Currently, if a new sstable is created during repair/streaming,
we invalidate its whole token range in cache. If the sstable
is sparse, we unnecessarily clear too much data.
Modify cache invalidation, so that only the partitions present
in the sstable are cleared.
To check whether a partition is present in the sstable, we use bloom
filters. Bloom filters may return false positives and show that
an sstable contains a partition, even though it does not. Due to that
we may invalidate a bit more than we need to, but the cache will be
in valid state.
An issue arises when we do not invalidate two consecutive partitions
that are continuous. The sstable may contain a token that falls
between these partitions, breaking the continuity. To check that, we
would need to scan sstable index. However, such a change would
noticeably complicate the invalidation, both performance and code.
In this change, sstable index reader isn't used. Instead, the continuity
flag is unset for all scanned partitions. This comes at a cost of
heavier reads, as we will need to verify continuity when reading more
than one partition from cache.
Fixes: https://github.com/scylladb/scylladb/issues/9136.
Closesscylladb/scylladb#25996
Instead of storing it partially in tombstone_gc and partially in an
external map. Move all external parts into the new
shared_tombstone_gc_state. This new class is responsible for
keeping and updating the repair history. tombstone_gc_state just keeps
const pointers to the shared state as before and is only responsible for
querying the tombstone gc before times.
This separation makes the code easier to follow and also enables further
patching of tombstone_gc_state.
This test currently uses gc_grace_seconds=0. The introduction
of memtable overlap elision will break these tests because the
optimization is always active with this tombstone-gc.
Switch the tests to use tombstone-gc=repair, which allows for greater
control over when the memtable overlap elision is triggered.
This requires a move to vnodes, as tombstone-gc=repair doesn't
work with RF=1 currently, and using RF=3 won't work with tablets.
This test will soon need to be changed to use tombstone-gc=repair. This
cannot work as of now, as the test uses a single-node cluster.
The options are the following:
* Make it use more than one nodes
* Make repair work with single node clusters
* Rewrite in C++ where repair can be done synthetically
We chose the last option, it is the simplest one both in terms of code
and runtime footprint.
The new test is in test/boost/row_cache_test.cc
Two changes were done during the migration
* Change the name to
test_populating_reader_tombstone_gc_with_data_in_memtable
to better express which cache component this test is targetting;
* Use NullCompactionStrategy on the table instead of disabling
auto-compaction.
These tests currently use tombstone-gc=immediate. The introduction
of memtable overlap elision will break these tests because the
optimization is always active with this tombstone-gc.
Switch the tests to use tombstone-gc=repair, which allows for greater
control over when the memtable overlap elision is triggered.
This requires a move to vnodes, as tombstone-gc=repair doesn't
work with RF=1 currently, and using RF=3 won't work with tablets.
Make sure the keys are full prefixes as it is expected to be the case
for rows. At severeal occasions we have seen empty row keys make their
ways into the sstables, despite the fact that they are not allowed by
the CQL frontend. This means that such empty keys are possibly results
of memory corruption or use-after-{free,copy} errors. The source of the
corruption is impossible to pinpoint when the empty key is discovered in
the sstable. So this patch adds checks for such keys to places where
mutations are built: when building or unserializing mutations.
The test row_cache_test/test_reading_of_nonfull_keys needs adjustment to
work with the changes: it has to make the schema use compact storage,
otherwise the non-full changes used by this tests are rejected by the
new checks.
Fixes: https://github.com/scylladb/scylladb/issues/24506
The idea behind readers/ is that each reader has its minimal header with
just a factory method declaration. The delegating reader is defined in
the factory header because it has a derived class in row_cache_test.cc.
Move the definition to delegating_impl.hh so users not interested in
deriving from it don't pay the price in header include cost.
Similar to test/cluster/test_data_resurrection_in_memtable.py but works
on a single node and uses more low-level mechanism. These tests can also
reproduce more advanced scenarios, like concurrent reads, with some
reading from flushed memtables.
The cache should not garbage-collect tombstone which cover data in the
memtable. Add overlap checks (get_max_purgeable) to garbage collection
to detect tombstones which cover data in the memtable and to prevent
their garbage collection.
Following the recent refactoring of removing "flat" and "v2" from reader
names, replacing all the fully qualified names with simply "mutation_reader".
Closesscylladb/scylladb#23346
in order to reduce the external header dependency, let's switch to
the standardlized std::ranges::min_element().
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22572
To reduce test executable size and speed up compilation time, compile unit
tests into a single executable.
Here is a file size comparison of the unit test executable:
- Before applying the patch
$ du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
11G build/release/test/boost/
29G build/debug/test/boost/
- After applying the patch
du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
5.5G build/release/test/boost/
19G build/debug/test/boost/
It reduces executable sizes 5.5GB on release, and 10GB on debug.
Closes#9155Closesscylladb/scylladb#21443
Replace boost::make_iterator_range() with std::ranges::subrange.
This change improves code modernization and reduces external dependencies:
- Replace boost::make_iterator_range() with std::ranges::subrange
- Remove boost/range/iterator_range.hpp include
- Improve iterator type detection in interval.hh using std::ranges::const_iterator_t<Range>
This is part of ongoing efforts to modernize our codebase and minimize
external dependencies.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21787
now that we are allowed to use C++23. we now have the luxury of using
`std::ranges::any_of`.
in this change, we replace `boost::algorithm::any_of` with
`std::ranges::any_of`
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
before this change, we rely on `using namespace seastar` to use
`seastar::format()` without qualifying the `format()` with its
namespace. this works fine until we changed the parameter type
of format string `seastar::format()` from `const char*` to
`fmt::format_string<...>`. this change practically invited
`seastar::format()` to the club of `std::format()` and `fmt::format()`,
where all members accept a templated parameter as its `fmt`
parameter. and `seastar::format()` is not the best candidate anymore.
despite that argument-dependent lookup (ADT for short) favors the
function which is in the same namespace as its parameter, but
`using namespace` makes `seastar::format()` more competitive,
so both `std::format()` and `seastar::format()` are considered
as the condidates.
that is what is happening scylladb in quite a few caller sites of
`format()`, hence ADT is not able to tell which function the winner
in the name lookup:
```
/__w/scylladb/scylladb/mutation/mutation_fragment_stream_validator.cc:265:12: error: call to 'format' is ambiguous
265 | return format("{} ({}.{} {})", _name_view, s.ks_name(), s.cf_name(), s.id());
| ^~~~~~
/usr/bin/../lib/gcc/x86_64-redhat-linux/14/../../../../include/c++/14/format:4290:5: note: candidate function [with _Args = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
4290 | format(format_string<_Args...> __fmt, _Args&&... __args)
| ^
/__w/scylladb/scylladb/seastar/include/seastar/core/print.hh:143:1: note: candidate function [with A = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
143 | format(fmt::format_string<A...> fmt, A&&... a) {
| ^
```
in this change, we
change all `format()` to either `fmt::format()` or `seastar::format()`
with following rules:
- if the caller expects an `sstring` or `std::string_view`, change to
`seastar::format()`
- if the caller expects an `std::string`, change to `fmt::format()`.
because, `sstring::operator std::basic_string` would incur a deep
copy.
we will need another change to enable scylladb to compile with the
latest seastar. namely, to pass the format string as a templated
parameter down to helper functions which format their parameters.
to miminize the scope of this change, let's include that change when
bumping up the seastar submodule. as that change will depend on
the seastar change.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
The reconcilable_result is built as it would be constructed for
forward read queries for tables with reversed order.
Mutations constructed for reversed queries are consumed forward.
Drop overloaded reversed functions that reverse read_command and
reconcilable_result directly and keep only those requiring smart
pointers. They are not used any more.
assert() is traditionally disabled in release builds, but not in
scylladb. This hasn't caused problems so far, but the latest abseil
release includes a commit [1] that causes a 1000 insn/op regression when
NDEBUG is not defined.
Clearly, we must move towards a build system where NDEBUG is defined in
release builds. But we can't just define it blindly without vetting
all the assert() calls, as some were written with the expectation that
they are enabled in release mode.
To solve the conundrum, change all assert() calls to a new SCYLLA_ASSERT()
macro in utils/assert.hh. This macro is always defined and is not conditional
on NDEBUG, so we can later (after vetting Seastar) enable NDEBUG in release
mode.
[1] 66ef711d68Closesscylladb/scylladb#20006
flat_mutation_reader_v2 was introduced in a pair of commits in 2021:
e3309322c3 "Clone flat_mutation_reader related classes into v2 variants"
08b5773c12 "Adapt flat_mutation_reader_v2 to the new version of the API"
as a replacement for flat_mutation_reader, using range_tombstone_change
instead of range_tombstone to represent represent range tombstones. See
those commits for more information.
The transition was incremental; the last use of the original
flat_mutation_reader was removed in 2022 in commit
026f8cc1e7 "db: Use mutation_partition_v2 in mvcc"
In turn, flat_mutation_reader was introduced in 2017 in commit
748205ca75 "Introduce flat_mutation_reader"
To transition from a mutation_reader that nested rows within
a partition in a separate stream, to a flat reader that streamed
partitions and rows in the same stream.
Here, we reclaim the original name and rename the awkward
flat_mutation_reader_v2 to mutation_reader.
Note that mutation_fragment_v2 remains since we still use the original
for compatibilty, sometimes.
Some notes about the transition:
- files were also renamed. In one case (flat_mutation_reader_test.cc), the
rename target already existed, so we rename to
mutation_reader_another_test.cc.
- a namespace 'mutation_reader' with two definitions existed (in
mutation_reader_fwd.hh). Its contents was folded into the mutation_reader
class. As a result, a few #includes had to be adjusted.
Closesscylladb/scylladb#19356
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
In test_exception_safety_of_update_from_memtable, we have a potential
throw from external_updater.
external_updater is supposed to be infallible.
Scylla currently aborts when an external_updater throws, so a throw from
there just fails the test.
This isn't intended. We aren't testing external_updater in this test.
Fixes#18163Closesscylladb/scylladb#18171
Calling `_next_row.get_iterator_in_latest()` is illegal when `_next_row` is not
pointing at a row. In particular, the iterator returned by such call might be
dangling.
We have observed this to cause a use-after-free in the field, when a reverse
read called `maybe_add_to_cache` after `_latest_it` was left dangling after
a dead row removal in `copy_from_cache_to_buffer`.
To fix this, we should ensure that we only call `_next_row.get_iterator_in_latest`
is pointing at a row.
Only the occurrences of this problem in `maybe_add_to_cache` are truly dangerous.
As far as I can see, other occurrences can't break anything as of now.
But we apply fixes to them anyway.
Closesscylladb/scylladb#18046
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Store schema_ptr in reader permit instead of storing a const pointer to
schema to ensure that the schema doesn't get changed elsewhere when the
permit is holding on to it. Also update the constructors and all the
relevant callers to pass down schema_ptr instead of a raw pointer.
Fixes#16180
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#16658
To be used in the next patch to control whether the semaphore registers
and exports metrics or not. We want to move metric registration to the
semaphore but we don't want all semaphores to export metrics. The
decision on whether a semaphore should or shouldn't export metrics
should be made on a case-by-case basis so this new parameter has no
default value (except for the for_tests constructor).
There's one in the utils that creates lw_shared_ptr<memtable> and
applies provided vector of mutations into it. Lots of other test cases
do literally the same by hand.
The make_memtable() assumes that the caller is sitting in the seastar
thread, and all the test cases that can benfit from it already are.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Consider the following code snippet:
```c++
future<> foo() {
semaphore.consume(1024);
}
future<> bar() {
return _allocating_section([&] {
foo();
});
}
```
If the consumed memory triggers the OOM kill limit, the semaphore will throw `std::bad_alloc`. The allocating section will catch this, bump std reserves and retry the lambda. Bumping the reserves will not do anything to prevent the next call to `consume()` from triggering the kill limit. So this cycle will repeat until std reserves are so large that ensuring the reserve fails. At this point LSA gives up and re-throws the `std::bad_alloc`. Beyond the useless time spent on code that is doomed to fail, this also results in expensive LSA compaction and eviction of the cache (while trying to ensure reserves).
Prevent this situation by throwing a distinct exception type which is derived from `std::bad_alloc`. Allocating section will not retry on seeing this exception.
A test reproducing the bug is also added.
Fixes: #15278Closesscylladb/scylladb#15581
* github.com:scylladb/scylladb:
test/boost/row_cache_test: add test_cache_reader_semaphore_oom_kill
utils/logalloc: handle utils::memory_limit_reached in with_reclaiming_disabled()
reader_concurrency_semaphore: use utils::memory_limit_reached exception
utils: add memory_limit_reached exception
The test does (among other things) the following:
1. Create a cache reader with buffer of size 1 and fill the buffer.
2. Update the cache.
3. Check that the reader produces the first mutation as seen before
the update (because the buffer fill should have snapshotted the first
mutation), and produces other mutation as seen after the update.
However, the test is not guaranteed to stop after the update succeeds.
Even during a successful update, an allocation might have failed
(and been retried by an allocation_section), which will cause the
body of with_allocation_failures to run again. On subsequent runs
the last check (the "3." above) fails, because the first mutation
is snapshotted already with the new version.
Fix that.
Closesscylladb/scylladb#15634
Check that the cache reader reacts correctly to semaphore's OOM kill
attempt, letting the read to fail, instead of going berserk, trying to
reserve more-and-more memory, until the reserve cannot be satisfied.
Same as in previous patch, the cql_test_env::require_table_exists()
helper is exactly the same, but returns future and asserts on failures
for no gain
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
In the next commit, we remove the default value for the
description parameter of migration_manager::announce to avoid
using it in the future. However, many calls to announce in tests
use the default value. We have to change it, but we don't really
care about descriptions in the tests, so we pass the empty string
everywhere.
The migration_manager service is responsible for schema convergence
in the cluster - pushing schema changes to other nodes and pulling
schema when a version mismatch is observed. However, there is also
a part of migration_manager that doesn't really belong there -
creating mutations for schema updates. These are the functions with
prepare_ prefix. They don't modify any state and don't exchange any
messages. They only need to read the local database.
We take these functions out of migration_manager and make them
separate functions to reduce the dependency of other modules
(especially query_processor and CQL statements) on
migration_manager. Since all of these functions only need access
to storage_proxy (or even only replica::database), doing such a
refactor is not complicated. We just have to add one parameter,
either storage_proxy or database and both of them are easily
accessible in the places where these functions are called.
test.py with --x-log2-compaction-groups option rotted a little bit.
Some boost tests added later didn't use the correct header which
parses the option or they didn't adjust suite.yaml.
Perhaps it's time to set up a weekly (or bi-weekly) job to verify
there are no regressions with it. It's important as it stresses
the data plane for tablets reusing the existing tests available.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closes#14732
