This commit removes the now redundant driver pages from
the Scylla DB documentation. Instead, the link to the pages
where we moved the diver information is added.
Also, the links are updated across the ScyllaDB manual.
Redirections are added for all the removed pages.
Fixes https://github.com/scylladb/scylladb/issues/26871Closesscylladb/scylladb#27277
Fixes#27077
Multiple points can be clarified relating to:
* Names of each sub-procedure could be clearer
* Requirements of each sub-procedure could be clearer
* Clarify which keyspaces are relevant and how to check them
* Fix typos in keyspace name
Closesscylladb/scylladb#26855
In 2025.2, we don't force enabling the Raft-based topology in the code,
but we stated in the upgrade guides that it's a mandatory step of the
upgrade to 2025.1. We also remind users to enable the Raft-based
topology in the upgrade guides to 2025.2. Hence, we can rely in the
the documentation on the Raft-based topology being enabled. If it is
still disabled, we can just send the user to the upgrade guides. Hence:
- we remove all documentation related to enabling the Raft-based
topology, enabling the Raft-based schema (enabled Raft-based topology
implies enabled Raft-based schema), and the gossip-based topology,
- we can replace the documentation of the old manual recovery procedure
with the documentation of the new manual recovery procedure (done in
the previous commit).
Changing DC or rack on a node which was already bootstrapped is, in
case of vnodes, very unsafe (almost guaranteed to cause data loss or
unavailability), and is outright not supported if the cluster has
a tablet-backed keyspaces. Moreover, the possibility of doing that
makes it impossible to uphold some of the invariants promised by
the RF-rack-valid flag, which is eventually going to become
unconditionally enabled.
Get rid of the above problems by removing the possibility of changing
the DC / rack of a node. A node will now fail to start if its snitch
reports a different DC or rack than the one that was reported during the
first boot.
Fixes: scylladb/scylladb#23278Fixes: scylladb/scylladb#22869
Marking for backport to 2025.1, as this is a necessary part of the RF-rack-valid saga
Closesscylladb/scylladb#23800
* github.com:scylladb/scylladb:
doc: changing topology when changing snitches is no longer supported
test: cluster: introduce test_no_dc_rack_change
storage_service: don't update DC/rack in update_topology_with_local_metadata
main: make dc and rack immutable after bootstrap
test: cluster: remove test_snitch_change
Update the "How to Switch Snitches" document to indicate that changing
topology (i.e. changing node's DC or rack) while changing the snitch is
no longer supported.
Remove a note which said that switching snitches is not supported with
tablets. It was introduced because of the concern that switching a
snitch might change DC or rack of the node, for which our current tablet
load balancer is completely unprepated. Now that changing DC/rack is
forbidden, there doesn't seem to be anything related to snitches which
could cause trouble for tablets.
This commit removes the outdated information about seed nodes.
We no longer need it in the docs, as a) the documentation is versioned,
and b) the ScyllaDB Open Source 4.3 and ScyllaDB Enterprise 2021.1 versions
mentioned in the docs are no longer supported.
In addition, some clarification has been added to the existing sections.
Fixes https://github.com/scylladb/scylladb/issues/22400Closesscylladb/scylladb#23282
This commit adds documentation for zero-token nodes and an explanation
of how to use them to set up an arbiter DC to prevent a quorum loss
in multi-DC deployments.
The commit adds two documents:
- The one in Architecture describes zero-token nodes.
- The other in Cluster Management explains how to use them.
We need separate documents because zero-token nodes may be used
for other purposes in the future.
In addition, the documents are cross-linked, and the link is added
to the Create a ScyllaDB Cluster - Multi Data Centers (DC) document.
Refs https://github.com/scylladb/scylladb/pull/19684
Fixes https://github.com/scylladb/scylladb/issues/20294Closesscylladb/scylladb#21348
Fixes#22688
If we set a dc rf to zero, the options map will still retain a dc=0 entry.
If this dc is decommissioned, any further alters of keyspace will fail,
because the union of new/old options will now contained an unknown keyword.
Change alter ks options processing to simply remove any dc with rf=0 on
alter, and treat this as an implicit dc=0 in nw-topo strategy.
This means we change the reallocate_tablets routine to not rely on
the strategy objects dc mapping, but the full replica topology info
for dc:s to consider for reallocation. Since we verify the input
on attribute processing, the amount of rf/tablets moved should still
be legal.
v2:
* Update docs as well.
v3:
* Simplify dc processing
* Reintroduce options empty check, but do early in ks_prop_defs
* Clean up unit test some
Closesscylladb/scylladb#22693
Adds detailed documentation covering the new audit subsystem:
- Add new audit.md design document explaining:
- Core concepts and design decisions
- CQL extensions for audit management
- Implementation details and trigger evaluation
- Prior art references from other databases
- Add user-facing documentation:
- New auditing.rst guide with configuration and usage details
- Integration with security documentation index
- Updates to cluster management procedures
- Updates to security checklist
The documentation covers all aspects of the audit system including:
- Configuration options and storage backends (syslog/table)
- Audit categories (DCL/DDL/AUTH/DML/QUERY/ADMIN)
- Permission model and security considerations
- Failure handling and logging
- Example configurations and output formats
This ensures users have complete guidance for setting up and using
the new audit capabilities.
The "--experimental" option was removed in commit f6cca741ea. Using this
deprecated option now causes Scylla to fail with the error:
```
error: the argument ('on') for option '--experimental-features' is invalid
```
So, in this change, let's update the docker entry point script to use
`--experimental-features` command line option instead. The related
document is updated accordingly.
Fixesscylladb/scylladb#22207
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22283
Fixes https://github.com/scylladb/scylla-enterprise/issues/5016#issuecomment-2558464631
EAR - encryption at rest. Allows on-disk file encryption of sstables and commitlog data.
Introduces OpenSSL based file level encrypted storage, managed via a set of providers
ranging from local files to cloud KMS providers.
For a more comprehensive explanation, see the included docs (or if possible, original
source tree).
Manual bulk merge of EAR feature from enterprise repo to main scylla repo.
Breaks some features apart, but main EAR is still a humongous commit, because to separate this
I would have to mess with code incrementally, adding time and risk.
This PR includes the local file gen tool, tests and also p11 validation.
Note: CI will not execute the full tests unless master CI is set to provide the same environment
as the enterprise one. Not sure about the status of this ATM.
Note: Includes code to compile against cryptsoft kmipc SDK, but not the SDK. If you happen to
check out this tree in the scylla folder and configure, it will be linked against and KMIP functionality
will be enabled, otherwise not.
Closesscylladb/scylladb#22233
* github.com:scylladb/scylladb:
docs: Add EAR docs
main/build: Add p11-kit and initialize
tools: Add local-file-key-generator tool
tests: Add EAR tests
tmpdir: shorten test tempdir path
EAR: port the ear feature from enterprise
cql_test_env: Add optional query timeout
schema/migration_manager: Add schema validate
sstables: add get_shared_components accessor
config/config_file: Add exports and definitions of config_type_for<>
remove the "ScyllaDB Enterprise" labels in document. because
there is no need to differentiate ScyllaDB Enterprise from its OSS
variant, let's stop adding the "ScyllaDB Enterprise" labels to
enterprise-only features. this helps to reduce the confusion.
as we are still in the process of porting the enterprise features
to this repo, this change does not fixscylladb/scylladb#22175.
we will review the document again when completing the migration.
we also take this opportunity to stop referencing "Enterprise" in
the changed paragraph.
Refs scylladb/scylladb#22175
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22177
ICS is a compaction strategy that inherits size tiered properties --
therefore it's write optimized too -- but fixes its space overhead of
100% due to input files being only released on completion. That's
achieved with the concept of sstable run (similar in concept to LCS
levels) which breaks a large sstable into fixed-size chunks (1G by
default), known as run fragments. ICS picks similar-sized runs
for compaction, and fragments of those runs can be released
incrementally as they're compacted, reducing the space overhead
to about (number_of_input_runs * 1G). This allows user to increase
storage density of nodes (from 50% to ~80%), reducing the cost of
ownership.
NOTE: test_system_schema_version_is_stable adjusted to account for batchlog
using IncrementalCompactionStrategy
contains:
compaction/: added incremental_compaction_strategy.cc (.hh), incremental_backlog_tracker.cc (.hh)
compaction/CMakeLists.txt: include ICS cc files
configure.py: changes for ICS files, includes test
db/legacy_schema_migrator.cc / db/schema_tables.cc: fallback to ICS when strategy is not supported
db/system_keyspace: pick ICS for some system tables
schema/schema.hh: ICS becomes default
test/boost: Add incremental_compaction_test.cc
test/boost/sstable_compaction_test.cc: ICS related changes
test/cqlpy/test_compaction_strategy_validation.py: ICS related changes
docs/architecture/compaction/compaction-strategies.rst: changes to ICS section
docs/cql/compaction.rst: changes to ICS section
docs/cql/ddl.rst: adds reference to ICS options
docs/getting-started/system-requirements.rst: updates sentence mentioning ICS
docs/kb/compaction.rst: changes to ICS section
docs/kb/garbage-collection-ics.rst: add file
docs/kb/index.rst: add reference to <garbage-collection-ics>
docs/operating-scylla/procedures/tips/production-readiness.rst: add ICS section
some relevant commits throughout the ICS history:
commit 434b97699b39c570d0d849d372bf64f418e5c692
Merge: 105586f747 30250749b8
Author: Paweł Dziepak <pdziepak@scylladb.com>
Date: Tue Mar 12 12:14:23 2019 +0000
Merge "Introduce Incremental Compaction Strategy (ICS)" from Raphael
"
Introduce new compaction strategy which is essentially like size tiered
but will work with the existing incremental compaction. Thus incremental
compaction strategy.
It works like size tiered, but each element composing a tier is a sstable
run, meaning that the compaction strategy will look for N similar-sized
sstable runs to compact, not just individual sstables.
Parameters:
* "sstable_size_in_mb": defines the maximum sstable (fragment) size
composing
a sstable run, which impacts directly the disk space requirement which is
improved with incremental compaction.
The lower the value the lower the space requirement for compaction because
fragments involved will be released more frequently.
* all others available in size tiered compaction strategy
HOWTO
=====
To change an existing table to use it, do:
ALTER TABLE mykeyspace.mytable WITH compaction =
{'class' : 'IncrementalCompactionStrategy'};
Set fragment size:
ALTER TABLE mykeyspace.mytable WITH compaction =
{'class' : 'IncrementalCompactionStrategy', 'sstable_size_in_mb' : 1000 }
"
commit 94ef3cd29a196bedbbeb8707e20fe78a197f30a1
Merge: dca89ce7a5 e08ef3e1a3
Author: Avi Kivity <avi@scylladb.com>
Date: Tue Sep 8 11:31:52 2020 +0300
Merge "Add feature to limit space amplification in Incremental Compaction" from Raphael
"
A new option, space_amplification_goal (SAG), is being added to ICS. This option
will allow ICS user to set a goal on the space amplification (SA). It's not
supposed to be an upper bound on the space amplification, but rather, a goal.
This new option will be disabled by default as it doesn't benefit write-only
(no overwrites) workloads and could hurt severely the write performance.
The strategy is free to delay triggering this new behavior, in order to
increase overall compaction efficiency.
The graph below shows how this feature works in practice for different values
of space_amplification_goal:
https://user-images.githubusercontent.com/1409139/89347544-60b7b980-d681-11ea-87ab-e2fdc3ecb9f0.png
When strategy finds space amplification crossed space_amplification_goal, it
will work on reducing the SA by doing a cross-tier compaction on the two
largest tiers. This feature works only on the two largest tiers, because taking
into account others, could hurt the compaction efficiency which is based on
the fact that the more similar-sized sstables are compacted together the higher
the compaction efficiency will be.
With SAG enabled, min_threshold only plays an important role on the smallest
tiers, given that the second-largest tier could be compacted into the largest
tier for a space_amplification_goal value < 2.
By making the options space_amplification_goal and min_threshold independent,
user will be able to tune write amplification and space amplification, based on
the needs. The lower the space_amplification_goal the higher the write
amplification, but by increasing the min threshold, the write amplification
can be decreased to a desired amount.
"
commit 7d90911c5fb3fa891ad64a62147c3a6ca26d61b1
Author: Raphael S. Carvalho <raphaelsc@scylladb.com>
Date: Sat Oct 16 13:41:46 2021 -0300
compaction: ICS: Add garbage collection
Today, ICS lacks an approach to persist expired tombstones in a timely manner,
which is a problem because accumulation of tombstones are known to affecting
latency considerably.
For an expired tombstone to be purged, it has to reach the top of the LSM tree
and hope that older overlapping data wasn't introduced at the bottom.
The condition are there and must be satisfied to avoid data resurrection.
STCS, today, has an inefficient garbage collection approach because it only
picks a single sstable, which satisfies the tombstone density threshold and
file staleness. That's a problem because overlapping data either on same tier
or smaller tiers will prevent tombstones from being purged. Also, nothing is
done to push the tombstones to the top of the tree, for the conditions to be
eventually satisfied.
Due to incremental compaction, ICS can more easily have an effecient GC by
doing cross-tier compaction of relevant tiers.
The trigger will be file staleness and tombstone density, which threshold
values can be configured by tombstone_compaction_interval and
tombstone_threshold, respectively.
If ICS finds a tier which meets both conditions, then that tier and the
larger[1] *and* closest-in-size[2] tier will be compacted together.
[1]: A larger tier is picked because we want tombstones to eventually reach the
top of the tree.
[2]: It also has to be the closest-in-size tier as the smaller the size
difference the higher the efficiency of the compaction. We want to minimize
write amplification as much as possible.
The staleness condition is there to prevent the same file from being picked
over and over again in a short interval.
With this approach, ICS will be continuously working to purge garbage while
not hurting overall efficiency on a steady state, as same-tier compactions are
prioritized.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20211016164146.38010-1-raphaelsc@scylladb.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#22063
This patch sets up an `alien_worker`, `advanced_rpc_compression::tracker`,
`dict_sampler` and `dictionary_service` in `main()`, and wires them to each other
and to `messaging_service`.
`messaging_service` compresses its network traffic with compressors managed by
the `advanced_rpc_compression::tracker`. All this traffic is passed as a single
merged "stream" through `dict_sampler`.
`dictionary_service` has access to `dict_sampler`.
On chosen nodes (by default: the Raft leader), it uses the sampler to maintain
a random multi-megabyte sample of the sampler's stream. Every several minutes,
it copies the sample, trains a compression dictionary on it (by calling zstd's
training library via the `alien_worker` thread) and publishes the new dictionary
to `system.dicts` via Raft.
This update triggers a callback into `advanced_rpc_compression::tracker` on all nodes,
which updates the dictionary used by the compressors it manages.
This commit removes the raw:: html directive (with the exception of an embedded animation) because:
- It is not supported by the dark theme and looks bad.
- It's a legacy directive, and we no longer need it on index pages.
Fixes https://github.com/scylladb/scylladb/issues/20881Closesscylladb/scylladb#21062
We update the relevant articles addressing backing-up
and restoring the schema by specifying that the user
performing it must be a superuser. We also update
the required version of cqlsh.
Additionally, we add an article covering the fundamental
information on `DESCRIBE SCHEMA`.
This commit moves the Features page from the section for developers
to the top level in the page tree. This involves:
- Moving the source files to the *features* folder from the *using-scylla* folder.
- Moving images into *features/images* folder.
- Updating references to the moved resources.
- Adding redirections to the moved pages.
Closesscylladb/scylladb#20401
This commit removes the 5.4-to-6.0 upgrade guide and all references to it.
It mainly removes references to the Enable Consistent Topology Updates page,
which was added as enabling the feature was optional.
In rare cases, when a reference to that page is necessary,
the internal link is replaced with an external link to version 6.0.
Especially the Handling Cluster Membership Change Failures page was modified
for troubleshooting purposes rather than removed.
thrift support was deprecated since ScyllaDB 5.2
> Thrift API - legacy ScyllaDB (and Apache Cassandra) API is
> deprecated and will be removed in followup release. Thrift has
> been disabled by default.
so let's drop it. in this change,
* thrift protocol support is dropped
* all references to thrift support in document are dropped
* the "thrift_version" column in system.local table is
preserved for backward compatibility, as we could load
from an existing system.local table which still contains
this clolumn, so we need to write this column as well.
* "/storage_service/rpc_server" is only preserved for
backward compatibility with java-based nodetool.
* `rpc_port` and `start_rpc` options are preserved, but
they are marked as "Unused". so that the new release
of scylladb can consume existing scylla.yaml configurations
which might contain these settings. by making them
deprecated, user will be able get warned, and update
their configurations before we actually remove them
in the next major release.
Fixes#3811Fixes#18416
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Update docs for backup procedure to use `DESC SCHEMA WITH INTERNALS`
instead of plain `DESC SCHEMA`.
Add a note to use cqlsh in a proper version (at least 6.0.19).
Closesscylladb/scylladb#18953
Separate keyspace which also behaves as system brings
little benefit while creating some compatibility problems
like schema digest mismatch during rollback. So we decided
to move auth tables into system keyspace.
Fixes https://github.com/scylladb/scylladb/issues/18098Closesscylladb/scylladb#18769
This commit fixes the incorrect Raft-related information on the Handling Cluster Membership Change Failures page
introduced with https://github.com/scylladb/scylladb/pull/17500.
The page describes the procedure for when Raft is disabled. Since 6.0, Raft for consistent schema management
is enabled and mandatory (cannot be disabled), this commit adds the procedure for Raft-enabled setups.
Closesscylladb/scylladb#18803
This commit includes updates related to replacing system_auth with system_auth_v2.
- The keyspace name system_auth is renamed to system_auth_v2.
- The procedures are updated to account for system_auth_v2.
- No longer required system_auth RF changes are removed from procedures.
- The information is added that if the consistent topology updates feature
was not enabled upon upgrade from 5.4, there are limitations or additional
steps to do (depending on the procedure).
The files with that kind of information are to be found in _common folders
and included as needed.
- The upgrade guide has been updated to reflect system_auth_v2 and related impacts.
Closesscylladb/scylladb#18077
To change snitch with raft all nodes need to be started simultaneously
since each node will try to update its state in the raft and for that
quorum is required.
This commit removes the redundant
"Cluster membership changes and LWT consistency" page.
The page is no longer useful because the Raft algorithm
serializes topology operations, which results in
consistent topology updates.
Closesscylladb/scylladb#17523
This commit updates the Handling Cluster Membership Change Failures page
with reference to the Raft-related topology.
Specifically, it adds a note that the page only applies when
Raft-based topology is not enabled.
In addition, it removes the Raft-enabled option.
This commit updates the Replace a Dead Node page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to replace the nodes one by one and the requirement to ensure
that the the replaced node will never come back to the cluster
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Remove a Node page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to remove the nodes one by one and the requirement to ensure
that the the removed node will never come back to the cluster
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Add a New DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Add a New Node (Out Scale) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Create Cluster (EC2) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
This commit updates the Create Cluster (Multi DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
This commit updates the Create Cluster (Single DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
