these unused includes were identifier by clang-include-cleaner. after
auditing these source files, all of the reports have been confirmed.
please note, because quite a few source files relied on
`utils/to_string.hh` to pull in the specialization of
`fmt::formatter<std::optional<T>>`, after removing
`#include <fmt/std.h>` from `utils/to_string.hh`, we have to
include `fmt/std.h` directly.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Our "sstring_view" is an historic alias for the standard std::string_view.
The patch changes the last remaining random uses of this old alias across
our source directory to the standard type name.
After this patch, there are no more uses of the "sstring_view" alias.
It will be removed in the following patch.
Refs #4062.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
The later includes the former and in addition to `seastar::format()`,
`print.hh` also provides helpers like `seastar::fprint()` and
`seastar::print()`, which are deprecated and not used by scylladb.
Previously, we include `seastar/core/print.hh` for using
`seastar::format()`. and in seastar 5b04939e, we extracted
`seastar::format()` into `seastar/core/format.hh`. this allows us
to include a much smaller header.
In this change, we just include `seastar/core/format.hh` in place of
`seastar/core/print.hh`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21574
assert() is traditionally disabled in release builds, but not in
scylladb. This hasn't caused problems so far, but the latest abseil
release includes a commit [1] that causes a 1000 insn/op regression when
NDEBUG is not defined.
Clearly, we must move towards a build system where NDEBUG is defined in
release builds. But we can't just define it blindly without vetting
all the assert() calls, as some were written with the expectation that
they are enabled in release mode.
To solve the conundrum, change all assert() calls to a new SCYLLA_ASSERT()
macro in utils/assert.hh. This macro is always defined and is not conditional
on NDEBUG, so we can later (after vetting Seastar) enable NDEBUG in release
mode.
[1] 66ef711d68Closesscylladb/scylladb#20006
in in {fmt} before v10, it provides the specialization of `fmt::formatter<..>`
for `std::string_view` as well as the specialization of `fmt::formatter<..>`
for `fmt::string_view` which is an implementation builtin in {fmt} for
compatibility of pre-C++17. and this type is used even if the code is
compiled with C++ stadandard greater or equal to C++17. also, before v10,
the `fmt::formatter<std::string_view>::format()` is defined so it accepts
`std::string_view`. after v10, `fmt::formatter<std::string_view>` still
exists, but it is now defined using `format_as()` machinery, so it's
`format()` method does not actually accept `std::string_view`, it
accepts `fmt::string_view`, as the former can be converted to
`fmt::string_view`.
this is why we can inherit from `fmt::formatter<std::string_view>` and
use `formatter<std::string_view>::format(foo, ctx);` to implement the
`format()` method with {fmt} v9, but we cannot do this with {fmt} v10,
and we would have following compilation failure:
```
FAILED: service/CMakeFiles/service.dir/RelWithDebInfo/topology_state_machine.cc.o
/home/kefu/.local/bin/clang++ -DFMT_DEPRECATED_OSTREAM -DFMT_SHARED -DSCYLLA_BUILD_MODE=release -DSEASTAR_API_LEVEL=7 -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SSTRING -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"RelWithDebInfo\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -ffunction-sections -fdata-sections -O3 -g -gz -std=gnu++20 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-enum-constexpr-conversion -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb=. -march=westmere -mllvm -inline-threshold=2500 -fno-slp-vectorize -U_FORTIFY_SOURCE -Werror=unused-result -MD -MT service/CMakeFiles/service.dir/RelWithDebInfo/topology_state_machine.cc.o -MF service/CMakeFiles/service.dir/RelWithDebInfo/topology_state_machine.cc.o.d -o service/CMakeFiles/service.dir/RelWithDebInfo/topology_state_machine.cc.o -c /home/kefu/dev/scylladb/service/topology_state_machine.cc
/home/kefu/dev/scylladb/service/topology_state_machine.cc:254:41: error: no matching member function for call to 'format'
254 | return formatter<std::string_view>::format(it->second, ctx);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
/usr/include/fmt/core.h:2759:22: note: candidate function template not viable: no known conversion from 'seastar::basic_sstring<char, unsigned int, 15>' to 'const fmt::basic_string_view<char>' for 1st argument
2759 | FMT_CONSTEXPR auto format(const T& val, FormatContext& ctx) const
| ^ ~~~~~~~~~~~~
```
because the inherited `format()` method actually comes from
`fmt::formatter<fmt::string_view>`. to reduce the confusion, in this
change, we just inherit from `fmt::format<string_view>`, where
`string_view` is actually `fmt::string_view`. this follows
the document at
https://fmt.dev/latest/api.html#formatting-user-defined-types,
and since there is less indirection under the hood -- we do not
use the specialization created by `FMT_FORMAT_AS` which inherit
from `formatter<fmt::string_view>`, hopefully this can improve
the compilation speed a little bit. also, this change addresses
the build failure with {fmt} v10.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18299
this function is not used anymore, and it relies on
`FMT_DEPRECATED_OSTREAM` to generated `fmt::formatter` for
`UUID`, and this feature is deprecated in {fmt} v9, and
dropped in {fmt} v10.
in this change, let's drop this member function.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
without `FMT_DEPRECATED_OSTREAM` macro, `UUID::to_sstring()` is
implemented using its `fmt::formatter`, which is not available
at the end of this header file where `UUID` is defined. at this moment,
we still use `FMT_DEPRECATED_OSTREAM` and {fmt} v9, so we can
still use `UUID::to_sstring()`, but in {fmt} v10, we cannot.
so, in this change, we change all callers of `UUID::to_sstring()`
to `fmt::to_string()`, so that we don't depend on
`FMT_DEPRECATED_OSTREAM` and {fmt} v9 anymore.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
The existing `timeuuid_tri_compare` operates on UUIDs serialized in byte
buffers. Introduce a version which operates directly on the
`utils::UUID` type.
To reuse existing comparison code, we serialize to a buffer before
comparing. But we avoid allocations by using `std::array`. Since the
serialized size needs to be known at compile time for `std::array`, mark
`UUID::serialized_size()` as `constexpr`.
`timeuuid_tri_compare` takes `bytes_view` parameters and converts them
to `const int8_t*` before comparing.
Extract the part that operates on `const int8_t*` to separate function
which we will reuse in a later commit.
functinoality wise, `uint64_t_tri_compare()` is identical to the
three-way comparison operator, so no need to keep it. in this change,
it is dropped in favor of <=>.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#13794
this is a part of a series to migrating from `operator<<(ostream&, ..)`
based formatting to fmtlib based formatting. the goal here is to enable
fmtlib to print UUID without using ostream<<. also, this change reimplements
some formatting helpers using fmtlib for better performance and less
dependencies on operator<<(), but we cannot drop it at this moment,
as quite a few caller sites are still using operator<<(ostream&, const UUID&)
and operator<<(ostream&, tagged_uuid<T>&). we will address them separately.
* add fmt::formatter<UUID>
* add fmt::formatter<tagged_uuid<T>>
* implement UUID::to_string() using fmt::to_string()
* implement operator<<(std::ostream&, const UUID&) with fmt::print(),
this should help to improve the performance when printing uuid, as
fmt::print() does not materialize a string when printing the uuid.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
the default generated operator<=> is exactly the same as the
handcrafted one. so let compiler do its job.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
as, in C++20, compiler is able to generate the operator==() for us,
and the default generated one is identical to what we have now.
also, in C++20, operator!=() is generated by compiler if operator==()
is defined, so we can dispense with the former.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
instead of the family of comparison operators, just define <=>. as
in C++20, compiler will define all six comparison operators for us.
in this change, the operator<=> is defined, so we can more compacted
code.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Define table_id as a distinct utils::tagged_uuid modeled after raft
tagged_id, so it can be differentiated from other uuid-class types,
in particular from table_schema_version.
Fixes#11207
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Use the common base class for uuid-based types.
tagged_uuid::to_uuid defined here for backward
compatibility, but it will be renamed in the next patch
to uuid().
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
So it can be used for other types in the system outside
of raft, like counter_id, table_id, table_schema_version,
and more.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Introduce uint64_t based comparator for serialized timeuuids.
Respect Cassandra legacy for timeuuid compare order.
Scylla uses two versions of timeuuid compare:
- one for timeuuid values stored in uuid columns
- a different one for timeuuid values stored in timeuuid columns.
This commit re-implements the implementations of these comparators in
types.cc and deprecates the respective implementations types.cc. They
will be removed in a following patch.
A micro-benchmark at https://github.com/alecco/timeuuid-bench/
shows 2-4x speed up of the new comparators.
* seastar d59fcef...b924495 (2):
> build: Fix protobuf generation rules
> Merge "Restructure files" from Jesse
Includes fixup patch from Jesse:
"
Update Seastar `#include`s to reflect restructure
All Seastar header files are now prefixed with "seastar" and the
configure script reflects the new locations of files.
Signed-off-by: Jesse Haber-Kucharsky <jhaberku@scylladb.com>
Message-Id: <5d22d964a7735696fb6bb7606ed88f35dde31413.1542731639.git.jhaberku@scylladb.com>
"
sprint() recently became more strict, throwing on sprint("%s", 5). Replace
with the more modern format().
Mechanically converted with https://github.com/avikivity/unsprint.
The standard serialization API (e.g. in data_value) includes the following methods:
size_t serialized_size() const;
void serialize(bytes::iterator& it) const;
bytes serialize() const;
Align the utils::UUID API with the pattern above.
The only addition is that we are going to make an output iterator parameter of a second method above
a template so that we may serialize into different output sources.
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
