During forwarding of CQL EXECUTE requests, the target node may
not have the prepared statement in its cache. If we do have this
statement as a coordinator, instead of returning PREPARED NOT FOUND
to the client, we want to prepare the statement ourselves on target
node.
For that, we add a new FORWARD_CQL_PREPARE RPC. We use the new RPC
after gettting the prepared_not_found status during forwarding. When
we try to forward a request, we always have the query string (we
decide whether to forward based on this query), so we can always use
the new RPC when getting the prepared_not_found status.
After receiving the response, we try forwarding the EXECUTE request
again.
Add the infrastructure for forwarding CQL requests to other nodes.
When a process() call results in a node bounce (as opposed to a shard
bounce), the coordinator serializes the request and sends it via the
FORWARD_CQL_EXECUTE RPC verb to the target node.
In this patch we omit several features that allow handling more
scenarios that can happen when trying to forward a CQL request,
but the RPC request and response are already prepared for them.
They will be handled in the following commits.
This series adds a global read barrier to raft_group0_client, ensuring that Raft group0 mutations are applied on all live nodes before returning to the caller.
Currently, after a group0_batch::commit, the mutations are only guaranteed to be applied on the leader. Other nodes may still be catching up, leading to stale reads. This patch introduces a broadcast read barrier mechanism. Calling send_group0_read_barrier_to_live_members after committing will cause the coordinator to send a read barrier RPC to all live nodes (discovered via gossiper) and waits for them to complete. This is best effort attempt to get cluster-wide visibility of the committed state before the response is returned to the user.
Auth and service levels write paths are switched to use this new mechanism.
Fixes https://scylladb.atlassian.net/browse/SCYLLADB-650
Backport: no, new feature
Closesscylladb/scylladb#28731
* https://github.com/scylladb/scylladb:
test: add tests for global group0_batch barrier feature
qos: switch service levels write paths to use global group0_batch barrier
auth: switch write paths to use global group0_batch barrier
raft: add function to broadcast read barrier request
raft: add gossiper dependency to raft_group0_client
raft: add read barrier RPC
The default error message of `closed_error` is "connection is closed".
It lacks the host ID and the IP address of the connected node, which
makes debugging harder. Also, it can be more specific when
`closed_error` is thrown due to the local node shutting down.
Fixes#16923Closesscylladb/scylladb#27699
When direct failure detector was introduces the idea was that it will
run on the same connection raft group0 verbs are running, but in
60f1053087 raft verbs were moved to run on the gossiper connection
while DIRECT_FD_PING was left where it was. This patch move it to
gossiper connection as well and fix the pinger code to run in gossiper
scheduling group.
This reverts commit 11f045bb7c.
The rpc was added together with colocated tablets in 2025.4 to support a
"shared repair" operation of a group of colocated tablets that repairs
all of them and allows also for special behavior as opposed to repairing
a single specific tablet.
It is not used anymore because we decided to not repair all colocated
tablets in a single shared operation, but to repair only the base table,
and in a later release support repairing colocated tables individually.
We can remove the rpc in 2025.4 because it is introduced in the same
version.
Currently if a banned node tries to connect to a cluster it fails to
create connections, but has no idea why, so from inside the node it
looks like it has communication problems. This patch adds new rpc
NOTIFY_BANNED which is sent back to the node when its connection is
dropped. On receiving the rpc the node isolates itself and print an
informative message about why it did so.
Closesscylladb/scylladb#26943
Add precompiled header support to CMakeLists.txt and configure.py -
it improves compilation time by approximately 10%.
New header `stdafx.hh` is added, don't include it manually -
the compiler will include it for you. The header contains includes from
external libraries used by Scylla - seastar, standard library,
linux headers and zlib.
The feature is enabled by default, use CMake option `Scylla_USE_PRECOMPILED_HEADER`
or configure.py --disable-precompiled-header to disable.
The feature should be disabled, when trying to check headers - otherwise
you might get false negatives on missing includes from seastar / abseil and so on.
Note: following configuration needs to be added to ccache.conf:
sloppiness = pch_defines,time_macros,include_file_mtime,include_file_ctime
Closesscylladb/scylladb#26617
The feature in question is about the way streaming sink-and-source
operate. Since sink-and-source itself are obtained from messaging
service, the feature is better be fetched from it too.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The directory utils/ is supposed to contain general-purpose utility
classes and functions, which are either already used across the project,
or are designed to be used across the project.
This patch moves 8 files out of utils/:
utils/advanced_rpc_compressor.hh
utils/advanced_rpc_compressor.cc
utils/advanced_rpc_compressor_protocol.hh
utils/stream_compressor.hh
utils/stream_compressor.cc
utils/dict_trainer.cc
utils/dict_trainer.hh
utils/shared_dict.hh
These 8 files together implement the compression feature of RPC.
None of them are used by any other Scylla component (e.g., sstables have
a different compression), or are ready to be used by another component,
so this patch moves all of them into message/, where RPC is implemented.
Theoretically, we may want in the future to use this cluster of classes
for some other component, but even then, we shouldn't just have these
files individually in utils/ - these are not useful stand-alone
utilities. One cannot use "shared_dict.hh" assuming it is some sort of
general-purpose shared hash table or something - it is completely
specific to compression and zstd, and specifically to its use in those
other classes.
Beyond moving these 8 files, this patch also contains changes to:
1. Fix includes to the 5 moved header files (.hh).
2. Fix configure.py, utils/CMakeLists.txt and message/CMakeLists.txt
for the three moved source files (.cc).
3. In the moved files, change from the "utils::" namespace, to the
"netw::" namespace used by RPC. Also needed to change a bunch
of callers for the new namespace. Also, had to add "utils::"
explicitly in several places which previously assumed the
current namespace is "utils::".
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#25149
The latter is recommended in seastar, and the former was left as
compatibility alias. Latest seastar explicitly marks it as deprecated so
once the submodule is updated, compilation logs will explode.
Most of the patch is generated with
for f in $(git grep -l '\<distributed<[A-Za-z0-9:_]*>') ; do sed -e 's/\<distributed<\([A-Za-z0-9:_]*\)>/sharded<\1>/g' -i $f; done
for f in $(git grep -l distributed.hh); do sed -e 's/distributed.hh/sharded.hh/' -i $f ; done
and a small manual change in test/perf/perf.hh
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26136
As requested in #22099, moved the files and fixed other includes and build system.
Moved files:
- cache_temperature.hh
- cell_locking.hh
Fixes: #22099Closesscylladb/scylladb#25079
As requested in #22120, moved the files and fixed other includes and build system.
Moved files:
- query.cc
- query-request.hh
- query-result.hh
- query-result-reader.hh
- query-result-set.cc
- query-result-set.hh
- query-result-writer.hh
- query_id.hh
- query_result_merger.hh
Fixes: #22120
This is a cleanup, no need to backport
Closesscylladb/scylladb#25105
This patch introduces `view_building_coordinator`, a single entity within whole cluster responsible for building tablet-based views.
The view building coordinator takes slightly different approach than the existing node-local view builder. The whole process is split into smaller view building tasks, one per each tablet replica of the base table.
The coordinator builds one base table at a time and it can choose another when all views of currently processing base table are built.
The tasks are started by setting `STARTED` state and they are executed by node-local view building worker. The tasks are scheduled in a way, that each shard processes only one tablet at a time (multiple tasks can be started for a shard on a node because a table can have multiple views but then all tasks have the same base table and tablet (last_token)). Once the coordinator starts the tasks, it sends `work_on_view_building_tasks` RPC to start the tasks and receive their results.
This RPC is resilient to RPC failure or raft leader change, meaning if one RPC call started a batch of tasks but then failed (for instance the raft leader was changed and caller aborted waiting for the response), next RPC call will attach itself to the already started batch.
The coordinator plugs into handling tablet operations (migration/resize/RF change) and adjusts its tasks accordingly. At the start of each tablet operation, the coordinator aborts necessary view building tasks to prevent https://github.com/scylladb/scylladb/issues/21564. Then, new adjusted tasks are created at the end of the operation.
If the operation fails at any moment, aborted tasks are rollback.
The view building coordinator can also handle staging sstables using process_staging view building tasks. We do this because we don't want to start generating view updates from a staging sstable prematurely, before the writes are directed to the new replica (https://github.com/scylladb/scylladb/issues/19149).
For detailed description check: `docs/dev/view-building-coordinator.md`
Fixes https://github.com/scylladb/scylladb/issues/22288
Fixes https://github.com/scylladb/scylladb/issues/19149
Fixes https://github.com/scylladb/scylladb/issues/21564
Fixes https://github.com/scylladb/scylladb/issues/17603
Fixes https://github.com/scylladb/scylladb/issues/22586
Fixes https://github.com/scylladb/scylladb/issues/18826
Fixes https://github.com/scylladb/scylladb/issues/23930
---
This PR is reimplementation of https://github.com/scylladb/scylladb/pull/21942Closesscylladb/scylladb#23760
* github.com:scylladb/scylladb:
test/cluster: add view build status tests
test/cluster: add view building coordinator tests
utils/error_injection: allow to abort `injection_handler::wait_for_message()`
test: adjust existing tests
utils/error_injection: add injection with `sleep_abortable()`
db/view/view_builder: ignore `no_such_keyspace` exception
docs/dev: add view building coordinator documentation
db/view/view_building_worker: work on `process_staging` tasks
db/view/view_building_worker: register staging sstable to view building coordinator when needed
db/view/view_building_worker: discover staging sstables
db/view/view_building_worker: add method to register staging sstable
db/view/view_update_generator: add method to process staging sstables instantly
db/view/view_update_generator: extract generating updates from staging sstables to a method
db/view/view_update_generator: ignore tablet-based sstables
db/view/view_building_coordinator: update view build status on node join/left
db/view/view_building_coordinator: handle tablet operations
db/view: add view building task mutation builder
service/topology_coordinator: run view building coordinator
db/view: introduce `view_building_coordinator`
db/view/view_building_worker: update built views locally
db/view: introduce `view_building_worker`
db/view: extract common view building functionalities
db/view: prepare to create abstract `view_consumer`
message/messaging_service: add `work_on_view_building_tasks` RPC
service/topology_coordinator: make `term_changed_error` public
db/schema_tables: create/cleanup tasks when an index is created/dropped
service/migration_manager: cleanup view building state on drop keyspace
service/migration_manager: cleanup view building state on drop view
service/migration_manager: create view building tasks on create view
test/boost: enable proxy remote in some tests
service/migration_manager: pass `storage_proxy` to `prepare_keyspace_drop_announcement()`
service/migration_manager: coroutinize `prepare_new_view_announcement()`
service/storage_proxy: expose references to `system_keyspace` and `view_building_state_machine`
service: reload `view_building_state_machine` on group0 apply()
service/vb_coordinator: add currently processing base
db/system_keyspace: move `get_scylla_local_mutation()` up
db/system_keyspace: add `view_building_tasks` table
db/view: add view_building_state and views_state
db/system_keyspace: add method to get view build status map
db/view: extract `system.view_build_status_v2` cql statements to system_keyspace
db/system_keyspace: move `internal_system_query_state()` function earlier
db/view: ignore tablet-based views in `view_builder`
gms/feature_service: add VIEW_BUILDING_COORDINATOR feature
Add precompiled header support to CMakeLists.txt and configure.py -
it improves compilation time by approximately 10%.
New header `stdafx.hh` is added, don't include it manually -
the compiler will include it for you. The header contains includes from
external libraries used by Scylla - seastar, standard library,
linux headers and zlib.
The feature is enabled by default, use CMake option `Scylla_USE_PRECOMPILED_HEADER`
or configure.py --disable-precompiled-header to disable.
The feature should be disabled, when trying to check headers - otherwise
you might get false negatives on missing includes from seastar / abseil and so on.
Note: following configuration needs to be added to ccache.conf:
sloppiness = pch_defines,time_macros
Closes#25182
The RPC will be used by view building coordinator to attach to and wait
for tasks performed by view building worker (introduced in later
commit).
The RPC gets vector of tasks' ids and returns vector of
`view_task_result`s.
i-th task result reffers to i-th task id.
The central idea of incremental repair is to allow repair participants
to select and repair only a portion of the dataset to speed up the
repair process. All repair participants must utilize an identical
selection method to repair and synchronize the same selected dataset.
There are two primary selection methods: time-based and file-based. The
time-based method selects data within a specified time frame. It is
versatile but it is less efficient because it requires reading all of
the dataset and omitting data beyond the time frame. The file-based
method selects data from unrepaired SSTables and is more efficient
because it allows the entire SSTable to be omitted. This document patch
implements the file-based selection method.
Incremental repair will only be supported for tablet tables; it will not
be supported for vnode tables. On one hand, the legacy vnode is less
important to support. On the other hand, the incremental repair for
vnode is much harder to implement. With vnodes, a SSTalbe could contain
data for multiple vnode ranges. When a given vnode range is repaired,
only a portion of the SSTable is repaired. This complicates the
manipulation of SSTables significantly during both repair and
compaction. With tablets, an entire tablet is repaired so that a
sstable is either fully repaired or not repaired which is a huge
simplification.
This patch uses the repaired_at from sstables::statistics component to
mark a sstable as repaired. It uses a virtual clock as the repair
timestamp, i.e., using a monotonically increasing number for the
repaired_at field of a SSTable and sstables_repaired_at column in
system.tablets table. Notice that when a sstable is not repaired, the
repaired_at field will be set to the default value 0 by default. The
being_repaired in memory field of a SSTable is used to explicitly mark
that a SSTable is being selected. The following variables are used for
incremental repair:
The repaired_at on disk field of a SSTable is used.
- A 64-bit number increases sequentially
The sstables_repaired_at is added to the system.tablets table.
- repaired_at <= sstables_repaired_at means the sstable is repaired
The being_repaired in memory field of a SSTable is added.
- A repair UUID tells which sstable has participated in the repair
Initial test results:
1) Medium dataset results
Node amount: 3
Instance type: i4i.2xlarge
Disk usage per node: ~500GB
Cluster pre-populated with ~500GB of data before starting repairs job.
Results for Repair Timings:
The regular repair run took 210 mins.
Incremental repair 1st run took 183 mins, 2nd and 3rd runs took around 48s
The speedup is: 183 mins / 48s = 228X
2) Small dataset results
Node amount: 3
Instance type: i4i.2xlarge
Disk usage per node: ~167GB
Cluster pre-populated with ~167GB of data before starting the repairs job.
Regular repair 1st run took 110s, 2nd and 3rd runs took 110s.
Incremental repair 1st run took 110 seconds, 2nd and 3rd run took 1.5 seconds.
The speedup is: 110s / 1.5s = 73X
3) Large dataset results
Node amount: 6
Instance type: i4i.2xlarge, 3 racks
50% of base load, 50% read/write
Dataset == Sum of data on each node
Dataset Non-incremental repair (minutes)
1.3 TiB 31:07
3.5 TiB 25:10
5.0 TiB 19:03
6.3 TiB 31:42
Dataset Incremental repair (minutes)
1.3 TiB 24:32
3.0 TiB 13:06
4.0 TiB 5:23
4.8 TiB 7:14
5.6 TiB 3:58
6.3 TiB 7:33
7.0 TiB 6:55
Fixes#22472
As requested in #22114, moved the files and fixed other includes and build system.
Moved files:
- interval.hh
- Map_difference.hh
Fixes: #22114
This is a cleanup, no need to backport
Closesscylladb/scylladb#25095
add a new RPC repair_colocated_tablets which is similar to the RPC
tablet_repair, but instead of repairing a single tablet it takes a set
of co-located tablets, repairs them and returns a shared repair_time
result.
This is useful because the way co-located tablets are represented
doesn't allow to repair tablets independently but only as a group
operation, and the repair_time which is stored in the tablet map is
shared with the entire co-location group.
But when repairing a group of co-located tablets we may require a
different behavior, especially considering that co-located tablets are
derived tablets of a special type. For example, we may want to skip
running repair on CDC tablets when repairing the base table.
The new RPC and the storage service function repair_colocated_tablets
allow the flexibility to implement different strategies when repairing
co-located groups.
Currently the implementation is simply to repair each tablet and return
the minimum repair_time as the shared repair time.
token_range_vector is a linear vector containing intervals
of tokens. It can grow quite large in certain places
and so cause stalls.
Convert it to utils::chunked_vector, which prevents allocation
stalls.
It is not used in any hot path, as it usually describes
vnodes or similar things.
Fixes#3335.
And define `send_message_timeout_cancellable` in rpc_protocol_impl.hh
using the newly introduced rpc_handler entry point
in seastar that accepts both timeout and cancellable params.
Note that the interface to the user still uses abort_source
while internally the funtion allocates a seastar::rpc::cancellable
object. It is possible to provide an interface that will accept
a rpc::cancellable& from the caller, but the existing messaging api
uses abort_source. Changing it may be considered in the future.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
In order for RAFT operations to use the gossip system semaphore, moving RAFT
verbs to the gossip group in `do_get_rpc_client_idx`, messaging_service.
Fixes scylladb/scylladb21637
Add two verbs needed to implement dictionary training for SSTable
compression.
SAMPLE_SSTABLES returns a list of randomly-selected chunks of Data files
with a given cardinality and using a given chunk size,
for the given table.
ESTIMATE_SSTABLE_VOLUME returns the total uncompressed size of all Data
files the given table.
Extend the `system.dicts` helper for querying and modifying
`system.dicts` with an ability to use names other than "general".
We will use that in later commits to publish dictionaries for SSTable compression.
During messaging_service object creation remove_rpc_client function may
be called if prefer_local snitch setting is true. The caller does not
provide host id, so _address_to_host_id_mapper is called to obtain it,
but at this point the function is not initialized yet.
The patch fixes the code to not call the function if not initialized.
This is not the problem since during messaging_service creation there
is no connection to drop.
Fixes: #23353
Message-ID: <Z-J2KbBK8NoFNYZZ@scylladb.com>
"
This is series starts conversion of the gossiper to use host ids to
index nodes. It does not touch the main map yet, but converts a lot of
internal code to host id. There are also some unrelated cleanups that
were done while working on the series. On of which is dropping code
related to old shadow round. We replaced shadow round with explicit
GOSSIP_GET_ENDPOINT_STATES verb in cd7d64f588
which is in scylla-4.3.0, so there should be no compatibility problem.
We already dropped a lot of old shadow round code in previous patches
anyway.
I tested manually that old and new node can co-exist in the same
cluster,
"
* 'gleb/gossiper-host-id-v2' of github.com:scylladb/scylla-dev: (33 commits)
gossiper: drop unneeded code
gossiper: move _expire_time_endpoint_map to host_id
gossiper: move _just_removed_endpoints to host id
gossiper: drop unused get_msg_addr function
messaging_service: change connection dropping notification to pass host id only
messaging_service: pass host id to remove_rpc_client in down notification
treewide: pass host id to endpoint_lifecycle_subscriber
treewide: drop endpoint life cycle subscribers that do nothing
load_meter: move to host id
treewide: use host id directly in endpoint state change subscribers
treewide: pass host id to endpoint state change subscribers
gossiper: drop deprecated unsafe_assassinate_endpoint operation
storage_service: drop unused code in handle_state_removed
treewide: drop endpoint state change subscribers that do nothing
gossiper: drop ip address from handle_echo_msg and simplify code since host_id is now mandatory
gossiper: start using host ids to send messages earlier
messaging_service: add temporary address map entry on incoming connection
topology_coordinator: notify about IP change from sync_raft_topology_nodes as well
treewide: move everyone to use host id based gossiper::is_alive and drop ip based one
storage_proxy: drop unused template
...
Do not iterate over all client indexed by hos id to search for those
with given IP. Look up by host id directly since now we know it in down
notification. In cases host id is not known look it up by ip.
We want to move to use host ids as soon as possible. Currently it is
possible only after the full gossiper exchange (because only at this
point gossiper state is added and with it address map entry). To make it
possible to move to host ids earlier this patch adds address map entries
on incoming communication during CLIENT_ID verb processing. The patch
also adds generation to CLIENT_ID to use it when address map is updated.
It is done so that older gossiper entries can be overwritten with newer
mapping in case of IP change.
Drop it from files that obviously don't need it. Also kill some forward
declarations while at it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#22979
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22467
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
New feature. No backport is needed.
Closesscylladb/scylladb#21896
* github.com:scylladb/scylladb:
repair: Stop using rpc to update repair time for repairs scheduled by scheduler
repair: Wire repair_time in system.tablets for tombstone gc
test: Disable flush_cache_time for two tablet repair tests
test: Introduce guarantee_repair_time_next_second helper
repair: Return repair time for repair_service::repair_tablet
service: Add tablet_operation.hh
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22034
Now that all topology related code uses host ids there is not point to
maintain ip to id (and back) mappings in the token metadata. After the
patch the mapping will be maintained in the gossiper only. The rest of
the system will use host ids and in rare cases where translation is
needed (mostly for UX compatibility reasons) the translation will be
done using gossiper.
Fixes: scylladb/scylla#21777
* 'gleb/drop-ip-from-tm-v3' of github.com:scylladb/scylla-dev: (57 commits)
hint manager: do not translate ip to id in case hint manager is stopped already
locator: token_metadata: drop update_host_id() function that does nothing now
locator: topology: drop indexing by ips
repair: drop unneeded code
storage_service: use host_id to look for a node in on_alive handler
storage_proxy: translate ips to ids in forward array using gossiper
locator: topology: remove unused functions
storage_service: check for outdated ip in on_change notification in the peers table
storage_proxy: translate id to ip using address map in tablets's describe_ring code instead of taking one from the topology
topology coordinator: change connection dropping code to work on host ids
cql3: report host id instead of ip in error during SELECT FROM MUTATION_FRAGMENTS query
locator: drop unused function from tablet_effective_replication_map
api: view_build_statuses: do not use IP from the topology, but translate id to ip using address map instead
locator: token_metadata: remove unused ip based functions
locator: network_topology_strategy: use host_id based function to check number of endpoints in dcs
gossiper: drop get_unreachable_token_owners functions
storage_service: use gossiper to map ip to id in node_ops operations
storage_service: fix indentation after the last patch
storage_service: drop loops from node ops replace_prepare handling since there can be only one replacing node
token_metadata: drop no longer used functions
...
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
We want to drop ips from token_metadata so move to use host id based
counterparts. Messaging service gets a function that maps from ips to id
when is starts listening.
