This flag was added to operations which have an --output-dir
command-line arguments. These operations write sstables and need a
directory where to write them. Back in the numeric-generation world this
posed a problem: if the directory contained any sstable, generation
clash was almost guaranteed, because each scylla-sstable command
invokation would start output generations from 1. To avoid this, empty
output directory was a requirement, with the
--unsafe-accept-nonempty-output-dir allowing for a force-override.
Now in the timeuuid generation days, all this is not necessary anymore:
generations are unique, so it is not a problem if the output directory
already contains sstables: the probability of generation clash is almost
0. Even if it happens, the tool will just simply fail to write the new
sstable with the clashing generation.
Remove this historic relic of a flag and the related logic, it is just a
pointless nuissance nowadays.
The original scrub test was done by the Cassandra project, hence there
is two Licenses notices: one for the original work by Cassandra
(2015) and one for our modifications on top (2021).
And dependencies: get_sstables() and __gather_sstables().
Code is importend verbatim, but doesn't work yet (no users yet either).
Will be patched to work in the next commit.
To hopefully shut up CodeQL "Iterable can be either a string or a sequence".
This change makes the code more readable anyway, so it is more than just
a gratuitous change to make some code-scanner happy.
2-DC cluster parallel non-RBNO rebuild failure when expanding RF in DC2.
Steps to reproduce:
1. Provision a cluster with 2 datacenters and at least 2 nodes in the second datacenter.
2. Let’s assume datacenter names are "dc1" and "dc2".
3. Create a keyspace ("keyspace1") with RF=0 in dc2.
4. Populate some data into dc1.
5. Change keyspace1 replication in dc2 to 2.
6. On 2 nodes in dc2 run the following command in parallel:
nodetool rebuild --source-dc dc1
Parallel execution of rebuilds is not possible with RBNO enabled.
This test is the repro for #27804Closesscylladb/scylladb#27747
After tests end, an extra check is performed, looking into node logs for crashes, aborts and similar issues.
The test directory is also scanned for coredumps.
If any of the above are found, the test will fail with an error.
The following checks are made:
- Any log line matching `Assertion.*failed` or containing `AddressSanitizer` is marked as a critical error
- Lines matching `Aborting on shard` will only be marked as a critical error if the paterns in `manager.ignore_cores_log_patterns` are not found in that log
- If any critical error is found, the log is also scanned for backtraces
- Any backtraces found are decoded and saved
- If the test is marked with `@pytest.mark.check_nodes_for_errors`, the logs are checked for any `ERROR` lines
- Any pattern in `manager.ignore_log_patterns` and `manager.ignore_cores_log_patterns` will cause above check to ignore that line
- The `expected_error` value that many methods, like `manager.decommission_node`, have will be automatically appended to `manager.ignore_log_patterns`
refs: https://github.com/scylladb/qa-tasks/issues/1804
---
[Examples](https://jenkins.scylladb.com/job/scylla-staging/job/cezar/job/byo_build_tests_dtest/46/testReport/):
Following examples are run on a separate branch where changes have been made to enable these failures.
`test_unfinished_writes_during_shutdown`
- Errors are found in logs and are not ignored
```
failed on teardown with "Failed:
Server 2096: found 1 error(s) (log: scylla-2096.log)
ERROR 2025-12-15 14:20:06,563 [shard 0: gms] raft_topology - raft_topology_cmd barrier_and_drain failed with: std::runtime_error (raft topology: command::barrier_and_drain, the version has changed, version 11, current_version 12, the topology change coordinator had probably migrated to another node)
Server 2101: found 4 error(s) (log: scylla-2101.log)
ERROR 2025-12-15 14:20:04,674 [shard 0:strm] repair - repair[c434c0c0-68da-472c-ba3e-ed80960ce0d5]: Repair 1 out of 4 ranges, keyspace=system_distributed, table=view_build_status, range=(minimum token,maximum token), peers=[27c027a6-603d-49d0-8766-1b085d8c7d29, b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e], live_peers=[b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e], status=failed: mandatory neighbor=27c027a6-603d-49d0-8766-1b085d8c7d29 is not alive
ERROR 2025-12-15 14:20:04,674 [shard 1:strm] repair - repair[c434c0c0-68da-472c-ba3e-ed80960ce0d5]: Repair 1 out of 4 ranges, keyspace=system_distributed, table=view_build_status, range=(minimum token,maximum token), peers=[27c027a6-603d-49d0-8766-1b085d8c7d29, b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e], live_peers=[b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e], status=failed: mandatory neighbor=27c027a6-603d-49d0-8766-1b085d8c7d29 is not alive
ERROR 2025-12-15 14:20:04,675 [shard 0: gms] raft_topology - raft_topology_cmd stream_ranges failed with: std::runtime_error (["shard 0: std::runtime_error (repair[c434c0c0-68da-472c-ba3e-ed80960ce0d5]: 1 out of 4 ranges failed, keyspace=system_distributed, tables=[\"view_build_status\", \"cdc_generation_timestamps\", \"service_levels\", \"cdc_streams_descriptions_v2\"], repair_reason=bootstrap, nodes_down_during_repair={27c027a6-603d-49d0-8766-1b085d8c7d29}, aborted_by_user=false, failed_because=std::runtime_error (Repair mandatory neighbor=27c027a6-603d-49d0-8766-1b085d8c7d29 is not alive, keyspace=system_distributed, mandatory_neighbors=[27c027a6-603d-49d0-8766-1b085d8c7d29, b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e]))", "shard 1: std::runtime_error (repair[c434c0c0-68da-472c-ba3e-ed80960ce0d5]: 1 out of 4 ranges failed, keyspace=system_distributed, tables=[\"view_build_status\", \"cdc_generation_timestamps\", \"service_levels\", \"cdc_streams_descriptions_v2\"], repair_reason=bootstrap, nodes_down_during_repair={27c027a6-603d-49d0-8766-1b085d8c7d29}, aborted_by_user=false, failed_because=std::runtime_error (Repair mandatory neighbor=27c027a6-603d-49d0-8766-1b085d8c7d29 is not alive, keyspace=system_distributed, mandatory_neighbors=[27c027a6-603d-49d0-8766-1b085d8c7d29, b549cb36-fae8-490b-a19e-86d42e7aa07a, f7049967-81ff-4296-9be7-9d6a4d33a29e]))"])
ERROR 2025-12-15 14:20:06,812 [shard 0:main] init - Startup failed: std::runtime_error (Bootstrap failed. See earlier errors (Rolled back: Failed stream ranges: std::runtime_error (failed status returned from 9dd942aa-acec-4105-9719-9bda403e8e94)))
Server 2094: found 1 error(s) (log: scylla-2094.log)
ERROR 2025-12-15 14:20:04,675 [shard 0: gms] raft_topology - send_raft_topology_cmd(stream_ranges) failed with exception (node state is bootstrapping): std::runtime_error (failed status returned from 9dd942aa-acec-4105-9719-9bda403e8e94)"
```
`test_kill_coordinator_during_op`
- aborts caused by injection
- `ignore_cores_log_patterns` is not set
- while there are errors in logs and `ignore_log_patterns` is not set, they are ignored automatically due to the `expected_error` parameter, such as in `await manager.decommission_node(server_id=other_nodes[-1].server_id, expected_error="Decommission failed. See earlier errors")`
```
failed on teardown with "Failed:
Server 1105: found 1 critical error(s), 1 backtrace(s) (log: scylla-1105.log)
Aborting on shard 0, in scheduling group gossip.
1 backtrace(s) saved in scylla-1105-backtraces.txt
Server 1106: found 1 critical error(s), 1 backtrace(s) (log: scylla-1106.log)
Aborting on shard 0, in scheduling group gossip.
1 backtrace(s) saved in scylla-1106-backtraces.txt
Server 1113: found 1 critical error(s), 1 backtrace(s) (log: scylla-1113.log)
Aborting on shard 0, in scheduling group gossip.
1 backtrace(s) saved in scylla-1113-backtraces.txt
Server 1148: found 1 critical error(s), 1 backtrace(s) (log: scylla-1148.log)
Aborting on shard 0, in scheduling group gossip.
1 backtrace(s) saved in scylla-1148-backtraces.txt"
```
Decoded backtrace can be found in [failed_test_logs](https://jenkins.scylladb.com/job/scylla-staging/job/cezar/job/byo_build_tests_dtest/46/artifact/testlog/x86_64/dev/failed_test/test_kill_coordinator_during_op.dev.1)
Closesscylladb/scylladb#26177
* github.com:scylladb/scylladb:
test: add logging to crash_coordinator_before_stream injection
test: add crash detection during tests
test.py: add pid to ServerInfo
The tests in `TestLargePartitionAlterSchema` are `test_large_partition_with_add_column`
and `test_large_partition_with_drop_column`.
These tests need to replicate the following conditions that led to a bug before a fix from around 5 years ago.
The scenario in which the problem could have happened has to involve:
- a large partition with many rows, large enough for preemption (every 0.5ms) to happen during the scan of the partition.
- appending writes to the partition (not overwrites)
- scans of the partition
- schema alter of that table. The issue is exposed only by adding or dropping a column, such that the added/dropped
column lands in the middle (in alphabetical order) of the old column set.
The way the test is set up is:
- fixed number of writes per populate call
- fixed number of reads
This has the following implications:
- if the machine executing the test is fast, all the writes are done before the 10 seconds sleep
- there are too many reads - most of them get executed after the test logic is done
This patch solves these issues in the following way:
- populate lazily generates write data, and stops when instructed by `stop_populating` event
- read, which is done sequentially, stops when instructed by `stop_reading` event
- number of max operations is increased significantly, but the operations are stopped 1 second
after node flush; this makes sure there are enough operations during the test, but also that
the test does not take unnecessary time
Test execution time has been reduced severalfold. On dev machine the time the tests take is
reduced from 110 seconds to 34 seconds.
The patch also introduces a few small improvements:
- `cs_run` renamed to `run_stress` for clarity
- Stopped checking if cluster is `ScyllaCluster`, since it is the only one we use
- `case_map` removed from `test_alter_table_in_parallel_to_read_and_write`, used `mixed` param directly
- Added explanation comment on why we do `data[i].append(None)`
- Replaced `alter_table` inner function with its body, for simplicity
- Removed unnecessary `ck_rows` variable in `populate`
- Removed unnecessary `isinstance(self.cluster. ScyllaCluster)`
- Adjusted `ThreadPoolExecutor` size in several places where 5 workers are not needed
- Replaced functional programming style expressions for `new_versions` and `columns_list` with
comprehension/generator statement python style code, improving readability
Refs #26932
fix
After tests end, an extra check if performed, looking into node logs.
By default, it only searches for critical errors and scans for coredumps.
If the test has the fixture `check_nodes_for_errors`, it will search for all errors.
Both checks can be ignored by setting `ignore_cores_log_patterns` and `ignore_log_patterns`.
If any of the above are found, the test will fail with an error.
`large_partition_with_add_column_test` and `large_partition_with_drop_column_test`
were added on August 17th, 2020 in scylladb/scylla-dtest#1569.
Only `large_partition_with_drop_column_test` was migrated to pytest, and renamed
to `test_large_partition_with_drop_column` on March 31st, 2021 in scylladb/scylla-dtest#2051.
Since then this test has not been running.
This patch fixes it - the test is updated and renamed and the testing environment
now properly picks it up.
Refs #26932
Extract repeated cluster initialization code in `TestSchemaManagement`
into a separate `prepare` method. It holds all the common code for
cluster preparation, with just the necessary parameters.
Refs #26932
Extract regex compilation from the stress functions to the module level,
to avoid unnecessary regex compilation repetition.
Add descriptions to the stress functions.
Do not materialize list in `stress_object` for loop. Use a generator expression.
Make `_set_stress_val` an object method.
Refs #26932
Remove unused function markers.
Add wait_other_notice=True to cluster start method in
TestSchemaHistory.prepare function to make the test stable.
Enable the test in suite.yaml for dev and debug modes.
Fixes#26932
Copy schema_management_test.py from scylla-dtest to
test/cluster/dtest/schema_management_test.py.
Add license header.
Disable it for debug, dev, and release mode.
Refs #26932
Fixes#26744
If a segment to replay is broken such that the main header is not zero, but still broken, we throw header_checksum_error. This was not handled in replayer, which grouped this into the "user error/fundamental problem" category.
However, assuming we allow for "real" disk corruption, this should really be treated same as data corruption, i.e. reported data loss, not failure to start up.
The `test_one_big_mutation_corrupted_on_startup` test accidentally sometimes provoked this issue, by doing random file wrecking, which on rare occasions provoked this, and thus failed test due to scylla not starting up, instead of losing data as expected.
Closesscylladb/scylladb#27556
* github.com:scylladb/scylladb:
test::cluster::dtest::tools::files: Remove file
commitlog_replay: Handle fully corrupt files same as partial corruption.
test::pylib::suite::base: Split options.name test specifier only once
`test_insert_failure_doesnt_report_success` test in `test/cluster/dtest/audit_test.py`
has an insert statement that is expected to fail. Dtest environment uses
`FlakyRetryPolicy`, which has `max_retries = 5`. 1 initial fail and 5 retry fails
means we expect 6 error audit logs.
The test failed because `create keyspace ks` failed once, then succeeded on retry.
It allowed the test to proceed properly, but the last part of the test that expects
exactly 6 failed queries actually had 7.
The goal of this patch is to make sure there are exactly 6 = 1 + `max_retries` failed
queries, counting only the query expected to fail. If other queries fail with
successful retry, it's fine. If other queries fail without successful retry, the test
will fail, as it should in such situations. They are not related to this expected
failed insert statement.
Fixes#27322Closesscylladb/scylladb#27378
This contained only one routine; `corrupt_file`, which is
highly problematic, and not used. If you want to "corrupt" a
file, it should be done controlled, not at random.
Fixes#26744
If a segment to replay is broken such that the main header is not zero,
but still broken, we throw header_checksum_error. This was not handled in
replayer, which grouped this into the "user error/fundamental problem"
category. However, assuming we allow for "real" disk corruption, this should
really be treated same as data corruption, i.e. reported data loss, not
failure to start up.
The `test_one_big_mutation_corrupted_on_startup` test accidentally sometimes
provoked this issue, by doing random file wrecking, which on rare occasions
provoked this, and thus failed test due to scylla not starting up, instead
of loosing data as expected.
Changed test to consistently cause this exact error instead.
This reverts commit b0643f8959, reversing
changes made to e8b0f8faa9.
The change forgot to update
sstables_manager::get_highest_supported_format(), which results in
/system/highest_supported_sstable_version still returning me, confusing
and breaking tests.
Fixes: scylladb/scylla-dtest#6435Closesscylladb/scylladb#27379
Trie-based sstable indexes are supposed to be (hopefully)
a better default than the old BIG indexes.
Make them the new default.
If we change our mind, this change can be reverted later.
Trie-based indexes and older indexes have a difference in metrics,
and the test uses the metrics to check for bypass cache.
To choose the right metrics, it uses highest_supported_sstable_format,
which is inappropriate, because the sstable format chosen for writes
by Scylla might be different than highest_supported_sstable_format.
Use chosen_sstable_format instead.
cluster.dtest_alternator_tests.test_slow_query_logging performs
a bootstrap with 768 token ranges.
It works with `me` sstables, which have 2 open file descriptors
per open sstable, but with `ms` sstables, which have 3 open
file descriptors per open sstable, it fails with EMFILE.
To avoid this problem, let's just decrease the number of vnodes
for in the test suite. It's appropriate anyway, because it avoids some
unneeded work without weakening the tests.
(Note: pylib-based have been setting `num_tokens` to 16 for a long time too).
This breaks `bypass_cache_test`, which is written in a way that expects
a certain number of token ranges. We adjust the relevant parameter
accordingly.
This patch adds support for multiple audit log outputs.
If only one audit log output is enabled, the behavior does not change.
If multiple audit log outputs are enabled, then the `audit_composite_storage_helper` class is used. It has a collection
of `storage_helper` objects.
Performance testing shows that read query throughput and auth request throughput are consistent even at high reactor utilization. It can also be observed that read query latency increases a bit.
Read query ops = 60k/s
AUTH ops = 200/s
| Audit Mode | QUERY latency (p99) | Δ% vs none |
|------------|---------------------|------------|
| none | 777 | 0 |
|table| 801 | +3.09% |
|syslog | 803 | +3.35% |
|table,syslog | 818 | +5.28% |
Read query ops = 50k/s
AUTH ops = 200/s
| Audit Mode | QUERY latency (p99) | Δ% vs none |
|------------|---------------------|------------|
| none | 643 | 0 |
|table| 647 | +0.62% |
|syslog | 648 | +0.78% |
|table,syslog | 656 | +2.02% |
Detailed performance results are in the following Confluence document: [Audit performance impact test](https://scylladb.atlassian.net/wiki/spaces/RND/pages/148308005/Audit+performance+impact+test)
Fixes#26022
Backport:
The decision is to not backport for now. After making sure it works on the latest release, and if there is a need, we can do it.
Closesscylladb/scylladb#26613
* github.com:scylladb/scylladb:
test: dtest: audit_test.py: add AuditBackendComposite
test: dtest: audit_test.py: group logs in dict per audit mode
audit: write out to both table and syslog
audit: move storage helper creation from `audit::start` to `audit::audit`
audit: fix formatting in `audit::start_audit`
audit: unify `create_audit` and `start_audit`
Add `AuditBackendComposite`, a test class which allows testing multiple
audit outputs in a single run, implemented in `audit_composite_storage_helper`
class.
Add two more tests.
`test_composite_audit_type_invalid` tests if an invalid audit mode among
correct ones causes the same error as when it is the only specified audit mode.
`test_composite_audit_empty_settings` tests if `'none'` audit mode, when
specified along other audit modes, properly disables audit logging.
Refs #26022
Before this patch audit test could process audit logs from a single
audit output. This patch adds support for multiple audit outputs
in the same run. The change is needed in order to test
`audit_composite_storage_helper`, which can write to multiple
audit outputs.
Refs #26022
With rf_rack_valid_keyspaces enabled, RF of alternator tables will be
equal to the number of racks (in this test: nodes). Prior to that, if
number of nodes is smaller than 3, alternator creates the keyspace
with RF=1. Turns out, with RF=2 the test fails with write timeouts due
to contention. Enforce RF=1 by creating the table with one node before
adding the second node.
This PR migrates limits tests from dtest to this repository.
One reason is that there is an ongoing effort to migrate tests from dtest to here.
Debug logs are enabled on `test_max_cells` for `lsa-timing` logger, to have more information about memory reclaim operation times and memory chunk sizes. This will allow analysis of their value distributions, which can be helpful with debugging if the issue reoccurs.
Also, scylladb keeps sql files with metrics which, with some modifications, can be used to track metrics over time for some tests. This would show if there are pauses and spikes or the test performance is more or less consistent over time.
scylla-dtest PR that removes migrated tests:
[limits_test.py: remove tests already ported to scylladb repo #6232](https://github.com/scylladb/scylla-dtest/pull/6232)
Fixes#25097
This is a migration of existing tests to this repository. No need for backport.
Closesscylladb/scylladb#26077
* github.com:scylladb/scylladb:
test: dtest: limits_test.py: test_max_cells log level
test: dtest: limits_test.py: make the tests work
test: dtest: test_limits.py: remove test that are not being migrated
test: dtest: copy unmodified limits_test.py
This is yet another part in the BTI index project.
Overarching issue: https://github.com/scylladb/scylladb/issues/19191
Previous part: https://github.com/scylladb/scylladb/pull/25626
Next parts: make `ms` the default. Then, general tweaks and improvements. Later, potentially a full `da` format implementation.
This patch series introduces a new, Scylla-only sstable format version `ms`, which is like `me`, but with the index components (Summary.db and Index.db) replaced with BTI index components (Partitions.db and Rows.db), as they are in Cassandra 5.0's `da` format version.
(Eventually we want to just implement `da`, but there are several other changes (unrelated to the index files) between `me` and `da`. By adding this `ms` as an intermediate step we can adapt the new index formats without dragging all the other changes into the mix (and raising the risk of regressions, which is already high)).
The high-level structure of the PR is:
1. Introduce new component types — `Partitions` and `Rows`.
2. Teach `class sstable` to open them when they exist.
3. Teach the sstable writer how to write index data to them.
4. Teach `class sstable` and unit tests how to deal with sstables that have no `Index` or `Summary` (but have `Partitions` and `Rows` instead).
5. Introduce the new sstable version `ms`, specify that it has `Partitions` and `Rows` instead of `Index` and `Summary`.
6. Prepare unit tests for the appearance of `ms`.
7. Enable `ms` in unit tests.
8. Make `ms` enablable via db::config (with a silent fall back to `me` until the new `MS_SSTABLE_FORMAT` cluster feature is enabled).
9. Prepare integration tests for the appearance of `ms`.
10. Enable both `ms` and `me` in tests where we want both versions to be tested.
This series doesn't make `ms` the default yet, because that requires teaching Scylla Manager and a few dtests about the new format first. It can be enabled by setting `sstable_format: ms` in the config.
Per a review request, here is an example from `perf_fast_forward`, demonstrating some motivation for a new format. (Although not the main one. The main motivations are getting rid of restrictions on the RAM:disk ratio, and index read throughput for datasets with tiny partitions). The dataset was populated with `build/release/scylla perf-fast-forward --smp=1 --sstable-format=$VERSION --data-directory=data.$VERSION --column-index-size-in-kb=1 --populate --random-seed=0`.
This test involves a partition with 1000000 clustering rows (with 32-bit keys and 100-byte values) and ~500 index blocks, and queries a few particular rows from the partition. Since the branching factor for the BIG promoted index is 2 (it's a binary search), the lookup involves ~11.2 sequential page reads per row. The BTI format has a more reasonable branching factor, so it involves ~2.3 page reads per row.
`build/release/scylla perf-fast-forward --smp=1 --data-directory=perf_fast_forward_data/me --run-tests=large-partition-select-few-rows`:
```
offset stride rows iterations avg aio aio (KiB)
500000 1 1 70 18.0 18 128
500001 1 1 647 19.0 19 132
0 1000000 1 748 15.0 15 116
0 500000 2 372 29.0 29 284
0 250000 4 227 56.0 56 504
0 125000 8 116 106.0 106 928
0 62500 16 67 195.0 195 1732
```
`build/release/scylla perf-fast-forward --smp=1 --data-directory=perf_fast_forward_data/ms --run-tests=large-partition-select-few-rows`:
```
offset stride rows iterations avg aio aio (KiB)
500000 1 1 51 5.1 5 20
500001 1 1 64 5.3 5 20
0 1000000 1 679 4.0 4 16
0 500000 2 492 8.0 8 88
0 250000 4 804 16.0 16 232
0 125000 8 409 31.0 31 516
0 62500 16 97 54.0 54 1056
```
Index file size comparison for the default `perf_fast_forward` tables with `--random-seed=0`:
Large partition table (dominated by intra-partition index): 2.4 MB with `me`, 732 kB with `ms`.
For the small partitions table (dominated by inter-partition index): 11 MB with `me`, 8.4 MB with `ms`.
External tests:
I ran SCT test `longevity-mv-si-4days-streaming-test` test on 6 nodes with 30 shards each for 8 hours. No anomalies were observed.
New functionality, no backport needed.
Closesscylladb/scylladb#26215
* github.com:scylladb/scylladb:
test/boost/bloom_filter_test: add test_rebuild_from_temporary_hashes
test/cluster: add test_bti_index.py
test: prepare bypass_cache_test.py for `ms` sstables
sstables/trie/bti_index_reader: add a failure injection in advance_lower_and_check_if_present
test/cqlpy/test_sstable_validation.py: prepare the test for `ms` sstables
tools/scylla-sstable: add `--sstable-version=?` to `scylla sstable write`
db/config: expose "ms" format to the users via database config
test: in Python tests, prepare some sstable filename regexes for `ms`
sstables: add `ms` to `all_sstable_versions`
test/boost/sstable_3_x_test: add `ms` sstables to multi-version tests
test/lib/index_reader_assertions: skip some row index checks for BTI indexes
test/boost/sstable_inexact_index_test: explicitly use a `me` sstable
test/boost/sstable_datafile_test: skip test_broken_promoted_index_is_skipped for `ms` sstables
test/resource: add `ms` sample sstable files for relevant tests
test/boost/sstable_compaction_test: prepare for `ms` sstables.
test/boost/index_reader_test: prepare for `ms` sstables
test/boost/bloom_filter_tests: prepare for `ms` sstables
test/boost/sstable_datafile_test: prepare for `ms` sstables
test/boost/sstable_test: prepare for `ms` sstables.
sstables: introduce `ms` sstable format version
tools/scylla-sstable: default to "preferred" sstable version, not "highest"
sstables/mx/reader: use the same hashed_key for the bloom filter and the index reader
sstables/trie/bti_index_reader: allow the caller to passing a precalculated murmur hash
sstables/trie/bti_partition_index_writer: in add(), get the key hash from the caller
sstables/mx: make Index and Summary components optional
sstables: open Partitions.db early when it's needed to populate key range for sharding metadata
sstables: adapt sstable::set_first_and_last_keys to sstables without Summary
sstables: implement an alternative way to rebuild bloom filters for sstables without Index
utils/bloom_filter: add `add(const hashed_key&)`
sstables: adapt estimated_keys_for_range to sstables without Summary
sstables: make `sstable::estimated_keys_for_range` asynchronous
sstables/sstable: compute get_estimated_key_count() from Statistics instead of Summary
replica/database: add table::estimated_partitions_in_range()
sstables/mx: implement sstable::has_partition_key using a regular read
sstables: use BTI index for queries, when present and enabled
sstables/mx/writer: populate BTI index files
sstables: create and open BTI index files, when enabled
sstables: introduce Partition and Rows component types
sstables/mx/writer: make `_pi_write_m.partition_tombstone` a `sstables::deletion_time`
The test looks at metrics to confirm whether queries
hit the row cache, the index cache or the disk,
depending on various settings.
BIG index readers use a two level, read-through index cache,
where the higher layer stores parsed "index pages"
of Index.db, while the lower layer is a cache of
raw 4kiB file pages of Index.db.
Therefore, if we want to count index cache hits,
the appropriate metric to check in this case is
`scylla_sstables_index_page_hits",
which counts hits in the higher layer.
This is done by the test.
However, BTI index readers don't have an equivalent of the higher cache
layer. Their cache only stores the raw 4 kiB pages, and the hits are
counted in `scylla_sstables_index_page_cache_hits`. (The same metric
is incremented by the lower layer of the BIG index cache).
Before this commit, the test would fail with `ms` sstables,
because their reads don't increment `scylla_sstables_index_page_hits`.
In this commit we adapt the test so that it instead checks
`scylla_sstables_index_page_cache_hits` for `ms` sstables.
Set `lsa-timing` logger log level to `debug`. This will help with
the analysis of the whole spectrum of memory reclaim operation
times and memory sizes.
Refs #25097
Copy limits_test.py from scylla-dtest to test/cluster/dtest/limits_test.py.
Add license header.
Disable it for `debug`, `dev`, and `release` mode.
Refs #25097
As a part of the porting process remove unused markers.
Explicitly enable auto snapshots for the test, as they are required for it.
Enable the test in suite.yaml (run in dev mode only)
Closesscylladb/scylladb#26248
* github.com:scylladb/scylladb:
test.py: dtest: make cfid_test.py run using test.py As a part of the porting process remove unused markers.
test.py: dtest: copy unmodified cfid_test.py
The commitlog in the tests with big mutations were corrupted by overwriting 10 chunks of 1KB with random data, which could not be enough due to randomness and the big size of the commitlog (~65MB).
- change `corrupt_file` to overwrite a based on a percentage of the file's size instead of fixed number of chunks
- fix typos
- cleanup comments for clarity
Closes: #25627Closesscylladb/scylladb#25979
* github.com:scylladb/scylladb:
test: cleanup big mutation commitlog tests
test: fix test_one_big_mutation_corrupted_on_startup
As a part of the porting process remove unused markers.
Explicitly enable auto snapshots for the test, as they are required for it.
Enable the test in suite.yaml (run in dev mode only)
`line_to_row` is a test function that converts `syslog` audit log to
the format of `table` audit log so tests can use the same checks
for both types of audit. Because `syslog` audit doesn't have `date`
information, the field was filled with the current date. This behavior
broke the tests running at 23:59:59 because `line_to_row` returned
different results on different days.
Fixes: scylladb/scylladb#25509Closesscylladb/scylladb#26101
- fix typos
- improve comments
- remove false and misleading comments
- remove `disableautocompaction` as it did nothing for the test
and the comment with it was false
The commitlog in the tests with big mutations were corrupted by
overwriting 10 chunks of 1KB with random data, which could not be enough
due to randomness and the big size of the commitlog (~65MB).
Change `corrupt_file` to overwrite based on a percentage
of the file's size instead of fixed number of chunks.
refs: #25627
The test is flaky since it tries to corrupt the commitlog
in a non-deterministic way that sometimes allows
the tested mutation to escape and be replayed anyhow.
refs: #25627Closesscylladb/scylladb#25950
test_pinned_cl_segment_doesnt_resurrect_data was not moved in #24946 from
scylla-dtest to this repo, because it's marked as xfail (#14879), but
actually the issue is fixed and there is no reason to keep the test in
scylla-dtest.
Also remove unused imports.
Closesscylladb/scylladb#25592
Tests test_total_space_limit_of_commitlog_with_large_limit and
test_total_space_limit_of_commitlog_with_medium_limit use too much
disk space and have too big execution time. Keep them in
scylla-dtest for now.
As a part of the porting process, remove unused imports and
markers, remove non-next_gating tests and tests marked with
`skip`, 'skip_if', and `xfail` markers.
test.py uses `commitlog` directory instead of dtest's
`commitlogs`.
Remove test_stop_failure_policy test because the way how it
provoke commitlog failure (change file permission) doesn't
work on CI.
Enable the test in suite.yaml (run in dev mode only)
