Rather than lowres_clock, as since
32b7cab917,
loading_cache_for_test uses manual_clock for timing
and relying on lowres_clock to time the test might
run out of memory on fast test machines.
Fixes#23497
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#23498
Relying on a real-time clock like lowres_clock
can be flaky (in particular in debug mode).
Use manual_clock instead to harden the test against
timing issues.
Fixes#20322
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Rather than a global function, accessing a thread-local `load_count`.
The thread-local load_count cannot be used when multiple test
cases run in parallel.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
This test isn't about reading values from file,
but rather it's about the loading_cache.
Reading from the file can sometimes take longer than
the expected refresh times, causing flakiness (see #20322).
Rather than reading a string from a real file, just
sleep a random, short time, and co_return the string.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
rather then macros.
This is a first cleanup step before adding a sleep function
parameter to support also manual_clock.
Also, add a call to BOOST_REQUIRE_EQUAL/BOOST_CHECK_EQUAL,
respectively, to make an error more visible in the test log
since those entry points print the offending values
when not equal.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
To reduce test executable size and speed up compilation time, compile unit
tests into a single executable.
Here is a file size comparison of the unit test executable:
- Before applying the patch
$ du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
11G build/release/test/boost/
29G build/debug/test/boost/
- After applying the patch
du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
5.5G build/release/test/boost/
19G build/debug/test/boost/
It reduces executable sizes 5.5GB on release, and 10GB on debug.
Closes#9155Closesscylladb/scylladb#21443
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Fixes some typos as found by codespell run on the code.
In this commit, I was hoping to fix only comments, not user-visible alerts, output, etc.
Follow-up commits will take care of them.
Refs: https://github.com/scylladb/scylladb/issues/16255
Signed-off-by: Yaniv Kaul <yaniv.kaul@scylladb.com>
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
We capture `key` by reference, but it is in a another continuation.
Capture it by value, and avoid the default capture specification.
Found by clang 15 + asan + aarch64.
Closes#11884
Validate that the size of the cache is zero after calling the
reset method and that the config is being updated correctly
after calling update_config.
Signed-off-by: Igor Ribeiro Barbosa Duarte <igor.duarte@scylladb.com>
This patch renames the permissions_cache_config struct to loading_cache_config
and moves it to utils/loading_cache.hh. This will make it easier to handle
config updates to the authorization caches on the next patches
Signed-off-by: Igor Ribeiro Barbosa Duarte <igor.duarte@scylladb.com>
Add a new test that sets up a CQL environment with a very small prepared
statements cache. The test reproduces a scenario described in #10440,
where a privileged section of prepared statement cache gets large
and that could possibly starve the unprivileged section, making it
impossible to execute BATCH statements. Additionally, at the end of the
test, prepared statements/"simulated batches" with prepared statements
are executed a random number of times, stressing the cache.
To create a CQL environment with small prepared cache, cql_test_config
is extended to allow setting custom memory_config value.
This patch enforces a minimum size of unprivileged section when
performing shrink() operation.
When the cache is shrank, we still drop entries first from unprivileged
section (as before this commit), however if this section is already small
(smaller than max_size / 2), we will drop entries from the privileged
section.
For example if the cache could store at most 50 entries and there are 49
entries in privileged section, after adding 5 entries (that would go to
unprivileged section) 4 of them would get evicted and only the 5th one
would stay. This caused problems with BATCH statements where all
prepared statements in the batch have to stay in cache at the same time
for the batch to correctly execute.
New tests are added to check this behavior and bookkeeping of section
sizes.
Fixes#10440.
There are two issues with current implementation of remove/remove_if:
1) If it happens concurrently with get_ptr(), the latter may still
populate the cache using value obtained from before remove() was
called. remove() is used to invalidate caches, e.g. the prepared
statements cache, and the expected semantic is that values
calculated from before remove() should not be present in the cache
after invalidation.
2) As long as there is any active pointer to the cached value
(obtained by get_ptr()), the old value from before remove() will be
still accessible and returned by get_ptr(). This can make remove()
have no effect indefinitely if there is persistent use of the cache.
One of the user-perceived effects of this bug is that some prepared
statements may not get invalidated after a schema change and still use
the old schema (until next invalidation). If the schema change was
modifying UDT, this can cause statement execution failures. CQL
coordinator will try to interpret bound values using old set of
fields. If the driver uses the new schema, the coordinaotr will fail
to process the value with the following exception:
User Defined Type value contained too many fields (expected 5, got 6)
The patch fixes the problem by making remove()/remove_if() erase old
entries from _loading_values immediately.
The predicate-based remove_if() variant has to also invalidate values
which are concurrently loading to be safe. The predicate cannot be
avaluated on values which are not ready. This may invalidate some
values unnecessarily, but I think it's fine.
Fixes#10117
Message-Id: <20220309135902.261734-1-tgrabiec@scylladb.com>
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
This patch implements a simple variation of LFRU eviction policy:
* We define 2 dynamic cache sections which total size should not exceed the maximum cache size.
* New cache entry is always added to the "unprivileged" section.
* After a cache entry is read more than SectionHitThreshold times it moves to the second cache section.
* Both sections' entries obey expiration and reload rules in the same way as before this patch.
* When cache entries need to be evicted due to a size restriction "unprivileged" section's
least recently used entries are evicted first.
Note:
With a 2 sections cache it's not enough for a new entry to have the latest timestamp
in order not be evicted right after insertion: e.g. if all all other entries
are from the privileged section.
And obviously we want to allow new cache entries to be added to a cache.
Therefore we can no longer first add a new entry and then shrink the cache.
Switching the order of these two operations resolves the culprit.
Fixes#8674
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
loading_shared_values/loading_cache'es iterators interface is dangerous/fragile because
iterator doesn't "lock" the entry it points to and if there is a
preemption point between aquiring non-end() iterator and its
dereferencing the corresponding cache entry may had already got evicted (for
whatever reason, e.g. cache size constraints or expiration) and then
dereferencing may end up in a use-after-free and we don't have any
protection against it in the value_extractor_fn today.
And this is in addition to #8920.
So, instead of trying to fix the iterator interface this patch kills two
birds in a single shot: we are ditching the iterators interface
completely and return value_ptr from find(...) instead - the same one we
are returning from loading_cache::get_ptr(...) asyncronous APIs.
A similar rework is done to a loading_shared_values loading_cache is
based on: we drop iterators interface and return
loading_shared_values::entry_ptr from find(...) instead.
loading_cache::value_ptr already takes care of "lock"ing the returned value so that it
would relain readable even if it's evicted from the cache by the time
one tries to read it. And of course it also takes care of updating the
last read time stamp and moving the corresponding item to the top of the
MRU list.
Fixes#8920
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
Message-Id: <20210817222404.3097708-1-vladz@scylladb.com>
Use the thread_local seastar::testing::local_random_engine
in all seastar tests so they can be reproduced using
the --random-seed option.
Test: unit(dev)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20210112103713.578301-2-bhalevy@scylladb.com>
rand_int() re-creates a random device each time it is called.
Change it to use a static random_device, and get random numbers
from a random_engine instead of from the device directly.
This avoids exhausting entropy, see [1] for details.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94087
This removes the need to include reactor.hh, a source of compile
time bloat.
In some places, the call is qualified with seastar:: in order
to resolve ambiguities with a local name.
Includes are adjusted to make everything compile. We end up
having 14 translation units including reactor.hh, primarily for
deprecated things like reactor::at_exit().
Ref #1
1. Move tests to test (using singular seems to be a convention
in the rest of the code base)
2. Move boost tests to test/boost, other
(non-boost) unit tests to test/unit, tests which are
expected to be run manually to test/manual.
Update configure.py and test.py with new paths to tests.
