these warnings are found by Clang-17 after removing
`-Wno-unused-lambda-capture` and '-Wno-unused-variable' from
the list of disabled warnings in `configure.py`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Refs #11710
Allows reusing regex for segment matching (for opening left-over segments after crash).
Should remove any stalls caused by commitlog replay preparation.
v2: Add unit test for descriptor parsing
Closes#12112
We currently have two method families to generate partition keys:
* make_keys() in test/lib/simple_schema.hh
* token_generation_for_shard() in test/lib/sstable_utils.hh
Both work only for schemas with a single partition key column of `text` type and both generate keys of fixed size.
This is very restrictive and simplistic. Tests, which wanted anything more complicated than that had to rely on open-coded key generation.
Also, many tests started to rely on the simplistic nature of these keys, in particular two tests started failing because the new key generation method generated keys of varying size:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same size. This makes some sense in the case of the key count estimation test, but makes no sense at all to me in the case of the sstable run test.
Closes#12657
* github.com:scylladb/scylladb:
test/lib/sstable_utils: remove now unused token_generation_for_shard() and friends
test/lib/simple_schema: remove now unused make_keys() and friends
test: migrate to tests::generate_partition_key[s]()
test/lib/test_services: add table_for_tests::make_default_schema()
test/lib: add key_utils.hh
test/lib/random_schema.hh: value_generator: add min_size_in_bytes
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Use the newly introduced key generation facilities, instead of the the
old inflexible alternatives and hand-rolled code.
Most of the migrations are mechanic, but there are two tests that
were tricky to migrate:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same
size. This makes some sense in the case of the key count estimation
test, but makes no sense at all to me in the case of the sstable run
test.
active_memtable() was fine to a single group, but with multiple groups,
there will be one active memtable per group. Let's change the
interface to reflect that.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Define table_id as a distinct utils::tagged_uuid modeled after raft
tagged_id, so it can be differentiated from other uuid-class types,
in particular from table_schema_version.
Fixes#11207
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Fixes#9367
The CL counters pending_allocations and requests_blocked_memory are
exposed in graphana (etc) and often referred to as metrics on whether
we are blocking on commit log. But they don't really show this, as
they only measure whether or not we are blocked on the memory bandwidth
semaphore that provides rate back pressure (fixed num bytes/s - sortof).
However, actual tasks in allocation or segment wait is not exposed, so
if we are blocked on disk IO or waiting for segments to become available,
we have no visible metrics.
While the "old" counters certainly are valid, I have yet to ever see them
be non-zero in modern life.
Closes#9368
We don't need the database to determine the shard of the mutation,
only its schema. So move the implementation to the respecive
definitions of mutation and frozen_mutation.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closes#10430
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
If we get errors/exceptions in delete_segments we can (and probably will) loose track of disk footprint counters. This can in turn, if using hard limits, cause us to block indefinitely on segment allocation since we might think we have larger footprint than we actually do.
Of course, if we actually fail deleting a segment, it is 100% true that we still technically hold this disk footprint (now unreachable), but for cases where for example outside forces (or wacky tests) delete a file behind our backs, this might not be true. One could also argue that our footprint is the segments and file names we keep track of, and the rest is exterior sludge.
In any case, if we have any exceptions in delete_segments, we should recalculate disk footprint based on current state, and restart all new_segment paths etc.
Fixes#9348
(Note: this is based on previous PR #9344 - so shows these commits as well. Actual changes are only the latter two).
Closes#9349
* github.com:scylladb/scylla:
commitlog: Recalculate footprint on delete_segment exceptions
commitlog_test: Add test for exception in alloc w. deleted underlying file
commitlog: Ensure failed-to-create-segment is re-deleted
commitlog::allocate_segment_ex: Don't re-throw out of function
Fixes#9348
If we get exceptions in delete_segments, we can, and probably will, loose
track of footprint counters. We need to recompute the used disk footprint,
otherwise we will flush too often, and even block indefinately on new_seg
iff using hard limits.
Tests that we can handle exception-in-alloc cleanup if the file actually
does not exist. This however uncovers another weakness (addressed in next
patch) - that we can loose track of disk footprint here, and w. hard limits
end up waiting for disk space that never comes. Thus test does not use hard
limit.
Fixes#9343
If we fail in allocate_segment_ex, we should push the file opened/created
to the delete set to ensure we reclaim the disk space. We should also
ensure that if we did not recycle a file in delete_segments, we still
wake up any recycle waiters iff we made a file delete instead.
Included a small unit test.
Refs #7794
Iff we need to pre-fill segment file ni O_DSYNC mode, we should
drop this for the pre-fill, to avoid issuing flushes until the file
is filled. Done by temporarily closing, re-opening in "normal" mode,
filling, then re-opening.
v2:
* More comment
v3:
* Add missing flush
v4:
* comment
v5:
* Split coroutine and fix into separate patches
commitlog was changed to use fragmented_temporary_buffer::ostream (db::commitlog::output).
So if there are discontiguous small memory blocks, they can be used to satisfy
an allocation even if no contiguous memory blocks are available.
To prevent that, as Avi suggested, this change allocates in 128K blocks
and frees the last one to succeed (so that we won't fail on allocating continuations).
Fixes#8028
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20210203100333.862036-1-bhalevy@scylladb.com>
seastar::make_lw_shared has a constructor taking a T&&. There is no
such constructor in std::make_shared:
https://en.cppreference.com/w/cpp/memory/shared_ptr/make_shared
This means that we have to move from
make_lw_shared(T(...)
to
make_lw_shared<T>(...)
If we don't want to depend on the idiosyncrasies of
seastar::make_lw_shared.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
All reader are soon going to require a valid permit, so make sure we
have a valid permit which we can pass to the delegate reader when
creating it. This means `memtable::make_flat_reader()` now also requires
a permit to be passed to it.
Internally the permit is stored in `scanning_reader`, which is used both
for flushes and normal reads. In the former case a permit is not
required.
When replaying the commitlog, pass keys to
`validation::validate_cql_key()`. Discard entries which fail validation
and warn about it in the logs.
This prevents invalid keys from getting into the system, possibly
failing the commitlog replay and the successful boot of the node,
preventing the node from recovering data.
Fixes#6195
test_commitlog_delete_when_over_disk_limit reads current segment list
in flush handler, to compare with result after allowing deletetion of
segement. However, it might be called more than once in rare cases,
because timing and us using rather small sizes.
Reading the list the second time however is not a good idea, because
it might just very well be exactly the same as what we read in the
test check code, and we actually overwrite the list we want to
check against. Because callback is on timer. And test is not.
Message-Id: <20200414114322.13268-1-calle@scylladb.com>
This removes the need to include reactor.hh, a source of compile
time bloat.
In some places, the call is qualified with seastar:: in order
to resolve ambiguities with a local name.
Includes are adjusted to make everything compile. We end up
having 14 translation units including reactor.hh, primarily for
deprecated things like reactor::at_exit().
Ref #1
Fixes#5899
When terminating (closing) a segment, we write a trailing block
of zero so reader can have an empty region after last used chunk
as end marker. This is due to using recycled, pre-allocated
segments with potentially non-zero data extending over the point
where we are ending the segment (i.e. we are not fully filling
the segment due to a huge mutation or similar).
However, if we reach end of segment writing the final block
(typically many small mutations), the file will end naturally
after the data written, and any trailing zero block would in fact
just extend the file further. While this will only happen once per
segment recycled (independent on how many times it is recycled),
it is still both slightly breaking the disk usage contract and
also potentially causing some disk stalls due to metadata changes
(though of course very infrequent).
We should only write trailing zero if we are below the max_size
file size when terminating
Adds a small size check to commitlog test to verify size bounds.
(Which breaks without the patch)
v2:
- Fix test to take into account that files might be deleted
behind our backs.
v3:
- Fix test better, by doing verification _before_ segments are
queued for delete.
Message-Id: <20200226121601.15347-2-calle@scylladb.com>
Message-Id: <20200324100235.23982-1-calle@scylladb.com>
This reverts commit 0b34d88957. According
to Rafael Avila de Espindola:
"I have bisected the recent failures [in commitlog_test] on next to this
patch."
Fixes#5899
When terminating (closing) a segment, we write a trailing block
of zero so reader can have an empty region after last used chunk
as end marker. This is due to using recycled, pre-allocated
segments with potentially non-zero data extending over the point
where we are ending the segment (i.e. we are not fully filling
the segment due to a huge mutation or similar).
However, if we reach end of segment writing the final block
(typically many small mutations), the file will end naturally
after the data written, and any trailing zero block would in fact
just extend the file further. While this will only happen once per
segment recycled (independent on how many times it is recycled),
it is still both slightly breaking the disk usage contract and
also potentially causing some disk stalls due to metadata changes
(though of course very infrequent).
We should only write trailing zero if we are below the max_size
file size when terminating
Adds a small size check to commitlog test to verify size bounds.
(Which breaks without the patch)
Message-Id: <20200226121601.15347-2-calle@scylladb.com>
1. Move tests to test (using singular seems to be a convention
in the rest of the code base)
2. Move boost tests to test/boost, other
(non-boost) unit tests to test/unit, tests which are
expected to be run manually to test/manual.
Update configure.py and test.py with new paths to tests.
