Every table and sstable set keeps track of the total file size
of contained sstables.
Due to a feature request, we also want to keep track of the hypothetical
file size if Data files were uncompressed, to add a metric that
shows the compression ratio of sstables.
We achieve this by replacing the relevant `uint_64 bytes_on_disk`
counters everywhere with a struct that contains both the actual
(post-compression) size and the hypothetical pre-compression size.
This patch isn't supposed to change any observable behavior.
In the next patch, we will use these changes to add a new metric.
The directory utils/ is supposed to contain general-purpose utility
classes and functions, which are either already used across the project,
or are designed to be used across the project.
This patch moves 8 files out of utils/:
utils/advanced_rpc_compressor.hh
utils/advanced_rpc_compressor.cc
utils/advanced_rpc_compressor_protocol.hh
utils/stream_compressor.hh
utils/stream_compressor.cc
utils/dict_trainer.cc
utils/dict_trainer.hh
utils/shared_dict.hh
These 8 files together implement the compression feature of RPC.
None of them are used by any other Scylla component (e.g., sstables have
a different compression), or are ready to be used by another component,
so this patch moves all of them into message/, where RPC is implemented.
Theoretically, we may want in the future to use this cluster of classes
for some other component, but even then, we shouldn't just have these
files individually in utils/ - these are not useful stand-alone
utilities. One cannot use "shared_dict.hh" assuming it is some sort of
general-purpose shared hash table or something - it is completely
specific to compression and zstd, and specifically to its use in those
other classes.
Beyond moving these 8 files, this patch also contains changes to:
1. Fix includes to the 5 moved header files (.hh).
2. Fix configure.py, utils/CMakeLists.txt and message/CMakeLists.txt
for the three moved source files (.cc).
3. In the moved files, change from the "utils::" namespace, to the
"netw::" namespace used by RPC. Also needed to change a bunch
of callers for the new namespace. Also, had to add "utils::"
explicitly in several places which previously assumed the
current namespace is "utils::".
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#25149
Partitions.db internally uses a piece of the partition key murmur
hash (the same hash which is used to compute the token and the
relevant bits in the bloom filter). Before this patch,
the Partitions.db writer computes the hash internally from the
`sstables::partition_key`.
That's a waste, because this hash is also computed for bloom filter
purposes just before that, in the owning sstable writer.
So in this patch we let the caller pass that hash here instead.
The namespace usage in this directory is very inconsistent, with files
and classes scattered in:
* global namespace
* namespace compaction
* namespace sstables
With cases, where all three used in the same file. This code used to
live in sstables/ and some of it still retains namespace sstables as a
heritage of that time. The mismatch between the dir (future module) and
the namespace used is confusing, so finish the migration and move all
code in compaction/ to namespace compaction too.
This patch, although large, is mechanic and only the following kind of
changes are made:
* replace namespace sstable {} with namespace compaction {}
* add namespace compaction {}
* drop/add sstables::
* drop/add compaction::
* move around forward-declarations so they are in the correct namespace
context
This refactoring revealed some awkward leftover coupling between
sstables and compaction, in sstables/sstable_set.cc, where the
make_sstable_set() methods of compaction strategies are implemented.
The latter is recommended in seastar, and the former was left as
compatibility alias. Latest seastar explicitly marks it as deprecated so
once the submodule is updated, compilation logs will explode.
Most of the patch is generated with
for f in $(git grep -l '\<distributed<[A-Za-z0-9:_]*>') ; do sed -e 's/\<distributed<\([A-Za-z0-9:_]*\)>/sharded<\1>/g' -i $f; done
for f in $(git grep -l distributed.hh); do sed -e 's/distributed.hh/sharded.hh/' -i $f ; done
and a small manual change in test/perf/perf.hh
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26136
Before this patch, `reader_permit` taken by `bti_index_reader`.
wasn't actually being passed down to disk reads. In this patch,
we fix this FIXME by propagating the permit down to the I/O
operations on the `cached_file`.
Also, it didn't take `trace_state_ptr` at all.
In this patch, we add a `trace_state_ptr` argument and propagate
it down to disk reads.
(We combine the two changes because the permit and the trace state
are passed together everywhere anyway).
Before this patch, `bti_index_reader` doesn't have a good
way to implement BYPASS CACHE.
In this patch we add a way, similar to what `index_reader` does:
we allow the caller to pass in the `cached_file` via a shared pointer.
If the caller wants the loads done by the index reader to remain cached,
he can pass in the `cached_file` owned by the `sstable`, shared by all
caching index readers.
If the caller doesn't want the loads to remain cached, he can pass
in a fresh `cached_file` which will be privately owned by the index
reader, and will be evicted when the index reader dies.
Let's return `bti_partitions_db_footer` so that it can be directly
saved to `sstables::shareable_components` after the index write is
finished, without re-reading the footer from the file.
Let's take `const sstables::key&` arguments instead of
`disk_string_view<uint16_t>`, that's more natural.
Adds a heavy test which tests compatibility of BTI index files
between Cassandra and Scylla.
It's composed from a C++ part, used to read and write BTI files
with Scylla's readers and writers,
and a Python part which uses a Cassandra node and the C++
executable to make them read and write each other's files.
The stages of the test are:
1. Use the C++ part to generate a random BIG sstable, and matching
BTI index files.
2. Import the BIG files into Cassandra, let it generate its own
BTI index files.
3. Read both Scylla's BTI and Cassandra's BTI index files using
the C++ part. Check that they return the right positions
and tombstones for each partition and row.
4. Sneakily swap Cassandra's BTI files for Scylla's BTI files,
and query Cassandra (via CQL) for each row. Check that each query returns
the right result.
Not much can be inferred about the index via CQL queries,
so the check we are doing on Cassandra is relatively weak.
But in conjunction with the checks done on the Scylla part,
it's probably good enough.
The test is weird enough, and with heavy-enough dependencies
(it uses a podman container to run the Cassandra) that
ith has been put in test/manual.
To run the test, build
`build/$build_mode/test/manual/bti_cassandra_compatibility_test_g`,
and run `python test/manual/bti_cassandra_compatibility_test.py`.
Note: there's a lot of things that could go wrong in this test.
(E.g. file permission issues or port mapping issues due to the container
usage, incompatibilities between the Python driver and the random CQL
values generated by generate_random_mutations, etc).
I hope it works everywhere, but I only tested it on my machine,
running it inside the dbuild container.
The following steps are performed in sequence as part of the
Raft-based recovery procedure:
- set `recovery_leader` to the host ID of the recovery leader in
`scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- perform a rolling restart (with the recovery leader being restarted
first).
These steps are not intuitive and more complicated than they could be.
In this PR, we simplify these steps. From now on, we will be able to
simply set `recovery_leader` on each node just before restarting it.
Apart from making necessary changes in the code, we also update all
tests of the Raft-based recovery procedure and the user-facing
documentation.
Fixesscylladb/scylladb#25015
The Raft-based procedure was added in 2025.2. This PR makes the
procedure simpler and less error-prone, so it should be backported
to 2025.2 and 2025.3.
Closesscylladb/scylladb#25032
* github.com:scylladb/scylladb:
docs: document the option to set recovery_leader later
test: delay setting recovery_leader in the recovery procedure tests
gossip: add recovery_leader to gossip_digest_syn
db: system_keyspace: peers_table_read_fixup: remove rows with null host_id
db/config, gms/gossiper: change recovery_leader to UUID
db/config, utils: allow using UUID as a config option
In the new Raft-based recovery procedure, live nodes join the new
group 0 one by one during a rolling restart. There is a time window when
some of them are in the old group 0, while others are in the new group
0. This causes a group 0 mismatch in `gossiper::handle_syn_msg`. The
current solution for this problem is to ignore group 0 mismatches if
`recovery_leader` is set on the local node and to ask the administrator
to perform the rolling restart in the following way:
- set `recovery_leader` in `scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- proceed with the rolling restart.
This commit makes `gossiper::handle_syn_msg` ignore group 0 mismatches
when exactly one of the two gossiping nodes has `recovery_leader` set.
We achieve this by adding `recovery_leader` to `gossip_digest_syn`.
This change makes setting `recovery_leader` earlier on all nodes and
reloading the config unnecessary. From now on, the administrator can
simply restart each node with `recovery_leader` set.
However, note that nodes that join group 0 must have `recovery_leader`
set until all nodes join the new group 0. For example, assume that we
are in the middle of the rolling restart and one of the nodes in the new
group 0 crashes. It must be restarted with `recovery_leader` set, or
else it would reject `gossip_digest_syn` messages from nodes in the old
group 0. To avoid problems in such cases, we will continue to recommend
setting `recovery_leader` in `scylla.yaml` instead of passing it as
a command line argument.
Instead of requesting it from gms code, create it "by hand" with the
help of get_disabled_features_from_db_config() method. This is how other
services are configured by main/tools/testing code.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Currently send_gossip_echo has a 22 seconds timeout
during which _abort_source is ignored.
Mark the verb as cancellable so it can be canceled
on shutdown / abort.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Store endpoint's IP in the endpoint state. Currently it is stored as a key
in gossiper's endpoint map, but we are going to change that. The new filed
is not serialized when endpoint state is sent over rpc, so it is set by
the rpc handler from the value in the map that is in the rpc message. This
map will not be changed to be host id based to not break interoperability.
Send digest ack and ack2 by host ids as well now since the id->ip
mapping is available after receiving digest syn. It allows to convert
more code to host id here.
We want to move to use host ids as soon as possible. Currently it is
possible only after the full gossiper exchange (because only at this
point gossiper state is added and with it address map entry). To make it
possible to move to host ids earlier this patch adds address map entries
on incoming communication during CLIENT_ID verb processing. The patch
also adds generation to CLIENT_ID to use it when address map is updated.
It is done so that older gossiper entries can be overwritten with newer
mapping in case of IP change.
Drop it from files that obviously don't need it. Also kill some forward
declarations while at it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#22979
This commit eliminates unused boost header includes from the tree.
Removing these unnecessary includes reduces dependencies on the
external Boost.Adapters library, leading to faster compile times
and a slightly cleaner codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22857
We want to drop ips from token_metadata so move to use host id based
counterparts. Messaging service gets a function that maps from ips to id
when is starts listening.
In order to make sure that the scheduling group carries over RPC, and
also to prevent priority inversion issues between different service
levels, modify the messaging service to use separate RPC connections for
each service level in order to serve user traffic.
The above is achieved by reusing the existing concept of "tenants" in
messaging service: when a new service level (or, more accurately,
service-level specific scheduling group) is first used in an RPC, a
new tenant is created.
In addition, extend the service level controller to be able to quickly
look up the service level name of the currently active scheduling group
in order to speed up the logic for choosing the tenant.
This patch sets up an `alien_worker`, `advanced_rpc_compression::tracker`,
`dict_sampler` and `dictionary_service` in `main()`, and wires them to each other
and to `messaging_service`.
`messaging_service` compresses its network traffic with compressors managed by
the `advanced_rpc_compression::tracker`. All this traffic is passed as a single
merged "stream" through `dict_sampler`.
`dictionary_service` has access to `dict_sampler`.
On chosen nodes (by default: the Raft leader), it uses the sampler to maintain
a random multi-megabyte sample of the sampler's stream. Every several minutes,
it copies the sample, trains a compression dictionary on it (by calling zstd's
training library via the `alien_worker` thread) and publishes the new dictionary
to `system.dicts` via Raft.
This update triggers a callback into `advanced_rpc_compression::tracker` on all nodes,
which updates the dictionary used by the compressors it manages.
"
This rather large patch series moves storage proxy and some adjacent
services (like migration manager) to use host ids to identify nodes rather
than ips. Messaging service gains a capability to address nodes by host
ids (which allows dropping translations from topology coordinator code
that worked on host ids already) and also makes sure that a node with
incorrect host id will reject a message (can happen during address
changes).
The series gets rid of the raft address map completely and replaces it with
the gossiper address map which is managed by the gossiper since translation
is now done in the layer below raft.
Fixes: scylladb/scylladb#6403
perf-simple-query -- smp 1 -m 1G output
Before:
enable-cache=1
Running test with config: {partitions=10000, concurrency=100, mode=read, frontend=cql, query_single_key=no, counters=no}
Disabling auto compaction
Creating 10000 partitions...
64336.82 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 41291 insns/op, 24485 cycles/op, 0 errors)
62669.58 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 41277 insns/op, 24695 cycles/op, 0 errors)
69172.12 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.2 tasks/op, 41326 insns/op, 24463 cycles/op, 0 errors)
56706.60 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 41143 insns/op, 24513 cycles/op, 0 errors)
56416.65 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 41186 insns/op, 24851 cycles/op, 0 errors)
throughput: mean=61860.35 standard-deviation=5395.48 median=62669.58 median-absolute-deviation=5153.75 maximum=69172.12 minimum=56416.65
instructions_per_op: mean=41244.62 standard-deviation=76.90 median=41276.94 median-absolute-deviation=58.55 maximum=41326.19 minimum=41142.80
cpu_cycles_per_op: mean=24601.35 standard-deviation=167.39 median=24512.64 median-absolute-deviation=116.65 maximum=24851.45 minimum=24462.70
After:
enable-cache=1
Running test with config: {partitions=10000, concurrency=100, mode=read, frontend=cql, query_single_key=no, counters=no}
Disabling auto compaction
Creating 10000 partitions...
65237.35 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.2 tasks/op, 40733 insns/op, 23145 cycles/op, 0 errors)
59283.09 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 40624 insns/op, 23948 cycles/op, 0 errors)
70851.03 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 40625 insns/op, 23027 cycles/op, 0 errors)
70549.61 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 40650 insns/op, 23266 cycles/op, 0 errors)
68634.96 tps ( 63.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 40622 insns/op, 22935 cycles/op, 0 errors)
throughput: mean=66911.21 standard-deviation=4814.60 median=68634.96 median-absolute-deviation=3638.40 maximum=70851.03 minimum=59283.09
instructions_per_op: mean=40650.89 standard-deviation=47.55 median=40624.60 median-absolute-deviation=27.11 maximum=40733.37 minimum=40622.33
cpu_cycles_per_op: mean=23264.16 standard-deviation=402.12 median=23145.29 median-absolute-deviation=237.63 maximum=23947.96 minimum=22934.59
CI: https://jenkins.scylladb.com/job/scylla-master/job/scylla-ci/13531/
SCT (longevity-100gb-4h with nemesis_selector: ['topology_changes']): https://jenkins.scylladb.com/view/staging/job/scylla-staging/job/gleb/job/move-to-host-id/3/
Tested mixed cluster manually.
"
* 'gleb/move-to-host-id-v2' of github.com:scylladb/scylla-dev: (55 commits)
group0: drop unused field from replace_info struct
test: rename raft_address_map_test to address_map_test and move if from raft tests
raft_address_map: remove raft address map
topology coordinator: do not modify expire state for left/new nodes any more in raft address map
topology coordinator: drop expiring entries in gossiper address map on error injections since raft one is no longer used
group0: drop raft address map dependency from raft_rpc
group0: move raft_ticker_type definition from raft_address_map.hh
storage_service: do not update raft address map on gossiper events
group0: drop raft address map dependency from raft_server_with_timeouts
group0: move group0 upgrade code to host ids
repair: drop raft address map dependency
group0: remove unused raft address map getter from raft_group0
group0: drop raft address map from group0_state_machine dependency since it is not used there any more
group0: remove dependency on raft address map from group0_state_id_handler
gossiper: add get_application_state_ptr that searches by host_id
gossiper: change get_live_token_owners to return host ids
view: move view building to host id
hints: use host id to send hints
storage_proxy: remove id_vector_to_addr since it is no longer used
db: consistency_level: change is_sufficient_live_nodes to work on host ids
...
now that we are allowed to use C++23. we now have the luxury of using
`std::views::transform`.
in this change, we:
- replace `boost::adaptors::transformed` with `std::views::transform`
- use `fmt::join()` when appropriate where `boost::algorithm::join()`
is not applicable to a range view returned by `std::view::transform`.
- use `std::ranges::fold_left()` to accumulate the range returned by
`std::view::transform`
- use `std::ranges::fold_left()` to get the maximum element in the
range returned by `std::view::transform`
- use `std::ranges::min()` to get the minimal element in the range
returned by `std::view::transform`
- use `std::ranges::equal()` to compare the range views returned
by `std::view::transform`
- remove unused `#include <boost/range/adaptor/transformed.hpp>`
- use `std::ranges::subrange()` instead of `boost::make_iterator_range()`,
to feed `std::views::transform()` a view range.
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
limitations:
there are still a couple places where we are still using
`boost::adaptors::transformed` due to the lack of a C++23 alternative
for `boost::join()` and `boost::adaptors::uniqued`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21700
The function looks up provided host id in gossip_address_map and throws
unknown_address if the mapping is not available. Otherwise it sends the
message by IP found.
now that we are allowed to use C++23. we now have the luxury of using
`std::ranges::find_if`.
in this change, we:
- replace `boost::find_if` with `std::ranges::find_if`
- remove all `#include <boost/range/algorithm/find_if.hpp>`
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
The later includes the former and in addition to `seastar::format()`,
`print.hh` also provides helpers like `seastar::fprint()` and
`seastar::print()`, which are deprecated and not used by scylladb.
Previously, we include `seastar/core/print.hh` for using
`seastar::format()`. and in seastar 5b04939e, we extracted
`seastar::format()` into `seastar/core/format.hh`. this allows us
to include a much smaller header.
In this change, we just include `seastar/core/format.hh` in place of
`seastar/core/print.hh`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21574
before this change, we build some tests as if they are Seastar tests.
but after 415c83fa, these tests failed to link. because the
Seastar::seastar_testing does not expose `-DSEASTAR_TESTING_MAIN` in
its cflags. the behavior of the Seastar::seastar_testing is expected.
because a test linking against this library is not necessarily driven
by the `main()` provided by `testing/seastar_test.hh`.
so, in this change, we correct the `KIND` parameter of these tests,
so that they use `KIND BOOST`, as these tests can be driven by the
`main()` provided by Boost.Test's driver. also there are some tests
driven by Boost.Test's `main()`, but in the meanwhile, they utilize
seastar_testing, so let's add `Seastar::seastar_testing` to their
`LIBRARIES`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21183
the log.hh under the root of the tree was created keep the backward
compatibility when seastar was extracted into a separate library.
so log.hh should belong to `utils` directory, as it is based solely
on seastar, and can be used all subsystems.
in this change, we move log.hh into utils/log.hh to that it is more
modularized. and this also improves the readability, when one see
`#include "utils/log.hh"`, it is obvious that this source file
needs the logging system, instead of its own log facility -- please
note, we do have two other `log.hh` in the tree.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
assert() is traditionally disabled in release builds, but not in
scylladb. This hasn't caused problems so far, but the latest abseil
release includes a commit [1] that causes a 1000 insn/op regression when
NDEBUG is not defined.
Clearly, we must move towards a build system where NDEBUG is defined in
release builds. But we can't just define it blindly without vetting
all the assert() calls, as some were written with the expectation that
they are enabled in release mode.
To solve the conundrum, change all assert() calls to a new SCYLLA_ASSERT()
macro in utils/assert.hh. This macro is always defined and is not conditional
on NDEBUG, so we can later (after vetting Seastar) enable NDEBUG in release
mode.
[1] 66ef711d68Closesscylladb/scylladb#20006
The series adds a step during node's boot process, just before completing
the initialization, in which the node sends a notification to all other
normal nodes in the cluster that it is UP now. Other nodes wait for this
node to be UP and in normal state before replying. This ensures that,
in a healthy cluster, when a node start serving queries the entire
cluster knows its up-to-date state. The notification is a best effort
though. If some nodes are down or do not reply in time the boot process
continues. It is somewhat similar to shutdown notification in this regard.
* 'gleb/notify-up-v2' of github.com:scylladb/scylla-dev:
gossiper: wait for a bootstrapping node to be seen as normal on all nodes before completing initialization
Wait for booting node to be marked UP before complete booting.
gossiper: move gossip verbs to the idl
flat_mutation_reader_v2 was introduced in a pair of commits in 2021:
e3309322c3 "Clone flat_mutation_reader related classes into v2 variants"
08b5773c12 "Adapt flat_mutation_reader_v2 to the new version of the API"
as a replacement for flat_mutation_reader, using range_tombstone_change
instead of range_tombstone to represent represent range tombstones. See
those commits for more information.
The transition was incremental; the last use of the original
flat_mutation_reader was removed in 2022 in commit
026f8cc1e7 "db: Use mutation_partition_v2 in mvcc"
In turn, flat_mutation_reader was introduced in 2017 in commit
748205ca75 "Introduce flat_mutation_reader"
To transition from a mutation_reader that nested rows within
a partition in a separate stream, to a flat reader that streamed
partitions and rows in the same stream.
Here, we reclaim the original name and rename the awkward
flat_mutation_reader_v2 to mutation_reader.
Note that mutation_fragment_v2 remains since we still use the original
for compatibilty, sometimes.
Some notes about the transition:
- files were also renamed. In one case (flat_mutation_reader_test.cc), the
rename target already existed, so we rename to
mutation_reader_another_test.cc.
- a namespace 'mutation_reader' with two definitions existed (in
mutation_reader_fwd.hh). Its contents was folded into the mutation_reader
class. As a result, a few #includes had to be adjusted.
Closesscylladb/scylladb#19356
Currently a node does not wait to be marked UP by other nodes before
complete booting which creates a usability issue: during a rolling restart
it is not enough to wait for local CQL port to be opened before
restarting next node, but it is also needed to check that all other
nodes already see this node as alive otherwise if next node is restarted
some nodes may see two node as dead instead of one.
This patch improves the situation by making sure that boot process does
not complete before all other nodes do not see the booting one as alive.
This is still a best effort thing: if some nodes are unreachable or
gossiper propagation takes too much time the boot process continues
anyway.
Fixesscylladb/scylladb#19206
before this change, we rely on `seastar/util/std-compat.hh` to
include the used headers provided by stdandard library. this was
necessary before we moved to a C++20 compliant standard library
implementation. but since Seastar has dropped C++17 support. its
`seastar/util/std-compat.hh` is not responsible for providing these
headers anymore.
so, in this change, we include the used headers directly instead
of relying on `seastar/util/std-compat.hh`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18883
Continuation of the prevuous patch, but with its own flavor. There's a
manual test that wants to run seastar thread in statement scheduling
group and gets one from database. This patch makes it get the group from
cql-test-env and, while at it, makes it switch to that group using
thread attributes passed to async() method.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
in this change, we trade the `boost_test_print_type()` overloads
for the generic template of `boost_test_print_type()`, except for
those in the very small tests, which presumably want to keep
themselves relative self-contained.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18727
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we define formatters for `db::replay_position`,
and drop its operator<<.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#17014
Store schema_ptr in reader permit instead of storing a const pointer to
schema to ensure that the schema doesn't get changed elsewhere when the
permit is holding on to it. Also update the constructors and all the
relevant callers to pass down schema_ptr instead of a raw pointer.
Fixes#16180
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#16658
* seastar e0d515b6...70349b74 (33):
> util/log: drop unused function
> util/log, rpc, core: use compile-time formatting with fmtlib >= 8.0
> Fix edge case in memory sampler at OOM
> exp/geo distribution benchmark
> Additional allocation tests
> Remove null pointer check on free hot path
> Optimize final part of allocation hot path
> Optimize zero size checking in allocator
> memory: Optimize free fast path
> memory: Optimize small alloc alloation path
> memory: Limit alloc_sites size
> memory: Add general comment about sampling strategy
> memory: Use probabilistic sampler
> util: Adapt memory sampler to seastar
> util: Import Android Memory Sampler
> memory: Use separate small pool for tracking sampled allocations
> memory: Support enabling memory profiling at runtime
> util/source_location-compat: mark `source_location::current()` consteval
> build: use new behavior defined by CMP0155 when building C++ modules
> circleci: build with C++20 modules enabled
> seastar.cc: replace cryptopp with gnutls when building seastar modules
> alien: include used header
> seastar.cc: include used headers in the global purview
> docker: install clang-tools-17
> net/tcp: generate a random src_port hashed to current shard if smp::count > 1
> net, websocket: replace Crypto++ calls with GnuTLS
> README-DPDK.md: point user to DPDK's quick start guide
> reactor: print fatal error using logger as well
> Avoid ping-pong in spinlock::lock
> memory: Add allocator perf tests
> memory: Add a basic sized deletion test
> Prometheus: Disable Prometheus protobuf with a configuration
> treewide: bring back prometheus protobuf support
* test/manual/sstable_scan_footprint_test: update to adapt to the
breaking change of "memory: Use probabilistic sampler" in seastar
Closesscylladb/scylladb#16610
