Migrate audit tests from test/cluster/dtest to test/cluster. Optimize their execution time through cluster reuse.
The audit test suite is heavy. There are more than 70 test executions. Environment preparation is a significant part of each test case execution time.
This PR:
1. Copies audit tests from test/cluster/dtest to test/cluster, refactoring and enabling them
2. Groups tests functions by non-live cluster configuration variations to enable cluster reuse between them
- Execution time reduced from 4m 29s to 2m 47s, which is ~38% execution time decrease
3. Removes the old audit tests from test/cluster/dtest
Includes two supporting changes:
- Allow specifying `AuthProvider` in `ManagerClient.get_cql_exclusive`
- Fix server log file handling for clean clusters
Refs [SCYLLADB-573](https://scylladb.atlassian.net/browse/SCYLLADB-573)
This PR is an improvement and does not require a backport.
[SCYLLADB-573]: https://scylladb.atlassian.net/browse/SCYLLADB-573?atlOrigin=eyJpIjoiNWRkNTljNzYxNjVmNDY3MDlhMDU5Y2ZhYzA5YTRkZjUiLCJwIjoiZ2l0aHViLWNvbS1KU1cifQClosesscylladb/scylladb#28650
* github.com:scylladb/scylladb:
test: cluster: fix log clear race condition in test_audit.py
test: pylib: shut down exclusive cql connections in ManagerClient
test: cluster: fix multinode audit entry comparison in test_audit.py
test: cluster: dtest: remove old audit tests
test: cluster: group migrated audit tests for cluster reuse
test: cluster: enable migrated audit tests and make them work
test: pylib: manager_client: specify AuthProvider in get_cql_exclusive
test: pylib: scylla cluster after_test log fix
test: audit: copy audit test from dtest
In test_index_requires_rf_rack_valid_keyspace, the create_table call
for a plain tablet-based table can fail with 'Unable to reach schema
agreement' after the server's 10s timeout is exceeded. This happens
when schema gossip propagation across the 4-node cluster takes longer
than expected after a sequence of rapid schema changes earlier in the
test.
Add a retry (up to 2 attempts) on schema agreement errors for this
specific create_table call rather than increasing the server-side
timeout.
Fixes: SCYLLADB-1135
Closesscylladb/scylladb#29132
`read_barrier(session2)` was supposed to ensure `node2` has caught up on schema
before a CL=ALL write. But `patient_cql_connection(node2)` creates a
cluster-aware driver session `(TokenAwarePolicy(DCAwareRoundRobinPolicy()))`
that can route the barrier CQL statement to any node — not necessarily `node2`.
If the barrier runs on `node1` or `node3` (which already have the new schema),
it's a no-op, and `node2` remains stale, thus the observed `WriteFailure`.
The fix is to switch to `patient_exclusive_cql_connection(node2)`,
which uses `WhiteListRoundRobinPolicy([node2_ip])` to pin all CQL to `node2`.
This is already the established pattern used by other tests in the same file.
Fixes: SCYLLADB-1139
No need to backport yet, appeared only on master.
Closesscylladb/scylladb#29151
The native Scylla nodetool reports ECONNREFUSED as 'Connection refused',
not as 'ConnectException' (which is the Java nodetool format). Add
'Connection refused' to the valid_errors list so that transient
connection failures during concurrent decommission/bootstrap topology
changes are properly tolerated.
Fixes SCYLLADB-1167
Closesscylladb/scylladb#29156
The test_restore_primary_replica_same_domain and test_restore_primary_replica_different_domain tests have very much in common. Previously both tests were also split each into two, so we have four tests, and now we have two that can also be squashed, the lines-of-code savings still worth it.
This is the continuation of #28569
Tests improvement, not backporting
Closesscylladb/scylladb#28994
* github.com:scylladb/scylladb:
test: Replace a bunch of ternary operators with an if-else block
test: Squash test_restore_primary_replica_same|different_domain tests
test: Use the same regexp in test_restore_primary_replica_different|same_domain-s
The do_test_backup_abort() fetched the node's workdir and resolved cf_dir
solely to construct a unique-ish backup prefix:
prefix = f'{cf_dir}/backup'
The comment already acknowledged this was only "unique(ish)" — relying
on the UUID-derived cf_dir name as a uniqueness source is roundabout.
unique_name() is already imported and used for exactly this purpose
elsewhere in the file.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#29030
The test in question uses several helpers from the backup sute, but it doesn't really need them -- the operations it want to perform can be performed with standard pylib methods. "While at it" also collect some dangling effectively unused local variables from this test (these were apparently left from backup tests this one was copied-and-reworked from)
Enhancing tests, not backporting
Closesscylladb/scylladb#29130
* github.com:scylladb/scylladb:
test/refresh: Simplify refresh invocation
test/refresh: Remove r_servers alias for servers
test/refresh: Replace check_mutation_replicas with a plain CQL SELECT
test/refresh: Inline keyspace/table/data setup in test_refresh_deletes_uploaded_sstables
test/refresh: Prepare indentation for new_test_keyspace in test_refresh_deletes_uploaded_sstables
test/refresh: Decouple test_refresh_deletes_uploaded_sstables from backup tests
test/refresh: Remove unused wait_for_cql_and_get_hosts import
When it deadlocks, groups stop merging and compaction group merge
backlog will run-away.
Also, graceful shutdown will be blocked on it.
Found by flaky unit test
test_merge_chooses_best_replica_with_odd_count, which timed-out in 1
in 100 runs.
Reason for deadlock:
When storage groups are merged, the main compaction group of the new
storage group takes a compaction lock, which is appended to
_compaction_reenablers_for_merging, and released when the merge
completion fiber is done with the whole batch.
If we accumulate more than 1 merge cycle for the fiber, deadlock
occurs. Lock order will be this
Initial state:
cg0: main
cg1: main
cg2: main
cg3: main
After 1st merge:
cg0': main [locked], merging_groups=[cg0.main, cg1.main]
cg1': main [locked], merging_groups=[cg2.main, cg3.main]
After 2nd merge:
cg0'': main [locked], merging_groups=[cg0'.main [locked], cg0.main, cg1.main, cg1'.main [locked], cg2.main, cg3.main]
merge completion fiber will try to stop cg0'.main, which will be
blocked on compaction lock. which is held by the reenabler in
_compaction_reenablers_for_merging, hence deadlock.
The fix is to wait for background merge to finish before we start the
next merge. It's achieved by holding old erm in the background merge,
and doing a topology barrier from the merge finalizing transition.
Background merge is supposed to be a relatively quick operation, it's
stopping compaction groups. So may wait for active requests. It
shouldn't prolong the barrier indefinitely.
Tablet tests which trigger merge need to be adjusted to call the
barrier, otherwise they will be vulnerable to the deadlock.
Fixes SCYLLADB-928
Backport to >= 2025.4 because it's the earliest vulnerable due to f9021777d8.
Closesscylladb/scylladb#29007
* github.com:scylladb/scylladb:
tablets: Fix deadlock in background storage group merge fiber
replica: table: Propagate old erm to storage group merge
test: boost: tablets_test: Save tablet metadata when ACKing split resize decision
storage_service: Extract local_topology_barrier()
The test has expectation w.r.t which write makes it to which nodes:
* inserts make it to all nodes
* delete makes it to all-1 (QUORUM) node
However, this was not expressed with CL, and the default CL=ONE allowed
for some nodes missing the writes and this violating the tests
expectations on what data is persent on which nodes. This resulted on
the test being flaky and failing on the data checks.
Use explicit CL for the ingestion to prevent this.
The improvements to the test introduced in
a8dd13731f was of great help in
investigating this: traces are now available and the check happens after
the data was dumped to logs.
Fixes: SCYLLADB-870
Fixes: SCYLLADB-812
Fixes: SCYLLADB-1102
Closesscylladb/scylladb#29128
Introduce an initial and experimental implementation of an alternative log-structured storage engine for key-value tables.
Main flows and components:
* The storage is composed of 32MB files, each file divided to segments of size 128k. We write to them sequentially records that contain a mutation and additional metadata. Records are written to a buffer first and then written to the active segment sequentially in 4k sized blocks.
* The primary index in memory maps keys to their location on disk. It is a B-tree per-table that is ordered by tokens, similar to a memtable.
* On reads we calculate the key and look it up in the primary index, then read the mutation from disk with a single disk IO.
* On writes we write the record to a buffer, wait for it to be written to disk, then update the index with the new location, and free the previous record.
* We track the used space in each segment. When overwriting a record, we increase the free space counter for the segment of the previous record that becomes dead. We store the segments in a histogram by usage.
* The compaction process takes segments with low utilization, reads them and writes the live records to new segments, and frees the old segments.
* Segments are initially "mixed" - we write to the active segment records from all tables and all tablets. The "separator" process rewrites records from mixed segments into new segments that are organized by compaction groups (tablets), and frees the mixed segments. Each write is written to the active segment and to a separator buffer of the compaction group, which is eventually flushed to a new segment in the compaction group.
Currently this mode is experimental and requires an experimental flag to be enabled.
Some things that are not supported yet are strong consistency, tablet migration, tablet split/merge, big mutations, tombstone gc, ttl.
to use, add to config:
```
enable_logstor: true
experimental_features:
- logstor
```
create a table:
```
CREATE TABLE ks.t(pk int PRIMARY KEY, a int, v text) WITH storage_engine = 'logstor';
```
INSERT, SELECT, DELETE work as expected
UPDATE not supported yet
no backport - new feature
Closesscylladb/scylladb#28706
* github.com:scylladb/scylladb:
logstor: trigger separator flush for buffers that hold old segments
docs/dev: add logstor documentation
logstor: recover segments into compaction groups
logstor: range read
logstor: change index to btree by token per table
logstor: move segments to replica::compaction_group
db: update dirty mem limits dynamically
logstor: track memory usage
logstor: logstor stats api
logstor: compaction buffer pool
logstor: separator: flush buffer when full
logstor: hold segment until index updates
logstor: truncate table
logstor: enable/disable compaction per table
logstor: separator buffer pool
test: logstor: add separator and compaction tests
logstor: segment and separator barrier
logstor: separator debt controller
logstor: compaction controller
logstor: recovery: recover mixed segments using separator
logstor: wait for pending reads in compaction
logstor: separator
logstor: compaction groups
logstor: cache files for read
logstor: recovery: initial
logstor: add segment generation
logstor: reserve segments for compaction
logstor: index: buckets
logstor: add buffer header
logstor: add group_id
logstor: record generation
logstor: generation utility
logstor: use RIPEMD-160 for index key
test: add test_logstor.py
api: add logstor compaction trigger endpoint
replica: add logstor to db
schema: add logstor cf property
logstor: initial commit
db: disable tablet balancing with logstor
db: add logstor experimental feature flag
Trie-based sstable indexes are supposed to be (hopefully) a better default than the old BIG indexes.
Make the new format a new default for new clusters by naming ms in the default scylla.yaml.
New functionality. No backport needed.
This PR is basically Michał's one https://github.com/scylladb/scylladb/pull/26377, Jakub's https://github.com/scylladb/scylladb/pull/27332 fixing `sstables_manager::get_highest_supported_format()` and one test fix.
Closesscylladb/scylladb#28960
* github.com:scylladb/scylladb:
db/config: announce ms format as highest supported
db/config: enable `ms` sstable format by default
cluster/dtest/bypass_cache_test: switch from highest_supported_sstable_format to chosen_sstable_format
api/system: add /system/chosen_sstable_version
test/cluster/dtest: reduce num_tokens to 16
take_snapshot return values were unused so drop them. do_refresh was a
thin wrapper around load_new_sstables that added no logic; inline it
directly into the gather expression.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The goal of test_refresh_deletes_uploaded_sstables is to verify that
sstables are removed from the upload directory after refresh. The replica
check was just a sanity guard; a simple SELECT of all keys is sufficient
and much lighter.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Replace create_dataset() with explicit keyspace creation via new_test_keyspace,
inline CREATE TABLE, and direct cql.run_async inserts — matching the pattern
used in do_test_streaming_scopes. This removes the last dependency on backup
helpers for dataset setup and makes the test self-contained.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Wrap the test body under if True: to pre-indent it, making the subsequent
patch that introduces new_test_keyspace a pure content change with no
whitespace noise.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace create_cluster() from object_store/test_backup.py with a plain
manager.servers_add(2) call. The test does not use object storage, so
there is no need to pull in the backup helper along with its config and
logging knobs.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
assert_entries_were_added:
- takes a "before" snapshot of the audit log
- yields to execute a statement
- takes an "after" snapshot of the audit log
- computes new rows by diffing "after" minus "before"
If an audit entry generated by prepare() arrives between the snapshot
and the diff, it inflates the new row count and the test fails with
assert 2 <= 1.
Fix by:
- Adding clear_audit_logs() at the end of prepare(), after all setup
- Waiting for the "completed re-reading configuration file" log message
after server_update_config
- Draining pending syslog lines before clearing the buffer
Refs SCYLLADB-573
assert_entries_were_added computes new audit rows by slicing the "after"
list at the length of the "before" list: rows_after[len(rows_before):].
This assumes new rows always appear at the tail of the combined sorted
list. In a multinode setup, each node generates its own event_time
timestamps. A new row from node A can sort before an old row from node
B, breaking the tail assumption. The assertion "new rows are not the
last rows in the audit table" then fires.
Fix this by splitting the before/after lists per node and computing the
new rows tail independently for each node. This guarantees that per node
ordering, which is monotonic, is respected, and the combined new rows
are sorted afterwards.
Refs SCYLLADB-573
Since audit tests have been migrated to test/cluster/test_audit.py,
old tests in test/cluster/dtest/audit_test.py have to be removed.
Refs SCYLLADB-573
This patch reorganizes the execution flow of the test functions.
They are grouped to enable cluster reuse between specific test
functions. One of the main contributors to the test execution time
is the cluster preparation. This patch significantly reduces the
total test execution time by having way less new cluster preparation
calls and more cluster reuse.
Performance increase on the developer machine is around 38%:
- before: 4m 29s
- after: 2m 47s
Fixes SCYLLADB-573
Make audit tests from test/cluster/dtest to test/cluster.
test/cluster environment has less overhead, and audit tests
are heavy, their execution taking lots of time. This patch
is part of an effort to improve audit test suite performance.
This patch refactors the tests so that they execute correctly,
as well as enables them. A follow up patch will remove the
audit tests in test/cluster/dtest.
All the tests are confirmed to be running after the change.
No dead code present.
Test test_audit_categories_invalid is not parametrized anymore.
It never used the parametrized helper class, so it just ran
the same logic three times. This is why there are now 74,
and not 76, test executions.
Refs SCYLLADB-573
This patch just copies the audit test suite from dtest and
disables it in the test config file. Later patches will
update the code and enable the test suite.
Refs SCYLLADB-573
After repair, the test does a major to compact all sstables into a
single one, so the results can be simply checked by a select from
mutation_fragments() query. Sometimes off-strategy happens parallel to
this major, so after the major there are still 2 sstables, resulting in
the test failing when checking that the query returns just a single row.
To fix, just use tablets for the test table, tablets don't use
off-strategy anymore.
Fixes: SCYLLADB-940
Closesscylladb/scylladb#29071
Previously the test test_interrupt_view_build_shard_registration stopped
the node ungracefully and used commitlog periodic mode to persist the
view build progress in a not very reliable way.
It can happen that due to timing issues, the view build progress is not
persisted, or some of it is persisted in a different ordering than
expected.
To make the test more reliable we change it to stop the node gracefully,
so the commitlog is persisted in a graceful and consistent way, without
using the periodic mode delay. We need to also change the injection for
the shutdown to not get stuck.
Fixes SCYLLADB-1005
Closesscylladb/scylladb#29008
Run keyspace compaction asynchronously in
`test_tombstone_gc_correctness_during_tablet_split` and only await it
after `split_sstable_rewrite` is disabled.
The problem is that `keyspace_compaction()` starts with a flush, and that
flush can take around five seconds. During that window the split
compaction is stopped before major compaction is retried. The stop aborts
the in-flight major compaction attempt, then the split proceeds far enough
to enter the `split_sstable_rewrite` injection point.
At that point the test used to wait synchronously for major compaction to
finish, but major compaction cannot finish yet: when it retries, it needs
the same semaphore that is still effectively tied up behind the blocked
split rewrite. So the test waits for major compaction, while the split
waits for the injection to be released, and the code that would release
that injection never runs.
Starting major compaction as a task breaks that cycle. The test can first
disable `split_sstable_rewrite`, let the split get out of the way, and
only then wait for major compaction to complete.
Fixes https://scylladb.atlassian.net/browse/SCYLLADB-827.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#29066
During decommission, we first mark a topology request as done, then shut
down a node and in the following steps we remove node from the topology.
Thus, finished request does not imply that a node is removed from
the topology.
Due to that, in node_ops_virtual_task::wait, while gathering children
from the whole cluster, we may hit the connection exception - because
a node is still in topology, even though it is down.
Modify the get_children method to ignore the exception and warn
about the failure instead.
Keep token_metadata_ptr in get_children to prevent topology from changing.
Fixes: https://scylladb.atlassian.net/browse/SCYLLADB-867
Needs backports to all versions
Closesscylladb/scylladb#29035
* github.com:scylladb/scylladb:
tasks: fix indentation
tasks: do not fail the wait request if rpc fails
tasks: pass token_metadata_ptr to task_manager::virtual_task::impl::get_children
A compaction group has a separator buffer that holds the mixed segments
alive until the separator buffer is flushed. A mixed segment can be
freed only after all separator buffers that hold writes from the segment
are flushed.
Typically a separator buffer is flushed when it becomes full. However
it's possible for example that one compaction groups is filled slower
than others and holds many segments.
To fix this we trigger a separator flush periodically for separator
buffers that hold old segments. We track the active segment sequence
number and for each separator buffer the oldest sequence number it
holds.
Fix the logstor recovery to work with compaction groups. When recovering
a segment find its token range and add it to the appropriate compaction
groups. if it doesn't fit in a single compaction group then write each
record to its compaction group's separator buffer.
Add a segment_set member to replica::compaction_group that manages the
logstor segments that belong to the compaction group, similarly to how
it manages sstables. Add also a separator buffer in each compaction
group.
When writing a mutation to a compaction group, the mutation is written
to the active segment and to the separator buffer of the compaction
group, and when the separator buffer is flushed the segment is added to
the compaction_group's segment set.
implement freeing all segments of a table for table truncate.
first do barrier to flush all active and mixed segments and put all the
table's data in compaction groups, then stop compaction for the table,
then free the table's segments and remove the live entries from the
index.
initial and basic recovery implementation.
* find all files, read their segments and populate the index with the
newest record for each key.
* find which segments are used and build the usage histogram
GRANT/REVOKE fails on the maintenance socket connections, because maintenance_auth_service uses allow_all_authorizer. allow_all_authorizer allows all operations, but not GRANT/REVOKE, because they make no sense in its context.
This has been observed during PGO run failure in operations from ./pgo/conf/auth.cql file.
This patch introduces maintenance_socket_authorizer that supports the capabilities of default_authorizer ('CassandraAuthorizer') without needing authorization.
Refs SCYLLADB-1070
This is an improvement, no need for backport.
Closesscylladb/scylladb#29080
* github.com:scylladb/scylladb:
test: use NetworkTopologyStrategy in maintenance socket tests
test: use cleanup fixture in maintenance socket auth tests
auth: add maintenance_socket_authorizer
In get_children we get the vector of alive nodes with get_nodes.
Yet, between this and sending rpc to those nodes there might be
a preemption. Currently, the liveness of a node is checked once
again before the rpcs (only with gossiper not in topology - unlike
get_nodes).
Modify get_children, so that it keeps a token_metadata_ptr,
preventing topology from changing between get_nodes and rpcs.
Remove test_get_children as it checked if the get_children method
won't fail if a node is down after get_nodes - which cannot happen
currently.
Since commit 509f2af8db, gate_closed_exception can be triggered for ongoing split during shutdown. The commit is correct, but it causes split failure on shutdown to log an error, which causes CI instability. Previously, aborted_exception would be triggered instead which is logged as warning. Let's do the same.
Fixes https://scylladb.atlassian.net/browse/SCYLLADB-951.
Fixes https://github.com/scylladb/scylladb/issues/24850.
Only 2026.1 is affected.
Closesscylladb/scylladb#29032
* github.com:scylladb/scylladb:
replica: Demote log level on split failure during shutdown
service: Demote log level on split failure during shutdown
A followup of the merge of two test cases that happened in the previous
patch. Both used `foo = N if domain == bar else M` to evaluate the
parameters for topology. Using if-else block makes it immediately obvious
which topology and scope apply for each domain value without having to
evaluate multiple inline conditionals.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The two tests differ only in the way they set up the topology for the
cluster and the post-restore checks against the resulting streams.
The merge happens with the help of a "scope_is_same" boolean parameter
and corresponding updates in the topology setup and post-checks.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The one in "different domain" test is simpler because the test performs
less checks. Next patch will merge both tests and making regexp-s look
identical makes the merge even smother.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
NetworkTopologyStrategy is the preferred choice. We should not
use SimpleStrategy anymore. This patch changes the topology strategy
for all the maintenance socket tests.
Refs SCYLLADB-1070
Add a cql_clusters pytest fixture that tracks CQL driver Cluster
objects and shuts them down automatically after test completion.
This replaces manual shutdown() calls at the end of each test.
Also consolidate shutdown() calls in retry helpers into finally
blocks for consistent cleanup.
Refs SCYLLADB-1070
GRANT/REVOKE fails on the maintenance socket connections,
because maintenance_auth_service uses allow_all_authorizer.
allow_all_authorizer allows all operations, but not GRANT/REVOKE,
because they make no sense in its context.
This has been observed during PGO run failure in operations from
./pgo/conf/auth.cql file.
This patch introduces maintenance_socket_authorizer that supports
the capabilities of default_authorizer ('CassandraAuthorizer')
without needing authorization.
Refs SCYLLADB-1070
This test was observed to fail in CI recently but there is not enough information in the logs to figure out what went wrong. This PR makes a few improvements to make the next investigation easier, should it be needed:
* storage-service: add table name to mutation write failure error messages.
* database: the `database_apply` error injection used to cause trouble, catching writes to bystander tables, making tests flaky. To eliminate this, it gained a filter to apply only to non-system keyspaces. Unfortunately, this still allows it to catch writes to the trace tables. While this should not fail the test, it reduces observability, as some traces disappear. Improve this error injection to only apply to selected table. Also merge it with the `database_apply_wait` error injection, to streamline the code a bit.
* test/test_data_resurrection_in_memtable.py: dump data from the datable, before the checks for expected data, so if checks fail, the data in the table is known.
Refs: SCYLLADB-812
Refs: SCYLLADB-870
Fixes: SCYLLADB-1050 (by restricting `database_apply` error injection, so it doesn't affect writes to system traces)
Backport: test related improvement, no backport
Closesscylladb/scylladb#28899
* github.com:scylladb/scylladb:
test/cluster/test_data_resurrection_in_memtable.py: dump rows before check
replica/database: consolidate the two database_apply error injections
service/storage_proxy: add name of table to error message for write errors
Fixes: SCYLLADB-244
Disables snapshot control such that any active ops finish/fail
before proceeding with decommission.
Note: snapshot control provided as argument, not member ref
due to storage_service being used from both main and cql_test_env.
(The latter has no snapshot_ctl to provide).
Could do the snapshot lockout on API level, but want to do
pre-checks before this.
Note: this just disables backup/snapshot fully. Could re-enable
after decommission, but this seems somewhat pointless.
v2:
* Add log message to snapshot shutdown
* Make test use log waiting instead of timeouts
Closesscylladb/scylladb#28980
