Replace boost::accumulate() calls with std::ranges facilities. This
change reduces external dependencies and modernizes the codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23062
This makes decisions made by the scheduler consistent with decisions
made on table creation, with regard to tablet count.
We want to avoid over-allocation of tablets when table is created,
which would then be reduced by the scheduler's scaling logic. Not just
to avoid wasteful migrations post table creation, but to respect the
per-shard goal. To respect the per-shard goal, the algorithm will no
longer be as simple as looking at hints, and we want to share the
algorithm between the scheduler and initial tablet allocator. So
invoke the scheduler to get the tablet count when table is created.
The existing test measures latencies of object GET-s. That's nice (though incomplete), but we want to measure upload performance. Here it is.
refs: #22460Closesscylladb/scylladb#22480
* github.com:scylladb/scylladb:
test/perf/s3: Add --part-size-mb option for upload test
test/perf/s3: Add uploading test
test/perf/s3: Some renames not to be download-centric
test/perf/s3: Make object/file name configurable
test/perf/s3: Configure maximum number of sockets
test/perf/s3: Remove parallelizm
s3/client: Make http client connections limit configurable
This commit eliminates unused boost header includes from the tree.
Removing these unnecessary includes reduces dependencies on the
external Boost.Adapters library, leading to faster compile times
and a slightly cleaner codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22857
Test now uses default internal part size, but for performance
comparisons its good to make it configurable.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test picks up a file and uploads it into the bucket, then prints the
time it took and uploading speed. For now it's enough, with existing S3
latencies more timing details can be obtained by turning on trace
logging on s3 logger.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now this test is all about reading objects. Rename some bits in it so
that they can be re-used by future uploading test as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now the download test first creates a temporary object and then reads
data from it. It's good to have an option to download pre-existing file.
This option will also be used for uploading test (next patches)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Add the --sockets NR option that limits the number of sockets the
underlying http client is configured to have.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test spawns several fibers that read the same file in parallel.
There's not much point in it, just makes the code harder to maintain.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This series extends the table schema with per-table tablet options.
The options are used as hints for initial tablet allocation on table creation and later for resize (split or merge) decisions,
when the table size changes.
* New feature, no backport required
Closesscylladb/scylladb#22090
* github.com:scylladb/scylladb:
tablets: resize_decision: get rid of initial_decision
tablet_allocator: consider tablet options for resize decision
tablet_allocator: load_balancer: table_size_desc: keep target_tablet_size as member
network_topology_strategy: allocate_tablets_for_new_table: consider tablet options
network_topology_strategy: calculate_initial_tablets_from_topology: precalculate shards per dc using for_each_token_owner
network_topology_strategy: calculate_initial_tablets_from_topology: set default rf to 0
cql3: data_dictionary: format keyspace_metadata: print "enabled":true when initial_tablets=0
cql3/create_keyspace_statement: add deprecation warning for initial tablets
test: cqlpy: test_tablets: add tests for per-table tablet options
schema: add per-table tablet options
feature_service: add TABLET_OPTIONS cluster schema feature
This update introduces four types of credential providers:
1. Environment variables
2. Configuration file
3. AWS STS
4. EC2 Metadata service
The first two providers should only be used for testing and local runs. **They must NEVER be used in production.**
The last two providers are intended for use on real EC2 instances:
- **AWS STS**: Preferred method for obtaining temporary credentials using IAM roles.
- **EC2 Metadata Service**: Should be used as a last resort.
Additionally, a simple credentials provider chain is created. It queries each provider sequentially until valid credentials are obtained. If all providers fail, it returns an empty result.
fixes: #21828Closesscylladb/scylladb#21830
* github.com:scylladb/scylladb:
docs: update the `object_storage.md` and `admin.rst`
aws creds: add STS and Instance Metadata service credentials providers
aws creds: add env. and file credentials providers
s3 creds: move credentials out of endpoint config
Use the keyspace initial_tablets for min_tablet_count, if the latter
isn't set, then take the maximum of the option-based tablet counts:
- min_tablet_count
- and expected_data_size_in_gb / target_tablet_size
- min_per_shard_tablet_count (via
calculate_initial_tablets_from_topology)
If none of the hints produce a positive tablet_count,
fall back to calculate_initial_tablets_from_topology * initial_scale.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
This commit entirely removes credentials from the endpoint configuration. It also eliminates all instances of manually retrieving environment credentials. Instead, the construction of file and environment credentials has been moved to their respective providers. Additionally, a new aws_credentials_provider_chain class has been introduced to support chaining of multiple credential providers.
This commit refactors the way AWS credentials are managed in Scylla. Previously, credentials were included in the endpoint configuration. However, since credentials and endpoint configurations serve different purposes and may have different lifetimes, it’s more logical to manage them separately. Moving forward, credentials will be completely removed from the endpoint_config to ensure clear separation of concerns.
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
New feature. No backport is needed.
Closesscylladb/scylladb#21896
* github.com:scylladb/scylladb:
repair: Stop using rpc to update repair time for repairs scheduled by scheduler
repair: Wire repair_time in system.tablets for tombstone gc
test: Disable flush_cache_time for two tablet repair tests
test: Introduce guarantee_repair_time_next_second helper
repair: Return repair time for repair_service::repair_tablet
service: Add tablet_operation.hh
Introduces a comprehensive audit system to track database operations for security
and compliance purposes. This change includes:
Core Components:
- New audit subsystem for logging database operations
- Service level integration for proper resource management
- CQL statement tracking with operation categories
- Login process integration for tenant management
Key Features:
- Configurable audit logging (syslog/table)
- Operation categorization (QUERY/DML/DDL/DCL/AUTH/ADMIN)
- Selective auditing by keyspace/table
- Password sanitization in audit logs
- Service level shares support (1-1000) for workload prioritization
- Proper lifecycle management and cleanup
I ran the dtests for audit (manually enabled) and they pass.
The in-repo tests pass.
Notably, there should be no non-whitespace changes between this and scylla-enterprise
Fixesscylladb/scylla-enterprise#4999Closesscylladb/scylladb#22147
* github.com:scylladb/scylladb:
audit: Add shares support to service level management
audit: Add service level support to CQL login process
audit: Add support to CQL statements
audit: Integrate audit subsystem into Scylla main process
audit: Add documentation for the audit subsystem
audit: Add the audit subsystem
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
Adds core integration of the audit subsystem into Scylla's main process flow. Changes include:
- Import audit subsystem header
- Initialize audit system during server startup using configuration and token metadata
- Start audit system after API server initialization with query processor and memory manager
- Add proper shutdown sequence for audit system using RAII pattern
- Add error handling for audit system initialization failures
The audit system is now properly integrated into Scylla's lifecycle, ensuring:
- Correct initialization order relative to other subsystems
- Proper resource cleanup during shutdown
- Graceful error handling for initialization failures
Replace usages of `boost::algorithm::join()` with `fmt::join()` to improve
performance and reduce dependency on Boost. `fmt::join()` allows direct
formatting of ranges and tuples with custom separators without creating
intermediate strings.
When formatting comma-separated values into another string, fmt::join()
avoids the overhead of temporary string creation that
`boost::algorithm::join()` requires. This change also helps streamline
our dependencies by leveraging the existing fmt library instead of
Boost.Algorithm.
To avoid the ambiguity, some caller sites were updated to call
`seastar::format()` explicitly.
See also
- boost::algorithm::join():
https://www.boost.org/doc/libs/1_87_0/doc/html/string_algo/reference.html#doxygen.join_8hpp
- fmt::join():
https://fmt.dev/11.0/api/#ranges-api
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22082
now that we are allowed to use C++23. we now have the luxury of using
`std::ranges::to`.
in this change, we:
- replace `boost::copy_range` to `std::ranges::to`
- remove unused `#include` of boost headers
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21880
To improve balancing when reading in 1 < CL < ALL
This implementation has a moderate impact on
the function performance in contrast to full
std::shuffle of the vector before stable_sort:ing it
(especially with large number of nodes to sort).
Before:
test iterations median mad min max allocs tasks inst cycles
sort_by_proximity_topology.perf_sort_by_proximity 25541973 39.225ns 0.114ns 38.966ns 39.339ns 0.000 0.000 588.5 116.6
After:
sort_by_proximity_topology.perf_sort_by_proximity 19689561 50.195ns 0.119ns 50.076ns 51.145ns 0.000 0.000 622.5 150.6
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
benchmark sort_by_proximity
Baseline results on my desktop for sorting 3 nodes:
single run iterations: 0
single run duration: 1.000s
number of runs: 5
number of cores: 1
random seed: 20241224
test iterations median mad min max allocs tasks inst cycles
sort_by_proximity_topology.perf_sort_by_proximity 12808773 77.368ns 0.062ns 77.300ns 77.873ns 0.000 0.000 1194.2 231.6
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
now that we are allowed to use C++23. we now have the luxury of using
`std::views::transform`.
in this change, we:
- replace `boost::adaptors::transformed` with `std::views::transform`
- use `fmt::join()` when appropriate where `boost::algorithm::join()`
is not applicable to a range view returned by `std::view::transform`.
- use `std::ranges::fold_left()` to accumulate the range returned by
`std::view::transform`
- use `std::ranges::fold_left()` to get the maximum element in the
range returned by `std::view::transform`
- use `std::ranges::min()` to get the minimal element in the range
returned by `std::view::transform`
- use `std::ranges::equal()` to compare the range views returned
by `std::view::transform`
- remove unused `#include <boost/range/adaptor/transformed.hpp>`
- use `std::ranges::subrange()` instead of `boost::make_iterator_range()`,
to feed `std::views::transform()` a view range.
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
limitations:
there are still a couple places where we are still using
`boost::adaptors::transformed` due to the lack of a C++23 alternative
for `boost::join()` and `boost::adaptors::uniqued`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21700
Modernize the codebase by replacing Boost range adaptors with C++23 standard library views,
reducing external dependencies and leveraging modern C++ language features.
Key Changes:
- Replace `boost::adaptors::filtered` with `std::views::filter`
- Remove `#include <boost/range/adaptor/filtered.hpp>`
- Utilize standard library range views
Motivation:
- Reduce project's external dependency footprint
- Leverage standard library's range and view capabilities
- Improve long-term code maintainability
- Align with modern C++ best practices
Implementation Challenges and Considerations:
1. Range Conversion and Move Semantics
- `std::ranges::to` adaptor requires rvalue references
- Necessitated updates to variable and parameter constness
- Example: `cql3/restrictions/statement_restrictions.cc` modified to remove `const`
from `common` to enable efficient range conversion
2. Range Iteration and Mutation
- Range views may mutate internal state during iteration
- Cannot pass ranges by const reference in some scenarios
- Solution: Pass ranges by rvalue reference to explicitly indicate
state invalidation
Limitations:
- One instance of `boost::adaptors::filtered` temporarily preserved
due to lack of a C++23 alternative for `boost::join()`
- A comprehensive replacement will be addressed in a follow-up change
This change is part of our ongoing effort to modernize the codebase,
reducing external dependencies and adopting modern C++ practices.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21648
The later includes the former and in addition to `seastar::format()`,
`print.hh` also provides helpers like `seastar::fprint()` and
`seastar::print()`, which are deprecated and not used by scylladb.
Previously, we include `seastar/core/print.hh` for using
`seastar::format()`. and in seastar 5b04939e, we extracted
`seastar::format()` into `seastar/core/format.hh`. this allows us
to include a much smaller header.
In this change, we just include `seastar/core/format.hh` in place of
`seastar/core/print.hh`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21574
To reduce the dependency load, replace use of boost ranges
with the std equivalent.
Files that lost the indirect boost dependency have it added as a
direct dependency.
Single-row reads from large partition issue 64 KiB reads to the data file,
which is equal to the default span of the promoted index block in the data file.
If users would want to increase selectivity of the index to speed up single-row reads,
this won't be effective. The reason is that the reader uses promoted index
to look up the start position in the data file of the read, but end position
will in practice extend to the next partition, and amount of I/O will be
determined by the underlying file input stream implementation and its
read-ahead heuristics. By default, that results in at least 2 IOs 32KB each.
There is already infrastructure to lookup end position based on upper
bound of the read, in anticipation for sharing the promoted index cache,
but it's not effective becasue it's a non-populating lookup and the upper
bound cursor has its own private cached_promoted_index, which is cold
when positions are computed. It's non-populating on purpose, to avoid
extra index file IO to read upper bound. In case upper bound is far-enough
from the lower bound, this will only increase the cost of the read.
The solution employed here is to warm up the lower bound cursor's
cache before positions are computed, and use that cursor for
non-populating lookup of the upper bound.
We use the lower bound cursor and the slice's lower bound so that we
read the same blocks as later lower-bound slicing would, so that we
don't incur extra IO for cases where looking up upper bound is not
worth it, that is when upper bound is far from the lower bound. If
upper bound is near lower bound, then warming up using lower bound
will populate cached_promoted_index with blocks which will allow us to
locate the upper bound block accurately. This is especially important
for single-row reads, where the bounds are around the same key. In
this case we want to read the data file range which belongs to a
single promoted index block. It doesn't matter that the upper bound
is not exactly the same. They both will likely lie in the same block,
and if not, binary search will bring adjacent blocks into cache. Even
if upper bound is not near, the binary search will populate the cache
with blocks which can be used to narrow down the data file range
somewhat.
Fixes#10030.
The change was tested with perf-fast-forward.
I populated the data set with `column_index_size_in_kb` set to 1
scylla perf-fast-forward --populate --run-tests=large-partition-slicing --column-index-size-in-kb=1
Test run:
build/release/scylla perf-fast-forward --run-tests=large-partition-select-few-rows -c1 --keep-cache-across-test-cases --test-case-duration=0
This test issues two reads of subsequent keys from the middle of a large partition (1M rows in total). The first read will miss in the index file page cache, the second read will hit.
Notice that before the change, the second read issued 2 aio requests worth of 64KiB in total.
After the change, the second read issued 1 aio worth of 2 KiB. That's because promoted index block is larger than 1 KiB.
I verified using logging that the data file range matches a single promoted index block.
Also, the first read which misses in cache is still faster after the change.
Before:
```
running: large-partition-select-few-rows on dataset large-part-ds1
Testing selecting few rows from a large partition:
stride rows time (s) iterations frags frag/s mad f/s max f/s min f/s avg aio aio (KiB) blocked dropped idx hit idx miss idx blk c hit c miss c blk allocs tasks insns/f cpu
500000 1 0.009802 1 1 102 0 102 102 21.0 21 196 2 1 0 1 1 0 0 0 568 269 4716050 53.4%
500001 1 0.000321 1 1 3113 0 3113 3113 2.0 2 64 1 0 1 0 0 0 0 0 116 26 555110 45.0%
```
After:
```
running: large-partition-select-few-rows on dataset large-part-ds1
Testing selecting few rows from a large partition:
stride rows time (s) iterations frags frag/s mad f/s max f/s min f/s avg aio aio (KiB) blocked dropped idx hit idx miss idx blk c hit c miss c blk allocs tasks insns/f cpu
500000 1 0.009609 1 1 104 0 104 104 20.0 20 137 2 1 0 1 1 0 0 0 561 268 4633407 43.1%
500001 1 0.000217 1 1 4602 0 4602 4602 1.0 1 2 1 0 1 0 0 0 0 0 110 26 313882 64.1%
```
Backports: none, not a regression
Closesscylladb/scylladb#20522
* github.com:scylladb/scylladb:
perf: perf_fast_forward: Add test case for querying missing rows
perf-fast-forward: Allow overriding promoted index block size
perf-fast-forward: Test subsequent key reads from the middle in test_large_partition_select_few_rows
perf-fast-forward: Allow adding key offset in test_large_partition_select_few_rows
perf-fast-forward: Use single-partition reads in test_large_partition_select_few_rows
sstables: bsearch_clustered_cursor: Add more tracing points
sstables: reader: Log data file range
sstables: bsearch_clustered_cursor: Unify skip_info logging
sstables: bsearch_clustered_cursor: Narrow down range using "end" position of the block
sstables: bsearch_clustered_cursor: Skip even to the first block
test: sstables: sstable_3_x_test: Improve failure message
sstables: mx: writer: Never include partition_end marker in promoted index block width
sstables: Reduce amount of I/O for clustering-key-bounded reads from large partitions
sstables: clustered_cursor: Track current block
the log.hh under the root of the tree was created keep the backward
compatibility when seastar was extracted into a separate library.
so log.hh should belong to `utils` directory, as it is based solely
on seastar, and can be used all subsystems.
in this change, we move log.hh into utils/log.hh to that it is more
modularized. and this also improves the readability, when one see
`#include "utils/log.hh"`, it is obvious that this source file
needs the logging system, instead of its own log facility -- please
note, we do have two other `log.hh` in the tree.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
now that we are allowed to use C++23. we now have the luxury of using
`std::views::keys`.
in this change, we:
- replace `boost::adaptors::map_keys` with `std::views::keys`
- update affected code to work with `std::views::keys`
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21198
This includes way too much, including <boost/regex.hpp>, which is huge.
Drop includes of adaptors.hpp and replace by what is needed.
Closesscylladb/scylladb#21187
before this change, we link against the targets defined in Seastar's
source tree. but these targets are not part of Seastar's public
interface -- they are not exposed by Seastar's CMake config files.
so, let link against the target names qualified by the library module
name. this also prepares for the transition to using Seastar without
including it directly.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
Using the standard library is preffered over boost.
In cql3/expr/expression.cc to_sorted_vector got more of a
face-list and was modernized to use also std::unique
and while at it, to move its input range in the uniquely sorted
result vector.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
* seastar ec5da7a6...69f88e2f (38):
> build: s/Sanitizers_COMPILER_OPTIONS/Sanitizers_COMPILE_OPTIONS
> test: Update httpd test with request/reply body writing sugar
> http: Add sugar to request and response body writers
> utils: Add util::write_to_stream() helper
> seastar-addr2line: adjust llvm termination regex
> README.md: add Crimson project
> rpc: conditionally use fmt::runtime() based on SEASTAR_LOGGER_COMPILE_TIME_FMT
> build: check the combination of Sanitizers
> tls: clear session ticket before releasing
> print: remove dead code
> doc/lambda-coroutine-fiasco: reword for better readability
> rpc: fix compilation error caused by fmt::runtime()
> tutorial: explain the use case of rethrow_exception and coroutine::exception
> reactor: print more informative error when io_submit fails
> README.md: note GitHub discussions
> prometheus: `fmt::print` to stringstream directly
> doc: add document for testing with seastar
> seastar/testing: only include used headers
> test: Add abortable http client test cases
> http/client: Add abortable make_request() API method
> http/client: Abort established connections
> http/client: Handle abort source in pool wait
> http/client: Add abort source to factory::make() method
> http/client: Pass abort_source here and there
> http/client: Idnentation fix after previous patch
> http/client: Merge some continuations explicitly
> signal: add seastar signal api
> httpd: remove unused prometheus structs
> print: use fmtlib's fmt::format_string in format()
> rpc: do not use seastar::format() in rpc logger
> treewide: s/format/seastar::format/
> prometheus: sanitize label value for text protocol
> tests: unit test prometheus wire format
> io-tester: Introduce batches to rate-based submission
> io-tester: Generalize issueing request and collecting its result
> io-tester: Cancel intent once
> io-tester: Dont carry rps/parallelism variables over lambdas
> io-tester: Simplify in-flight management
The breaking changes in the seastar submodule necessitate corresponding
modifications in our code. These changes must be implemented together in
a single commit to maintain consistency. So that each commit is buildable.
following changes are included in addition to seastar submodule update:
* instead of passing a `const char*` for the format string, pass a
templated `fmt::format_string<...>`, this depends on the
`seastar::format()` change in seastar.
* explicitly call `fmt::runtime()` if the format string is not a
consteval expression. this depends on the `seastar::format()` change
in seastar. as `seastar::format()` does not accept a plain
`const char*` which is not constexpr anymore.
* pass abort_source to `dns_connection_factory::make()`. this depends on
the change in seastar, which added a `abort_source*` argument to
the pure virtual member function of `connection_factory::make()`.
* call call {fmt,seastar}::format() explicitly. this is a follow up of
3e84d43f, which takes care of all places where we should call
`fmt::format()` and `seastar::format()` explicitly to disambiguate the
`format()` call. but more `format()` call made their way into the source
tree after 3e84d43f. so we need fix them as well.
* include used header in tests
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Update seastar submodule
Please enter the commit message for your changes. Lines starting
Closesscylladb/scylladb#20649
"crawling" is a little bit obscure in this context. so let's rename this
class to reflect the fact that this reader only reads the entire content
of the sstable.
both crawling reader for kl and mx formats are renamed. also, in order
to be consistent, all "crawling reader" in variable names are updated
as well.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
This function was obsoleted by schema_builder some time ago. Not to patch all its callers, that helper became wrapper around it. Remained users are all in tests, and patching the to use builder directory makes the code shorter in many cases.
Closesscylladb/scylladb#20466
* github.com:scylladb/scylladb:
schema: Ditch make_shared_schema() helper
test: Tune up indentation in uncompressed_schema()
test: Make tests use schema_builder instead of make_shared_schema
before this change, we rely on `using namespace seastar` to use
`seastar::format()` without qualifying the `format()` with its
namespace. this works fine until we changed the parameter type
of format string `seastar::format()` from `const char*` to
`fmt::format_string<...>`. this change practically invited
`seastar::format()` to the club of `std::format()` and `fmt::format()`,
where all members accept a templated parameter as its `fmt`
parameter. and `seastar::format()` is not the best candidate anymore.
despite that argument-dependent lookup (ADT for short) favors the
function which is in the same namespace as its parameter, but
`using namespace` makes `seastar::format()` more competitive,
so both `std::format()` and `seastar::format()` are considered
as the condidates.
that is what is happening scylladb in quite a few caller sites of
`format()`, hence ADT is not able to tell which function the winner
in the name lookup:
```
/__w/scylladb/scylladb/mutation/mutation_fragment_stream_validator.cc:265:12: error: call to 'format' is ambiguous
265 | return format("{} ({}.{} {})", _name_view, s.ks_name(), s.cf_name(), s.id());
| ^~~~~~
/usr/bin/../lib/gcc/x86_64-redhat-linux/14/../../../../include/c++/14/format:4290:5: note: candidate function [with _Args = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
4290 | format(format_string<_Args...> __fmt, _Args&&... __args)
| ^
/__w/scylladb/scylladb/seastar/include/seastar/core/print.hh:143:1: note: candidate function [with A = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
143 | format(fmt::format_string<A...> fmt, A&&... a) {
| ^
```
in this change, we
change all `format()` to either `fmt::format()` or `seastar::format()`
with following rules:
- if the caller expects an `sstring` or `std::string_view`, change to
`seastar::format()`
- if the caller expects an `std::string`, change to `fmt::format()`.
because, `sstring::operator std::basic_string` would incur a deep
copy.
we will need another change to enable scylladb to compile with the
latest seastar. namely, to pass the format string as a templated
parameter down to helper functions which format their parameters.
to miminize the scope of this change, let's include that change when
bumping up the seastar submodule. as that change will depend on
the seastar change.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
