Files
scst/Makefile
T
Yan Burman e4c7d430c1 Merged revisions 5536-5539,5543,5545,5547,5555,5557-5558,5560-5563,5566-5575,5577-5579,5581-5590,5592-5598,5600-5603,5605-5622,5624-5631,5647-5651,5654,5657-5659,5661-5662 via svnmerge from
svn+ssh://yanb123@svn.code.sf.net/p/scst/svn/trunk

........
  r5536 | vlnb | 2014-05-22 06:06:46 +0300 (Thu, 22 May 2014) | 3 lines
  
  Version changed to 3.1.0-pre1
........
  r5537 | vlnb | 2014-05-22 06:18:27 +0300 (Thu, 22 May 2014) | 3 lines
  
  Web updates
........
  r5538 | bvassche | 2014-05-22 10:16:04 +0300 (Thu, 22 May 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5539 | vlnb | 2014-05-23 05:20:35 +0300 (Fri, 23 May 2014) | 9 lines
  
  vdisk_nullio: Add "read_zero" attribute
  
  Add an attribute called "read_zero" to vdisk_nullio devices that
  controls whether or not READs from a vdisk_nullio device return
  zeroed data buffers.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5543 | bvassche | 2014-05-23 10:33:53 +0300 (Fri, 23 May 2014) | 1 line
  
  RHEL 7 build fixes
........
  r5545 | bvassche | 2014-05-23 11:36:36 +0300 (Fri, 23 May 2014) | 1 line
  
  scripts/rebuild-rhel-kernel-rpm: Add RHEL 7 RC support
........
  r5547 | vlnb | 2014-05-24 06:10:34 +0300 (Sat, 24 May 2014) | 3 lines
  
  Optimize read_zero functionality
........
  r5555 | bvassche | 2014-05-27 14:59:11 +0300 (Tue, 27 May 2014) | 5 lines
  
  qla2x00t: Documentation / source code comment / log messages spelling fix
  
  Change a few occurrences of "conformation" into "confirmation". See also the
  QLogic 2500 Series Firmware Interface Specification.
........
  r5557 | vlnb | 2014-05-30 03:42:34 +0300 (Fri, 30 May 2014) | 5 lines
  
  Small code reorganization.
  
  No functionality changed
........
  r5558 | vlnb | 2014-05-30 06:00:07 +0300 (Fri, 30 May 2014) | 3 lines
  
  Logging fixes
........
  r5560 | bvassche | 2014-06-02 18:31:50 +0300 (Mon, 02 Jun 2014) | 1 line
  
  Makefile: Only report which RPMs have been built if "make rpm" is run as a non-privileged user
........
  r5561 | bvassche | 2014-06-03 09:04:47 +0300 (Tue, 03 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5562 | vlnb | 2014-06-04 04:54:21 +0300 (Wed, 04 Jun 2014) | 3 lines
  
  Decrease max WRITE SAME length for better latencies
........
  r5563 | vlnb | 2014-06-04 05:16:51 +0300 (Wed, 04 Jun 2014) | 3 lines
  
  Enforce limit on max unmap LBAs
........
  r5566 | bvassche | 2014-06-04 18:14:22 +0300 (Wed, 04 Jun 2014) | 1 line
  
  ib_srpt: Fix an error message
........
  r5567 | bvassche | 2014-06-04 18:17:59 +0300 (Wed, 04 Jun 2014) | 1 line
  
  ib_srpt: Avoid triggering a SCSI command timeout after login
........
  r5568 | bvassche | 2014-06-05 09:34:19 +0300 (Thu, 05 Jun 2014) | 1 line
  
  scst_vdisk: Build fix for kernel versions <= 2.6.32
........
  r5569 | bvassche | 2014-06-05 09:46:57 +0300 (Thu, 05 Jun 2014) | 1 line
  
  scst_vdisk: Fix a kernel version < 2.6.38 compiler warning
........
  r5570 | vlnb | 2014-06-06 06:20:26 +0300 (Fri, 06 Jun 2014) | 8 lines
  
  scst_lib: Fix a compiler warning triggered by the WRITE SAME implementation
  
  Avoid for release builds that the compiler reports that the variable
  'ws_sg_cnt' is not used.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5571 | vlnb | 2014-06-06 06:22:14 +0300 (Fri, 06 Jun 2014) | 7 lines
  
  nullio_exec_read(): Fix kunmap() argument
  
  The argument of kunmap() is of type struct page *. Detected by smatch.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5572 | vlnb | 2014-06-06 06:24:03 +0300 (Fri, 06 Jun 2014) | 11 lines
  
  scst: Leave out FSF mail address
  
  This avoids that the following checkpatch complaint is triggered:
  
  Do not include the paragraph about writing to the Free Software Foundation's
  mailing address from the sample GPL notice. The FSF has changed addresses in
  the past, and may do so again. Linux already includes a copy of the GPL.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5573 | vlnb | 2014-06-06 06:26:55 +0300 (Fri, 06 Jun 2014) | 10 lines
  
  scst: Make lockdep_assert_held() easier to use
  
  The lockdep_assert_held() macro is a convenient debugging tool.
  However, it is inconvenient to surround each invocation of that
  macro by an #ifdef/#endif pair. Hence make it easier to use this
  macro with older kernel versions.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5574 | vlnb | 2014-06-07 00:59:24 +0300 (Sat, 07 Jun 2014) | 3 lines
  
  Use limits.discard_zeroes_data to set LBPRZ
........
  r5575 | bvassche | 2014-06-07 13:46:49 +0300 (Sat, 07 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5577 | bvassche | 2014-06-10 17:16:14 +0300 (Tue, 10 Jun 2014) | 1 line
  
  ib_srpt: Make the test for IB_EVENT_GID_CHANGE support more robust
........
  r5578 | bvassche | 2014-06-10 17:49:59 +0300 (Tue, 10 Jun 2014) | 1 line
  
  ib_srpt: Make IB_EVENT_GID_CHANGE test independent of the OFED detection code
........
  r5579 | bvassche | 2014-06-11 13:02:15 +0300 (Wed, 11 Jun 2014) | 1 line
  
  ib_srpt: RHEL 5 build fix
........
  r5581 | bvassche | 2014-06-11 18:27:06 +0300 (Wed, 11 Jun 2014) | 1 line
  
  regression tests: Sync with a recent sysfs change
........
  r5582 | bvassche | 2014-06-11 18:27:48 +0300 (Wed, 11 Jun 2014) | 1 line
  
  regression tests: Sort hash keys before comparing
........
  r5583 | bvassche | 2014-06-11 18:41:01 +0300 (Wed, 11 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5584 | vlnb | 2014-06-11 22:33:18 +0300 (Wed, 11 Jun 2014) | 8 lines
  
  scst: RHEL 5 build fix
  
  Avoid that building the scst kernel module fails on RHEL 5 due to
  a missing kvasprintf() implementation.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5585 | vlnb | 2014-06-11 22:38:10 +0300 (Wed, 11 Jun 2014) | 11 lines
  
  scst: Remove unused variables
  
  Avoid that building scst with W=1 triggers compiler warnings about
  variables that are set but not used. See also the documentation of
  the gcc compiler flag -Wunused-but-set-variable.
  
  This patch does not change any functionality.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5586 | vlnb | 2014-06-11 22:39:51 +0300 (Wed, 11 Jun 2014) | 9 lines
  
  scst_lib: Introduce additional temporary variables
  
  Make the code slightly easier to read by introducing temporary
  variables for the expressions 'tgt_dev->sess' and 'sess->tgt->tgtt'.
  This patch does not change any functionality.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5587 | vlnb | 2014-06-11 23:57:03 +0300 (Wed, 11 Jun 2014) | 10 lines
  
  scst: Add support for 64-bit LUNs
  
  The datatype of scsi_device.lun will be changed from u32 into u64
  in the near future. Update SCST accordingly. These changes have
  been implemented such that these are compatible with 32-bit and
  64-bit LUNs.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5588 | vlnb | 2014-06-12 00:00:16 +0300 (Thu, 12 Jun 2014) | 9 lines
  
  scst_local: Support LUN numbers >= 16384
  
  Add support for 32-bit LUN numbers. As soon as the patches that add
  64-bit LUN support are upstream this patch will also make 64-bit
  LUN support available in scst_local.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5589 | vlnb | 2014-06-12 00:42:08 +0300 (Thu, 12 Jun 2014) | 8 lines
  
  scst: Clean up __scst_resume_activity()
  
  Move all management commands from scst_delayed_mgmt_cmd_list to the
  active command list during resume instead of only the first one.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5590 | vlnb | 2014-06-12 01:07:00 +0300 (Thu, 12 Jun 2014) | 9 lines
  
  scst: Introduce scst_lookup_tgt_dev()
  
  This patch does not change any functionality.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
  
  with some improvements
........
  r5592 | bvassche | 2014-06-12 11:38:45 +0300 (Thu, 12 Jun 2014) | 7 lines
  
  scst.h: Move definition of swap()
  
  Make sure that the definition of swap() is guarded by
  "#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)" only instead
  of "#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 28)" and
  "#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)".
........
  r5593 | bvassche | 2014-06-12 12:15:50 +0300 (Thu, 12 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5594 | bvassche | 2014-06-12 14:33:00 +0300 (Thu, 12 Jun 2014) | 1 line
  
  ib_srpt: Set MOFED include path correctly if MOFED has been installed with --add-kernel-support
........
  r5595 | bvassche | 2014-06-12 16:38:38 +0300 (Thu, 12 Jun 2014) | 1 line
  
  ib_srpt: Make non-OFED build work again
........
  r5596 | vlnb | 2014-06-13 07:52:18 +0300 (Fri, 13 Jun 2014) | 16 lines
  
  scst: Switch from the cpu_*() to the cpumask_*() API
  
  The cpus_*() functions were deprecated via patch "cpumask:
  introduce new API, without changing anything" (November 2008,
  commit ID 2d3854a37e8b). Hence switch from the cpus_*() API to
  the cpumask_*() API.
  
  This patch has the intended side effect of not adding the "[key]"
  property to cpumask sysfs attributes that contain the default
  cpumask. The current code namely reads uninitialized bits on
  systems where nr_cpu_ids < NR_CPUS because cpus_equal() compares
  more bits than those that were set by cpumask_copy().
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5597 | vlnb | 2014-06-13 08:03:17 +0300 (Fri, 13 Jun 2014) | 3 lines
  
  Forgotten versions updated
........
  r5598 | bvassche | 2014-06-13 09:55:23 +0300 (Fri, 13 Jun 2014) | 1 line
  
  ib_srpt: Make one_target_per_port the default mode
........
  r5600 | vlnb | 2014-06-14 01:24:06 +0300 (Sat, 14 Jun 2014) | 9 lines
  
  scst: Avoid that W=1 triggers complaints about unused variables
  
  Avoid that building scst with W=1 triggers compiler warnings about
  variables that are set but not used. See also the documentation of
  the gcc compiler flag -Wunused-but-set-variable.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5601 | vlnb | 2014-06-14 01:31:42 +0300 (Sat, 14 Jun 2014) | 8 lines
  
  scst_local: Add close_session() callback function
  
  This is useful for triggering the session reassignment code via
  the scst_local driver.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5602 | vlnb | 2014-06-14 02:57:26 +0300 (Sat, 14 Jun 2014) | 8 lines
  
  scst_pr_read_reservation(): Initialize returned buffer
  
  Avoid that this function returns an uninitialized buffer to the
  initiator if buffer_size < 8. Detected by Coverity.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5603 | vlnb | 2014-06-14 02:58:28 +0300 (Sat, 14 Jun 2014) | 5 lines
  
  scst: Help Coverity recognize that vmalloc(0) returns NULL
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5605 | bvassche | 2014-06-14 20:10:58 +0300 (Sat, 14 Jun 2014) | 1 line
  
  fcst: Remove an unused variable
........
  r5606 | bvassche | 2014-06-14 20:17:56 +0300 (Sat, 14 Jun 2014) | 5 lines
  
  fcst: Move exch_done() calls into ft_cmd_done()
  
  This patch ensures that exch_done() gets called if an fcst
  callback returns SCST_TGT_RES_FATAL_ERROR.
........
  r5607 | bvassche | 2014-06-14 20:18:34 +0300 (Sat, 14 Jun 2014) | 10 lines
  
  fcst: Handle frame send failures properly
  
  Retry sending XFER_RDY, data and response frames if the network
  driver reports that sending failed (-ENOMEM) instead of reporting
  a kernel warning (WARN_ON(1)). If sending XFER_RDY or data frames
  failed for another reason, report this to the initiator as a
  write error (ASC = 03; ASCQ = 00 which stands for PERIPHERAL
  DEVICE WRITE FAULT). If sending a response frame failed with
  another error code than -ENOMEM, do not send a response.
........
  r5608 | vlnb | 2014-06-17 03:50:46 +0300 (Tue, 17 Jun 2014) | 10 lines
  
  scst: Make access control group removal behavior configurable
  
  SCST rejects removal of an access control group with one or more
  sessions with error code -EBUSY. Make it easy to change this
  behavior into forcibly closing sessions when an access control
  group is removed.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5609 | bvassche | 2014-06-17 09:37:08 +0300 (Tue, 17 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5610 | vlnb | 2014-06-19 06:51:48 +0300 (Thu, 19 Jun 2014) | 3 lines
  
  Update for 3.15 kernels
........
  r5611 | bvassche | 2014-06-19 10:09:53 +0300 (Thu, 19 Jun 2014) | 1 line
  
  nightly build: Add kernel 3.15 build infrastructure
........
  r5612 | bvassche | 2014-06-19 15:48:25 +0300 (Thu, 19 Jun 2014) | 1 line
  
  kernel module installation: Skip "depmod" when building an RPM
........
  r5613 | vlnb | 2014-06-20 07:00:41 +0300 (Fri, 20 Jun 2014) | 8 lines
  
  scst: Convert a loop to keep smatch happy
  
  Avoid that smatch reports the following warning:
  scst_init_session() info: loop could be replaced with if statement.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5614 | vlnb | 2014-06-20 07:02:00 +0300 (Fri, 20 Jun 2014) | 13 lines
  
  iscsi-scst: Suppress a compiler warning
  
  Avoid that the following compiler warning is reported when compiling
  iscsi-scst:
  
  chap.c: In function 'chap_rand':
  chap.c:348:5: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
       (void)read(fd, &r, sizeof(r));
       ^
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5615 | vlnb | 2014-06-20 07:03:40 +0300 (Fri, 20 Jun 2014) | 5 lines
  
  scst, iscsi-scst: Fix RHEL 5 compilation warnings
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5616 | vlnb | 2014-06-20 07:05:11 +0300 (Fri, 20 Jun 2014) | 10 lines
  
  scst: Exclude certain locking code from static analysis
  
  Loops with locking statements and also lock and unlock
  statements guarded by an if-statement trigger false positive
  warnings when analyzing the SCST code with smatch and/or sparse.
  Hence exclude such code from static analysis.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5617 | vlnb | 2014-06-20 07:09:11 +0300 (Fri, 20 Jun 2014) | 10 lines
  
  scst: Avoid that sparse complains about unreachable code
  
  Remove the code after BUG() statements to avoid that smatch
  complains about unreachable code. Hide the spin_unlock() statements
  before BUG() statements for static analysis tools to avoid that
  sparse complains about locking imbalances.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5618 | vlnb | 2014-06-20 07:10:40 +0300 (Fri, 20 Jun 2014) | 12 lines
  
  Change BUG_ON(1) into BUG()
  
  With CONFIG_BUG=y both BUG() and BUG_ON(1) halt the system. However,
  with CONFIG_BUG=n BUG() halts the system but BUG_ON(1) not. To avoid
  such subtleties, change BUG_ON(1) into BUG().
  
  See also patch Josh Triplett, "bug: Make BUG() always stop the machine",
  7 April 2014 (commit ID a4b5d580e07875f9be29f62a57c67fbbdbb40ba2).
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5619 | bvassche | 2014-06-20 08:56:36 +0300 (Fri, 20 Jun 2014) | 1 line
  
  nightly build: Add kernel version 3.15.1
........
  r5620 | vlnb | 2014-06-24 07:45:08 +0300 (Tue, 24 Jun 2014) | 9 lines
  
  scst_vdisk: Split vdisk_exec_inquiry()
  
  Make vdisk_exec_inquiry() easier to read by moving the code
  for the implementation of each VPD page into a separate function.
  This patch does not change any functionality.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5621 | bvassche | 2014-06-24 16:32:18 +0300 (Tue, 24 Jun 2014) | 1 line
  
  ib_srpt: Complain if another ib_srpt.ko kernel module already exists
........
  r5622 | bvassche | 2014-06-24 16:33:23 +0300 (Tue, 24 Jun 2014) | 2 lines
  
  ib_srpt: Set SCSI residual fields in SRP_CMD reply
........
  r5624 | bvassche | 2014-06-25 14:50:40 +0300 (Wed, 25 Jun 2014) | 1 line
  
  nightly build: Use http instead of ftp for downloading kernel source code
........
  r5625 | vlnb | 2014-06-26 00:38:19 +0300 (Thu, 26 Jun 2014) | 5 lines
  
  scst_debug.h: Make EXTRACHECKS_*_ON() statements visible to Coverity
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5626 | vlnb | 2014-06-27 02:26:25 +0300 (Fri, 27 Jun 2014) | 10 lines
  
  scst_vdisk: Three more put_unaligned_*() conversions
  
  Convert three more *(__be16 *)p = cpu_to_be16(v) statements into
  put_unaligned_be16(v, p) since the latter is easier to read. Also
  convert one "cmd->dev" into "dev" expression. This patch does not
  change any functionality.
  
  Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
  r5627 | bvassche | 2014-06-27 13:32:02 +0300 (Fri, 27 Jun 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5628 | bvassche | 2014-06-28 22:56:36 +0300 (Sat, 28 Jun 2014) | 1 line
  
  ib_srpt: Remove existing ib_srpt.ko kernel modules before installation
........
  r5629 | bvassche | 2014-06-28 22:58:44 +0300 (Sat, 28 Jun 2014) | 6 lines
  
  scst_vdisk: Fix 32-bit build
  
  Avoid 64-bit modulo computations since these result in undefined symbol
  errors on 32-bit systems (__moddi3 / __umoddi3). Support sizes >= 2**32
  bytes on 32-bit systems.
........
  r5630 | bvassche | 2014-06-28 23:00:22 +0300 (Sat, 28 Jun 2014) | 1 line
  
  scst.spec.in: Follow-up for r5628
........
  r5631 | bvassche | 2014-06-28 23:15:45 +0300 (Sat, 28 Jun 2014) | 1 line
  
  scst_local: Avoid that session deletion triggers a kernel warning
........
  r5647 | bvassche | 2014-06-30 10:18:53 +0300 (Mon, 30 Jun 2014) | 1 line
  
  scst: Build fix for Linux kernel versions 2.6.33 and 2.6.34
........
  r5648 | bvassche | 2014-06-30 10:28:18 +0300 (Mon, 30 Jun 2014) | 1 line
  
  scst: Build fix for kernel versions <= 2.6.31
........
  r5649 | bvassche | 2014-06-30 11:40:23 +0300 (Mon, 30 Jun 2014) | 6 lines
  
  scst_vdisk: Fix a checkpatch warning
  
  Address the following checkpatch warning:
  
  char * array declaration might be better as static const
........
  r5650 | bvassche | 2014-06-30 11:52:06 +0300 (Mon, 30 Jun 2014) | 1 line
  
  nightly build: Correct a kernel version
........
  r5651 | bvassche | 2014-06-30 12:18:41 +0300 (Mon, 30 Jun 2014) | 1 line
  
  nightly build: Correct a kernel version
........
  r5654 | bvassche | 2014-07-01 09:38:13 +0300 (Tue, 01 Jul 2014) | 6 lines
  
  scst_vdisk: Fix a checkpatch warning
  
  Avoid that checkpatch reports the following warning:
  
  WARNING: static const char * array should probably be static const char * const
........
  r5657 | bvassche | 2014-07-01 19:46:12 +0300 (Tue, 01 Jul 2014) | 1 line
  
  nightly build: Update kernel versions
........
  r5658 | bvassche | 2014-07-03 11:36:48 +0300 (Thu, 03 Jul 2014) | 1 line
  
  scripts/kernel-functions: Handle 3.x.0 kernel versions correctly
........
  r5659 | bvassche | 2014-07-03 11:42:08 +0300 (Thu, 03 Jul 2014) | 1 line
  
  scripts/generate-patched-kernel: Clean up
........
  r5661 | bvassche | 2014-07-04 08:39:28 +0300 (Fri, 04 Jul 2014) | 1 line
  
  Make scripts/kernel-functions again compatible with 2.6.x kernels
........
  r5662 | bvassche | 2014-07-06 11:02:28 +0300 (Sun, 06 Jul 2014) | 1 line
  
  scripts/run-regression-tests: Add command-line option -4 (disable IPv6)
........


git-svn-id: http://svn.code.sf.net/p/scst/svn/branches/iser@5666 d57e44dd-8a1f-0410-8b47-8ef2f437770f
2014-07-07 10:36:05 +00:00

478 lines
16 KiB
Makefile

#
# Common makefile for SCSI target mid-level and its drivers
#
# Copyright (C) 2004 - 2014 Vladislav Bolkhovitin <vst@vlnb.net>
# Copyright (C) 2007 - 2014 Fusion-io, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, version 2
# of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
#
SHELL = /bin/bash
# Define the location to the kernel src. Can be defined here or on
# the command line during the build process. If KDIR is defined,
# we will determine an appropriate value for KVER from the kernel
# source tree. KVER can still be overridden by the user via the
# command line or by defining it in this Makefile. If KDIR and KVER
# are not defined by the user, the current running kernel version is
# used to define KVER.
#export KDIR=/usr/src/linux-2.6
#export KVER=2.6.x
ifdef KDIR
ifndef KVER
export KVER = $(strip $(shell \
cat $(KDIR)/include/config/kernel.release 2>/dev/null || \
make -s -C $(KDIR) kernelversion))
endif
endif
SCST_DIR=scst
DOC_DIR=doc
SCSTADM_DIR=scstadmin
QLA_INI_DIR=qla2x00t
QLA_DIR=qla2x00t/qla2x00-target
QLA_ISP_DIR=qla_isp
LSI_DIR=mpt
USR_DIR=usr/fileio
SRP_DIR=srpt
SCST_LOCAL_DIR=scst_local
MVSAS_DIR=mvsas_tgt
FCST_DIR=fcst
ISCSI_DIR=iscsi-scst
VERSION = $(shell echo -n "$$(sed -n 's/^\#define[[:blank:]]SCST_VERSION_NAME[[:blank:]]*\"\([^-]*\).*\"/\1/p' scst/include/scst_const.h)."; \
if svn info >/dev/null 2>&1; \
then svn info | sed -n 's/^Revision:[[:blank:]]*/r/p';\
else git show | sed -n 's/^commit[[:blank:]]*\(.......\).*/\1/p'; \
fi)
help:
@echo " all : make all"
@echo " clean : clean files"
@echo " extraclean : clean + clean dependencies"
@echo " install : install"
@echo " uninstall : uninstall"
@echo ""
@echo " scst : make scst only"
@echo " scst_clean : scst: clean "
@echo " scst_extraclean : scst: clean + clean dependencies"
@echo " scst_install : scst: install"
@echo " scst_uninstall : scst: uninstall"
@echo ""
@echo " scstadm_install : scstadmin: install"
@echo " scstadm_uninstall : scstadmin: uninstall"
@echo ""
@echo " qla : make QLA target driver"
@echo " qla_clean : 2.6 qla target: clean "
@echo " qla_extraclean : 2.6 qla target: clean + clean dependencies"
@echo " qla_install : 2.6 qla target: install"
@echo " qla_uninstall : 2.6 qla target: uninstall"
@echo ""
@echo " qla_isp : make ISP Qlogic chipsets target driver"
@echo " qla_isp_clean : qla ISP target: clean "
@echo " qla_isp_extraclean: qla ISP target: clean + clean dependencies"
@echo " qla_isp_install : qla ISP target: install"
@echo " qla_isp_uninstall : qla ISP target: uninstall"
@echo ""
@echo " iscsi : make iSCSI target"
@echo " iscsi_clean : ISCSI target: clean "
@echo " iscsi_extraclean : ISCSI target: clean + clean dependencies"
@echo " iscsi_install : ISCSI target: install"
@echo " iscsi_uninstall : ISCSI target: uninstall"
@echo ""
@echo " lsi : make LSI MPT target"
@echo " lsi_clean : lsi target: clean "
@echo " lsi_extraclean : lsi target: clean + clean dependencies"
@echo " lsi_install : lsi target: install"
@echo " lsi_uninstall : lsi target: uninstall"
@echo ""
@echo " srpt : make SRP target"
@echo " srpt_clean : srp target: clean "
@echo " srpt_extraclean : srp target: clean + clean dependencies"
@echo " srpt_install : srp target: install"
@echo " srpt_uninstall : srp target: uninstall"
@echo ""
@echo " mvsas : make MVSAS target"
@echo " mvsas_clean : mvsas target: clean "
@echo " mvsas_extraclean : mvsas target: clean + clean dependencies"
@echo " mvsas_install : mvsas target: install"
@echo " mvsas_uninstall : mvsas target: uninstall"
@echo ""
@echo " fcst : make FCoE target"
@echo " fcst_clean : FCoE target: clean "
@echo " fcst_extraclean : FCoE target: clean + clean dependencies"
@echo " fcst_install : FCoE target: install"
@echo " fcst_uninstall : FCoE target: uninstall"
@echo ""
@echo " scst_local : make scst_local target"
@echo " scst_local_install : scst_local target: install"
@echo " scst_local_uninstall : scst_local target: uninstall"
@echo ""
@echo " usr : make user space fileio_tgt target"
@echo " usr_clean : usr target: clean "
@echo " usr_extraclean : usr target: clean + clean dependencies"
@echo " usr_install : usr target: install"
@echo " usr_uninstall : usr target: uninstall"
@echo ""
@echo " enable_proc : switch to procfs interface"
@echo " disable_proc : switch to sysfs interface (default)"
@echo ""
@echo " 2perf : changes debug state to full performance"
@echo " 2release : changes debug state to release"
@echo " 2debug : changes debug state to full debug"
@echo ""
@echo " Note:"
@echo " - install and uninstall may need root privileges"
all:
cd $(SCST_DIR) && $(MAKE) $@
# @if [ -d $(DOC_DIR) ]; then cd $(DOC_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# @if [ -d $(QLA_ISP_DIR) ]; then cd $(QLA_ISP_DIR) && $(MAKE) $@; fi
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
install:
cd $(SCST_DIR) && $(MAKE) $@
# @if [ -d $(DOC_DIR) ]; then cd $(DOC_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# @if [ -d $(QLA_ISP_DIR) ]; then cd $(QLA_ISP_DIR) && $(MAKE) $@; fi
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
uninstall:
cd $(SCST_DIR) && $(MAKE) $@
# @if [ -d $(DOC_DIR) ]; then cd $(DOC_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# @if [ -d $(QLA_ISP_DIR) ]; then cd $(QLA_ISP_DIR) && $(MAKE) $@; fi
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
clean:
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(DOC_DIR) ]; then cd $(DOC_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_INI_DIR) ]; then cd $(QLA_INI_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# @if [ -d $(QLA_ISP_DIR) ]; then cd $(QLA_ISP_DIR) && $(MAKE) $@; fi
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
extraclean:
-rm -f TAGS
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(DOC_DIR) ]; then cd $(DOC_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_INI_DIR) ]; then cd $(QLA_INI_DIR) && $(MAKE) $@; fi
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# @if [ -d $(QLA_ISP_DIR) ]; then cd $(QLA_ISP_DIR) && $(MAKE) $@; fi
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
tags:
find . -type f -name "*.[ch]" | ctags --c-kinds=+p --fields=+iaS --extra=+q -e -L-
scst:
cd $(SCST_DIR) && $(MAKE) all
scst_install:
cd $(SCST_DIR) && $(MAKE) install
scst_uninstall:
cd $(SCST_DIR) && $(MAKE) uninstall
scst_clean:
cd $(SCST_DIR) && $(MAKE) clean
scst_extraclean:
cd $(SCST_DIR) && $(MAKE) extraclean
docs:
cd $(DOC_DIR) && $(MAKE) all
docs_clean:
cd $(DOC_DIR) && $(MAKE) clean
docs_extraclean:
cd $(DOC_DIR) && $(MAKE) extraclean
scstadm:
cd $(SCSTADM_DIR) && $(MAKE) all
scstadm_install:
cd $(SCSTADM_DIR) && $(MAKE) install
scstadm_uninstall:
cd $(SCSTADM_DIR) && $(MAKE) uninstall
scstadm_clean:
cd $(SCSTADM_DIR) && $(MAKE) clean
scstadm_extraclean:
cd $(SCSTADM_DIR) && $(MAKE) extraclean
qla:
cd $(QLA_DIR) && $(MAKE) all
qla_install:
cd $(QLA_DIR) && $(MAKE) install
qla_uninstall:
cd $(QLA_DIR) && $(MAKE) uninstall
qla_clean:
cd $(QLA_INI_DIR) && $(MAKE) clean
cd $(QLA_DIR) && $(MAKE) clean
qla_extraclean:
cd $(QLA_INI_DIR)/.. && $(MAKE) extraclean
cd $(QLA_DIR) && $(MAKE) extraclean
qla_isp:
cd $(QLA_ISP_DIR) && $(MAKE) all
qla_isp_install:
cd $(QLA_ISP_DIR) && $(MAKE) install
qla_isp_uninstall:
cd $(QLA_ISP_DIR) && $(MAKE) uninstall
qla_isp_clean:
cd $(QLA_ISP_DIR) && $(MAKE) clean
qla_isp_extraclean:
cd $(QLA_ISP_DIR) && $(MAKE) extraclean
iscsi:
cd $(ISCSI_DIR) && $(MAKE) all
iscsi_install:
cd $(ISCSI_DIR) && $(MAKE) install
iscsi_uninstall:
cd $(ISCSI_DIR) && $(MAKE) uninstall
iscsi_clean:
cd $(ISCSI_DIR) && $(MAKE) clean
iscsi_extraclean:
cd $(ISCSI_DIR) && $(MAKE) extraclean
lsi:
cd $(LSI_DIR) && $(MAKE) all
lsi_install:
cd $(LSI_DIR) && $(MAKE) install
lsi_uninstall:
cd $(LSI_DIR) && $(MAKE) uninstall
lsi_clean:
cd $(LSI_DIR) && $(MAKE) clean
lsi_extraclean:
cd $(LSI_DIR) && $(MAKE) extraclean
srpt:
cd $(SRP_DIR) && $(MAKE) all
srpt_install:
cd $(SRP_DIR) && $(MAKE) install
srpt_uninstall:
cd $(SRP_DIR) && $(MAKE) uninstall
srpt_clean:
cd $(SRP_DIR) && $(MAKE) clean
srpt_extraclean:
cd $(SRP_DIR) && $(MAKE) extraclean
scst_local:
cd $(SCST_LOCAL_DIR) && $(MAKE) all
scst_local_install:
cd $(SCST_LOCAL_DIR) && $(MAKE) install
scst_local_uninstall:
cd $(SCST_LOCAL_DIR) && $(MAKE) uninstall
scst_local_clean:
cd $(SCST_LOCAL_DIR) && $(MAKE) clean
scst_local_extraclean:
cd $(SCST_LOCAL_DIR) && $(MAKE) extraclean
usr:
cd $(USR_DIR) && $(MAKE)
usr_install:
cd $(USR_DIR) && $(MAKE) install
usr_uninstall:
cd $(USR_DIR) && $(MAKE) uninstall
usr_clean:
cd $(USR_DIR) && $(MAKE) clean
usr_extraclean:
cd $(USR_DIR) && $(MAKE) extraclean
mvsas:
cd $(MVSAS_DIR) && $(MAKE) all
mvsas_install:
cd $(MVSAS_DIR) && $(MAKE) install
mvsas_uninstall:
cd $(MVSAS_DIR) && $(MAKE) uninstall
mvsas_clean:
cd $(MVSAS_DIR) && $(MAKE) clean
mvsas_extraclean:
cd $(MVSAS_DIR) && $(MAKE) extraclean
fcst:
cd $(FCST_DIR) && $(MAKE) all
fcst_install:
cd $(FCST_DIR) && $(MAKE) install
fcst_uninstall:
cd $(FCST_DIR) && $(MAKE) uninstall
fcst_clean:
cd $(FCST_DIR) && $(MAKE) clean
fcst_extraclean:
cd $(FCST_DIR) && $(MAKE) extraclean
scst-dist-gzip:
name=scst && \
mkdir $${name}-$(VERSION) && \
{ scripts/list-source-files | \
grep -E '^doc/|^fcst/|^iscsi-scst/|^Makefile|^qla2x00t/|^scst.spec|^scst/|^scst_local/|^srpt/'|\
tar -T- -cf- | \
tar -C $${name}-$(VERSION) -xf-; } && \
rm -f $${name}-$(VERSION).tar.bz2 && \
tar -cjf $${name}-$(VERSION).tar.bz2 $${name}-$(VERSION) && \
rm -rf $${name}-$(VERSION)
scst-rpm:
name=scst && \
rpmtopdir="$$(if [ $$(id -u) = 0 ]; then echo /usr/src/packages;\
else echo $$PWD/rpmbuilddir; fi)" && \
$(MAKE) scst-dist-gzip && \
for d in BUILD RPMS SOURCES SPECS SRPMS; do \
mkdir -p $${rpmtopdir}/$$d; \
done && \
cp $${name}-$(VERSION).tar.bz2 $${rpmtopdir}/SOURCES && \
sed "s/@rpm_version@/$(VERSION)/g" \
<$${name}.spec.in >$${name}.spec; \
MAKE="$(MAKE)" \
rpmbuild --define="%_topdir $${rpmtopdir}" -ba $${name}.spec && \
rm -f $${name}-$(VERSION).tar.bz2
rpm:
$(MAKE) scst-rpm
$(MAKE) -C scstadmin rpm
@if [ "$$(id -u)" != 0 ]; then \
echo; \
echo "The following RPMs have been built:"; \
find -name '*.rpm'; \
fi
2perf: extraclean
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# patch -p0 <qla_isp-release.patch
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
@if [ -d $(FCST_DIR) ]; then cd $(FCST_DIR) && $(MAKE) $@; fi
2release: extraclean
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# patch -p0 <qla_isp-release.patch
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
@if [ -d $(FCST_DIR) ]; then cd $(FCST_DIR) && $(MAKE) $@; fi
2debug: extraclean
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# patch -p0 -R <qla_isp-release.patch
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
@if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
@if [ -d $(USR_DIR) ]; then cd $(USR_DIR) && $(MAKE) $@; fi
@if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
@if [ -d $(FCST_DIR) ]; then cd $(FCST_DIR) && $(MAKE) $@; fi
enable_proc: extraclean
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# patch -p0 -R <qla_isp-release.patch
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
@if [ -d $(SCSTADM_DIR) ]; then cd $(SCSTADM_DIR) && $(MAKE) $@; fi
disable_proc: extraclean
cd $(SCST_DIR) && $(MAKE) $@
@if [ -d $(QLA_DIR) ]; then cd $(QLA_DIR) && $(MAKE) $@; fi
# patch -p0 -R <qla_isp-release.patch
# @if [ -d $(LSI_DIR) ]; then cd $(LSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SRP_DIR) ]; then cd $(SRP_DIR) && $(MAKE) $@; fi
@if [ -d $(ISCSI_DIR) ]; then cd $(ISCSI_DIR) && $(MAKE) $@; fi
# @if [ -d $(SCST_LOCAL_DIR) ]; then cd $(SCST_LOCAL_DIR) && $(MAKE) $@; fi
@if [ -d $(SCSTADM_DIR) ]; then cd $(SCSTADM_DIR) && $(MAKE) $@; fi
.PHONY: all install uninstall clean extraclean tags help \
qla qla_install qla_uninstall qla_clean qla_extraclean \
qla_isp qla_isp_install qla_isp_uninstall qla_isp_clean qla_isp_extraclean \
lsi lsi_install lsi_uninstall lsi_clean lsi_extraclean \
iscsi iscsi_install iscsi_uninstall iscsi_clean iscsi_extraclean \
scst scst_install scst_uninstall scst_clean scst_extraclean \
docs docs_clean docs_extraclean \
scstadm scstadm_install scstadm_uninstall scstadm_clean scstadm_extraclean \
srpt srpt_install srpt_uninstall srpt_clean srpt_extraclean \
usr usr_install usr_uninstall usr_clean usr_extraclean \
scst_local scst_local_install scst_local_uninstall scst_local_clean scst_local_extraclean \
mvsas mvsas_install mvsas_uninstall mvsas_clean mvsas_extraclean \
fcst fcst_install fcst_uninstall fcst_clean fcst_extraclean \
2perf 2release 2debug enable_proc disable_proc