mirror of
https://github.com/SCST-project/scst.git
synced 2026-05-25 07:51:28 +00:00
svn+ssh://yanb123@svn.code.sf.net/p/scst/svn/trunk
........
r5322 | vlnb | 2014-03-05 05:27:21 +0200 (Wed, 05 Mar 2014) | 13 lines
scst_vdisk: Make vdisk_nullio size configurable
Keep the default size of vdisk_nullio devices at VDISK_NULLIO_SIZE. Add
a sysfs attribute 'size' which is the size of a vdisk device in
bytes. Make the size of vdisk_nullio devices configurable. Accept
"size" and "size_mb" as creation parameters for vdisk_nullio
devices. Generate a CAPACITY DATA HAS CHANGED unit attention after size
changes. Refuse any attempt to change the size into a number that is
not a multiple of the block size.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5323 | bvassche | 2014-03-06 09:29:00 +0200 (Thu, 06 Mar 2014) | 1 line
scst_vdisk: Avoid that smatch complains about unreachable code
........
r5324 | vlnb | 2014-03-07 06:02:39 +0200 (Fri, 07 Mar 2014) | 27 lines
PERSISTENT RESERVE IN: Suppress a kernel warning for small output buffer sizes
This patch suppresses the following error message and kernel warning:
scst: ***ERROR***: Too big response data len 24 (max 8), limiting it to the max (dev iis)
Call Trace:
[<ffffffff818b1193>] ? dump_stack+0x41/0x56
[<ffffffffa01c1a8f>] ? scst_set_resp_data_len+0x82/0xb1 [scst]
[<ffffffffa01ca80f>] ? scst_pr_read_reservation+0xbf/0xc4 [scst]
[<ffffffffa01b707b>] ? scst_persistent_reserve_in_local+0x140/0x1ce [scst]
[<ffffffffa01b7cee>] ? scst_exec_check_blocking+0x57/0xf1 [scst]
[<ffffffffa01b85f4>] ? scst_process_active_cmd+0x86c/0x136f [scst]
[<ffffffffa01b913c>] ? scst_do_job_active+0x45/0x5b [scst]
[<ffffffffa01b939c>] ? scst_cmd_thread+0x218/0x2b7 [scst]
[<ffffffff8105292a>] ? wake_up_bit+0x23/0x23
[<ffffffffa01b9184>] ? scst_cmd_tasklet+0x32/0x32 [scst]
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
[<ffffffffa01b9184>] ? scst_cmd_tasklet+0x32/0x32 [scst]
[<ffffffff81052400>] ? kthread+0xab/0xb3
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
[<ffffffff818b4e3c>] ? ret_from_fork+0x7c/0xb0
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
Reported-by: Roman Bogdanov <bogdanovr@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5325 | bvassche | 2014-03-08 15:30:29 +0200 (Sat, 08 Mar 2014) | 1 line
nightly build: Update kernel versions
........
r5326 | vlnb | 2014-03-13 05:50:37 +0200 (Thu, 13 Mar 2014) | 3 lines
Update link to Gentoo HOWTO from Jurie Botha
........
r5329 | vlnb | 2014-03-15 03:38:06 +0200 (Sat, 15 Mar 2014) | 3 lines
Cleanup
........
r5330 | vlnb | 2014-03-15 03:38:37 +0200 (Sat, 15 Mar 2014) | 3 lines
Implement REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS command
........
r5331 | vlnb | 2014-03-15 03:40:57 +0200 (Sat, 15 Mar 2014) | 8 lines
scst_vdisk: Remove an unused parameter from vdisk_fsync*()
The "struct vdisk_cmd_params *p" parameter is neither used by vdisk_fsync(),
vdisk_fsync_blockio() nor by vdisk_fsync_fileio() so remove it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5332 | vlnb | 2014-03-15 03:42:06 +0200 (Sat, 15 Mar 2014) | 8 lines
vdisk_blockio: Change default vendor name back to "SCST_BIO"
In r5316 the default vendor name for vdisk_blockio devices was changed
into "SCST_FIO". Change this back into "SCST_BIO".
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5333 | vlnb | 2014-03-15 03:44:35 +0200 (Sat, 15 Mar 2014) | 8 lines
vdisk_blockio: Add VERIFY implementation
There is already an implementation of the VERIFY command for vdisk_fileio
devices. Add an implementation for vdisk_blockio devices.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5334 | vlnb | 2014-03-15 04:01:17 +0200 (Sat, 15 Mar 2014) | 8 lines
scst_vdisk: Implement COMPARE AND WRITE
Ensure that COMPARE AND WRITE is executed atomically by serializing
all COMPARE AND WRITE commands per device (SCST_SERIALIZED).
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5335 | vlnb | 2014-03-15 04:09:17 +0200 (Sat, 15 Mar 2014) | 5 lines
Fix URL to SCST website
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
........
r5336 | vlnb | 2014-03-15 04:13:58 +0200 (Sat, 15 Mar 2014) | 3 lines
Cleanup
........
r5337 | bvassche | 2014-03-15 08:47:26 +0200 (Sat, 15 Mar 2014) | 1 line
scripts/kernel-functions: Kernel 3.13.6 build fix
........
r5338 | bvassche | 2014-03-16 15:38:50 +0200 (Sun, 16 Mar 2014) | 1 line
srpt: Minor buid process terminology change
........
r5339 | bvassche | 2014-03-18 17:35:13 +0200 (Tue, 18 Mar 2014) | 1 line
ib_srpt: Avoid that session logout hangs sporadically
........
r5340 | vlnb | 2014-03-19 06:28:46 +0200 (Wed, 19 Mar 2014) | 8 lines
scst/README: Show how to read SCST sysfs attributes
Make the behavior of SCST sysfs attributes more clear by adding
examples in scst/README of code for reading and writing these attributes.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5344 | bvassche | 2014-03-20 17:13:50 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Simplify srpt_handle_cmd()
........
r5345 | bvassche | 2014-03-20 17:14:45 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Micro-optimize I/O context state manipulation
All ioctx->state manipulations are serialized per command so it is
not necessary to use locking to protect these manipulations.
........
r5346 | bvassche | 2014-03-20 17:15:54 +0200 (Thu, 20 Mar 2014) | 8 lines
ib_srpt: Handle GID change events properly
The mlx4_core driver generates a GID change event after a port has been
changed from IB into Ethernet mode. Avoid that this causes the following
error message to appear in the system log:
ib_srpt: ***ERROR***: received unrecognized IB event 18
........
r5347 | bvassche | 2014-03-20 17:16:27 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt/Makefile: Add kerneldoc target
........
r5348 | bvassche | 2014-03-20 17:17:04 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Fix an error reported by the kerneldoc tool
........
r5349 | bvassche | 2014-03-20 17:18:06 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Avoid that cmd_wait_list processing triggers command reordering
Although harmless for SCSI commands with SIMPLE ordering, avoid that commands
received before RTU can get reordered.
........
r5350 | bvassche | 2014-03-20 17:18:38 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Micro-optimize SRP_CMD parsing
........
r5351 | bvassche | 2014-03-20 17:19:05 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Sync information unit memory only once
........
r5352 | bvassche | 2014-03-20 17:19:34 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Introduce a temporary variable in srpt_handle_new_iu()
........
r5353 | bvassche | 2014-03-20 17:20:55 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Micro-optimize polling
........
r5354 | bvassche | 2014-03-20 17:22:19 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Rework multi-channel support
Store initiator and target port ID's once per nexus instead of in each
channel data structure.
........
r5355 | bvassche | 2014-03-20 17:23:16 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Simplify channel state management code
........
r5356 | bvassche | 2014-03-20 17:24:18 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Defer destroying the QP until the TimeWait state has been left
This is necessary to avoid that a login gets rejected due to reusing a
queue pair number that has not yet been freed by the target side.
........
r5357 | bvassche | 2014-03-20 17:25:34 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Rework waiting for last WQE
After having changed the queue pair state into "error", queue an additional
work request instead of waiting for the last WQE event.
........
r5358 | bvassche | 2014-03-20 17:26:48 +0200 (Thu, 20 Mar 2014) | 1 line
srpt/session-management.txt: Document how sessions are managed by the ib_srpt driver
........
r5359 | bvassche | 2014-03-20 18:10:19 +0200 (Thu, 20 Mar 2014) | 1 line
scst_const.h: Make COMPARE_AND_WRITE definition available for kernel versions 3.6..3.11
........
r5360 | vlnb | 2014-03-21 03:58:13 +0200 (Fri, 21 Mar 2014) | 3 lines
In VERIFY commands BYTCHK 1x is not supported (yet)
........
r5361 | bvassche | 2014-03-21 18:29:26 +0200 (Fri, 21 Mar 2014) | 1 line
srpt/Makefile: Avoid that the build process depends on source control tools
........
r5362 | vlnb | 2014-03-22 01:12:42 +0200 (Sat, 22 Mar 2014) | 3 lines
Fix error recovery of internal commands
........
r5363 | bvassche | 2014-03-24 13:53:00 +0200 (Mon, 24 Mar 2014) | 1 line
ib_srpt: Clarify a kernel-doc comment
........
r5364 | bvassche | 2014-03-24 13:55:56 +0200 (Mon, 24 Mar 2014) | 1 line
ib_srpt: Add newline at the end of kernel warning statements
........
r5365 | bvassche | 2014-03-24 13:57:39 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Change the severity level of a log message
Make sure that target port state changes get logged even with
debugging disabled.
........
r5366 | bvassche | 2014-03-24 13:59:27 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Clean up srpt_destroy_ch_ib()
All callers guarantee that the completion queue is empty so it is
not necessary to invoke ib_poll_cq() from inside this function.
........
r5367 | bvassche | 2014-03-24 14:01:07 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Micro-optimize srpt_adjust_srq_wr_avail()
The overhead of atomic_add_return() is lower than that of a
spin_lock() / spin_unlock() pair, hence switch to the former.
........
r5368 | bvassche | 2014-03-24 14:03:09 +0200 (Mon, 24 Mar 2014) | 20 lines
ib_srpt: Fix a kernel warning
Avoid that the following (very rare) kernel warning is reported
when an ib_srpt target port is disabled while I/O is ongoing:
WARNING: CPU: 3 PID: 12259 at srpt/src/ib_srpt.c:3334 srpt_xmit_response+0x165/0x300 [ib_srpt]()
Unexpected command state 6
Call Trace:
[<ffffffff814a15dc>] dump_stack+0x4e/0x7a
[<ffffffff8104bc5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8104bccc>] warn_slowpath_fmt+0x4c/0x50
[<ffffffffa0771525>] srpt_xmit_response+0x165/0x300 [ib_srpt]
[<ffffffffa082aacc>] scst_xmit_response+0xbc/0x560 [scst]
[<ffffffffa083123d>] scst_process_active_cmd+0x29d/0x7b0 [scst]
[<ffffffffa0832bd9>] scst_do_job_active+0x89/0x1a0 [scst]
[<ffffffffa0832e4f>] scst_cmd_thread+0x15f/0x350 [scst]
[<ffffffff810766cd>] kthread+0xed/0x110
[<ffffffff814b312c>] ret_from_fork+0x7c/0xb0
---[ end trace 591f7af7d006fc0e ]---
........
r5369 | bvassche | 2014-03-24 14:04:44 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Add a kernel warning
Invoking srpt_zerolength_write() before the queue pair has reached
the error state is a bug, so complain loudly if that happens.
........
r5370 | bvassche | 2014-03-24 14:07:43 +0200 (Mon, 24 Mar 2014) | 7 lines
ib_srpt: Avoid waiting for missing error completions
Apparently with mlx4 firmware up to and including 2.30.8000 it is not
guaranteed that for a QP associated with an SRQ error completions are
generated for all pending work requests. Avoid triggering
srpt_pending_cmd_timeout() for missing error completions.
........
r5371 | bvassche | 2014-03-25 18:19:00 +0200 (Tue, 25 Mar 2014) | 1 line
nightly build: Update kernel versions
........
r5382 | vlnb | 2014-03-26 04:31:52 +0200 (Wed, 26 Mar 2014) | 6 lines
Black hole functionality added
Scst_mutex intentially used directly in the sysfs handler, because
comming sysfs improvements will allow that.
........
r5383 | vlnb | 2014-03-26 05:18:03 +0200 (Wed, 26 Mar 2014) | 5 lines
documentation: Document SCST_SERIALIZED and SCST_STRICTLY_SERIALIZED
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5384 | vlnb | 2014-03-26 05:18:36 +0200 (Wed, 26 Mar 2014) | 3 lines
Cleanup
........
r5385 | vlnb | 2014-03-26 05:20:04 +0200 (Wed, 26 Mar 2014) | 9 lines
scst_local: Remove two superfluous tests
The to_scst_lcl_sess() macro is based on container_of() and hence never
returns NULL. Hence remove the two tests that compare the result of that
macro against NULL.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5386 | vlnb | 2014-03-26 05:21:25 +0200 (Wed, 26 Mar 2014) | 7 lines
iscsi-scst: Introduce ARRAY_SIZE()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5387 | vlnb | 2014-03-26 05:22:16 +0200 (Wed, 26 Mar 2014) | 8 lines
scst: Clarify a comment
The comment above scst_nexus_loss() is somewhat confusing so change
it into something that is more clear.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5388 | vlnb | 2014-03-26 05:23:57 +0200 (Wed, 26 Mar 2014) | 9 lines
scst_vdisk: Fix READ CAPACITY(10)
SBC-2 defines the LBA as a 32-bit field that starts at offset 2 and
not as a 64-bit field.
Reported-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5389 | bvassche | 2014-03-26 13:56:13 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_rdma_comp()
This patch does not change any functionality.
........
r5390 | bvassche | 2014-03-26 13:56:59 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_send_err_comp()
This patch does not change any functionality.
........
r5391 | bvassche | 2014-03-26 13:58:25 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_rdma_err_comp()
This patch does not change any functionality.
........
r5392 | bvassche | 2014-03-26 13:59:37 +0200 (Wed, 26 Mar 2014) | 5 lines
ib_srpt: Suppress superfluous error messages
Only complain about a missing completion for I/O contexts that are
in a state where the ib_srpt driver is waiting for the HCA.
........
r5393 | bvassche | 2014-03-26 14:00:43 +0200 (Wed, 26 Mar 2014) | 5 lines
ib_srpt: Make srpt_abort_cmd() state checks more strict
Complain if srpt_abort_cmd() is called for an I/O context that is
being processed by SCST and not by the HCA.
........
r5394 | vlnb | 2014-03-27 00:16:16 +0200 (Thu, 27 Mar 2014) | 3 lines
Cosmetics
........
r5395 | vlnb | 2014-03-27 01:51:36 +0200 (Thu, 27 Mar 2014) | 3 lines
Reimplement dropping of TM requests in a more reliable manner
........
r5396 | vlnb | 2014-03-27 03:57:08 +0200 (Thu, 27 Mar 2014) | 3 lines
Possibility to specify SCSI target device name added
........
r5397 | bvassche | 2014-03-27 10:27:45 +0200 (Thu, 27 Mar 2014) | 6 lines
Fix two checkpatch complaints about whitespace
Avoid that checkpatch reports the following error message:
ERROR: "(foo*)" should be "(foo *)"
........
r5398 | bvassche | 2014-03-27 10:34:27 +0200 (Thu, 27 Mar 2014) | 6 lines
Avoid that checkpatch complains that return is not a function
Avoid that checkpatch reports the following error message:
ERROR: return is not a function, parentheses are not required
........
r5399 | bvassche | 2014-03-27 10:39:53 +0200 (Thu, 27 Mar 2014) | 1 line
scripts/generate-kernel-patch: Fix for kernel versions 3.7, 3.10, 3.12 and 3.13
........
r5400 | vlnb | 2014-03-29 04:07:22 +0300 (Sat, 29 Mar 2014) | 3 lines
Cleanup
........
r5401 | bvassche | 2014-04-01 20:46:36 +0300 (Tue, 01 Apr 2014) | 1 line
vdisk_blockio: Temporarily disable COMPARE AND WRITE support
........
r5402 | bvassche | 2014-04-02 00:05:31 +0300 (Wed, 02 Apr 2014) | 1 line
vdisk_blockio: Fix the (recently enabled) VERIFY command
........
r5403 | bvassche | 2014-04-03 18:58:16 +0300 (Thu, 03 Apr 2014) | 1 line
ib_srpt: RHEL 6.5 build fix
........
r5404 | vlnb | 2014-04-04 03:57:30 +0300 (Fri, 04 Apr 2014) | 3 lines
Fix typo in scst_report_supported_tm_fns() reported by Steve Magnani <steve.magnani@digidescorp.com>
........
r5405 | bvassche | 2014-04-04 07:38:33 +0300 (Fri, 04 Apr 2014) | 1 line
scripts/specialize-patch: Handle numbers surrounded by parentheses properly
........
r5406 | bvassche | 2014-04-04 08:50:52 +0300 (Fri, 04 Apr 2014) | 1 line
scripts/specialize-patch: Rework r5405
........
r5407 | bvassche | 2014-04-04 08:56:25 +0300 (Fri, 04 Apr 2014) | 1 line
nightly build: Update kernel versions
........
git-svn-id: http://svn.code.sf.net/p/scst/svn/branches/iser@5408 d57e44dd-8a1f-0410-8b47-8ef2f437770f
150 lines
6.1 KiB
Makefile
150 lines
6.1 KiB
Makefile
#
|
|
# Makefile for ib_srpt.ko.
|
|
#
|
|
ifndef PREFIX
|
|
PREFIX=/usr/local
|
|
endif
|
|
|
|
SCST_INC_DIR := $(shell if [ -e "$$PWD/../scst" ]; \
|
|
then echo "$$PWD/../scst/include"; \
|
|
else echo "$(DESTDIR)$(PREFIX)/include/scst"; fi)
|
|
SCST_SYMVERS_DIR := $(shell if [ -e $$PWD/../scst ]; then \
|
|
echo $$PWD/../scst/src; \
|
|
else echo $(DESTDIR)$(PREFIX)/include/scst; fi)
|
|
SUBDIRS := $(shell pwd)
|
|
|
|
ifeq ($(KVER),)
|
|
ifeq ($(KDIR),)
|
|
KVER := $(shell uname -r)
|
|
KDIR := /lib/modules/$(KVER)/build
|
|
else
|
|
ifeq ($(KERNELRELEASE),)
|
|
KVER := $(strip $(shell \
|
|
cat $(KDIR)/include/config/kernel.release 2>/dev/null || \
|
|
make -s -C $(KDIR) kernelversion))
|
|
else
|
|
KVER := $(KERNELRELEASE)
|
|
endif
|
|
endif
|
|
else
|
|
KDIR := /lib/modules/$(KVER)/build
|
|
endif
|
|
|
|
ifeq ($(INSTALL_MOD_PATH),)
|
|
export INSTALL_MOD_PATH := $(DESTDIR)
|
|
endif
|
|
|
|
INSTALL_DIR := $(INSTALL_MOD_PATH)/lib/modules/$(KVER)/extra
|
|
|
|
# Set variable $(2) to value $(3) in file $(1).
|
|
set_var = $(shell { if [ -e "$(1)" ]; then grep -v '^$(2)=' "$(1)"; fi; echo "$(2)=$(3)"; } >/tmp/$(1)-$$$$.tmp && mv /tmp/$(1)-$$$$.tmp $(1))
|
|
|
|
|
|
SRC_FILES=$(wildcard */*.[ch])
|
|
|
|
# The file Modules.symvers has been renamed in the 2.6.18 kernel to
|
|
# Module.symvers. Find out which name to use by looking in $(KDIR).
|
|
MODULE_SYMVERS:=$(shell if [ -e $(KDIR)/Module.symvers ]; then \
|
|
echo Module.symvers; else echo Modules.symvers; fi)
|
|
|
|
# Whether or not the OFED kernel modules have been installed.
|
|
OFED_KERNEL_IB_RPM_INSTALLED:=$(shell if rpm -q kernel-ib 2>/dev/null | grep -q $$(uname -r | sed 's/-/_/g'); then echo true; else echo false; fi)
|
|
|
|
# Whether or not the OFED kernel-ib-devel RPM has been installed.
|
|
OFED_KERNEL_IB_DEVEL_RPM_INSTALLED:=$(shell if rpm -q kernel-ib-devel 2>/dev/null | grep -q $$(uname -r | sed 's/-/_/g'); then echo true; else echo false; fi)
|
|
|
|
ifeq ($(OFED_KERNEL_IB_DEVEL_RPM_INSTALLED),true)
|
|
# Read OFED's config.mk, which contains the definition of the variable
|
|
# BACKPORT_INCLUDES.
|
|
include /usr/src/ofa_kernel/config.mk
|
|
endif
|
|
|
|
OFED_CFLAGS:=$(shell if $(OFED_KERNEL_IB_DEVEL_RPM_INSTALLED); then echo $(BACKPORT_INCLUDES) -I/usr/src/ofa_kernel/include; fi)
|
|
|
|
# Path of the OFED ib_srpt.ko kernel module.
|
|
OFED_SRPT_PATH:=/lib/modules/$(KVER)/updates/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko
|
|
|
|
# Whether or not the OFED ib_srpt.ko kernel module has been installed.
|
|
OFED_SRPT_INSTALLED:=$(shell if [ -e $(OFED_SRPT_PATH) ]; then echo true; else echo false; fi)
|
|
|
|
|
|
all: src/$(MODULE_SYMVERS)
|
|
$(MAKE) -C $(KDIR) SUBDIRS=$(shell pwd)/src \
|
|
PRE_CFLAGS="$(OFED_CFLAGS)" SCST_INC_DIR=$(SCST_INC_DIR) modules
|
|
|
|
install: all src/ib_srpt.ko
|
|
$(MAKE) -C $(KDIR) SUBDIRS=$(shell pwd)/src \
|
|
PRE_CFLAGS="$(OFED_CFLAGS)" SCST_INC_DIR=$(SCST_INC_DIR) \
|
|
modules_install
|
|
|
|
uninstall:
|
|
rm -f $(INSTALL_DIR)/ib_srpt.ko
|
|
-/sbin/depmod -b $(INSTALL_MOD_PATH)/ -a $(KVER)
|
|
|
|
src/Module.symvers src/Modules.symvers: $(SCST_SYMVERS_DIR)/$(MODULE_SYMVERS)
|
|
@if $(OFED_KERNEL_IB_RPM_INSTALLED); then \
|
|
if ! $(OFED_KERNEL_IB_DEVEL_RPM_INSTALLED); then \
|
|
echo "Error: the OFED package kernel-ib-devel has not yet been" \
|
|
"installed."; \
|
|
false; \
|
|
elif [ -e /lib/modules/$(KVER)/kernel/drivers/infiniband ]; then \
|
|
echo "Error: the distro-provided InfiniBand kernel drivers" \
|
|
"must be removed first."; \
|
|
false; \
|
|
elif $(OFED_SRPT_INSTALLED); then \
|
|
echo "Error: OFED has been built with srpt=y in ofed.conf."; \
|
|
echo "Rebuild OFED with srpt=n."; \
|
|
false; \
|
|
elif [ -e $(KDIR)/scripts/Makefile.lib ] \
|
|
&& ! grep -wq '^c_flags .*PRE_CFLAGS' \
|
|
$(KDIR)/scripts/Makefile.lib \
|
|
&& ! grep -wq '^LINUXINCLUDE .*PRE_CFLAGS' \
|
|
$(KDIR)/Makefile; then \
|
|
echo "Error: the kernel build system has not yet been patched.";\
|
|
false; \
|
|
else \
|
|
echo " Building against OFED InfiniBand kernel headers."; \
|
|
( \
|
|
grep -v drivers/infiniband/ $<; \
|
|
cat /usr/src/ofa_kernel/Module.symvers \
|
|
) >$@; \
|
|
fi \
|
|
else \
|
|
if $(OFED_KERNEL_IB_DEVEL_RPM_INSTALLED); then \
|
|
echo "Error: the OFED package kernel-ib has not yet been" \
|
|
"installed."; \
|
|
false; \
|
|
else \
|
|
echo " Building against in-tree InfiniBand kernel headers."; \
|
|
cp $< $@; \
|
|
fi; \
|
|
fi
|
|
|
|
clean:
|
|
$(MAKE) -C $(KDIR) SUBDIRS=$(shell pwd)/src clean
|
|
rm -f src/Modules.symvers src/Module.symvers src/Module.markers \
|
|
src/modules.order
|
|
|
|
extraclean: clean
|
|
rm -f *.orig *.rej
|
|
|
|
2debug:
|
|
-$(MAKE) clean
|
|
$(call set_var,build_mode,BUILDMODE,)
|
|
|
|
2release:
|
|
-$(MAKE) clean
|
|
$(call set_var,build_mode,BUILDMODE,RELEASE)
|
|
|
|
2perf:
|
|
-$(MAKE) clean
|
|
$(call set_var,build_mode,BUILDMODE,PERF)
|
|
|
|
release-archive:
|
|
../scripts/generate-release-archive srpt "$$(sed -n 's/^#define[[:blank:]]DRV_VERSION[[:blank:]]*\"\([^\"]*\)\".*/\1/p' src/ib_srpt.c)"
|
|
|
|
kerneldoc.html: $(SRC_FILES)
|
|
$(KDIR)/scripts/kernel-doc -html $(SRC_FILES) >$@
|
|
|
|
.PHONY: all install clean extraclean 2debug 2release 2perf
|