With python 3.14, the Process fails due to pickling issue with nodes objects.
This will eliminate this issue, so we can bump up the python version.
Closesscylladb/scylladb#27456
Range tombstones are represented as entry attributes, which applies to
the interval between entries. So if a range tombstone covers many
rows, to apply it we have to update all covered entries. In some
workloads that could be many entries, even the whole cache. Before
the patch, we did this update without preemption, which can cause
reactor stalls in such workloads.
This scenario is already covered by mvcc_tests,
e.g. test_apply_to_incomplete_respects_continuity. And I verified that
the new preemption point is hit in the test.
perf-row-cache-update results show no significant stalls anymore (max
2ms scheduling delay, instead of previous 1.5 s):
Generated 1124195 rows
Memtable fill took 4179.457520 [ms], {count: 8295, 99%: 0.654949 [ms], max: 32.817176 [ms]}
Draining...
took 0.000616 [ms]
cache: 2506/2948 [MB], memtable: 781/1024 [MB], alloc/comp: 1051/662 [MB] (amp: 0.630)
update: 2874.157471 [ms], preemption: {count: 26650, 99%: 1.131752 [ms], max: 2.068762 [ms]}, cache: 3027/3973 [MB], alloc/comp: 3951/2424 [MB] (amp: 0.614), pr/me/dr 1124195/0/0
Fixes#23479Fixes#2578Closesscylladb/scylladb#27469
* github.com:scylladb/scylladb:
cache, mvcc: Preempt cache update when applying range tombstone from memtable
partition_snapshot_row_cursor: Clarify non-obvious semantic difference of range_tombstone()
perf-row-cache-update: Add scenario with large tombstone covering many rows
We saw that in large clusters direct failure detector may cause large task queues to be accumulated. The series address this issue and also moves the code into the correct scheduling group.
Fixes https://github.com/scylladb/scylladb/issues/27142
Backport to all version where 60f1053087 was backported to since it should improve performance in large clusters.
Closesscylladb/scylladb#27387
* github.com:scylladb/scylladb:
direct_failure_detector: run direct failure detector in the gossiper scheduling group
raft: drop invoke_on from the pinger verb handler
direct_failure_detector: pass timeout to direct_fd_ping verb
Fills memtable with rows and a tombstone which deletes all rows which
are already in cache.
Similar to raft log workload, but more extreme.
With -c1 -m4G, observed really bad performance:
update: 1711.976196 [ms], preemption: {count: 22603, 99%: 0.943127 [ms], max: 1494.571776 [ms]}, cache: 2148/2906 [MB], alloc/comp: 1334/869 [MB] (amp: 0.651), pr/me/dr 1062186/0/1062187
cache: 2148/2906 [MB], memtable: 738/1024 [MB], alloc/comp: 993/0 [MB] (amp: 0.000)
Which means that max reactor stall during cache update was 1.5 [s]
0.7 GB memtables. 2.1 GB in cache.
The DynamoDB API's "BatchWriteItem" operation is spelled like this, in
singular. Some comments incorrectly referred to as BatchWriteItems - in
plural. This patch fixes those mistakes.
There are no functional changes here or changes to user-facing documents -
these mistakes were only in code comments.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#27446
This pull request adds support for calculation and storing CRC32 digests for all SSTable components.
This change replaces plain file_writer with crc32_digest_file_writer for all SSTable components that should be checksummed. The resulting component digests are stored in the sstable structure
and later persisted to disk as part of the Scylla metadata component during writer::consume_end_of_stream.
All important SSTable components (Index, Partitions, Rows, Summary, Filter, CompressionInfo, and TOC) are covered.
Several test cases where introduced to verify expected behaviour.
Backport is not required, it is a new feature
Fixes#20100Closesscylladb/scylladb#27287
* github.com:scylladb/scylladb:
sstable_test: add verification testcases of SSTable components digests persistance
sstables: store digest of all sstable components in scylla metadata
sstables: Add TemporaryScylla metadata component type
sstables: Extract file writer closing logic into separate methods
sstables: Add components_digests to scylla metadata components
sstables: Implement CRC32 digest-only writer
Fixes#27367Fixes#27362Fixes#27366
Makes http URL parser handle IPv6.
Makes KMIP host setup handle IPv6 hosts + use system trust if no truststore set
Moves Azure/KMS code to use shared http URL parser to avoid same regex everywhere.
Closesscylladb/scylladb#27368
* github.com:scylladb/scylladb:
ear::kms/ear::azure: Use utils::http URL parsing
ear::kmip_host: Handle ipv6 hosts + use system trust when not specified
utils::http: Handle ipv6 numeric host part in URL:s
It is observed that:
repair - repair[667d4a59-63fb-4ca6-8feb-98da49946d8b]: Failed to update
system.repair_history table of node d27de212-6f32-4649ad76-a9ef1165fdcb:
seastar::rpc::remote_verb_error (repair[667d4a59-63fb-4ca6-8feb-98da49946d8b]: range (minimum
token,maximum token) is not in the format of (start, end])
This is because repair checks the end of the range to be repaired needs
to be inclusive. When small_table_optimization is enabled for regular
repair, a (minimum token,maximum token) will be used.
To fix, we can relax the check of (start, end] for the min max range.
Fixes#27220Closesscylladb/scylladb#27357
The rf_rack_valid_keyspaces option needs to be turned on in order to
allow creating materialized views in tablet keyspaces with numeric RF
per DC. This is also necessary for secondary indexes because they use
materialized views underneath. However, this option is _not_ necessary
for vector store indexes because those use the external vector store
service for querying the list of keys to fetch from the main table, they
do not create a materialized view. The rf_rack_valid_keyspaces was, by
accident, required for vector indexes, too.
Remove the restriction for vector store indexes as it is completely
unnecessary.
Fixes: SCYLLADB-81
Closesscylladb/scylladb#27447
Adds a generic test helper that writes a random SSTable, reloads it, and
verifies that the persisted CRC32 digest for each component matches the
digest computed from disk. Those covers all checksummed components test cases.
After 39cec4ae45 node join may fail with either "request canceled" notification or (very rarely) because it was banned. Depend on timing. The series fixes the test to check for both possibilities.
Fixes#27320
No need to backport since the flakiness is in the mater only.
Closesscylladb/scylladb#27408
* https://github.com/scylladb/scylladb:
test: fix test_coordinator_queue_management flakiness
test/pylib: allow expected_error in server_start to contain regular expression
The storage_service REST API uses `group0` internally. Before this
patch, it was possible to send an HTTP request before `group0` was
initialized, which resulted in a segmentation fault. Therefore,
this patch delays the setup of the storage_service REST API.
Additionally, `test_rest_api_on_startup` is added to reproduce the problem.
Fixes: https://github.com/scylladb/scylladb/issues/27130
No backport. It's a crash fix but possible only if a request is sent in a very specific phase of a node start.
Closesscylladb/scylladb#27410
* github.com:scylladb/scylladb:
test: add test_rest_api_on_startup
main: delay setup of storage_service REST API
Fixes#27366
A URL with numeric host part formats special in case of ipv6,
to avoid confusion with port part.
The parser should handle this.
I.e.
http://[2001:db8:4006:812::200e]:8080
v2:
* Include scheme agnostic parse + case insensitive scheme matching
The PRUNE MATERALIZED VIEW statement is performed as follows:
1. Perform a range scan of the view table from the view replicas based
on the ranges specified in the statement.
2. While reading the paged scan above, for each view row perform a read
from all base replicas at the corresponding primary key. If a discrepancy
is detected, delete the row in the view table.
When reading multiple rows, this is very slow because for each view row
we need to performe a single row query on multiple replicas.
In this patch we add an option to speed this up by performing many of the
single base row reads concurrently, at the concurrency specified in the
USING CONCURRENCY clause.
Aside from the unit test, I checked manually on a 3-node cluster with 10M rows, using vnodes. There were actually no ghost rows in the test, but we still had to iterate over all view rows and read the corresponding base rows. And actual ghost rows, if there are any, should be a tiny fraction of all rows. I compared concurrencies 1,2,10,100 and the results were:
* Pruning with concurrency 1 took total 1416 seconds
* Pruning with concurrency 2 took total 731 seconds
* Pruning with concurrency 10 took total 234 seconds
* Pruning with concurrency 100 took total 171 seconds
So after a concurrency of 10 or so we're hitting diminishing returns (at least in this setup). At that point we may be no longer bottlenecked by the reads, but by CPU on the shard that's handling the PRUNE
Fixes https://github.com/scylladb/scylladb/issues/27070Closesscylladb/scylladb#27097
* github.com:scylladb/scylladb:
mv: allow setting concurrency in PRUNE MATERIALIZED VIEW
cql: add CONCURRENCY to the USING clause
When direct failure detector was introduces the idea was that it will
run on the same connection raft group0 verbs are running, but in
60f1053087 raft verbs were moved to run on the gossiper connection
while DIRECT_FD_PING was left where it was. This patch move it to
gossiper connection as well and fix the pinger code to run in gossiper
scheduling group.
After 39cec4ae45 node join may fail with either "request canceled"
notification or (very rarely) because it was banned. Depend on timing.
The patch fixes the test to check for both possibilities.
Consider the following scenario:
1. A table has RF=3 and writes use CL=QUORUM
2. One node is down
3. There is a pending tablet migration from the unavailable node
that is reverted
During the revert, there can be a time window where the pending replica
being cleaned up still accepts writes. This leads to write failures,
as only two nodes (out of four) are able to acknowledge writes.
This patch fixes the issue by adding a barrier to the cleanup_target
tablet transition state, ensuring that the coordinator switches back to
the previous replica set before cleanup is triggered.
Fixes https://github.com/scylladb/scylladb/issues/26512
It's a pre existing issue. Backport is required to all recent 2025.x versions.
Closesscylladb/scylladb#27413
* github.com:scylladb/scylladb:
topology_coordinator: Fix the indentation for the cleanup_target case
topology_coordinator: Add barrier to cleanup_target
test_node_failure_during_tablet_migration: Increase RF from 2 to 3
Consider the following scenario:
1. A table has RF=3 and writes use CL=QUORUM
2. One node is down
3. There is a pending tablet migration from the unavailable node
that is reverted
During the revert, there can be a time window where the pending replica
being cleaned up still accepts writes. This leads to write failures,
as only two nodes (out of four) are able to acknowledge writes.
This patch fixes the issue by adding a barrier to the cleanup_target
tablet transition state, ensuring that the coordinator switches back to
the previous replica set before cleanup is triggered.
Fixes https://github.com/scylladb/scylladb/issues/26512
The patch prepares the test for additional write workload to be
executed in parallel with node failures. With the original RF=2,
QUORUM is also 2, which causes writes to fail during node outage.
To address it, the third rack with a single node is added and the
replication factor is increased to 3.
This test verifies that REST API requests are handled properly
when a server is started or restarted. It is used to verify
the fix for scylladb/scylladb#27130, where a server failed with a
segmentation fault when `storage_service/raft_topology/reload` was
called too early.
Refs: scylladb/scylladb#27130
Creating endpoint conf can be made with the s3_server method
Getting boto3 resource from s3_server itself is also possible
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#27380
The test executes a LWT query in order to create a paxos state table and
verify the table properties. However, after executing the LWT query, the
table may not exist on all nodes but only on a quorum of nodes, thus
checking the properties of the table may fail if the table doesn't exist
on the queried node.
To fix that, execute a group0 read barrier to ensure the table is
created on all nodes.
Fixesscylladb/scylladb#27398Closesscylladb/scylladb#27401
Since Alternator is now using tablets by default, it's no longer possible
to create an Alternator table on a 3-node cluster with a single rack -
you need to have 3 racks to support RF=3.
Most of the multi-node Alternator tests in test/cluster/test_alternator.py
were already fixed to use a 3-rack cluster, but one test was missed
because it was marked "xfail" so its new failure to create the table was
missed. This patch adds the missing 3-rack setup, so the xfailing test
returns to failing on the real bug - not on the table creation.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#27382
Even though that `view_building_coordinator::work_on_view_building` has
an `if` at the very beginning which checks whether the currently
processed base table is set, it only prints a message and continues
executing the rest of the function regardless of the result of the
check. However, some of the logic in the function assumes that the
currently processed base table field is set and tries to access the
value of the field. This can lead to the view building coordinator
accessing a disengaged optional, which is undefined behavior.
Fix the function by adding the clearly missing `co_await` to the check.
A regression test is added which checks that the view building state
observer - a different fiber which used to print a weird message due to
erroneus view building coordinator behavior - does not print a warning.
Fixes: scylladb/scylladb#27363Closesscylladb/scylladb#27373
Currently direct_fd_ping runs without timeout, but the verb is not
waited forever, the wait is canceled after a timeout, this timeout
simply is not passed to the rpc. It may create a situation where the
rpc callback can runs on a destination but it is no longer waited on.
Change the code to pass timeout to rpc as well and return earlier from
the rpc handler if the timeout is reached by the time the callback is
called. This is backwards compatible since timeout is passed as
optional.
This reverts commit b0643f8959, reversing
changes made to e8b0f8faa9.
The change forgot to update
sstables_manager::get_highest_supported_format(), which results in
/system/highest_supported_sstable_version still returning me, confusing
and breaking tests.
Fixes: scylladb/scylla-dtest#6435Closesscylladb/scylladb#27379
The root cause for the hanging test is a concurrency deadlock.
`vector_store_client` runs dns refresh time and it is waiting for the condition
variable.After aborting dns request the test signals the condition variable.
Stopping the vector_store_client takes time enough to trigger the next dns
refresh - and this time the condition variable won't be signalled - so
vector_store_client will wait forever for finish dns refresh fiber.
The commit fixes the problem by waiting for the condition variable only once.
Fixes: #27237
Fixes: VECTOR-370
Closesscylladb/scylladb#27239
This PR introduces two key improvements to the robustness and resource management of vector search:
Proper Abort on CQL Timeout: Previously, when a CQL query involving a vector search timed out
, the underlying ANN query to the vector store was not aborted and would continue to run. This has been fixed by ensuring the abort source is correctly signaled, terminating the ANN request when its parent CQL query expires and preventing unnecessary resource consumption.
Faster Failure Detection: The connection and keep-alive timeouts for vector store nodes were excessively long (2 and 11 minutes, respectively), causing significant delays in detecting and recovering from unreachable nodes. These timeouts are now aligned with the request_timeout_in_ms setting, allowing for much faster failure detection and improving high availability by failing over from unresponsive nodes more quickly.
Fixes: SCYLLADB-76
This issue affects the 2025.4 branch, where similar HA recovery delays have been observed.
Closesscylladb/scylladb#27377
* github.com:scylladb/scylladb:
vector_search: Fix ANN query abort on CQL timeout
vector_search: Reduce connection and keep-alive timeouts
When a CQL vector search request timed out, the underlying ANN query was
not aborted and continued to run. This happened because the abort source
was not being signaled upon request expiration.
This commit ensures the ANN query is aborted when the CQL request times out
preventing unnecessary resource consumption.
The connection timeout was 2 minutes and the keep-alive
timeout was 11 minutes. If a vector store node became unreachable, these
long timeouts caused significant delays before the system could recover,
negatively impacting high availability.
This change aligns both timeouts with the `request_timeout`
configuration, which defaults to 10 seconds. This allows for much
faster failure detection and recovery, ensuring that unresponsive nodes
are failed over from more quickly.
In this series we implement Alternator's support for gzip-compressed
requests, i.e., requests with the "Content-Encoding: gzip" header,
other uncompressed header, and a gzip-compressed body.
The server needs to verify the signature of the *compressed* content,
and then uncompress the body before running the request.
We only support gzip compression because this is what DynamoDB supports.
But in the future we can easily add support for other compression
algorithms like lz4 or zstd.
This series Refs #5041 but doesn't "Fixes" it because it only implements
compressed requests (Content-Encoding), *not* compressed responses
(Accept-Encoding).
In addition to the code changes, the series also contains tests for this
feature that make sure it behaves like DynamoDB.
Note that while we will have now support in our server for compressed
requests, just like DynamoDB does, the clients (AWS SDKs) will probably
NOT make use of it because they do not enable request compression by
default. For example, see the tests for some hoops one needs to jump
through in boto3 (the Python SDK) to send compressed requests. However,
we are hoping that in the future Alternator's modified clients will
use compressed requests and enjoy this feature.
Closesscylladb/scylladb#27080
* github.com:scylladb/scylladb:
test/alternator: enable, and add, tests for gzip'ed requests
alternator: implement gzip-compressed requests
seastar::compat::source_location (which should not have been used
outside Seastar) is replaced with std::source_location to avoid
deprecation warnings. The relevant header, which was removed, is no
longer included.
* seastar 8c3fba7a...b5c76d6b (3):
> testing: There can be only one memory_data_sink
> util: Use std::source_location directly
> Merge 'net: support proxy protocol v2' from Avi Kivity
apps: httpd: add --load-balancing-algorithm
apps: httpd: add /shard endpoint
test: socket_test: add proxy protocol v2 test suite
test: socket_test: test load balancer with proxy protocol
net: posix_connected_socket: specialize for proxied connections
net: posix_server_socket_impl: implement proxy protocol in server sockets
net: posix_server_socket_impl: adjust indentation
net: posix_server_socket_impl: avoid immediately-invoked lambda
net: conntrack: complete handle nested class special member functions
net: posix_server_socket_impl: coroutinize accept()
Closesscylladb/scylladb#27316
This patch increases the compatibility with DynamoDB Streams by integrating the DynamoDB's event type rules (described in https://github.com/scylladb/scylladb/issues/6918) into Alternator. The main changes are:
- introduce a new flag `alternator_streams_strict_compatibility`, meant as a guard of performance-intensive operations that increase the compatibility with DynamoDB Streams. If enabled, Alternator always performs a RBW before a data-modifying operation, and propagates its result to CDC. Then, the old item is compared to the new one, to determine the mutation type (INSERT vs MODIFY). This option is a no-op for tables with disabled Alternator Streams,
- reduce splitting of simple Alternator mutations,
- correctly distinguish event types described in #6918, except for item deletes. Deleting a missing item with DeleteItem, BatchWriteItem, or a missing field with UpdateItem still emit REMOVEs.
To summarize, the emitted events of the data manipulation operations should be as follows:
- DeleteItem/BatchWriteItem.DeleteItem of existing item: REMOVE (OK)
- DeleteItem of nonexistent item: nothing (OK)
- BatchWriteItem.DeleteItem of nonexistent item: nothing (OK)
- PutItem/UpdateItem/BatchWriteItem.PutItem of existing and not equal item: MODIFY (OK)
- PutItem/UpdateItem/BatchWriteItem.PutItem of existing and equal item: nothing (OK)
- PutItem/UpdateItem/BatchWriteItem.PutItem of nonexistent item: INSERT (OK)
No backport is necessary.
Refs https://github.com/scylladb/scylladb/pull/26149
Refs https://github.com/scylladb/scylladb/pull/26396
Refs https://github.com/scylladb/scylladb/issues/26382
Fixes https://github.com/scylladb/scylladb/issues/6918
Closes scylladb/scylladb#26121
* github.com:scylladb/scylladb:
test/alternator: Enable the tests failing because of #6918
alternator, cdc: Don't emit events for no-op removes
alternator, cdc: Don't emit an event for equal items
alternator/streams, cdc: Differentiate item replace and item update in CDC
alternator: Change the return type of rmw_operation_return
config: Add alternator_streams_strict_compatibility flag
cdc: Don't split a row marker away from row cells
Consider this:
1) n1 is the topology coordinator
2) n1 schedules and executes a tablet repair with session id s1 for a
tablet on n3 an n4.
3) n3 and n4 take and store the in _rs._repair_compaction_locks[s1]
4) n1 steps down before it executes
locator::tablet_transition_stage::end_repair
5) n2 becomes the new topology coordinator
6) n2 runs locator::tablet_transition_stage::repair again
7) n3 and n4 try to take the lock again and hangs since the lock is
already taken.
To avoid the deadlock, we can throw in step 7 so that n2 will
proceed to end_repair stage and release the lock. After that, the
scheduler could schedule the tablet repair request again.
Fixes#26346Closesscylladb/scylladb#27163
Fix unlikely use-after-free in `encode_paging_state`. The function
incorrectly assumes that current position to encode will always have
data for all clustering columns the schema defines. It's possible to
encounter current position having less than all columns specified, for
eample in case of range tombstone. Those don't happen in Alternator
tables as DynamoDB doesn't allow range deletions and clustering key
might be of size at most 1. Alternator api can be used to read
scylla system tables and those do have range tombstones with more
than single clustering column.
The fix is to stop trying to encode columns, that don't have the value -
they are not needed anyway, as there's no possible position with those
values (range tombstone made sure of that).
Fixes#27001Fixes#27125Closesscylladb/scylladb#26960
Previously, `wait_until_driver_service_level_created` only waited for
the `driver` service level to appear in the output of
`LIST ALL SERVICE_LEVELS`. However, the fact that one node lists
`sl:driver` does not necessarily mean that all other nodes can see
it yet. This caused sporadic test failures, especially in DEBUG builds.
To prevent these failures, this change adds an extra wait for
a `raft/read_barrier` after the `driver` service level first appears.
This ensures the service level is globally visible across the cluster.
Fixes: https://github.com/scylladb/scylladb/issues/27019
Na backport - test fix for `sl:driver` tests, and this that is only available on `master`
Closesscylladb/scylladb#27076
* github.com:scylladb/scylladb:
test: wait for read_barrier in wait_until_driver_service_level_created
test: use ManagerClient in wait_until_driver_service_level_created
Before this commit, any attempt to create, alter, attach, or drop
the default service level would result in a syntax error whose
error message was unclear:
```
cqlsh> attach service level default to cassandra;
SyntaxException: line 1:21 no viable alternative at input 'default'
```
The error stems from the grammar not being able to parse `default`
as a correct service level name. To fix that, we cover it manually.
This way, the grammar accepts it and we can process it in Scylla.
The reason why we'd like to cover the default service level is that
it's an actual service level that the user should reference. Getting
a syntax error is not what should happen. Hence this fix.
We validate the input and if the given role is really the default
service level, we reject the query and provide an informative error
message.
Two validation tests are provided.
Fixesscylladb/scylladb#26699Closesscylladb/scylladb#27162
Fixes#24346
When reading, we check for each entry and each chunk, if advancing there
will hit EOF of the segment. However, IFF the last chunk being read has
the last entry _exactly_ matching the chunk size, and the chunk ending
at _exactly_ segment size (preset size, typically 32Mb), we did not check
the position, and instead complained about not being able to read.
This has literally _never_ happened in actual commitlog (that was replayed
at least), but has apparently happened more and more in hints replay.
Fix is simple, just check the file position against size when advancing
said position, i.e. when reading (skipping already does).
v2:
* Added unit test
Closesscylladb/scylladb#27236
The tablet scheduler should not emit conflicting migrations for the same
tablet. This was addressed initially in scylladb/scylladb#26038 but the
check is missing in the merge colocation plan, so add it there as well.
Without this check, the merge colocation plan could generate a
conflicting migration for a tablet that is already scheduled for
migration, as the test demonstrates.
This can cause correctness problems, because if the load balancer
generates two migrations for a single tablet, both will be written as
mutations, and the resulting mutation could contain mixed cells from
both migrations.
Fixesscylladb/scylladb#27304Closesscylladb/scylladb#27312
And switch to std::source_location.
Upcoming seastar update will deprecate its compatibility layer.
The patch is
for f in $(git grep -l 'seastar::compat::source_location'); do
sed -e 's/seastar::compat::source_location/std::source_location/g' -i $f;
done
and removal of few header includes.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#27309
The reason for this seastar update is to have the fixed handling
of the `integer` type in `seastar-json2code` because it's needed
for further development of ScyllaDB REST API.
The following changes were introduced to ScyllaDB code to ensure it
compiles with the updated seastar:
- Remove `seastar/util/modules.hh` includes as the file was removed
from seastar
- Modified `metrics::impl::labels_type` construction in
`test/boost/group0_test.cc` because now it requires `escaped_string`
* seastar 340e14a7...8c3fba7a (32):
> Merge 'Remove net::packet usage from dns.cc' from Pavel Emelyanov
dns: Optimize packet sending for newer c-ares versions
dns: Replace net::packet with vector<temporary_buffer>
dns: Remove unused local variable
dns: Remove pointless for () loop wrapping
dns: Introduce do_sendv_tcp() method
dns: Introduce do_send_udp() method
> test: Add http rules test of matching order
> Merge 'Generalize packet_data_source into memory_data_source' from Pavel Emelyanov
memcached: Patch test to use memory_data_source
memcached: Use memory_data_source in server
rpc: Use memory_data_sink without constructing net::packet
util: Generalize packet_data_source into memory_data_source
> tests: coroutines: restore "explicit this" tests
> reactor: remove blocking of SIGILL
> Merge 'Update compilers in GH actions scripts' from Pavel Emelyanov
github: Use gcc-14
github: Use clang-20
> Merge 'Reinforce DNS reverse resolution test ' from Pavel Emelyanov
test: Make test_resolve() try several addresses
test: Coroutinize test_resolve() helper
> modules: make module support standards-compliant
> Merge 'Fix incorrect union access in dns resolver' from Pavel Emelyanov
dns: Squash two if blocks together
dns: Do not check tcp entry for udp type
> coroutine: Fix compilation of execute_involving_handle_destruction_in_await_suspend
> promise: Document that promise is resolved at most once
> coroutine: exception: workaround broken destroy coroutine handle in await_suspend
> socket: Return unspecified socket_address for unconnected socket
> smp: Fix exception safety of invoke_on_... internal copying
> Merge 'Improve loads evaluation by reactor' from Pavel Emelyanov
reactor: Keep loads timer on reactor
reactor: Update loads evaluation loop
> Merge 'scripts: add 'integer' type to seastar-json2code' from Andrzej Jackowski
test: extend tests/unit/api.json to use 'integer' type
scripts: add 'integer' type to seastar-json2code
> Merge 'Sanitize tls::session::do_put(_one)? overloads' from Pavel Emelyanov
tls: Rename do_put_one(temporary_buffer) into do_put()
tls: Fix indentation after previous patch
tls: Move semaphore grab into iterating do_put()
> net: tcp: change unsent queue from packets to temporary_buffer:s
> timer: Enable highres timer based on next timeout value
> rpc: Add a new constructor in closed_error to accept string argument
> memcache: Implement own data sink for responses
> Merge 'file: recursive_remove_directory: general cleanup' from Avi Kivity
file: do_recursive_remove_directory(): move object when popping from queue
file: do_recursive_remove_directory(): adjust indentation
file: do_recursive_remove_directory(): coroutinize
file: do_recursive_remove_directory(): simplify conditional
file: do_recursive_remove_directory(): remove wrong const
file: do_recursive_remove_directory(): clean up work_entry
> tests: Move thread_context_switch_test into perf/
> test: Add unit test for append_challenged_posix_file
> Merge 'Prometheus metrics handler optimization' from Travis Downs
prometheus: optimize metrics aggregation
prometheus: move and test aggregate_by helper
prometheus: various optimizations
metrics: introduce escaped_string for label values
metric:value: implement + in terms of +=
tests: add prometheus text format acceptance tests
extract memory_data_sink.hh
metrics_perf: enhance metrics bench
> demos: Simplify udp_zero_copy_demo's way of preparing the packet
> metrics: Remove deprecated make_...-ers
> Merge 'Make slab_test be BOOST kind' from Pavel Emelyanov
test: Use BOOST_REQUIRE checkers
test: Replace some SEASTAR_ASSERT-s with static_assert-s
test: Convert slab test into boost kind
> Merge 'Coroutinize lister_test' from Pavel Emelyanov
test: Fix indentation after previuous patch
test: Coroutinize lister_test lister::report() method
test: Coroutinize lister_test main code
> file: recursive_remove_directory(): use a list instead of a deque
> Merge 'Stop using packets in tls data_sink and session' from Pavel Emelyanov
tls: Stop using net::packet in session::put()
tls: Fix indentation after previous patch
tls: Split session::do_put()
tls: Mark some session methods private
Closesscylladb/scylladb#27240
After in the previous patch we implemented support in Alternator for
gzip-compressed requests ("Content-Encoding: gzip"), here we enable
an existing xfail-ing test for this feature, and also add more tests
for more cases:
* A test for longer compressed requests, or a short compressed
request which expands to a longer request. Since the decompression
uses small buffers, this test reaches additional code paths.
* Check for various cases of a malformed gzip'ed request, and also
an attempt to use an unsupported Content-Encoding. DynamoDB
returns error 500 for both cases, so we want to test that we
do to - and not silently ignore such errors.
* Check that two concatenated gzip'ed streams is a valid request,
and check that garbage at the end of the gzip - or a missing
character at the end of the gzip - is recognized as an error.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
The PRUNE MATERALIZED VIEW statement is performed as follows:
1. Perform a range scan of the view table from the view replicas based
on the ranges specified in the statement.
2. While reading the paged scan above, for each view row perform a read
from all base replicas at the corresponding primary key. If a discrepancy
is detected, delete the row in the view table.
When reading multiple rows, this is very slow because for each view row
we need to performe a single row query on multiple replicas.
In this patch we add an option to speed this up by performing many of the
single base row reads concurrently, at the concurrency specified in the
USING CONCURRENCY clause.
Fixes https://github.com/scylladb/scylladb/issues/27070
Commit 6e4803a750 broke notification about expired erms held for too long since it resets the tracker without calling its destructor (where notification is triggered). Fix the assign operator to call the destructor like it should.
Fixes https://github.com/scylladb/scylladb/issues/27141Closesscylladb/scylladb#27140
* https://github.com/scylladb/scylladb:
test: test that expired erm that held for too long triggers notification
token_metadata: fix notification about expiring erm held for to long
Prepare for use in a subsequent commit in group0_state_machine,
where the auth cache will be integrated. This follows the same
pattern as updates to the service-level cache, view-building
state, and CDC streams.
