Not waiting for nodes to see each other as alive can cause the driver to
fail the request sent in `wait_for_upgrade_state()`.
scylladb/scylladb#19771 has already replaced concurrent restarts with
`ManagerClient.rolling_restart()`, but it has missed this single place,
probably because we do concurrent starts here.
Fixes#27055Closesscylladb/scylladb#27075
This reverts commit 43738298be.
This commit causes instability in dtests. Several non-gating dtests
started failing, as well as some gating ones, see #27047.
Closesscylladb/scylladb#27067Fixes#27047
This series allows an operator to reset 'cleanup needed' flag if he already cleaned up the node, so that automatic cleanup will not do it again. We also change 'nodetool cleanup' back to run cleanup on one node only (and reset 'cleanup needed' flag in the end), but the new '--global' option allows to run cleanup on all nodes that needed it simultaneously.
Fixes https://github.com/scylladb/scylladb/issues/26866
Backport to all supported version since automatic cleanup behaviour as it is now may create unexpected by the operator load during cluster resizing.
Closesscylladb/scylladb#26868
* https://github.com/scylladb/scylladb:
cleanup: introduce "nodetool cluster cleanup" command to run cleanup on all dirty nodes in the cluster
cleanup: Add RESTful API to allow reset cleanup needed flag
…played
Currently, if flushing hints falls within the repair cache timeout, then the flush_time is set to batchlog_manager::_last_replay. _last_replay is updated on each replay, even if some batches weren't replayed. Due to that, we risk the data resurrection.
Update _last_replay only if all batches were replayed.
Fixes: https://github.com/scylladb/scylladb/issues/24415.
Needs backport to all live versions.
Closesscylladb/scylladb#26793
* github.com:scylladb/scylladb:
test: extend test_batchlog_replay_failure_during_repair
db: batchlog_manager: update _last_replay only if all batches were replayed
This patch adds support for multiple audit log outputs.
If only one audit log output is enabled, the behavior does not change.
If multiple audit log outputs are enabled, then the `audit_composite_storage_helper` class is used. It has a collection
of `storage_helper` objects.
Performance testing shows that read query throughput and auth request throughput are consistent even at high reactor utilization. It can also be observed that read query latency increases a bit.
Read query ops = 60k/s
AUTH ops = 200/s
| Audit Mode | QUERY latency (p99) | Δ% vs none |
|------------|---------------------|------------|
| none | 777 | 0 |
|table| 801 | +3.09% |
|syslog | 803 | +3.35% |
|table,syslog | 818 | +5.28% |
Read query ops = 50k/s
AUTH ops = 200/s
| Audit Mode | QUERY latency (p99) | Δ% vs none |
|------------|---------------------|------------|
| none | 643 | 0 |
|table| 647 | +0.62% |
|syslog | 648 | +0.78% |
|table,syslog | 656 | +2.02% |
Detailed performance results are in the following Confluence document: [Audit performance impact test](https://scylladb.atlassian.net/wiki/spaces/RND/pages/148308005/Audit+performance+impact+test)
Fixes#26022
Backport:
The decision is to not backport for now. After making sure it works on the latest release, and if there is a need, we can do it.
Closesscylladb/scylladb#26613
* github.com:scylladb/scylladb:
test: dtest: audit_test.py: add AuditBackendComposite
test: dtest: audit_test.py: group logs in dict per audit mode
audit: write out to both table and syslog
audit: move storage helper creation from `audit::start` to `audit::audit`
audit: fix formatting in `audit::start_audit`
audit: unify `create_audit` and `start_audit`
97ab3f6622 changed "nodetool cleanup" (without arguments) to run
cleanup on all dirty nodes in the cluster. This was somewhat unexpected,
so this patch changes it back to run cleanup on the target node only (and
reset "cleanup needed" flag afterwards) and it adds "nodetool cluster
cleanup" command that runs the cleanup on all dirty nodes in the
cluster.
A Vector Store node is now considered down if it returns an HTTP 500
server error. This can happen, for example, if the node fails to
connect to the database or has not completed its initial full scan.
The logic for marking a node as 'up' is also enhanced. A node is now
only considered up when its status is explicitly 'SERVING'.
Fixes: VECTOR-187
Backport to 2025.4 as this feature is expected to be available in 2025.4.
Closesscylladb/scylladb#26413
* github.com:scylladb/scylladb:
vector_search: Improve vector-store health checking
vector_search: Move response_content_to_sstring to utils.hh
vector_search: Add unit tests for client error handling
vector_search: Enable mocking of status requests
vector_search: Extract abort_source_timeout and repeat_until
vector_search: Move vs_mock_server to dedicated files
This PR fixes staging stables handling by view building coordinator in case of intra-node tablet migration or tablet merge.
To support tablet merge, the worker stores the sstables grouped only be `table_id`, instead of `(table_id, last_token)` pair.
There shouldn't be that many staging sstables, so selecting relevant for each `process_staging` task is fine.
For the intra-node migration support, the patch adds methods to load migrated sstables on the destination shard and to cleanup them on source shard.
The patch should be backported to 2025.4
Fixes https://github.com/scylladb/scylladb/issues/26244Closesscylladb/scylladb#26454
* github.com:scylladb/scylladb:
service/storage_service: migrate staging sstables in view building worker during intra-node migration
db/view/view_building_worker: support sstables intra-node migration
db/view_building_worker: fix indent
db/view/view_building_worker: don't organize staging sstables by last token
A Vector Store node is now considered down if it returns an HTTP 5xx status.
This can happen, for example, if the node fails to
connect to the database or has not completed its initial full scan.
The logic for marking a node as 'up' is also enhanced. A node is now
only considered up when its status is 'SERVING'.
Introduce dedicated unit tests for the client class to verify existing
functionality and serve as regression tests.
These tests ensure that invalid client requests do not cause nodes to
be marked as down.
Extend the mock server to allow inspecting incoming status requests and
configuring their responses.
This enables client unit tests to simulate various server behaviors,
such as handling node failures and backoff logic.
The `abort_source_timeout` and `repeat_until` functions are moved to
the shared utility header `test/vector_search/utils.hh`.
This allows them to be reused by upcoming `client` unit tests, avoiding
code duplication.
This PR enables integrity check of both checksum and digest for repair/streaming.
In the past, streaming readers only verified the checksum of compressed SSTables.
This change extends the checks to include the digest and the checksum (CRC) for both compressed and uncompressed SSTables. These additional checks require reading the digest and CRC components from disk, which may cause some I/O overhead. For uncompressed SSTables, this involves loading and computing checksums and digest from the data, while for compressed SSTables - where checksums are already verified inline - the only extra cost is reading and verifying the digest.If the reader range doesn't cover the full SSTable, the digest is not loaded and check is skipped.
To support testing of these changes, a new option was added to the random_mutation_generator that allows disabling compression.
Several new test cases were added to verify that the repair_reader correctly detects corruption. These tests corrupt digest or data component of an SSTable and confirm that the system throws the expected `malformed_sstable_exception`.
Backport is not required, it is an improvement
Refs #21776Closesscylladb/scylladb#26444
* github.com:scylladb/scylladb:
boost/repair_test: add repair reader integrity verification test cases
test/lib: allow to disable compression in random_mutation_generator
sstables: Skip checksum and digest reads for unlinked SSTables
table: enable integrity checks for streaming reader
table: Add integrity option to table::make_sstable_reader()
sstables: Add integrity option to create_single_key_sstable_reader
This patch fixes 2 issues at one go:
First, Currently sstables::load clears the sharding metadata
(via open_data()), and so scylla-sstable always prints
an empty array for it.
Second, printing token values would generate invalid json
as they are currently printed as binary bytes, and they
should be printed simply as numbers, as we do elsewhere,
for example, for the first and last keys.
Fixes#26982
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#26991
Modify test_batchlog_replay_failure_during_repair to also check
that there isn't data resurrection if flushing hints falls within
the repair cache timeout.
Migration manager depends on storage service. For instance,
it has a reload_schema_in_bg background task which calls
_ss.local() so it expects that storage service is not stopped
before it stops.
To solve this we use permit approach, and during storage_service
stop:
- we ignore *new* code execution in migration_manager which'd use
storage_service
- but wait with storage_service shutdown until all *existing*
executions are done
Fixesscylladb/scylladb#26734
Backport: no need, problem existed since very long time, code restructure in https://github.com/scylladb/scylladb/commit/389afcd (and following commits) made
it hitting more often, as _ss was called earlier, but it's not released yet.
Closesscylladb/scylladb#26779
* github.com:scylladb/scylladb:
service: attach storage_service to migration_manager using pluggabe
service: migration_manager: corutinize merge_schema_from
service: migration_manager: corutinize reload_schema
Previously, only nodes in the 'normal' state and decommissioning nodes
were included in the set of nodes participating in barrier and
barrier_and_drain commands. Joining nodes are not included because they
don't coordinate requests, given their cql port is closed.
However, joining nodes may receive mutations from other nodes, for which
they may generate and coordinate materialized view updates. If their
group0 state is not synchronized it could cause lost view updates.
For example:
1. On the topology coordinator, the join completes and the joining node
becomes normal, but the joining node's state lags behind. Since it's
not synchronized by the barrier, it could be in an old state such as
`write_both_read_old`.
2. A normal node coordinates a write and sends it to the new node as the
new replica.
3. The new node applies the base mutation but doesn't generate a view
update for it, because it calculates the base-view pairing according
to its own state and replication map, and determines that it doesn't
participate in the base-view pairing.
Therefore, since the joining node participates as a coordinator for view
updates, it should be included in these barriers as well. This ensures
that before the join completes, the joining node's state is
`write_both_read_new`, where it does generate view updates.
Fixes https://github.com/scylladb/scylladb/issues/26976
backport to previous versions since it fixes a bug in MV with vnodes
Closesscylladb/scylladb#27008
* github.com:scylladb/scylladb:
test: add mv write during node join test
topology_coordinator: include joining node in barrier
vector_search: Add backoff for failed nodes
Introduces logic to mark nodes that fail to answer an ANN request as
"down". Down nodes are omitted from further requests until they
successfully respond to a health check.
Health checks for down nodes are performed in the background using the
`status` endpoint, with an exponential backoff retry policy ranging
from 100ms to 20s.
Client list management is moved to separate files (clients.cc/clients.hh)
to improve code organization and modularity.
References: VECTOR-187.
Backport to 2025.4 as this feature is expected to be available in 2025.4.
Closesscylladb/scylladb#26308
* github.com:scylladb/scylladb:
vector_search: Set max backoff delay to 2x read request timeout
vector_search: Report status check exception via on_internal_error_noexcept
vector_search: Extract client management into dedicated class
vector_search: Add backoff for failed clients
vector_search: Make endpoint available
vector_search: Use std::expected for low-level client errors
vector_search: Extract client class
The service level controller relies on `auth::service` to collect
information about roles and the relation between them and the service
levels (those attached to them). Unfortunately, the service level
controller is initialized way earlier than `auth::service` and so we
had to prevent potential invalid queries of user service levels
(cf. 46193f5e79).
Unfortunately, that came at a price: it made the maintenance socket
incompatible with the current implementation of the service level
controller. The maintenance socket starts early, before the
`auth::service` is fully initialized and registered, and is exposed
almost immediately. If the user attempts to connect to Scylla within
this time window, via the maintenance socket, one of the things that
will happen is choosing the right service level for the connection.
Since the `auth::service` is not registered, Scylla with fail an
assertion and crash.
A similar scenario occurs when using maintenance mode. The maintenance
socket is how the user communicates with the database, and we're not
prepared for that either.
To avoid unnecessary crashes, we add new branches if the passed user is
absent or if it corresponds to the anonymous role. Since the role
corresponding to a connection via the maintenance socket is the anonymous
role, that solves the problem.
Some accesses to `auth::service` are not affected and we do not modify
those.
Fixesscylladb/scylladb#26816
Backport: yes. This is a fix of a regression.
Closesscylladb/scylladb#26856
* github.com:scylladb/scylladb:
test/cluster/test_maintenance_mode.py: Wait for initialization
test: Disable maintenance mode correctly in test_maintenance_mode.py
test: Fix keyspace in test_maintenance_mode.py
service/qos: Do not crash Scylla if auth_integration absent
Remove bootstrap and decomission from allowed_repair_based_node_ops.
Using RBNO over streaming for these operations has no benefits, as they
are not exposed to the out-of-date replica problem that replace,
removenode and rebuild are.
On top of that, RBNO is known to have problems with empty user tables.
Using streaming for boostrap and decomission is safe and faster
than RBNO in all condition, especially when the table is small.
One test needs adjustment as it relies on RBNO being used for all node
ops.
Fixes: #24664Closesscylladb/scylladb#26330
The view building coordinator manages the process by sending RPC
requests to all nodes in the cluster, instructing them what to do.
If processing that message fails, the coordinator decides if it
wants to retry it or (temporarily) abandon the work.
An example of the latter scenario could be if one of the target nodes
dies and any attempts to communicate with it would fail.
Unfortunately, the current approach to it is not perfect and may result
in a storm of warnings, effectively clogging the logs. As an example,
take a look at scylladb/scylladb#26686: the gossiper failed to mark
one of the dead nodes as DOWN fast enough, and it resulted in a warning storm.
To prevent situations like that, we implement a form of backoff.
If processing an RPC message fails, we postpone finishing the task for
a second. That should reduce the number of messages in the logs and avoid
retries that are likely to fail as well.
We provide a reproducer test.
Fixesscylladb/scylladb#26686
Backport: impact on the user. We should backport it to 2025.4.
Closesscylladb/scylladb#26729
* github.com:scylladb/scylladb:
tet/cluster/mv: Clean up test_backoff_when_node_fails_task_rpc
db/view/view_building_coordinator: Rate limit logging failed RPC
db/view: Add backoff when RPC fails
When dropping a column from a CDC log table, set the column drop
timestamp several seconds into the future.
If a value is written to a column concurrently with dropping that
column, the value's timestamp may be after the column drop timestamp. If
this value is also flushed to an SSTable, the SSTable would be
corrupted, because it considers the column missing after the drop
timestamp and doesn't allow values for it.
While this issue affects general tables, it especially impacts CDC tables
because this scenario can occur when writing to a table with CDC preimage
enabled while dropping a column from the base table. This happens even if
the base mutation doesn't write to the dropped column, because CDC log
mutations can generate values for a column even if the base mutation doesn't.
For general tables, this issue can be avoided by simply not writing to a
column while dropping it.
We fix this for the more problematic case of CDC log tables by setting
the column drop timestamp several seconds into the future, ensuring that
writes concurrent with column drops are much less likely to have
timestamps greater than the column drop timestamp.
Fixes https://github.com/scylladb/scylladb/issues/26340
the issue affects all previous releases, backport to improve stability
Closesscylladb/scylladb#26533
* github.com:scylladb/scylladb:
test: test concurrent writes with column drop with cdc preimage
cdc: check if recreating a column too soon
cdc: set column drop timestamp in the future
migration_manager: pass timestamp to pre_create
Migration manager depends on storage service. For instance,
it has a reload_schema_in_bg background task which calls
_ss.local() so it expects that storage service is not stopped
before it stops.
To solve this we use permit approach, and during storage_service
stop:
- we ignore *new* code execution in migration_manager which'd use
storage_service
- but wait with storage_service shutdown until all *existing*
executions are done
Fixesscylladb/scylladb#26734
The maximum backoff delay for status checking now depends on the
`read_request_timeout_in_ms` configuration option. The delay is set
to twice the value of this parameter.
Introduces logic to mark clients that fail to answer an ANN request as
"down". Down clients are omitted from further requests until they
successfully respond to a health check.
Health checks for down clients are performed in the background using the
`status` endpoint, with an exponential backoff retry policy ranging
from 100ms to 20s.
In preparation for a new feature, the tests need the ability to make
an endpoint that was previously unavailable, available again.
This is achieved by adding an `unavailable_server::take_socket` method.
This method allows transferring the listening socket from the
`unavailable_server` to the `mock_vs_server`, ensuring they both
operate on the same endpoint.
The view building coordinator sends tasks in form of RPC messages
to other nodes in the cluster. If processing that RPC fails, the
coordinator logs the error.
However, since tasks are per replica (so per shard), it may happen
that we end up with a large number of similar messages, e.g. if the
target node has died, because every shard will fail to process its
RPC message. It might become even worse in the case of a network
partition.
To mitigate that, we rate limit the logging by 1 seconds.
We extend the test `test_backoff_when_node_fails_task_rpc` so that
it allows the view building coordinator to have multiple tablet
replica targets. If not for rate limiting the warning messages,
we should start getting more of them, potentially leading to
a test failure.
The view building coordinator manages the process of view building
by sending RPC requests to all nodes in the cluster, instructing them
what to do. If processing that message fails, the coordinator decides
if it wants to retry it or (temporarily) abandon the work.
An example of the latter scenario could be if one of the target nodes
dies and any attempts to communicate with it would fail.
Unfortunately, the current approach to it is not perfect and may result
in a storm of warnings, effectively clogging the logs. As an example,
take a look at scylladb/scylladb#26686: the gossiper failed to mark
one of the dead nodes as DOWN fast enough, and it resulted in a warning storm.
To prevent situations like that, we implement a form of backoff.
If processing an RPC message fails, we postpone finishing the task for
a second. That should reduce the number of messages in the logs and avoid
retries that are likely to fail as well.
We provide a reproducer test: it fails before this commit and succeeds
with it.
Fixesscylladb/scylladb#26686
Currently we do not support paging for vector search queries.
When we get such a query with paging enabled we ignore the paging
and return the entire result. This behavior can be confusing for users,
as there is no warning about paging not working with vector search.
This patch fixes that by adding a warning to the result of ANN queries
with paging enabled.
Closesscylladb/scylladb#26384
add a test that writes to a table concurrently with dropping a column,
where the table has CDC enabled with preimage.
the test reproduces issue #26340 where this results in a malformed
sstable.
When we drop a column from a CDC log table, we set the column drop
timestamp a few seconds into the future. This can cause unexpected
problems if a user tries to recreate a CDC column too soon, before
the drop timestamp has passed.
To prevent this issue, when creating a CDC column we check its
creation timestamp against the existing drop timestamp, if any, and
fail with an informative error if the recreation attempt is too soon.
This patch series re-enables support for speculative retry values `0` and `100`. These values have been supported some time ago, before [schema: fix issue 21825: add validation for PERCENTILE values in speculative_retry configuration. #21879
](https://github.com/scylladb/scylladb/pull/21879). When that PR prevented using invalid `101PERCENTILE` values, valid `100PERCENTILE` and `0PERCENTILE` value were prevented too.
Reproduction steps from [[Bug]: drop schema and all tables after apply speculative_retry = '99.99PERCENTILE' #26369](https://github.com/scylladb/scylladb/issues/26369) are unable to reproduce the issue after the fix. A test is added to make sure the inclusive border values `0` and `100` are supported.
Documentation is updated to give more information to the users. It now states that these border values are inclusive, and also that the precision, with automatic rounding, is 1 decimal digit.
Fixes#26369
This is a bug fix. If at any time a client tries to use value >= 99.5 and < 100, the raft error will happen. Backport is needed. The code which introduced inconsistency is introduced in 2025.2, so no backporting to 2025.1.
Closesscylladb/scylladb#26909
* github.com:scylladb/scylladb:
test: cqlpy: add test case for non-numeric PERCENTILE value
schema: speculative_retry: update exception type for sstring ops
docs: cql: ddl.rst: update speculative-retry-options
test: cqlpy: add test for valid speculative_retry values
schema: speculative_retry: allow 0 and 100 PERCENTILE values
Adds test cases to verify that repair_reader correctly detects SSTable(both comprossed and uncompressed) checksum mismatch.
Digest mismatch verification is not possible as repair readar may skip some sstable data, which automatically disables digest verification.
Each test corrupts the Data component on disk and ensures the reader throws a malformed_sstable_exception with the expected error message.
Adds a compress flag to random_mutation_generator, allowing tests to disable compression in generated mutations.
When set to compress::no, the schema builder uses no_compression() parameters.
Add a test that reproduces the issue scylladb/scylladb#26976.
The test adds a new node with delayed group0 apply, and does writes with
MV updates right after the join completes on the coordinator and while
the joining node's state is behind.
The test fails before fixing the issue and passes after.
If we try to perform queries too early, before the call to
`storage_service::start_maintenance_mode` has finished, we will
fail with the following error:
```
ERROR 2025-11-12 20:32:27,064 [shard 0:sl:d] token_metadata - sorted_tokens is empty in first_token_index!
```
To avoid that, we should wait until initialization is complete.
When generating CDC log mutations for some base mutation, use a CDC schema that is compatible with the base schema.
The compatible CDC schema has for every base column a corresponding CDC column with the same name. If using a non-compatible schema, we may encounter a situation, especially during ALTER, that we have a mutation with a base column set with some value, but the CDC schema doesn't have a column by that name. This would cause the user request to fail with an error.
We add to the schema object a schema_ptr that for CDC-enabled tables points to the schema object of the CDC table that is compatible with the schema. It is set by the schema merge algorithm when creating the schema for a table that is created or altered. We use the fact that a base table and its CDC table are created and altered in the same group0 operation, and this way we can find and set the cdc schema for a base table.
When transporting the base schema as a frozen schema between shards, we transport with it the frozen cdc schema as well.
The patch starts with a series of refactoring commits that make extending the frozen schema easier and cleans up some duplication in the code about the frozen schema. We combine the two types `frozen_schema_with_base_info` and `view_schema_and_base_info` to a single type `extended_frozen_schema` that holds a frozen schema with additional data that is not part of the schema mutations but needs to be transported with it to unfreeze it - base_info, and the frozen cdc schema which is added in a later commit.
Fixes https://github.com/scylladb/scylladb/issues/26405
backport not needed - enhancement
Closesscylladb/scylladb#24960
* github.com:scylladb/scylladb:
test: cdc: test cdc compatible schema
cdc: use compatiable cdc schema
db: schema_applier: create schema with pointer to CDC schema
db: schema_applier: extract cdc tables
schema: add pointer to CDC schema
schema_registry: remove base_info from global_schema_ptr
schema_registry: use extended_frozen_schema in schema load
schema_registry: replace frozen_schema+base_info with extended_frozen_schema
frozen_schema: extract info from schema_ptr in the constructor
frozen_schema: rename frozen_schema_with_base_info to extended_frozen_schema
This PR extends the restore API so that it accepts primary_replica_only as parameter and it combines the concepts of primary-replica-only with scoped streaming so that with:
- `scope=all primary_replica_only=true` The restoring node will stream to the global primary replica only
- `scope=dc primary_replica_only=true` The restoring node will stream to the local primary replica only.
- `scope=rack primary_replica_only=true` The restoring node will stream only to the primary replica from within its own rack (with rf=#racks, the restoring node will stream only to itself)
- `scope=node primary_replica_only=true` is not allowed, the restoring node will always stream only to itself so the primary_replica_only parameter wouldn't make sense.
The PR also adjusts the `nodetool refresh` restriction on running restore with both primary_replica_only and scope, it adds primary_replica_only to `nodetool restore` and it adds cluster tests for primary replica within scope.
Fixes#26584Closesscylladb/scylladb#26609
* github.com:scylladb/scylladb:
Add cluster tests for checking scoped primary_replica_only streaming
Improve choice distribution for primary replica
Refactor cluster/object_store/test_backup
nodetool restore: add primary-replica-only option
nodetool refresh: Enable scope={all,dc,rack} with primary_replica_only
Enable scoped primary replica only streaming
Support primary_replica_only for native restore API
`topology_cooridinator::migrate_tablet_size()` was introduced in 10f07fb95a. It has a bug where the has_tablet_size() lambda always returns false because of bad comparison of iterators after a table and tablet search:
```
if (auto table_i = tables.find(gid.table); table_i != tables.find(gid.table)) {
if (auto size_i = table_i->second.find(trange); size_i != table_i->second.find(trange)) {
```
This change also fixes a problem where the `migrate_tablet_size()` would crash with a `std::out_of_range` if the pending node was not present in load_stats.
This change fixes these two problems and moves the functionality into a separate method of `load_stats`. It also adds tests for the new method.
A version containing this bug has not been released yet, so no backport is needed.
Closesscylladb/scylladb#26946
* github.com:scylladb/scylladb:
load_stats: add test for migrate_tablet_size()
load_stats: fix problem with tablet size migration
cql3: Fix std::bad_cast when deserializing vectors of collections
This PR fixes a bug where attempting to INSERT a vector containing collections (e.g., `vector<set<int>,1>`) would fail. On the client side, this manifested as a `ServerError: std::bad_cast`.
The cause was "type slicing" issue in the reserialize_value function. When retrieving the vector's element type, the result was being assigned by value (using auto) instead of by reference.
This "sliced" the polymorphic abstract_type object, stripping it of its actual derived type information. As a result, a subsequent dynamic_cast would fail, even if the underlying type was correct.
To prevent this entire class of bugs from happening again, I've made the polymorphic base class `abstract_type` explicitly uncopyable.
Fixes: #26704
This fix needs to be backported as these releases are affected: `2025.4` , `2025.3`.
Closesscylladb/scylladb#26740
* github.com:scylladb/scylladb:
cql3: Make abstract_type explicitly noncopyable
cql3: Fix std::bad_cast when deserializing vectors of collections
Recently we enabled tablets by default, but it is necessary to
enable rf_rack_valid_keyspaces if materialized views are to be used
with tablets, and this option is *not* the default.
We did add this option in test/pylib/scylla_cluster.py which is
used by test.py, but we didn't add it to test/cqlpy/run.py, so
the test/cqlpy/run script is no longer able to run tests with
materialized views. So this patch adds the missing configuration
to run.py.
FIxes#26918
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#26919
When deserializing a vector whose elements are collections (e.g., set, list),
the operation raises a `std::bad_cast` exception.
This was caused by type slicing due to an incorrect assignment of a
polymorphic type by value instead of by reference. This resulted in a
failed `dynamic_cast` even when the underlying type was correct.
In the test translated from Cassandra validation/operations/alter_test.py
we had two lines in the beginning of an unrelated test that verified
that CREATE KEYSPACE is not allowed without replication parameters.
But starting recently, ScyllaDB does have defaults and does allow these
CREATE KEYSPACE. So comment out these two test lines.
We didn't notice that this test started to fail, because it was already
marked xfail, because in the main part of this test, it reproduces a
different issue!
The annoying side-affect of these no-longer-passing checks was that
because the test expected a CREATE KEYSPACE to fail, it didn't bother
to delete this keyspace when it finished, which causes test.py to
report that there's a problem because some keyspaces still exist at the
end of the test. Now that we fixed this problem, we no longer need to
list this test in test/cqlpy/suite.yaml as a test that leaves behind
undeleted keyspaces.
Fixes#26292
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#26341
Before this series, Alternator's CreateTable operation defaults to creating a table replicated with vnodes, not tablets. The reasons for this default included missing support for LWT, Materialized Views, Alternator TTL and Alternator Streams if tablets are used. But today, all of these (except the still-experimental Alternator Streams) are now fully available with tablets, so we are finally ready to switch Alternator to use tablets by default in new tables.
We will use the same configuration parameter that CQL uses, tablets_mode_for_new_keyspaces, to determine whether new keyspaces use tablets by default. If set to `enabled`, tablets are used by default on new tables. If set to `disabled`, tablets will not be used by default (i.e., vnodes will be used, as before). A third value, `enforced` is similar to `enabled` but forbids overriding the default to vnodes when creating a table.
As before, the user can set a tag during the CreateTable operation to override the default choice of tablets or vnodes (unless in `enforced` mode). This tag is now named `system:initial_tablets` - whereas before this patch it was called `experimental:initial_tablets`. The rules stay the same as with the earlier, experimental:initial_tablets tag: when supplied with a numeric value, the table will use tablets. When supplied with something else (like a string "none"), the table will use vnodes.
Fixes https://github.com/scylladb/scylladb/issues/22463
Backport to 2025.4, it's important not to delay phasing out vnodes.
Closesscylladb/scylladb#26836
* github.com:scylladb/scylladb:
test,alternator: use 3-rack clusters in tests
alternator: improve error in tablets_mode_for_new_keyspaces=enforced
config: make tablets_mode_for_new_keyspaces live-updatable
alternator: improve comment about non-hidden system tags
alternator: Fix test_ttl_expiration_streams()
alternator: Fix test_scan_paging_missing_limit()
alternator: Don't require vnodes for TTL tests
alternator: Remove obsolete test from test_table.py
alternator: Fix tag name to request vnodes
alternator: Fix test name clash in test_tablets.py
alternator: test_tablets.py handles new policy reg. tablets
alternator: Update doc regarding tablets support
alternator: Support `tablets_mode_for_new_keyspaces` config flag
Fix incorrect hint for tablets_mode_for_new_keyspaces
Fix comment for tablets_mode_for_new_keyspaces
Add a test to check that paged secondary index queries behave correctly
when pages are short. This is currently failing in Scylla, but passes in
Cassandra 5, therefore marked as "xfailing". Refer to the test's
docstring for more details.
The bug is a regression introduced by commit f6f18b1.
`test/cqlpy/run --release ...` shows that the test passes in 5.1 but
fails in 5.2 onwards.
Refs #25839.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#25843
