above.
- OutgoingUser - optional attribute containing user name and password
for outgoing user name. Not exist by default and can be added through
the "mgmt" entry, see above.
- Entries defining default iSCSI parameters values used during iSCSI
parameters negotiation. Only entries which can be changed or make
sense are listed there.
- QueuedCommands - defines maximum number of commands queued to any
session of this target. Default is 32 commands.
- NopInInterval - defines interval between NOP-In requests, which the
target will send on idle connections to check if the initiator is
still alive. If there is no NOP-Out reply from the initiator in
NopInTimeout seconds, the corresponding connection will be closed. Default
is 30 seconds. If it's set to 0, then NOP-In requests are disabled.
- NopInTimeout - defines the maximum time in seconds a NOP-In request
can wait for response from initiator, otherwise the corresponding
connection will be closed. Default is 30 seconds.
- RspTimeout - defines the maximum time in seconds a command can wait for
response from initiator, otherwise the corresponding connection will
be closed. Default is 90 seconds.
- enabled - using this attribute you can enable or disable iSCSI-SCST
accept new connections to this target. It allows to finish
configuring it before it starts accepting new connections. 0 by
default.
- redirect - allows to temporarily or permanently redirect login to the
target to another portal. Discovery sessions will not be impacted,
but normal sessions will be redirected before security negotiation.
The destination should be specified using format "<ip_addr>[:port] temp|perm".
IPv6 addresses need to be enclosed in [] brackets. To remove
redirection, provide an empty string. For example:
echo "10.170.77.2:32600 temp" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/redirect
will temporarily redirect login to portal 10.170.77.2 and port 32600.
- tid - TID of this target.
- alias - TargetAlias of this target. If not set, it will default to the
empty string and no TargetAlias will be reported in LOGIN RESPONSE or iSNS
for this target.
The "sessions" subdirectory contains the following attribute:
- thread_pid - the process identifiers (PIDs) of the iscsird and iscsiwr
threads that process SCSI commands associated with this session.
Additionally, the "sessions" subdirectory contains one subdirectory for each
connected session with name equal to name of the connected initiator.
Each session subdirectory contains the following entries:
- One subdirectory for each TCP connection in this session. ISCSI-SCST
supports 1 connection per session, but the session subdirectory can
contain several connections: one active and other being closed.
- Entries defining negotiated iSCSI parameters. Only parameters which
can be changed or make sense are listed there.
- initiator_name - contains initiator name
- sid - contains SID of this session
- reinstating - contains reinstatement state of this session
- force_close - write-only attribute, which allows to force close this
session. This is the only writable session attribute.
- active_commands - contains number of active, i.e. not yet or being
executed, SCSI commands in this session.
- commands - contains overall number of SCSI commands in this session.
- thread_pid - Process IDs (PIDs) of the iscsi{wr,rd} kernel threads that
process the SCSI commands for this session.
Each connection subdirectory contains the following entries:
- cid - contains CID of this connection.
- ip - contains IP address of the connected initiator.
- state - contains processing state of this connection.
Each initiator group subdirectory contains:
- per_sess_dedicated_tgt_threads - if set, each iSCSI session has
dedicated, i.e. not shared with other sessions, pool of the
iscsi{wr,rd} kernel threads. Useful to control per-session CPU
affinity to improve performance. Default: not set.
See SCST README for info about other attributes.
Below is a sample script, which configures 1 virtual disk "disk1" using
/disk1 image and one target iqn.2006-10.net.vlnb:tgt with all default
parameters:
#!/bin/bash
modprobe scst
modprobe scst_vdisk
echo "add_device disk1 filename=/disk1; nv_cache=1" >/sys/kernel/scst_tgt/handlers/vdisk_fileio/mgmt
service iscsi-scst start
echo "add_target iqn.2006-10.net.vlnb:tgt" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add disk1 0" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/mgmt
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/enabled
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/enabled
Below is another sample script, which configures 1 real local SCSI disk
0:0:1:0 and one target iqn.2006-10.net.vlnb:tgt with all default parameters:
#!/bin/bash
modprobe scst
modprobe scst_disk
echo "add_device 0:0:1:0" >/sys/kernel/scst_tgt/handlers/dev_disk/mgmt
service iscsi-scst start
echo "add_target iqn.2006-10.net.vlnb:tgt" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add 0:0:1:0 0" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/mgmt
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/enabled
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/enabled
Below is an advanced sample script, which configures more virtual
devices of various types, including virtual CDROM and 2 targets, one
with all default parameters, another one with some not default
parameters, incoming and outgoing user names for CHAP authentication,
and special permissions for initiator iqn.2005-03.org.open-iscsi:cacdcd2520,
which will see another set of devices. Also this sample configures CHAP
authentication for discovery sessions and iSNS server with access
control.
#!/bin/bash
modprobe scst
modprobe scst_vdisk
echo "add_device disk1 filename=/disk1; nv_cache=1" >/sys/kernel/scst_tgt/handlers/vdisk_fileio/mgmt
echo "add_device disk2 filename=/disk2; blocksize=4096; nv_cache=1" >/sys/kernel/scst_tgt/handlers/vdisk_fileio/mgmt
echo "add_device blockio filename=/dev/sda5" >/sys/kernel/scst_tgt/handlers/vdisk_blockio/mgmt
echo "add_device nullio" >/sys/kernel/scst_tgt/handlers/vdisk_nullio/mgmt
echo "add_device cdrom" >/sys/kernel/scst_tgt/handlers/vcdrom/mgmt
service iscsi-scst start
echo "192.168.1.16 AccessControl" >/sys/kernel/scst_tgt/targets/iscsi/iSNSServer
echo "add_attribute IncomingUser joeD 12charsecret" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add_attribute OutgoingUser jackD 12charsecret1" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add_target iqn.2006-10.net.vlnb:tgt" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add disk1 0" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/mgmt
echo "add cdrom 1" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/mgmt
echo "add_target iqn.2006-10.net.vlnb:tgt1" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add_target_attribute iqn.2006-10.net.vlnb:tgt1 IncomingUser1 joe2 12charsecret2" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add_target_attribute iqn.2006-10.net.vlnb:tgt1 IncomingUser joe 12charsecret" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "add_target_attribute iqn.2006-10.net.vlnb:tgt1 OutgoingUser jim1 12charpasswd" >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo "No" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/InitialR2T
echo "Yes" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/ImmediateData
echo "8192" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/MaxRecvDataSegmentLength
echo "8192" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/MaxXmitDataSegmentLength
echo "131072" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/MaxBurstLength
echo "32768" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/FirstBurstLength
echo "1" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/MaxOutstandingR2T
echo "CRC32C,None" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/HeaderDigest
echo "CRC32C,None" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/DataDigest
echo "32" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/QueuedCommands
echo "add disk2 0" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/luns/mgmt
echo "add nullio 26" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/luns/mgmt
echo "create special_ini" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/ini_groups/mgmt
echo "add blockio 0 read_only=1" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/ini_groups/special_ini/luns/mgmt
echo "add iqn.2005-03.org.open-iscsi:cacdcd2520" >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/ini_groups/special_ini/initiators/mgmt
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/enabled
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt1/enabled
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/enabled
The resulting overall SCST sysfs hierarchy with an initiator connected to
both iSCSI-SCST targets will look like:
/sys/kernel/scst_tgt
|-- devices
| |-- blockio
| | |-- blocksize
| | |-- exported
| | | `-- export0 -> ../../../targets/iscsi/iqn.2006-10.net.vlnb:tgt1/ini_groups/special_ini/luns/0
| | |-- filename
| | |-- handler -> ../../handlers/vdisk_blockio
| | |-- nv_cache
| | |-- read_only
| | |-- removable
| | |-- resync_size
| | |-- size_mb
| | |-- t10_dev_id
| | |-- threads_num
| | |-- threads_pool_type
| | |-- type
| | `-- usn
| |-- cdrom
| | |-- exported
| | | `-- export0 -> ../../../targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/1
| | |-- filename
| | |-- handler -> ../../handlers/vcdrom
| | |-- size_mb
| | |-- t10_dev_id
| | |-- threads_num
| | |-- threads_pool_type
| | |-- type
| | `-- usn
| |-- disk1
| | |-- blocksize
| | |-- exported
| | | `-- export0 -> ../../../targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/0
| | |-- filename
| | |-- handler -> ../../handlers/vdisk_fileio
| | |-- nv_cache
| | |-- o_direct
| | |-- read_only
| | |-- removable
| | |-- resync_size
| | |-- size_mb
| | |-- t10_dev_id
| | |-- threads_num
| | |-- threads_pool_type
| | |-- type
| | |-- usn
| | `-- write_through
| |-- disk2
| | |-- blocksize
| | |-- exported
| | | `-- export0 -> ../../../targets/iscsi/iqn.2006-10.net.vlnb:tgt1/luns/0
| | |-- filename
| | |-- handler -> ../../handlers/vdisk_fileio
| | |-- nv_cache
| | |-- o_direct
| | |-- read_only
| | |-- removable
| | |-- resync_size
| | |-- size_mb
| | |-- t10_dev_id
| | |-- threads_num
| | |-- threads_pool_type
| | |-- type
| | |-- usn
| | `-- write_through
| `-- nullio
| |-- blocksize
| |-- exported
| | `-- export0 -> ../../../targets/iscsi/iqn.2006-10.net.vlnb:tgt1/luns/26
| |-- handler -> ../../handlers/vdisk_nullio
| |-- read_only
| |-- removable
| |-- size_mb
| |-- t10_dev_id
| |-- threads_num
| |-- threads_pool_type
| |-- type
| `-- usn
|-- handlers
| |-- vcdrom
| | |-- cdrom -> ../../devices/cdrom
| | |-- mgmt
| | |-- trace_level
| | `-- type
| |-- vdisk_blockio
| | |-- blockio -> ../../devices/blockio
| | |-- mgmt
| | |-- trace_level
| | `-- type
| |-- vdisk_fileio
| | |-- disk1 -> ../../devices/disk1
| | |-- disk2 -> ../../devices/disk2
| | |-- mgmt
| | |-- trace_level
| | `-- type
| `-- vdisk_nullio
| |-- mgmt
| |-- nullio -> ../../devices/nullio
| |-- trace_level
| `-- type
|-- sgv
| |-- global_stats
| |-- sgv
| | `-- stats
| |-- sgv-clust
| | `-- stats
| `-- sgv-dma
| `-- stats
|-- targets
| `-- iscsi
| |-- IncomingUser
| |-- OutgoingUser
| |-- enabled
| |-- internal_portal
| |-- iSNSServer
| |-- iqn.2006-10.net.vlnb:tgt
| | |-- DataDigest
| | |-- FirstBurstLength
| | |-- HeaderDigest
| | |-- ImmediateData
| | |-- InitialR2T
| | |-- MaxBurstLength
| | |-- MaxOutstandingR2T
| | |-- MaxRecvDataSegmentLength
| | |-- MaxXmitDataSegmentLength
| | |-- NopInInterval
| | |-- QueuedCommands
| | |-- RspTimeout
| | |-- alias
| | |-- enabled
| | |-- ini_groups
| | | `-- mgmt
| | |-- luns
| | | |-- 0
| | | | |-- device -> ../../../../../devices/disk1
| | | | `-- read_only
| | | |-- 1
| | | | |-- device -> ../../../../../devices/cdrom
| | | | `-- read_only
| | | `-- mgmt
| | |-- per_portal_acl
| | |-- redirect
| | |-- rel_tgt_id
| | |-- sessions
| | | `-- iqn.2005-03.org.open-iscsi:cacdcd2520
| | | |-- 10.170.75.2
| | | | |-- cid
| | | | |-- ip
| | | | `-- state
| | | |-- DataDigest
| | | |-- FirstBurstLength
| | | |-- HeaderDigest
| | | |-- ImmediateData
| | | |-- InitialR2T
| | | |-- MaxBurstLength
| | | |-- MaxOutstandingR2T
| | | |-- MaxRecvDataSegmentLength
| | | |-- MaxXmitDataSegmentLength
| | | |-- active_commands
| | | |-- commands
| | | |-- force_close
| | | |-- initiator_name
| | | |-- luns -> ../../luns
| | | |-- reinstating
| | | `-- sid
| | `-- tid
| |-- iqn.2006-10.net.vlnb:tgt1
| | |-- DataDigest
| | |-- FirstBurstLength
| | |-- HeaderDigest
| | |-- ImmediateData
| | |-- IncomingUser
| | |-- IncomingUser1
| | |-- InitialR2T
| | |-- MaxBurstLength
| | |-- MaxOutstandingR2T
| | |-- MaxRecvDataSegmentLength
| | |-- MaxXmitDataSegmentLength
| | |-- OutgoingUser
| | |-- NopInInterval
| | |-- QueuedCommands
| | |-- RspTimeout
| | |-- enabled
| | |-- ini_groups
| | | |-- mgmt
| | | `-- special_ini
| | | |-- initiators
| | | | |-- iqn.2005-03.org.open-iscsi:cacdcd2520
| | | | `-- mgmt
| | | `-- luns
| | | |-- 0
| | | | |-- device -> ../../../../../../../devices/blockio
| | | | `-- read_only
| | | `-- mgmt
| | |-- luns
| | | |-- 0
| | | | |-- device -> ../../../../../devices/disk2
| | | | `-- read_only
| | | |-- 26
| | | | |-- device -> ../../../../../devices/nullio
| | | | `-- read_only
| | | `-- mgmt
| | |-- per_portal_acl
| | |-- redirect
| | |-- rel_tgt_id
| | |-- sessions
| | | `-- iqn.2005-03.org.open-iscsi:cacdcd2520
| | | |-- 10.170.75.2
| | | | |-- cid
| | | | |-- ip
| | | | `-- state
| | | |-- DataDigest
| | | |-- FirstBurstLength
| | | |-- HeaderDigest
| | | |-- ImmediateData
| | | |-- InitialR2T
| | | |-- MaxBurstLength
| | | |-- MaxOutstandingR2T
| | | |-- MaxRecvDataSegmentLength
| | | |-- MaxXmitDataSegmentLength
| | | |-- active_commands
| | | |-- commands
| | | |-- force_close
| | | |-- initiator_name
| | | |-- luns -> ../../ini_groups/special_ini/luns
| | | |-- reinstating
| | | `-- sid
| | `-- tid
| |-- link_local
| |-- mgmt
| |-- open_state
| |-- trace_level
| `-- version
|-- threads
|-- trace_level
`-- version
Configuring iscsi-scst via scstadmin
------------------------------------
All iscsi-scst parameters that were configured in the previous section via the
sysfs interface can also be set via scstadmin. Here is an example that shows
how to configure the IP address of the iSNSServer and to enable iSNS access
control at the same time:
# scstadmin -noprompt -set_drv_attr iscsi -attributes iSNSServer="192.168.1.16 AccessControl"
Collecting current configuration: done.
-> Making requested changes.
-> Done, 0 change(s) made.
All done.
# scstadmin -list_drv_attr iscsi
Collecting current configuration: done.
Attribute Value Writable KEY
------------------------------------------------------------
iSNSServer 127.0.0.1 AccessControl Yes Yes
Dynamic attributes available
----------------------------
OutgoingUser
IncomingUser
All done.
Advanced initiators access control
----------------------------------
ISCSI-SCST allows you to optionally control visibility and accessibility
of your target and its portals (IP addresses) to remote initiators. This
control includes both the target's portals SendTargets discovery as well
as regular LUNs access.
This facility supersedes the obsolete initiators.[allow,deny] method,
which is going to be removed in one of the future versions.
This facility is available only in the sysfs build of iSCSI-SCST.
By default, all portals are available for the initiators.
1. If you want to enable/disable one or more target's portals for all
initiators, you should define one ore more allowed_portal attributes.
For example:
echo 'add_target_attribute iqn.2006-10.net.vlnb:tgt allowed_portal 10.170.77.2' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
will enable only portal 10.170.77.2 and disable all other portals
echo 'add_target_attribute iqn.2006-10.net.vlnb:tgt allowed_portal 10.170.77.2' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo 'add_target_attribute iqn.2006-10.net.vlnb:tgt allowed_portal 10.170.75.2' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
will enable only portals 10.170.77.2 and 10.170.75.2 and disable all
other portals.
echo 'add_target_attribute iqn.2006-10.net.vlnb:tgt allowed_portal 10.170.7?.2' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
will enable only portals 10.170.7x.2 and disable all other portals.
echo 'add_target_attribute iqn.2006-10.net.vlnb:tgt allowed_portal !*' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
will disable all portals.
2. If you want to want to allow only specific set of initiators be
able to connect to your target, you should don't add any default LUNs
for the target and create for allowed initiators a security group to
which they will be assigned.
For example, we want initiator iqn.2005-03.org.vlnb:cacdcd2520 and only
it be able to access target iqn.2006-10.net.vlnb:tgt:
echo 'add_target iqn.2006-10.net.vlnb:tgt' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo 'create allowed_ini' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/mgmt
echo 'add dev1 0' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/allowed_ini/luns/mgmt
echo 'add iqn.2005-03.org.vlnb:cacdcd2520' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/allowed_ini/initiators/mgmt
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/enabled
Since there will be no default LUNs for the target, all initiators other
than iqn.2005-03.org.vlnb:cacdcd2520 will be blocked from accessing it.
Alternatively, you can create an empty security group and filter out in
it all initiators except the allowed one:
echo 'add_target iqn.2006-10.net.vlnb:tgt' >/sys/kernel/scst_tgt/targets/iscsi/mgmt
echo 'add dev1 0' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/luns/mgmt
echo 'create denied_inis' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/mgmt
echo 'add !iqn.2005-03.org.vlnb:cacdcd2520' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/denied_inis/initiators/mgmt
echo 1 >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/enabled
3. If you want to enable/disable one or more target's portals for
particular initiators, you should set per_portal_acl attribute to 1 and
specify SCST access control to those initiators. If an SCST security
group doesn't have any LUNs, all the initiator, which should be assigned
to it, will not see this target and/or its portal. For example:
(We assume that an empty group "BLOCKING_GROUP" is already created by for
target iqn.2006-10.net.vlnb:tgt by command (see above for more information):
"echo 'create BLOCKING_GROUP' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/mgmt)
echo 'add iqn.2005-03.org.vlnb:cacdcd2520#10.170.77.2' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/BLOCKING_GROUP/initiators/mgmt
will block access of initiator iqn.2005-03.org.vlnb:cacdcd2520 to
target iqn.2006-10.net.vlnb:tgt portal 10.170.77.2.
Another example:
echo 'add iqn.2005-03.org.vlnb:cacdcd2520*' >/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/ini_groups/BLOCKING_GROUP/initiators/mgmt
will block access of initiator iqn.2005-03.org.vlnb:cacdcd2520 to
all target iqn.2006-10.net.vlnb:tgt portals.
Troubleshooting
---------------
If you have any problems, start troubleshooting from looking at the
kernel and system logs. In the kernel log iSCSI-SCST and SCST core send
their messages, in the system log iscsi-scstd sends its messages. In
most Linux distributions both those logs are put to /var/log/messages
file.
Then, it might be helpful to increase level of logging. For kernel
modules you should make the debug build, by either running "make 2debug"
if you work with SCST SVN tree, or by enabling the corresponding
debug symbols (see below).
If after looking on the logs the reason of your problem is still unclear
for you, report to SCST mailing list scst-devel@lists.sourceforge.net.
Work if target's backstorage or link is too slow
------------------------------------------------
In some cases you can experience I/O stalls or see in the kernel log
abort or reset messages. It can happen under high I/O load, when your
target's backstorage gets overloaded, or working over a slow link, when
the link can't serve all the queued commands on time,
To workaround it you can reduce QueuedCommands parameter for the
corresponding target to some lower value, like 8 (default is 32).
Also see SCST README file for more details about that issue and ways to
prevent it.
Performance advices
-------------------
1. If you use Windows XP or Windows 2003+ as initiators, you can
consider to decrease TcpAckFrequency parameter to 1. See
http://support.microsoft.com/kb/328890/ or google for "TcpAckFrequency"
for more details.
2. See how to get the maximum throughput from iSCSI, for instance, at
http://virtualgeek.typepad.com/virtual_geek/2009/01/a-multivendor-post-to-help-our-mutual-iscsi-customers-using-vmware.html.
It's about VMware, but its recommendations apply to other environments
as well.
3. ISCSI initiators from pre-CentOS/RHEL 5 reported to have some
performance problems. If you use it, it is strongly advised to upgrade.
4. If you are going to use your target in an VM environment, for
instance as a shared storage with VMware, make sure all your VMs
connected to the target via *separate* sessions, i.e. each VM has own
connection to the target, not all VMs connected using a single
connection. You can check it using SCST proc or sysfs interface. If you
miss it, you can greatly loose performance of parallel access to your
target from different VMs. This isn't related to the case if your VMs
are using the same shared storage, like with VMFS, for instance. In this
case all your VM hosts will be connected to the target via separate
sessions, which is enough.
5. Many dual port network adapters are not able to transfer data
simultaneously on both ports, i.e. they transfer data via both ports on
the same speed as via any single port. Thus, using such adapters in MPIO
configuration can't improve performance. To allow MPIO to have double
performance you should either use separate network adapters, or find a
dual-port adapter capable to transfer data simultaneously on both
ports. You can check it by running 2 iperf's through both ports in
parallel.
6. Since network offload works much better in the write direction, than
for reading (simplifying, in the read direction often there's additional
data copy) in many cases with 10GbE in a single initiator-target pair
the initiator's CPU is a bottleneck, so you can see the initiator can
read data on much slower rate, than write. You can check it by watching
*each particular* CPU load to find out if any of them is close to 100%
load, including IRQ processing load. Note, many tools like vmstat give
aggregate load on all CPUs, so with 4 cores 25% corresponds to 100% load
of any single CPU.
7. For high speed network adapters it can be better if you configure
them to serve connections, e.g., from initiator on CPU0 and from
initiator Y on CPU1. Then you can bind threads processing them also to
CPU0 and CPU1 correspondingly using cpu_mask attribute of their targets
or security groups. In NUMA-like configurations it can signficantly
boost IOPS performance.
8. See SCST core's README for more advices. Especially pay attention to
have io_grouping_type option set correctly.
Compilation options
-------------------
There are the following compilation options, that could be commented
in/out in the kernel's module Makefile:
- CONFIG_SCST_DEBUG - turns on some debugging code, including some logging.
Makes the driver considerably bigger and slower, producing large amount of
log data.
- CONFIG_SCST_TRACING - turns on ability to log events. Makes the driver
considerably bigger and leads to some performance loss.
- CONFIG_SCST_EXTRACHECKS - adds extra validity checks in the various places.
- CONFIG_SCST_ISCSI_DEBUG_DIGEST_FAILURES - simulates digest failures in
random places.
Credits
-------
Thanks to:
* Ming Zhang <blackmagic02881@gmail.com> for fixes
* Krzysztof Blaszkowski <kb@sysmikro.com.pl> for many fixes
* Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> for comments and help in
debugging
* Tomasz Chmielewski <mangoo@wpkg.org> for testing and suggestions
* Bart Van Assche <bvanassche@acm.org> for a lot of help
Vladislav Bolkhovitin <vst@vlnb.net>, http://scst.sourceforge.net
Reference in New Issue View Git Blame Copy Permalink