scst/scstadmin/init.d/scst

#!/bin/sh
#
# A script that generates the /etc/init.d/scst script. On systems that support
# the LSB an LSB compliant init script is generated. On Gentoo systems a Gentoo
# init script is generated. And on Slackware the LSB init script is used with
# replacements for the used LSB functions.

if [ -e /etc/gentoo-release ]; then
  echo "#!/sbin/runscript"
else
  echo "#!/bin/sh"
fi

cat <<"EOF"
#
# Copyright (C) 2008 Mark Buechler <mark.buechler@gmail.com>
# Copyright (C) 2009-2011 Bart Van Assche <bvanassche@acm.org>
# This software is made available under the GPLv2 license.
#
# System startup script for SCST.
#
# See also:
# * http://refspecs.freestandards.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html
# * http://www.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html
#
EOF

if [ ! -e /etc/gentoo-release ]; then
cat <<"EOF"
### BEGIN INIT INFO
# Provides:       scst
# Required-Start: $syslog $local_fs $network
# Required-Stop:  $syslog $local_fs $network
# Default-Start:  3 5
# Default-Stop:   0 1 2 4 6
# Description:    SCST - A Generic SCSI Target Subsystem
### END INIT INFO
### BEGIN CHKCONFIG INFO
# chkconfig:      2345 13 87
# description:    SCST - A Generic SCSI Target Subsystem
### END CHKCONFIG INFO

# Return values according to LSB for all commands except status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
#

if [ -e /lib/lsb/init-functions ]; then
    # Debian, RHEL, Fedora, SLES and openSUSE.
    SYSTEMD_NO_WRAP="true"
    _SYSTEMCTL_SKIP_REDIRECT=1
    . /lib/lsb/init-functions
else
    # Slackware (Gentoo has these functions).
log_success_msg() {
    echo "$@"
}
log_failure_msg() {
    echo "$@"
}
fi

PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin
SCST_DFLT=/etc/default/scst

if [ -f $SCST_DFLT ]; then
    . $SCST_DFLT
fi
EOF
fi

cat <<"EOF"

SCST_CFG=/etc/scst.conf

show_status() {
  _rc_status_ret=$?
  for i; do
    case "$i" in
      -v)
        case "${_rc_status_ret}" in
          0) echo "OK";;
          *) echo "Not running";;
        esac
        ;;
    esac
  done
  return ${_rc_status_ret}
}

if [ ! -e /lib/lsb/init-functions ]; then
    # Slackware and Gentoo.
start_daemon() {
    "$@" >/dev/null 2>&1 &
}
killproc() {
    exe=$(basename "$1")
    killall "$exe"
    rm -f "/run/$exe.pid"
}
fi

# Whether or not there is a "TARGET_DRIVER iscsi" section in scst.conf.
using_iscsi() {
    for m in $SCST_MODULES; do
        if [ "$m" = "iscsi_scst" ]; then
            return 0
        fi
    done
    return 1
}

# Parse scst.conf and assign the list of associated kernel modules to
# SCST_MODULES.
parse_scst_conf() {
    SCST_MODULES="scst"
    SCST_OPT_MODULES=""
    SCST_DAEMONS=""
    if [ ! -e $SCST_CFG ]; then
        return 0
    fi
    nonblanks="[^[:blank:]]\{1,\}"
    blanks="[[:blank:]]\{1,\}"
    optblanks="[[:blank:]]*"
    SCST_MODULES="$SCST_MODULES $(sed -n -e "s/^HANDLER$blanks\($nonblanks\)$blanks{$optblanks\$/\1/p" \
                    -e "s/^\[HANDLER$blanks\($nonblanks\)\]\$/\1/p" $SCST_CFG \
        | while read -r h; do
            case "$h" in
                dev_cdrom)      echo scst_cdrom;;
                dev_changer)    echo scst_changer;;
                dev_disk*)      echo scst_disk;;
                dev_modisk*)    echo scst_modisk;;
                dev_processor)  echo scst_processor;;
                dev_raid)       echo scst_raid;;
                dev_tape*)      echo scst_tape;;
                dev_user)       echo scst_user;;
                vdisk*|vcdrom)  echo scst_vdisk;;
                *)              echo "$h";;
            esac
        done | sort -u) \
        $(sed -n "s/^TARGET_DRIVER$blanks\($nonblanks\)$blanks{$optblanks\$/\1/p" $SCST_CFG | while read -r d; do
            case "$d" in
                iscsi)    echo iscsi_scst;;
                qla2x00t) echo qla2x00tgt;;
                copy_manager) ;;
                *)        echo "$d";;
            esac
        done | sort -u) \
        $SCST_TARGET_MODULES"
    if using_iscsi; then
        case "$(uname -m)" in
            x86_64|i686)
                SCST_OPT_MODULES="crc32c-intel $SCST_OPT_MODULES";;
        esac
        SCST_OPT_MODULES="crc32c isert_scst $SCST_OPT_MODULES"
        SCST_DAEMONS="$(which iscsi-scstd) $SCST_DAEMONS"
    fi
}

# Keep trying to unload kernel module $1 for up to $2 seconds. Return true
# if and only if the kernel module was unloaded before the timeout expired.
unload_kmod() {
    m="$1"
    t="$2"
    i=0
    while [ -e "/sys/module/$m/refcnt" ] && ! modprobe -r "$m" 2>/dev/null &&
          [ $i -lt "$t" ]
    do
        sleep 1
        i=$((i+1))
    done
    [ ! -e "/sys/module/$m/refcnt" ]
}

# Unload SCST. parse_scst_conf must already have been invoked.
unload_scst() {
    for d in $SCST_DAEMONS; do
        killproc "$d"
    done

    # isert_scst must be unloaded before iscsi_scst. Note that unloading
    # isert_scst may take a while since in certain scenarios (e.g. cable
    # problem and then service stop) MADs get timed out only after about 50+
    # seconds.
    unload_kmod isert_scst 90 || echo "Unloading isert_scst failed"

    for m in isert_scst iscsi_scst fcst ib_srpt qla2x00tgt qla2xxx_scst \
	     scst_local scst_disk scst_raid scst_tape scst_user scst_changer \
	     scst_cdrom scst_vdisk scst_modisk scst_processor scst; do
	unload_kmod "$m" 30
    done
    reverse_list=""
    for m in $SCST_MODULES; do
        reverse_list="$m $reverse_list"
    done
    for m in $reverse_list; do
        unload_kmod "$m" 30 || return 1
    done

    # Clear the config in case unloading failed or SCST has been built into the
    # kernel
    if [ -e /sys/module/scst ]; then
        scstadmin -noprompt -force -clear_config >/dev/null 2>&1
    fi

    return 0
}

start_scst() {
        if [ -e /sys/module/scst ] && [ -e /sys/module/scst/refcnt ]; then
            echo Already started
            return 0
        fi

        parse_scst_conf

        for m in $SCST_OPT_MODULES; do
            modprobe "$m" >/dev/null 2>&1
        done

        for m in $SCST_MODULES; do
            if [ ! -e "/sys/module/$m" ]; then
                if ! modprobe "$m"; then
                    echo "modprobe $m failed."
                    unload_scst
                    return 5
                fi
            fi
        done

        for d in $SCST_DAEMONS; do
            options=""
            if [ "$(basename "$d")" = "iscsi-scstd" ]; then
                options=${ISCSID_OPTIONS}
            fi
            if ! start_daemon "$d" $options; then
                echo "Starting $d failed"
                unload_scst
                return 1
            fi
        done

        if [ -f $SCST_CFG ]; then
            scstadmin -force -noprompt -clear_config >/dev/null 2>&1
            tmpout=/tmp/scstadmin-output-$$
            if scstadmin -config $SCST_CFG >$tmpout 2>&1; then
                rm -f $tmpout
                return 0
            else
                cat $tmpout
                rm -f $tmpout
                unload_scst
                return 1
            fi
        else
            echo "SCST configuration file $SCST_CFG missing"
	    return 0
        fi
}

stop_scst() {
        if ! parse_scst_conf; then
            return 1
        fi

        unload_scst
}

scst_status() {
        # Status has a slightly different meaning for the status command:
        # 0 - service running
        # 1 - service dead, but /run/  pid  file exists
        # 2 - service dead, but /run/lock/ lock file exists
        # 3 - service not running

        parse_scst_conf

        for m in $SCST_MODULES; do
            if [ ! -e "/sys/module/$m" ]; then
                echo "$m: not loaded"
                return 3
            fi
        done

        for d in $SCST_DAEMONS; do
            daemon_name=$(basename "${d}")
            if ! pgrep "${daemon_name}" > /dev/null 2>&1; then
                echo "${daemon_name}: not running"
                return 3
            fi
        done
	return 0
}

EOF

if [ ! -e /etc/gentoo-release ]; then
cat <<"EOF"
rc=0
case "$1" in
    start)
        ## Start the service.
        echo -n "Loading and configuring SCST"
        start_scst
	rc=$?
        ;;
    stop)
        ## Stop the service.
        echo -n "Stopping SCST"
        stop_scst
	rc=$?
        ;;
    restart)
        ## Stop and restart the service if the service is already running,
        ## otherwise start the service.
        echo -n "Restarting SCST"
        stop_scst && start_scst
	rc=$?
        ;;
    try-restart)
        ## Restart the service if the service is already running.
        echo -n "Trying to restart SCST"
        scst_status >/dev/null 2>&1 && stop_scst && start_scst
	rc=$?
        ;;
    reload)
        ## Cause the configuration of the service to be reloaded without
        ## actually stopping and restarting the service.
        echo -n "Reloading SCST configuration"
        if scstadmin -config $SCST_CFG >/dev/null 2>&1; then
	    rc=0
	else
	    rc=1
	fi
        ;;
    force-reload)
        ## Cause the configuration to be reloaded if the service supports this,
        ## otherwise restart the service if it is running.
        echo -n "Reloading SCST configuration"
        if scstadmin -config $SCST_CFG >/dev/null 2>&1; then
            rc=0
        else
            stop_scst && start_scst
	    rc=$?
        fi
        ;;
    status)
        ## Print the current status of the service.
        echo -n "SCST status: "
        scst_status >/dev/null 2>&1
        show_status -v
        exit $?
        ;;
    *)
        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
        exit 2
        ;;
esac

if [ $rc = 0 ]; then
    log_success_msg ""
else
    log_failure_msg ""
fi

exit $rc
EOF
else
cat <<"EOF"
depend() {
    need localmount
    need net
}

checkconfig() {
     true
}

start() {
    ebegin "Starting SCST"
    start_scst
    eend $?
}

stop() {
    ebegin "Stopping SCST"
    stop_scst
    eend $?
}
EOF
fi