So tombstones can be purged correctly based on the tombstone gc mode.
Currently if repair-mode is used, tombstones are not purged at all,
which can lead to purged tombstone being re-replicated to replicas which
already purged them via read-repair.
This is not a correctness problem, tombstones are not included in data
query resutl or digest, these purgable tombstone are only a nuissance
for read repair, where they can create extra differences between
replicas. Note that for the read repair to trigger, some difference
other than in purgable tombstones has to exist, because as mentioned
above, these are not included in digets.
Fixes: scylladb/scylladb#24332Closesscylladb/scylladb#26351
The query namespace is used for symbols which span the coordinator and
replica, or that are mostly coordinator side. The querier is mainly in
this namespace due to its similar name, but this is a mistake which
confuses people. Now that the code was moved to replica/, also fix the
namespace to be namespace replica.
The querier object is a confusing one. Based on its name it should be in
the query/ module and it is already in the query namespace. But this is
actually a completely replica-side logic, implementing the caching of
the readers on the replica. Move it to the replica module to make this
more clear.
set_notify_handler() is called after a querier was inserted into the
querier cache. It has two purposes: set a callback for eviction and set
a TTL for the cache entry. This latter was not disabling the
pre-existing timeout of the permit (if any) and this would lead to
premature eviction of the cache entry if the timeout was shorter than
TTL (which his typical).
Disable the timeout before setting the TTL to prevent premature
eviction.
Fixes: #scylladb/scylladb#22629
To reduce test executable size and speed up compilation time, compile unit
tests into a single executable.
Here is a file size comparison of the unit test executable:
- Before applying the patch
$ du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
11G build/release/test/boost/
29G build/debug/test/boost/
- After applying the patch
du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
5.5G build/release/test/boost/
19G build/debug/test/boost/
It reduces executable sizes 5.5GB on release, and 10GB on debug.
Closes#9155Closesscylladb/scylladb#21443
Using the standard library is preffered over boost.
In cql3/expr/expression.cc to_sorted_vector got more of a
face-list and was modernized to use also std::unique
and while at it, to move its input range in the uniquely sorted
result vector.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
flat_mutation_reader_v2 was introduced in a pair of commits in 2021:
e3309322c3 "Clone flat_mutation_reader related classes into v2 variants"
08b5773c12 "Adapt flat_mutation_reader_v2 to the new version of the API"
as a replacement for flat_mutation_reader, using range_tombstone_change
instead of range_tombstone to represent represent range tombstones. See
those commits for more information.
The transition was incremental; the last use of the original
flat_mutation_reader was removed in 2022 in commit
026f8cc1e7 "db: Use mutation_partition_v2 in mvcc"
In turn, flat_mutation_reader was introduced in 2017 in commit
748205ca75 "Introduce flat_mutation_reader"
To transition from a mutation_reader that nested rows within
a partition in a separate stream, to a flat reader that streamed
partitions and rows in the same stream.
Here, we reclaim the original name and rename the awkward
flat_mutation_reader_v2 to mutation_reader.
Note that mutation_fragment_v2 remains since we still use the original
for compatibilty, sometimes.
Some notes about the transition:
- files were also renamed. In one case (flat_mutation_reader_test.cc), the
rename target already existed, so we rename to
mutation_reader_another_test.cc.
- a namespace 'mutation_reader' with two definitions existed (in
mutation_reader_fwd.hh). Its contents was folded into the mutation_reader
class. As a result, a few #includes had to be adjusted.
Closesscylladb/scylladb#19356
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
range.hh was deprecated in bd794629f9 (2020) since its names
conflict with the C++ library concept of an iterator range. The name
::range also mapped to the dangerous wrapping_interval rather than
nonwrapping_interval.
Complete the deprecation by removing range.hh and replacing all the
aliases by the names they point to from the interval library. Note
this now exposes uses of wrapping intervals as they are now explicit.
The unit tests are renamed and range.hh is deleted.
Closesscylladb/scylladb#17428
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Store schema_ptr in reader permit instead of storing a const pointer to
schema to ensure that the schema doesn't get changed elsewhere when the
permit is holding on to it. Also update the constructors and all the
relevant callers to pass down schema_ptr instead of a raw pointer.
Fixes#16180
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#16658
To be used in the next patch to control whether the semaphore registers
and exports metrics or not. We want to move metric registration to the
semaphore but we don't want all semaphores to export metrics. The
decision on whether a semaphore should or shouldn't export metrics
should be made on a case-by-case basis so this new parameter has no
default value (except for the for_tests constructor).
Also rephase the messages a bit so they are more uniform.
The goal of this change is to make semaphore mismatches easier to
diagnose, by including the table name and the permit name in the
printout.
While at it, add a test for semaphore mismatch, it didn't have one.
Refs: #15485Closesscylladb/scylladb#15508
Same as in previous patch, the cql_test_env::require_table_exists()
helper is exactly the same, but returns future and asserts on failures
for no gain
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Previously semaphore mismatch was checked only in multi-partition
queries and if happened, an internal error was thrown.
This commit pushed the check down to `querier_cache`, so each
`lookup_*_querier` method will check for the mismatch.
What's more, if semaphore mismatch occurs, check whether both semaphores belong
to user. If so, log a warning and drop cached reader instead of
throwing an error.
The mismatch can happen if user's scheduling group changed during
a query. We don't want to throw an error then, but drop and reset
cached reader.
In that level no io_priority_class-es exist. Instead, all the IO happens
in the context of current sched-group. File API no longer accepts prio
class argument (and makes io_intent arg mandatory to impls).
So the change consists of
- removing all usage of io_priority_class
- patching file_impl's inheritants to updated API
- priority manager goes away altogether
- IO bandwidth update is performed on respective sched group
- tune-up scylla-gdb.py io_queues command
The first change is huge and was made semi-autimatically by:
- grep io_priority_class | default_priority_class
- remove all calls, found methods' args and class' fields
Patching file_impl-s is smaller, but also mechanical:
- replace io_priority_class& argument with io_intent* one
- pass intent to lower file (if applicatble)
Dropping the priority manager is:
- git-rm .cc and .hh
- sed out all the #include-s
- fix configure.py and cmakefile
The scylla-gdb.py update is a bit hairry -- it needs to use task queues
list for IO classes names and shares, but to detect it should it checks
for the "commitlog" group is present.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13963
As described in https://github.com/scylladb/scylladb/issues/8638,
we're moving away from `SimpleStrategy`, in the future
it will become deprecated.
We should remove all uses of it and replace them
with `NetworkTopologyStrategy`.
This change replaces `SimpleStrategy` with
`NetworkTopologyStrategy` in all unit tests,
or at least in the ones where it was reasonable to do so.
Some of the tests were written explicitly to test the
`SimpleStrategy` strategy, or changing the keyspace from
`SimpleStrategy` to `NetworkTopologyStrategy`.
These tests were left intact.
It's still a feature that is supported,
even if it's slowly getting deprecated.
The typical way to use `NetworkTopologyStrategy` is
to specify a replication factor for each datacenter.
This could be a bit cumbersome, we would have to fetch
the list of datacenters, set the repfactors, etc.
Luckily there is another way - we can just specify
a replication factor to use for or each existing
datacenter, like this:
```cql
CREATE KEYSPACE {} WITH REPLICATION =
{'class' : 'NetworkTopologyStrategy', 'replication_factor' : 1};
```
This makes the change rather straightforward - just replace all
instances of `'SimpleStrategy'', with `'NetworkTopologyStrategy'`.
Refs: https://github.com/scylladb/scylladb/issues/8638
Signed-off-by: Jan Ciolek <jan.ciolek@scylladb.com>
Closes#13990
Into reset_to() and reset_to_zero(). The latter replaces `reset()` with
the default 0 resources argument, which was often called from noexcept
contexts. Splitting it out from `reset()` allows for a specialized
implementation that is guaranteed to be `noexcept` indeed and thus
peace of mind.
The forward_service.hh and raft_group0_client.hh can be replaced with
forward declarations. Few other files need their previously indirectly
included headers back.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13384
And propagate it down to where it is created. This will be used to add
trace points for semaphore related events, but this will come in the
next patches.
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
These methods will soon be retired (made private) so migrate away from
them. Consume memory through a permit instead. It is also safer this
way: all memory consumed through the permit is guaranteed to be released
when the permit is destroyed at the latest.
It is not type safe: has multiple limits passed to it as raw ints, as
well as other types that ints implicitly convert to. Furthermore the row
limit is passed in two separate fields (lower 32 bits and upper 32
bits). All this make this constructor a minefield for humans to use. We
have a safer constructor for some time but some users of the old one
remain. Move them to the safe one.
Soon, the currently two distinct types of queriers will be merged, as
the template parameter differentiating them will be gone. This will make
using type based overload for insert() impossible, as 2 out of the 3
types will be the same. Use different names instead.
"
Namely the query result writer and the reconcilable result builder, used
for building results for regular queries and mutation queries (used in
read repair) respectively.
With this, there are no users left for the v1 output of the compactor,
so we remove that, making the compactor v2 all-the-way (and simpler).
This means that for regular queries, a downgrade phase is eliminated
completely, as regular queries don't store range tombstone in their
result, so no need to convert them.
Tests: unit(dev, release, debug)
"
* 'result-builders-v2/v1' of https://github.com/denesb/scylla:
reconcilable_result_builder: remove v1 support
query_result_builder: remove v1 support
mutation_compactor: drop v1 related code-paths
mutation_compactor: drop v1 support altogether from the API
tree: migrate to the v2 consumer APIs
test/boost/mutation_test: remove v1 specific test code
querier: switch to v2 compactor output
reconcilable_result_builder: add v2 support
query_result_writer: add v2 support
query_result_builder: make consume(range_tombstone) noop
The flat_mutation_reader files were conflated and contained multiple
readers, which were not strictly necessary. Splitting optimizes both
iterative compilation times, as touching rarely used readers doesn't
recompile large chunks of codebase. Total compilation times are also
improved, as the size of flat_mutation_reader.hh and
flat_mutation_reader_v2.hh have been reduced and those files are
included by many file in the codebase.
With changes
real 29m14.051s
user 168m39.071s
sys 5m13.443s
Without changes
real 30m36.203s
user 175m43.354s
sys 5m26.376s
Closes#10194
The change is mostly mechanical: update all compactor instances to the
_v2 variant and update all call-sites, of which there is not that many.
As a consequence of this patch, queries -- both single-partition and
range-scans -- now do the v2->v1 conversion in the consumers, instead of
in the compactor.
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Move replica-oriented classes to the replica namespace. The main
classes moved are ::database, ::keyspace, and ::table, but a few
ancillary classes are also moved. There are certainly classes that
should be moved but aren't (like distributed_loader) but we have
to start somewhere.
References are adjusted treewide. In many cases, it is obvious that
a call site should not access the replica (but the data_dictionary
instead), but that is left for separate work.
scylla-gdb.py is adjusted to look for both the new and old names.
Add schema parameter so that:
* Caller has better control over schema -- especially relevant for
reverse reads where it is not possible to follow the convention of
passing the query schema which is reversed compared to that of the
mutations.
* Now that we don't depend on the mutations for the schema, we can lift
the restriction on mutations not being empty: this leads to safer
code. When the mutations parameter is empty, an empty reader is
created.
Add "make_" prefix to follow convention of similar reader factory
functions.
Tests: unit(dev)
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <20211115155614.363663-1-bdenes@scylladb.com>
It's easy to forget about supplying the correct value for a parameter
when it has a default value specified. It's safer if 'production code'
is forced to always supply these parameters manually.
The default values were mostly useful in tests, where some parameters
didn't matter that much and where the majority of uses of the class are.
Without default values adding a new parameter is a pain, forcing one to
modify every usage in the tests - and there are a bunch of them. To
solve this, we introduce a new constructor which requires passing the
`for_tests` tag, marking that the constructor is only supposed to be
used in tests (and the constructor has an appropriate comment). This
constructor uses default values, but the other constructors - used in
'production code' - do not.
