Some files in compaction/ have using namespace {compaction,sstables}
clauses, some even in headers. This is considered bad practice and
muddies the namespace use. Remove them.
The namespace usage in this directory is very inconsistent, with files
and classes scattered in:
* global namespace
* namespace compaction
* namespace sstables
With cases, where all three used in the same file. This code used to
live in sstables/ and some of it still retains namespace sstables as a
heritage of that time. The mismatch between the dir (future module) and
the namespace used is confusing, so finish the migration and move all
code in compaction/ to namespace compaction too.
This patch, although large, is mechanic and only the following kind of
changes are made:
* replace namespace sstable {} with namespace compaction {}
* add namespace compaction {}
* drop/add sstables::
* drop/add compaction::
* move around forward-declarations so they are in the correct namespace
context
This refactoring revealed some awkward leftover coupling between
sstables and compaction, in sstables/sstable_set.cc, where the
make_sstable_set() methods of compaction strategies are implemented.
The latter is recommended in seastar, and the former was left as
compatibility alias. Latest seastar explicitly marks it as deprecated so
once the submodule is updated, compilation logs will explode.
Most of the patch is generated with
for f in $(git grep -l '\<distributed<[A-Za-z0-9:_]*>') ; do sed -e 's/\<distributed<\([A-Za-z0-9:_]*\)>/sharded<\1>/g' -i $f; done
for f in $(git grep -l distributed.hh); do sed -e 's/distributed.hh/sharded.hh/' -i $f ; done
and a small manual change in test/perf/perf.hh
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26136
As requested in #22099, moved the files and fixed other includes and build system.
Moved files:
- cache_temperature.hh
- cell_locking.hh
Fixes: #22099Closesscylladb/scylladb#25079
Since table_state is a view to a compaction group, it makes sense
to rename it as so.
With upcoming incremental repair, each replica::compaction_group
will be actually two compaction groups, so there will be two
views for each replica::compaction_group.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
In next patches, make_sstable_compressor_factory() will have to
disappear.
In preparation for that, we switch to a seastar::thread-dependent
replacement.
Interval map is very susceptible to quadratic space behavior when
it's flooded with many entries overlapping all (or most of)
intervals, since each such entry will have presence on all
intervals it overlaps with.
A trigger we observed was memtable flush storm, which creates many
small "L0" sstables that spans roughly the entire token range.
Since we cannot rely on insertion order, solution will be about
storing sstables with such wide ranges in a vector (unleveled).
There should be no consequence for single-key reads, since upper
layer applies an additional filtering based on token of key being
queried.
And for range scans, there can be an increase in memory usage,
but not significant because the sstables span an wide range and
would have been selected in the combined reader if the range of
scan overlaps with them.
Anyway, this is a protection against storm of memtable flushes
and shouldn't be the common scenario.
It works both with tablets and vnodes, by adjusting the token
range spanned by compaction group accordingly.
Fixes#23634.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
This commit eliminates unused boost header includes from the tree.
Removing these unnecessary includes reduces dependencies on the
external Boost.Adapters library, leading to faster compile times
and a slightly cleaner codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22857
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
"crawling" is a little bit obscure in this context. so let's rename this
class to reflect the fact that this reader only reads the entire content
of the sstable.
both crawling reader for kl and mx formats are renamed. also, in order
to be consistent, all "crawling reader" in variable names are updated
as well.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Everything, but perf test is straightforward switch.
The perf-test generated regular columns dynamically via vector, with
builder the vector goes away.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
for testing the load performance of load_and_stream operation.
Refs #19989
---
no need to backport. it adds two new tests to the existing `perf_sstable` tool for evaluating the load performance when performing the "load_and_streaming" operation. hence has no impact on the production.
Closesscylladb/scylladb#20186
* github.com:scylladb/scylladb:
perf/perf_sstable: add {crawling,partitioned}_streaming modes
test/perf/perf_sstable: use switch-case when appropriate
before this change, we use the default options when creating `test_env`,
and the default options enable `use_uuid`. but the modes of
`perf-sstables` involving reads assumes that the identifiers are
deterministic. so that the previously written sstables using the "write"
mode can be read with the modes like "index_read", which just uses
`test_env::make_sstable()` in `load_sstables()`, and under the hood,
`test_env::make_sstable()` uses `test_env::new_generation()` for
retrieving the next identifier of sstable. when using integer-base
identifier, this works. as the sstable identifiers are generated
from a monotonically increasing integer sequence, where the identifiers
are deterministic. but this does not apply anymore when the UUID-based
identifiers are used, as the identifiers are generated with a
pseudorandom generator of UUID v1.
in this change, to avoid relying on the determinism of the integer-based
sstable identifier generation, we enumerate sstables by listing the
given directory, and parse the path for their identifier.
after this change, we are able to support the UUID-based sstable
identifier.
another option is disable the UUID-based sstable identifier when
loading sstables. the upside is that this approach is minimal and
straightforward. but the downside is that it encodes the assumption
in the algorithm implicitly, and could be confusing -- we create
a new generation for loading an existing sstable with this generation.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20183
assert() is traditionally disabled in release builds, but not in
scylladb. This hasn't caused problems so far, but the latest abseil
release includes a commit [1] that causes a 1000 insn/op regression when
NDEBUG is not defined.
Clearly, we must move towards a build system where NDEBUG is defined in
release builds. But we can't just define it blindly without vetting
all the assert() calls, as some were written with the expectation that
they are enabled in release mode.
To solve the conundrum, change all assert() calls to a new SCYLLA_ASSERT()
macro in utils/assert.hh. This macro is always defined and is not conditional
on NDEBUG, so we can later (after vetting Seastar) enable NDEBUG in release
mode.
[1] 66ef711d68Closesscylladb/scylladb#20006
flat_mutation_reader_v2 was introduced in a pair of commits in 2021:
e3309322c3 "Clone flat_mutation_reader related classes into v2 variants"
08b5773c12 "Adapt flat_mutation_reader_v2 to the new version of the API"
as a replacement for flat_mutation_reader, using range_tombstone_change
instead of range_tombstone to represent represent range tombstones. See
those commits for more information.
The transition was incremental; the last use of the original
flat_mutation_reader was removed in 2022 in commit
026f8cc1e7 "db: Use mutation_partition_v2 in mvcc"
In turn, flat_mutation_reader was introduced in 2017 in commit
748205ca75 "Introduce flat_mutation_reader"
To transition from a mutation_reader that nested rows within
a partition in a separate stream, to a flat reader that streamed
partitions and rows in the same stream.
Here, we reclaim the original name and rename the awkward
flat_mutation_reader_v2 to mutation_reader.
Note that mutation_fragment_v2 remains since we still use the original
for compatibilty, sometimes.
Some notes about the transition:
- files were also renamed. In one case (flat_mutation_reader_test.cc), the
rename target already existed, so we rename to
mutation_reader_another_test.cc.
- a namespace 'mutation_reader' with two definitions existed (in
mutation_reader_fwd.hh). Its contents was folded into the mutation_reader
class. As a result, a few #includes had to be adjusted.
Closesscylladb/scylladb#19356
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
The wrapper just calls the test-only core write_memtable_to_sstable()
overload, tests can do it on their own.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
default_compaction_progress_monitor returns a reference to a static
object. So, it should be read-only, but its users need to modify it.
Delete default_compaction_progress_monitor and use one's own
compaction_progress_monitor instance where it's needed.
Closesscylladb/scylladb#15800
We want to switch system.scylla_local table to the
schema commitlog, but load phases hamper here - schema
commitlog is initialized after phase1,
so a table which is using it should be moved to phase2,
but system.scylla_local contains features, and we need
them before schema commitlog initialization for
SCHEMA_COMMITLOG feature.
In this commit we are taking a different approach to
loading system tables. First, we load them all in
one pass in 'readonly' mode. In this mode, the table
cannot be written to and has not yet been assigned
a commit log. To achieve this we've added _readonly bool field
to the table class, it's initialized to true in table's
constructor. In addition, we changed the table constructor
to always assign nullptr to commitlog, and we trigger
an internal error if table.commitlog() property is accessed
while the table is in readonly mode. Then, after
triggering on_system_tables_loaded notifications on
feature_service and sstable_format_selector, we call
system_keyspace::mark_writable and eventually
table::mark_ready_for_writes which selects the
proper commitlog and marks the table as writable.
In sstable_compaction_test we drop several
mark_ready_for_writes calls since they are redundant,
the table has already been made writable in
env.make_table_for_tests call.
The table::commitlog function either returns the current
commitlog or causes an error if the table is readonly. This
didn't work for virtual tables, since they never called
mark_ready_for_writes. In this commit we add this
call to initialize_virtual_tables.
schema::get_sharder() does not use the correct sharder for
tablet-based tables. Code which is supposed to work with all kinds of
tables should obtain the sharder from erm::get_sharder().
In that level no io_priority_class-es exist. Instead, all the IO happens
in the context of current sched-group. File API no longer accepts prio
class argument (and makes io_intent arg mandatory to impls).
So the change consists of
- removing all usage of io_priority_class
- patching file_impl's inheritants to updated API
- priority manager goes away altogether
- IO bandwidth update is performed on respective sched group
- tune-up scylla-gdb.py io_queues command
The first change is huge and was made semi-autimatically by:
- grep io_priority_class | default_priority_class
- remove all calls, found methods' args and class' fields
Patching file_impl-s is smaller, but also mechanical:
- replace io_priority_class& argument with io_intent* one
- pass intent to lower file (if applicatble)
Dropping the priority manager is:
- git-rm .cc and .hh
- sed out all the #include-s
- fix configure.py and cmakefile
The scylla-gdb.py update is a bit hairry -- it needs to use task queues
list for IO classes names and shares, but to detect it should it checks
for the "commitlog" group is present.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13963
Will be used by tablet-based replication strategies, for which
effective replication map is different per table.
Also, this patch adapts existing users of effective replication map to
use the per-table effective replication map.
For simplicity, every table has an effective replication map, even if
the erm is per keyspace. This way the client code can be uniform and
doesn't have to check whether replication strategy is per table.
Not all users of per-keyspace get_effective_replication_map() are
adapted yet to work per-table. Those algorithms will throw an
exception when invoked on a keyspace which uses per-table replication
strategy.
Use generation_type rather than generation_type::int_t
where possible and removed the deprecated
functions accepting the int_t.i
Ref #10459
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Convert all users to use sstables::generation_type::int_t.
Further patches will continue to convert most to
using sstables::generation_type instead so we can
abstract the value type.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
This series cleans up unit test in preparation for PR #12994.
Helpers are added (or reused) to not rely on specific sstable generation numbers where possible (other than loading reference sstables that are committed to the repo with given generation numbers), and to generate the sstables for tests easily, taking advantage of generation management in `sstable_test_env`, `table_for_tests`, or `replica::table` itself.
Closes#13242
* github.com:scylladb/scylladb:
test: add verify_mutation helpers.
test: add make_sstable_containing memtable
test: table_for_tests: add make_sstable function
test: sstable_test_env: add make_sst_factory methods
test: sstable_compaction_test: do not rely on specific generations
tests: use make_sstable defaults as much as possible
test: sstable_test_env: add make_table_for_tests
test: sstable_datafile_test: do not rely on sepecific sstable generations
test: sstable_test_env: add reusable_sst(shared_sstable)
sstable: expose get_storage function
test: mutation_reader_test: create_sstable: do not rely on specific generations
test: mutation_reader_test: do_test_clustering_order_merger_sstable_set: rely on test_envsstable generation
test: mutation_reader_test: combined_mutation_reader_test: define a local sst_factory function
test: mutation_reader_test: do not use tmpdir
test: use big format by default
test: sstable_compaction_test: use highest sstable version by default
test: test_env: make_db_config: set cfg host_id
test: sstable_datafile_test: fixup indentation
test: sstable_datafile_test: various tests: do_with_async
test: sstable_3_x_test: validate_read, sstable_assertions: get shared_sstable
test: sstable_3_x_test: compare_sstables: get shared_sstable
test: sstable_3_x_test: write_sstables: return shared_sstable
test: sstable_3_x_test: write, compare, validate_sstables: use env.tempdir
test: sstable_3_x_test: compacted_sstable_reader: do not reopen compacted_sst
test: lib: test_services: delete now unused stop_and_keep_alive
test: sstable_compaction_test: use deferred_stop to stop table_for_tests
test: sstable_compaction_test: compound_sstable_set_incremental_selector_test: do_with_async
test: sstable_compaction_test: sstable_needs_cleanup_test: do_with_async
test: sstable_compaction_test: leveled_05: fixup indentation
test: sstable_compaction_test: leveled_05: do_with_async
test: sstable_compaction_test: compact_02: do_with_async
test: sstable_compaction_test: compact_sstables: simplify variable allocation
test: sstable_compaction_test: compact_sstables: reindent
test: sstable_compaction_test: compact_sstables: use thread
test: sstable_compaction_test: sstable_rewrite: simplify variable allocation
test: sstable_compaction_test: sstable_rewrite: fixup indentation
test: sstable_compaction_test: sstable_rewrite: do_with_async
test: sstable_compaction_test: compact: fixup indentation
test: sstable_compaction_test: compact: complete conversion to async thread
test: sstable_compaction_test: compaction_manager_basic_test: rename generations to idx
Add a few goodies to sstable_test_env to extend
entry points with default params for make_sstable
and reusable_sst.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Tables need to know which storage their sstables need to be located at,
so class table needs to have itw reference of the storage options. The
thing can be inherited from the keyspace metadata.
Tests sometimes create table without keyspace at hand. For those use
default-initialized storage options (which is local storage).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The sstable perf test uses test_setup ability to create temporary
directory and clean it and that's the only place that uses it. Move the
remainders of test_setup into perf/ so that no unit tests attempt to
re-use it (there's test_env for that).
Remove unused _walker and _create_directory while at it.
Mark protected stuff private while at it as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
We currently have two method families to generate partition keys:
* make_keys() in test/lib/simple_schema.hh
* token_generation_for_shard() in test/lib/sstable_utils.hh
Both work only for schemas with a single partition key column of `text` type and both generate keys of fixed size.
This is very restrictive and simplistic. Tests, which wanted anything more complicated than that had to rely on open-coded key generation.
Also, many tests started to rely on the simplistic nature of these keys, in particular two tests started failing because the new key generation method generated keys of varying size:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same size. This makes some sense in the case of the key count estimation test, but makes no sense at all to me in the case of the sstable run test.
Closes#12657
* github.com:scylladb/scylladb:
test/lib/sstable_utils: remove now unused token_generation_for_shard() and friends
test/lib/simple_schema: remove now unused make_keys() and friends
test: migrate to tests::generate_partition_key[s]()
test/lib/test_services: add table_for_tests::make_default_schema()
test/lib: add key_utils.hh
test/lib/random_schema.hh: value_generator: add min_size_in_bytes
Each instance of compaction manager should have compaction module pointer
initialized. All contructors get task_manager reference with which
the module is created.
Use the newly introduced key generation facilities, instead of the the
old inflexible alternatives and hand-rolled code.
Most of the migrations are mechanic, but there are two tests that
were tricky to migrate:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same
size. This makes some sense in the case of the key count estimation
test, but makes no sense at all to me in the case of the sstable run
test.
The latter is pretty popular test/lib header that disseminates the
former one over whole lot of unit tests. The former, in turn, naturally
includes sstables.hh thus making tons of unrelated tests depend on
sstables class unused by them.
However, simple removal doesn't work, becase of local_shard_only bool
class definition in sstable_utils.hh used in simple_schema.hh. This
thing, in turn, is used in keys making helpers that don't belong to
sstable utils, so these are moved into simple_schema as well.
When done, this affects the mutation_source_test.hh, which needs the
local_shard_only bool class (and helps spreading the sstables.hh
throughout more unrelated tests) and a bunch of .cc test sources that
used sstable_utils.hh to indirectly include various headers of their
demand.
After patching, sstables.hh touches 2x times less tests. As a side
effect the sstables_manager.hh also becomes 2x times less dependent
on by tests.
Continuation of 9bdea110a6
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#12240
All users of `column_family_test_config()`, get the semaphore parameter
for it from `sstable_test_env`. It is clear that the latter serves as
the storage space for stable objects required by the table config. This
patch just enshrines this fact by moving the config factory method to
`sstable_test_env`, so it can just get what it needs from members.
In core code there's only one place that constructs table -- in
database.cc -- and this place currently has the sstables_manager pointer
sitting on table config (despite it's a pointer, it's always non-null).
All the tests always use the manager from one of _env's out there.
For now the new contructor arg is unused.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The compaction manager's empty constructor is supposed to be invoked
only in testing environment, however, it is easy to invoke it by mistake
from production code.
Here we add a more verbose constructor and making the default compaction
private, the verbose compiler need to be invoked with a tag
for_testing_tag, this will ensure that this constructor will be invoked
only when intended.
The unit tests were changed according to this new paradigm.
Tests: unit (dev)
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
In most files it was unused. We should move these to the patch which
moved out the last interesting reader from mutation_reader.hh (and added
the corresponding new header include) but its probably not worth the
effort.
Some other files still relied on mutation_reader.hh to provide reader
concurrency semaphore and some other misc reader related definitions.
For compaction to be able to purge expired data, like tombstones, a
sstable set snapshot is set in the compaction descriptor.
That's a decision that belongs to task type. For example, all regular
compaction enable GC, whereas scrub for example doesn't for safety
reasons.
The problem is that the decision is being made by every instantiation
of compaction_descriptor in the strategies, which is both unnecessary
and also adds lots of boilerplate to the code, making it hard to
understand and work with.
As sstable set snapshot is an implementation detail, a new method
is being added to compaction_descriptor to make the intention
clearer, making the interface easier to understand.
can_purge_tombstones, used previously by rewrite task only, is being
reused for communicating GC intention into task::compact_sstables().
The boilerplate was a pain when adding a new strategy method for
the ongoing work on cleanup, described by issue #10097.
Another benefit is that we'll now only create a set snapshot when
compaction will really run. Before, it could happen that the snapshot
would be discarded if the compaction attempt had to be postponed,
which is a waste of cpu cycles.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Memtables are a replica-side entity, and so are moved to the
replica module and namespace.
Memtables are also used outside the replica, in two places:
- in some virtual tables; this is also in some way inside the replica,
(virtual readers are installed at the replica level, not the
cooordinator), so I don't consider it a layering violation
- in many sstable unit tests, as a convenient way to create sstables
with known input. This is a layering violation.
We could make memtables their own module, but I think this is wrong.
Memtables are deeply tied into replica memory management, and trying
to make them a low-level primitive (at a lower level than sstables) will
be difficult. Not least because memtables use sstables. Instead, we
should have a memtable-like thing that doesn't support merging and
doesn't have all other funky memtable stuff, and instead replace
the uses of memtables in sstable tests with some kind of
make_flat_mutation_reader_from_unsorted_mutations() that does
the sorting that is the reason for the use of memtables in tests (and
live with the layering violation meanwhile).
Test: unit (dev)
Closes#10120
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Move replica-oriented classes to the replica namespace. The main
classes moved are ::database, ::keyspace, and ::table, but a few
ancillary classes are also moved. There are certainly classes that
should be moved but aren't (like distributed_loader) but we have
to start somewhere.
References are adjusted treewide. In many cases, it is obvious that
a call site should not access the replica (but the data_dictionary
instead), but that is left for separate work.
scylla-gdb.py is adjusted to look for both the new and old names.
Make compaction procedure switch to table_state. Only function in
compaction.cc still directly using table is
get_fully_expired_sstables(T,...), but subsequently we'll make it
switch to table_state and then we can finally stop including database.hh
in the compaction code.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
there's no need for wrapping compaction_data in shared_ptr, also
let's kill unused params in create_compaction_data to simplify
its creation.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
So the compaction perf of different compaction strategies can be
compared. Data timestamps are diversified such that they fall into four
different bucket if TWCS is used, in order to be able to stress the
timestamp based splitting code path.
Closes#9488
compaction_info must only contain info data to be exported to the
outside world, whereas compaction_data will contain data for
controlling compaction behavior and stats which change as
compaction progresses.
This separation makes the interface clearer, also allowing for
future improvements like removing direct references to table
in compaction.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Today, compaction is calling compaction manager to register / deregister
the compaction_info created by it.
This is a layer violation because manager sits one layer above
compaction, so manager should be responsible for managing compaction
info.
From now on, compaction_info will be created and managed by
compaction_manager. compaction will only have a reference to info,
which it can use to update the world about compaction progress.
This will allow compaction_manager to be simplified as info can be
coupled with its respective task, allowing duplication to be removed
and layer violation to be fixed.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
