When the view builder starts to build a new view, each shard registers
itself by writing the shard id and current token to the
scylla_views_builds_in_progress table.
Previously, this happened independently by each shard. We change it now
to register all shards "atomically" - when a shard registers itself, it
also registers all other shards with an empty status, if they aren't
registered yet. This ensures that we don't have a partial state in the
table where only some of the shards are registered, but we always have a
status for all shards.
The reason we want to register all shards atomically is that if it
happens that only some of the shards were registered, then we restart
and load the status from table, this doesn't work well for multiple
reasons.
One example is that to know how many shards we had previously, we take
the maximum shard id we see in the table. If it's different than the
current shard count, we will execute the reshard code. But of course, if
the last shard is missing from the table because it didn't register
itself, this calculation will be wrong, and we can't know the previous
number of shards.
This is a problem because suppose we have two shards, and shard 0
finished building the view but shard 1 didn't start. When we come up, we
will think that previously we had only a single shard and it completed
building everything, when in fact we built only half the view
approximately. The problem is that we don't have enough information in
the tables to know that.
There are additional problems related to reshard. In the reshard
function, whether it is executed because we actually do node reshard or
because we calculated the wrong number of previous shards, if the status
of some shard is missing then the calculation of new ranges will be
wrong. When some shard didn't make progress we should start building the
view from scratch. However, this doesn't happen if we don't have a
status for the shard, because the code looks only for shards that have a
status. In effect, this shard is considered complete even though it
didn't start. This could cause the view building to get stuck or
complete without building all tokens ranges.
By registering all shards atomically, this should solve the above
problems because we will always have statuses for all shards.
Fixesscylladb/scylladb#22989
Some tests want to switch between sched groups. For that there's
cql-test-env facility to create and use them. However, there's a test
that uses replica::database as sched groups provider, which is not nice.
Fix it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#24615
rather then macros.
This is a first cleanup step before adding a sleep function
parameter to support also manual_clock.
Also, add a call to BOOST_REQUIRE_EQUAL/BOOST_CHECK_EQUAL,
respectively, to make an error more visible in the test log
since those entry points print the offending values
when not equal.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
To reduce test executable size and speed up compilation time, compile unit
tests into a single executable.
Here is a file size comparison of the unit test executable:
- Before applying the patch
$ du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
11G build/release/test/boost/
29G build/debug/test/boost/
- After applying the patch
du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
5.5G build/release/test/boost/
19G build/debug/test/boost/
It reduces executable sizes 5.5GB on release, and 10GB on debug.
Closes#9155Closesscylladb/scylladb#21443
now that we are able to use ranges library provided by the C++
standard library. there is no need to use the homebrew `ranges::to()`.
in this change, we switch to `std::ranges::to()` in favor of
`ranges::to()`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
Everything, but perf test is straightforward switch.
The perf-test generated regular columns dynamically via vector, with
builder the vector goes away.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
before this change, when building the test of `view_build_test` with
clang-20, we can have following build failure:
```
FAILED: test/boost/CMakeFiles/view_build_test.dir/Debug/view_build_test.cc.o
/home/kefu/.local/bin/clang++ -DBOOST_ALL_DYN_LINK -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TESTING_MAIN -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -isystem /home/kefu/dev/scylladb/build/rust -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=westmere -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -fno-sanitize=vptr -MD -MT test/boost/CMakeFiles/view_build_test.dir/Debug/view_build_test.cc.o -MF test/boost/CMakeFiles/view_build_test.dir/Debug/view_build_test.cc.o.d -o test/boost/CMakeFiles/view_build_test.dir/Debug/view_build_test.cc.o -c /home/kefu/dev/scylladb/test/boost/view_build_test.cc
/home/kefu/dev/scylladb/test/boost/view_build_test.cc:998:5: error: unknown type name 'simple_schema'
998 | simple_schema ss;
| ^
```
apparently, `simple_schema`'s declaration is not available in this
translation unit.
in this change
* we include the header where `simple_schema` is defined, so that
the build passes with clang-20.
* also take this opportunity to reorder the header a little bit,
so the testing headers are grouped together.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20367
flat_mutation_reader_v2 was introduced in a pair of commits in 2021:
e3309322c3 "Clone flat_mutation_reader related classes into v2 variants"
08b5773c12 "Adapt flat_mutation_reader_v2 to the new version of the API"
as a replacement for flat_mutation_reader, using range_tombstone_change
instead of range_tombstone to represent represent range tombstones. See
those commits for more information.
The transition was incremental; the last use of the original
flat_mutation_reader was removed in 2022 in commit
026f8cc1e7 "db: Use mutation_partition_v2 in mvcc"
In turn, flat_mutation_reader was introduced in 2017 in commit
748205ca75 "Introduce flat_mutation_reader"
To transition from a mutation_reader that nested rows within
a partition in a separate stream, to a flat reader that streamed
partitions and rows in the same stream.
Here, we reclaim the original name and rename the awkward
flat_mutation_reader_v2 to mutation_reader.
Note that mutation_fragment_v2 remains since we still use the original
for compatibilty, sometimes.
Some notes about the transition:
- files were also renamed. In one case (flat_mutation_reader_test.cc), the
rename target already existed, so we rename to
mutation_reader_another_test.cc.
- a namespace 'mutation_reader' with two definitions existed (in
mutation_reader_fwd.hh). Its contents was folded into the mutation_reader
class. As a result, a few #includes had to be adjusted.
Closesscylladb/scylladb#19356
this change was created in the same spirit of 505900f18f. because
we are deprecating the operator<< for vector and unorderd_map in
Seastar, some tests do not compile anymore if we disable these
operators. so to be prepared for the change disabling them, let's
include test/lib/test_utils.hh for accessing the printer dedicated
for Boost.test. and also '#include <fmt/ranges.h>' when necessary,
because, in order to format the ranges using {fmt}, we need to
use fmt/ranges.h.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Our interval template started life as `range`, and was supported
wrapping to follow Cassandra's convention of wrapping around the
maximum token.
We later recognized that an interval type should usually be non-wrapping
and split it into wrapping_range and nonwrapping_range, with `range`
aliasing wrapping_range to preserve compatibility.
Even later, we realized the name was already taken by C++ ranges and
so renamed it to `interval`. Given that intervals are usually non-wrapping,
the default `interval` type is non-wrapping.
We can now simplify it further, recognizing that everyone assumes
that an interval is non-wrapping and so doesn't need the
nonwrapping_interval_designation. We just rename nonwrapping_interval
to `interval` and remove the type alias.
range.hh was deprecated in bd794629f9 (2020) since its names
conflict with the C++ library concept of an iterator range. The name
::range also mapped to the dangerous wrapping_interval rather than
nonwrapping_interval.
Complete the deprecation by removing range.hh and replacing all the
aliases by the names they point to from the interval library. Note
this now exposes uses of wrapping intervals as they are now explicit.
The unit tests are renamed and range.hh is deleted.
Closesscylladb/scylladb#17428
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Store schema_ptr in reader permit instead of storing a const pointer to
schema to ensure that the schema doesn't get changed elsewhere when the
permit is holding on to it. Also update the constructors and all the
relevant callers to pass down schema_ptr instead of a raw pointer.
Fixes#16180
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#16658
There's one in the utils that creates lw_shared_ptr<memtable> and
applies provided vector of mutations into it. Lots of other test cases
do literally the same by hand.
The make_memtable() assumes that the caller is sitting in the seastar
thread, and all the test cases that can benfit from it already are.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
A test reproducing #14819, that is, the view update builder not flushing
the buffer when only empty partitions are consumed (with only a
tombstone in them).
By making it independent of the number of units the view update
generator's registration semaphore is created with. We want to increase
this number significantly and that would destabilize this test
significantly. To prevent this, detach the test from the number of units
completely, while stil preserving the original intent behind it, as best
as it could be determined.
Closes#14727
This reverts commit d3034e0fab.
The test modified by this commit
(view_build_test.test_view_update_generator_register_semaphore_unit_leak)
often fails, breaking build jobs.
When repair writes a sstable to disk, we check if the sstable needs view
update processing. If yes, the sstable will be placed into the staging
dir for processing, with the _registration_sem semaphore to prevent too
many pending unprocessed sstables.
We have seen multiple cases in the field where view update processing is
inefficient and way too slow which blocks the base table repair to
finish on time.
This patch increases the registration_queue_size to a bigger number to
mitigate the problem that slow view update processing blocks repair.
It is better to have a consistent base table + inconsistent view table
than inconsistent base table + inconsistent view table.
Currently, sstables in staging dir are not compacted. So we could not
increase the _registration_sem with too big number to avoid accumulate
too many sstables.
The view_build_test.cc is updated to make the test pass.
Closes#14241
This patch adds a full-range tombstone to the compacted mutation.
This raises the coverage of the test. In particular, it reproduces
issue #14503, which should have been caught by this test, but wasn't.
In that level no io_priority_class-es exist. Instead, all the IO happens
in the context of current sched-group. File API no longer accepts prio
class argument (and makes io_intent arg mandatory to impls).
So the change consists of
- removing all usage of io_priority_class
- patching file_impl's inheritants to updated API
- priority manager goes away altogether
- IO bandwidth update is performed on respective sched group
- tune-up scylla-gdb.py io_queues command
The first change is huge and was made semi-autimatically by:
- grep io_priority_class | default_priority_class
- remove all calls, found methods' args and class' fields
Patching file_impl-s is smaller, but also mechanical:
- replace io_priority_class& argument with io_intent* one
- pass intent to lower file (if applicatble)
Dropping the priority manager is:
- git-rm .cc and .hh
- sed out all the #include-s
- fix configure.py and cmakefile
The scylla-gdb.py update is a bit hairry -- it needs to use task queues
list for IO classes names and shares, but to detect it should it checks
for the "commitlog" group is present.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13963
The test case tries to be "correct" and calls sst->write_components()
with streaming priority class. It's a test anyway, no need to be too
diligent here
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
No point in going through the vector<mutation> entry-point
just to discover in run time that it was called
with a single-element vector, when we know that
in advance.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closes#13733
And propagate it down to where it is created. This will be used to add
trace points for semaphore related events, but this will come in the
next patches.
The initial intent was to reduce the fanout of shared_sstable.hh through
v.u.g.hh -> cql_test_env.hh chain, but it also resulted in some shots
around v.u.g.hh -> database.hh inclusion.
By and large:
- v.u.g.hh doesn't need database.hh
- cql_test_env.hh doesn't need v.u.g.hh (and thus -- the
shared_sstable.hh) but needs database.hh instead
- few other .cc files need v.u.g.hh directly as they pulled it via
cql_test_env.hh before
- add forward declarations in few other places
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#12952
Schema related files are moved there. This excludes schema files that
also interact with mutations, because the mutation module depends on
the schema. Those files will have to go into a separate module.
Closes#12858
We currently have two method families to generate partition keys:
* make_keys() in test/lib/simple_schema.hh
* token_generation_for_shard() in test/lib/sstable_utils.hh
Both work only for schemas with a single partition key column of `text` type and both generate keys of fixed size.
This is very restrictive and simplistic. Tests, which wanted anything more complicated than that had to rely on open-coded key generation.
Also, many tests started to rely on the simplistic nature of these keys, in particular two tests started failing because the new key generation method generated keys of varying size:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same size. This makes some sense in the case of the key count estimation test, but makes no sense at all to me in the case of the sstable run test.
Closes#12657
* github.com:scylladb/scylladb:
test/lib/sstable_utils: remove now unused token_generation_for_shard() and friends
test/lib/simple_schema: remove now unused make_keys() and friends
test: migrate to tests::generate_partition_key[s]()
test/lib/test_services: add table_for_tests::make_default_schema()
test/lib: add key_utils.hh
test/lib/random_schema.hh: value_generator: add min_size_in_bytes
The system_keyspace defines several auxiliary methods to help view_builder update system.scylla_views_builds_in_progress and system.built_views tables. All use global qctx thing.
It only takes adding view_builder -> system_keyspace dependency in order to de-static all those helpers and let them use query-processor from it, not the qctx.
Closes#12728
* github.com:scylladb/scylladb:
system_keysace: De-static calls that update view-building tables
storage_service: Coroutinize mark_existing_views_as_built()
api: Unset column_famliy endpoints
api: Carry sharded<db::system_keyspace> reference over
view_builder: Add system_keyspace dependency
There's a bunch of them used by mainly view_builder and also by the API
and storage_service. All use global qctx to make its job, now when the
callers have main-local sharded<system_keysace> references they can be
made non-static.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Use the newly introduced key generation facilities, instead of the the
old inflexible alternatives and hand-rolled code.
Most of the migrations are mechanic, but there are two tests that
were tricky to migrate:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same
size. This makes some sense in the case of the key count estimation
test, but makes no sense at all to me in the case of the sstable run
test.
These methods will soon be retired (made private) so migrate away from
them. Consume memory through a permit instead. It is also safer this
way: all memory consumed through the permit is guaranteed to be released
when the permit is destroyed at the latest.
The flat_mutation_reader files were conflated and contained multiple
readers, which were not strictly necessary. Splitting optimizes both
iterative compilation times, as touching rarely used readers doesn't
recompile large chunks of codebase. Total compilation times are also
improved, as the size of flat_mutation_reader.hh and
flat_mutation_reader_v2.hh have been reduced and those files are
included by many file in the codebase.
With changes
real 29m14.051s
user 168m39.071s
sys 5m13.443s
Without changes
real 30m36.203s
user 175m43.354s
sys 5m26.376s
Closes#10194
Memtables are a replica-side entity, and so are moved to the
replica module and namespace.
Memtables are also used outside the replica, in two places:
- in some virtual tables; this is also in some way inside the replica,
(virtual readers are installed at the replica level, not the
cooordinator), so I don't consider it a layering violation
- in many sstable unit tests, as a convenient way to create sstables
with known input. This is a layering violation.
We could make memtables their own module, but I think this is wrong.
Memtables are deeply tied into replica memory management, and trying
to make them a low-level primitive (at a lower level than sstables) will
be difficult. Not least because memtables use sstables. Instead, we
should have a memtable-like thing that doesn't support merging and
doesn't have all other funky memtable stuff, and instead replace
the uses of memtables in sstable tests with some kind of
make_flat_mutation_reader_from_unsorted_mutations() that does
the sorting that is the reason for the use of memtables in tests (and
live with the layering violation meanwhile).
Test: unit (dev)
Closes#10120
Not a completely mechanical transition. The consumer has to generate its
mutation via a mutation_rebuilder_v2 as mutation fragment v2 cannot be
applied to mutations directly yet.
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
