Add ignore_component_digest_mismatch option to db::config (default false).
When set, sstable loading logs a warning instead of throwing on component
digest mismatches, allowing a node to start up despite corrupted non-vital
components or bugs in digest calculation.
Propagate the config to all production sstable load paths:
- distributed_loader (node startup, upload dir processing)
- storage_service (tablet storage cloning)
- sstables_loader (load-and-stream, download tasks, attach)
- stream_blob (tablet streaming)
File streaming only releases the file descriptors of a tablet being
streamed in the very streaming end. Which means that if the streaming
tablet has compaction on largest tier finished after streaming
started, there will be always ~2x space amplification for that
single tablet. Since there can be up to 4 tablets being migrated
away, it can add up to a significant amount, since nodes are pushed
to a substantial usage of available space (~90%).
We want to optimize this by dropping reference to a sstable after
it was fully streamed. This way, we reduce the chances of hitting
2x space amplification for a given tablet.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#28505
We want the invariant that after ACK, all sealed sstables will be split.
This guarantee that on restart, no unsplit sstables will be found
sealed.
The paths that generate unsplit sstables are streaming and file
streaming consumers. It includes intra-node streaming, which
is local but can clone an unsplit sstable into destination.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
That will be needed for file streaming to leave output sstable unsealed.
we want the invariant where all sealed sstables are split after split
was ACKed.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
When 'send_data_to_peer' throws and
closes the sink, the peer later reports its own error, masking the
original sender failure.
This commit preserves the original sender exception.
If the status-retrieval task throws its own error before sender task rethrows its exception,
we can still propagate the original exception later.
This patch enables integrity check in 'create_stream_sources()' by introducing a new
'sstable_data_stream_source_impl' class for handling the Data component of
SSTables. The new implementation uses 'sstable::data_stream()' with 'integrity_check::yes' instead
of the raw input_stream.
These additional checks require reading the digest and CRC components from
disk, which may introduce some I/O overhead. For uncompressed SSTables,
this involves loading and computing checksums and digest from the data.
For compressed SSTables - where checksums are already embedded - the
cost comes from reading, calculation and verifying the digest.
After scylladb/scylladb#22034, staging status of sstables streamed
via file streaming was ignored and view updates were never generated.
This patch fixes it and now staging sstables are registered to
`view_building_worker`. Then, the worker create view building tasks
for those sstables, so the view building coordinator can schedule them
once the tablet migration is finished.
Fixesscylladb/scylla-enterprise#4572
The files object is moved before the log when stream finishes. We've
logged the files when the stream starts. Skip it in the end of
streaming.
Fixes#25830Closesscylladb/scylladb#25835
When a replica operates in the critical disk utilization mode, all
incoming migrations are being rejected by rejecting an incoming
sstable file.
In the topology_coordinator, the rejected tablet is moved into the
cleanup_target state in order to revert migration. Otherwise, retry
happens and a cluster stays in the tablet_migration transition state
preventing any other topology changes to happen, e.g. scaling out.
Once the tablet migration is rejected, the load balancer will schedule
a new migration.
- Move the initialization of log_done inside the try block to catch any
exceptions it may throw.
- Relocate the failure warning log after sink.close() cleanup
to guarantee sink.close() is always called before logging errors.
Refs #25497Closesscylladb/scylladb#25591
No need to start a local generator.
Can just use the table's sstable generation generator
to make new sstables now that it's stateless and doesn't
depend on the highest generation found.
Note that tablet_stream_files_handler used uuid generations
unconditionally from inception
(4018dc7f0d).
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
The method does several excessive things, that can be relaxed
1. In order to transfer a table-id to another shard, finds the table on
source shard, gets schema and captures schema id on invoke_on()'s
lambda. It can just capture the original table-id
2. In order to get sstable parameters (format, version, etc.) generates
toc_filename(), then calls parse_path() to convert it into the
entry_descriptor. The descriptor can be read from sstable directly.
3. Logging "success" includes target shard into the message, but happens
on the source shard. The message can be just logged on target shard.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23197
Replace value-based exception catching with reference-based catching to address
GCC warnings about polymorphic type slicing:
```
warning: catching polymorphic type ‘class seastar::rpc::stream_closed’ by value [-Wcatch-value=]
```
When catching polymorphic exceptions by value, the C++ runtime copies the
thrown exception into a new instance of the specified type, slicing the
actual exception and potentially losing important information. This change
ensures all polymorphic exceptions are caught by reference to preserve the
complete exception state.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23064
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22467
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22034
