When direct failure detector was introduces the idea was that it will
run on the same connection raft group0 verbs are running, but in
60f1053087 raft verbs were moved to run on the gossiper connection
while DIRECT_FD_PING was left where it was. This patch move it to
gossiper connection as well and fix the pinger code to run in gossiper
scheduling group.
(cherry picked from commit 86dde50c0d)
Currently, compaction::task_manager_module is stopped in compaction_manager::stop,
concurrently to really_do_stop. We can't predict the order of the two.
Do not set _task_manager_module to nullptr at stop, because
compaction_manager::really_do_stop() may be called before the actual
shutdown, while other components still try to use it.
compaction::task_manager_module does not keep a pointer to compaction_manager,
so we won't end up with memory leak.
Stop compaction module in really_do_stop, after ongoing compactions
are stopped.
It's a preparation for further patches.
(cherry picked from commit 17707d0e6b)
The new service, `auth_integration`, has taken over the responsibility
over managing effective service levels from `service_level_controller`.
However, before these changes, it still accessed `auth::service` via
the service level controller. Let's change that.
Note that we also remove a check that `auth::service` has been
initialized. It's not necessary anymore because the lifetime of
`auth_integration` is strictly nested within the lifetime of `auth::service`.
In actuality, `service_level_controller` should lose its reference to
`auth::service` completely. All of the management over effective service
levels has already been moved to `auth_integration`. However, the
referernce is still needed when dropping a distributed service level
because we need to update the corresponding attribute for relevant
roles.
That should not lead to invalid accesses, though. Dropping a service level
should not be possible when `auth::service` is not initialized.
(cherry picked from commit dd5a35dc67)
We introduce a new type, `auth_integration`, that will be used internally
by `service_level_controller`. Its purpose is to take over the responsibility
over managing effective service levels.
The main problem of the current implementation of service level controller
is its dependency on `auth::service` whose lifetime is strictly nested
within the lifetime of service level controller. That may and already have
led to invalid memory accesses; for an example, see issue
scylladb/scylladb#24792.
Our strategy is to split service level controller into smaller parts and
ensure that we access `auth::service` only when it's valid to do so.
This commit is the first step towards that.
We don't change anything in the logic yet, just add the new type. Further
adjustments will be made in following commits.
(cherry picked from commit 7d0086b093)
Analysis of customer stalls revealed that the function `detail::hash_with_salt` (invoked by `passwords::check`) often blocks the reactor. Internally, this function uses the external `crypt_r` function to compute password hashes, which is CPU-intensive.
This PR addresses the issue in two ways:
1) `sha-512` is now the only password hashing scheme for new passwords (it was already the common-case).
2) `passwords::check` is moved to a dedicated alien thread.
Regarding point 1: before this change, the following hashing schemes were supported by `identify_best_supported_scheme()`: bcrypt_y, bcrypt_a, SHA-512, SHA-256, and MD5. The reason for this was that the `crypt_r` function used for password hashing comes from an external library (currently `libxcrypt`), and the supported hashing algorithms vary depending on the library in use. However:
- The bcrypt schemes never worked properly because their prefixes lack the required round count (e.g. `$2y$` instead of `$2y$05$`). Moreover, bcrypt is slower than SHA-512, so it not good idea to fix or use it.
- SHA-256 and SHA-512 both belong to the SHA-2 family. Libraries that support one almost always support the other, so it’s very unlikely to find SHA-256 without SHA-512.
- MD5 is no longer considered secure for password hashing.
Regarding point 2: the `passwords::check` call now runs on a shared alien thread created at database startup. An `std::mutex` synchronizes that thread with the shards. In theory this could introduce a frequent lock contention, but in practice each shard handles only a few hundred new connections per second—even during storms. There is already `_conns_cpu_concurrency_semaphore` in `generic_server` limits the number of concurrent connection handlers.
Fixes https://github.com/scylladb/scylladb/issues/24524
Backport not needed, as it is a new feature.
Closesscylladb/scylladb#24924
* github.com:scylladb/scylladb:
main: utils: add thread names to alien workers
auth: move passwords::check call to alien thread
test: wait for 3 clients with given username in test_service_level_api
auth: refactor password checking in password_authenticator
auth: make SHA-512 the only password hashing scheme for new passwords
auth: whitespace change in identify_best_supported_scheme()
auth: require scheme as parameter for `generate_salt`
auth: check password hashing scheme support on authenticator start
(cherry picked from commit c762425ea7)
When the configuration option `rf_rack_valid_keyspaces` is enabled and there
is an RF-rack-invalid keyspace, starting a node fails. However, when the
configuration option is disabled, but there still is a keyspace that violates
the condition, we'd like Scylla to print a warning informing the user about
the fact. That's what happens in this commit.
We provide a validation test.
(cherry picked from commit 837d267cbf)
Similar to how large_data_handler is handled, propagate through
sstables::sstables_manager and store its owner: replica::database.
Tests and tools are also patched. Mostly mechanical changes, updating
constructors and patching callers.
(cherry picked from commit ebd9420687)
Truncate doesn't really go well with concurrent writes. The fix (#23560) exposed
a preexisting fragility which I missed.
1) truncate gets RP mark X, truncated_at = second T
2) new sstable written during snapshot or later, also at second T (difference of MS)
3) discard_sstables() get RP Y > saved RP X, since creation time of sstable
with RP Y is equal to truncated_at = second T.
So the problem is that truncate is using a clock of second granularity for
filtering out sstables written later, and after we got low mark and truncate time,
it can happen that a sstable is flushed later within the same second, but at a
different millisecond.
By switching to a millisecond clock (db_clock), we allow sstables written later
within the same second from being filtered out. It's not perfect but
extremely unlikely a new write lands and get flushed in the same
millisecond we recorded truncated_at timepoint. In practice, truncate
will not be used concurrently to writes, so this should be enough for
our tests performing such concurrent actions.
We're moving away from gc_clock which is our cheap lowres_clock, but
time is only retrieved when creating sstable objects, which frequency of
creation is low enough for not having significant consequences, and also
db_clock should be cheap enough since it's usually syscall-less.
Fixes#23771.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#24426
(cherry picked from commit 2d716f3ffe)
Closesscylladb/scylladb#24435
We've adjusted all of the Boost tests so they respect the invariant
enforced by the `rf_rack_valid_keyspaces` configuration option, or
explicitly disabled the option in those that turned out to be more
problematic and will require more attention. Thanks to that, we can
now enable it by default in the test suite.
(cherry picked from commit c60035cbf6)
Currently, stream_manager is initialized after storage_service and
so it is stopped before the storage_service is. In its stop method
storage_service accesses stream_manager which is uninitialized
at a time.
Move stream_manager initialization over the storage_service initialization.
Fixes: #23207.
Closesscylladb/scylladb#24008
(cherry picked from commit 9c03255fd2)
Closesscylladb/scylladb#24190
We don't want each shard to have its own copy of each dictionary.
It would unnecessary pressure on cache and memory.
Instead, we want to share dictionaries between shards.
Before this commit, all dictionaries live on shard 0.
All other shards borrow foreign shared pointers from shard 0.
There's a problem with this setup: dictionary blobs receive many random
accesses. If shard 0 is on a remote NUMA node, this could pose
a performance problem.
Therefore, for each dictionary, we would like to have one copy per NUMA node,
not one copy per the entire machine. And each shard should use the copy
belonging to its own NUMA node. This is the main goal of this patch.
There is another issue with putting all dicts on shard 0: it eats
an assymetric amount of memory from shard 0.
This commit spreads the ownership of dicts over all shards within
the NUMA group, to make the situation more symmetric.
(Dict owner is decided based on the hash of dict contents).
It should be noted that the last part isn't necessarily a good thing,
though.
While it makes the situation more symmetric within each node,
it makes it less symmetric across the cluster, if different node
sizes are present.
If dicts occupy 1% of memory on each shard of a 100-shard node,
then the same dicts would occupy 100% of memory on a 1-shard node.
So for the sake of cluster-wide symmetry, we might later want to consider
e.g. making the memory limit for dictionaries inversely proportional
to the number of shards.
(cherry picked from commit 1bcf77951c)
In next patches, make_sstable_compressor_factory() will have to
disappear.
In preparation for that, we switch to a seastar::thread-dependent
replacement.
(cherry picked from commit 8649adafa8)
`sstable_manager` depends on `sstable_compressor_factory&`.
Currently, `test_env` obtains an implementation of this
interface with the synchronous `make_sstable_compressor_factory()`.
But after this patch, the only implementation of that interface
`sstable_compressor_factory&` will use `sharded<...>`,
so its construction will become asynchronous,
and the synchronous `make_sstable_compressor_factory()` must disappear.
There are several possible ways to deal with this, but I think the
easiest one is to write an asynchronous replacement for
`make_sstable_compressor_factory()`
that will keep the same signature but will be only usable
in a `seastar::thread`.
All other uses of `make_sstable_compressor_factory()` outside of
`test_env::do_with()` already are in seastar threads,
so if we just get rid of `test_env::do_with()`, then we will
be able to use that thread-dependent replacement. This is the
purpose of this commit.
We shouldn't be losing much.
(cherry picked from commit 0e4d0ded8d)
This provides a way for compaction layer to know compaction group's
token range. It will be important for sstable set impl to know
the token range of underlying group.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Fixes the following scenario:
1. Scale out adds new nodes to each rack
2. Table is created - all tablets are allocated to new nodes because they have low load
3. Rebalancing moves tablets from old nodes to new nodes - table balance for the new table is not fixed
We're wrong to try to equalize global load when allocating tablets,
and we should equalize per-table load instead, and let background load
balancing fix it in a fair way. It will add to the allocated storage
imbalance, but:
1. The table is initially empty, so doesn't impact actual storage imbalance.
2. It's more important to avoid overloading CPU on the nodes - imbalance hurts this aspect immediately.
3. If the table was created before imbalance was formed, we would end up in the same situation as in the problematic scenario after the patch.
4. It's the job of the load balancing to keep up with storage growing, and if it's not, scale out should kick in.
Before we have CPU-aware tablet allocation, and thus can prove we have
CPU capacity on the small nodes, we should respect per-table balance
as this is the way in which we achieve full CPU utilization.
Fixes#23631
Backport to 2025.1 because load imbalance is a serious problem in production.
Closesscylladb/scylladb#23708
* github.com:scylladb/scylladb:
tablets: Equalize per-table balance when allocating tablets for a new table
load_sketch: Tolerate missing tablet_map when selecting for a given table
tests: tablets: Simplify tests by moving common code to topology_builder
Changing DC or rack on a node which was already bootstrapped is, in
case of vnodes, very unsafe (almost guaranteed to cause data loss or
unavailability), and is outright not supported if the cluster has
a tablet-backed keyspaces. Moreover, the possibility of doing that
makes it impossible to uphold some of the invariants promised by
the RF-rack-valid flag, which is eventually going to become
unconditionally enabled.
Get rid of the above problems by removing the possibility of changing
the DC / rack of a node. A node will now fail to start if its snitch
reports a different DC or rack than the one that was reported during the
first boot.
Fixes: scylladb/scylladb#23278Fixes: scylladb/scylladb#22869
Marking for backport to 2025.1, as this is a necessary part of the RF-rack-valid saga
Closesscylladb/scylladb#23800
* github.com:scylladb/scylladb:
doc: changing topology when changing snitches is no longer supported
test: cluster: introduce test_no_dc_rack_change
storage_service: don't update DC/rack in update_topology_with_local_metadata
main: make dc and rack immutable after bootstrap
test: cluster: remove test_snitch_change
Changing DC or rack on a node which was already bootstrapped is, in
case of vnodes, very unsafe (almost guaranteed to cause data loss or
unavailability), and is outright not supported if the cluster has
a tablet-backed keyspaces. Moreover, the possibility of doing that
makes it impossible to uphold some of the invariants promised by
the RF-rack-valid flag, which is eventually going to become
unconditionally enabled.
Get rid of the above problems by removing the possibility of changing
the DC / rack of a node. A node will now fail to start if its snitch
reports a different DC or rack than the one that was reported during the
first boot.
Fixes: scylladb/scylladb#23278
Name the gates and phased barriers we use
to make it easy to debug gate_closed_exception
Refs https://github.com/scylladb/seastar/pull/2688
* Enhancement only, no backport needed
Closesscylladb/scylladb#23329
* github.com:scylladb/scylladb:
utils: loading_cache: use named_gate
utils: flush_queue: use named_gate
sstables_manager: use named gate
sstables_loader: use named gate
utils: phased_barrier, pluggable: use named gate
utils: s3::client::multipart_upload: use named gate
utils: s3::client: use named_gate
transport: controller: use named gate
tracing: trace_keyspace_helper: use named gate
task_manager: module: use named gate
topology_coordinator: use named gate
storage_service: use named gate
storage_proxy: wait_for_hint_sync_point: use named gate
storage_proxy: remote: use named gate
service: session: use named gate
service: raft: raft_rpc: use named gate
service: raft: raft_group0: use named gate
service: raft: persistent_discovery: use named gate
service: raft: group0_state_machine: use named gate
service: migration_manager: use named gate
replica: table: use named gate
replica: compaction_group, storage_group: use named gate
redis: query_processor: use named gate
repair: repair_meta: use named gate
reader_concurrency_semaphore: use named gate
raft: server_impl: use named gate
querier_cache: use named gate
gms: gossiper: use named gate
generic_server: use named gate
db: sstables_format_listener: use named gate
db: snapshot: backup_task: use named gate
db: snapshot_ctl: use named gate
hints: hints_sender: use named gate
hints: manager: use named gate
hints: hint_endpoint_manager: use named gate
commitlog: segment_manager: use named gate
db: batchlog_manager: use named gate
query_processor: remote: use named gate
compaction: compaction_state: use named gate
alternator/server: use named_gate
The latter class is invented to let tests access private fields of an
sstable (mostly methods). The former is in fact an extended version of
that also does some checks. Howerver, they don't inherit from each
other, and the sstable_assertions partially duplicates some funtionality
of the test one.
Add the inheritance, remove the duplicated methods from the child class,
update the callers (the test class returns future<>s, the assertions one
"knows" it runs in seastar thread) and marm sstable::read_toc() private.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23697
Can be used to query per-node stats about load as seen by the load
balancer.
In particular, node's capacity will be used by tablet-mon.py to
scale tablet columns so that equal height is equal node utilization.
This kind of benchmark was superseded by perf-alternator
which has more options, workflows and most importantly
measures overhead of http server layer (including json parsing).
There is no need to maintain additional code in perf-simple-query.
Closesscylladb/scylladb#23474
Following the recent refactoring of removing "flat" and "v2" from reader
names, replacing all the fully qualified names with simply "mutation_reader".
Closesscylladb/scylladb#23346
Move `object_storage.yaml` endpoints to `scylla.yaml`
This change also removes the `object_storage.yaml` file
altogether and adds tests for fetching the endpoints
via the `v2/config/object_storage_endpoints` REST api.
Also, `object_storage_config_file` options is moved to a deprecated state as it's no longer needed.
This PR depends on #22951, the reviewers should review patch 393e1ac0ec066475ca94094265a5f88dbbdb1a1f
Refs https://github.com/scylladb/scylladb/issues/22428Closesscylladb/scylladb#22952
* github.com:scylladb/scylladb:
Remove db::config::object_storage_config
Move `object_storage.yaml` endpoints to `scylla.yaml`
Before this patch, `system.dicts` contains only one dictionary, for RPC
compression, with the fixed name "general".
In later parts of this series, we will add more dictionaries to
system.dicts, one per table, for SSTable compression.
To enable that, this patch adjusts the callback mechanism for group0's `write_mutations`
command, so that the mutation callbacks for group0-managed tables can see which
partition keys were affected. This way, the callbacks can query only the
modified partitions instead of doing a full scan. (This is necessary to
prevent quadratic behaviours.)
For now, only the `system.dicts` callback uses the partition keys.
Create a `sstable_compressor_factory_impl` in `scylla_main`,
and pipe it through constructors into `sstables_manager`.
In next commits, the factory available through the `sstables_manager`
will be used to create compressors for SSTable readers and writers.
That map became redundant once we added
object_storage_endpoints in the config, this patch removes
it and switches all the user code to use the new option.
Signed-off-by: Robert Bindar <robert.bindar@scylladb.com>
This PR is an introductory step towards enforcing
RF-rack-valid keyspaces in Scylla.
The scope of changes:
* defining RF-rack-valid keyspaces,
* introducing a configuration option enforcing RF-rack-valid
keyspaces,
* restricting the CREATE and ALTER KEYSPACE statements
so that they never lead to RF-rack invalid keyspaces,
* during the initialization of a node, it verifies that all existing
keyspaces are RF-rack-valid. If not, the initialization fails.
We provide tests verifying that the changes behave as intended.
---
Note that there are a number of things that still need to be implemented.
That includes, for instance, restricting topology operations too.
---
Implementation strategy (going beyond the scope of this PR):
1. Introduce the new configuration option `rf_rack_valid_keyspaces`.
2. Start enforcing RF-rack-validity in keyspaces if the option is enabled.
3. Adjust the tests: in the tree and out of it. Explicitly enable the option in all tests.
4. Once the tests have been adjusted, change the default value of the option to enabled.
5. Stop explicitly enabling the option in tests.
6. Get rid of the option.
---
Fixesscylladb/scylladb#20356Fixesscylladb/scylladb#23276Fixesscylladb/scylladb#23300
---
Backport: this is part of the requirements for releasing 2025.1.
Closesscylladb/scylladb#23138
* github.com:scylladb/scylladb:
main: Refuse to start node when RF-rack-invalid keyspace exists
cql3: Ensure that CREATE and ALTER never lead to RF-rack-invalid keyspaces
db/config: Introduce RF-rack-valid keyspaces
There are several sstring-returning methods on class sstable that return paths to files. Mostly these are used to print them into logs, sometimes are used to be put into exception messages. And there are places that use these strings as file names. Since now sstables can also be stored on S3, generic code shouldn't consider those strings as on disk file names.
Other than that, even when the methods are used to put component names into logs, in many cases these log messages come with debug or trace level, so generated strings are immediately dropped on the floor, but generating it is not extremely cheap. Code would benefit from using lazily-printed names.
This change introduces the component_name struct that wraps sstable reference and component ID (which is a numerical enum of several items). When printed, the component_name formatter calls the aforementioned filename generation, thus implementing lazy printing. And since there's no automatic conversion of component_name-s into strings, all the code that treats them as file paths, becomes explicit.
refs: #14122 (previous ugly attempt to achieve the same goal)
Closesscylladb/scylladb#23194
* github.com:scylladb/scylladb:
sstable: Remove unused malformed_sstable_exctpion(string filename)
sstables: Make filename() return component_name
sstables: Make file_writer keep component_name on board
sstables: Make get_filename() return component_name
sstables: Make toc_filename() return component_name
sstables: Make sstable::index_filename() return component_name
sstables: Introduce struct component_name
sstables: Remove unused sstable::component_filenames() method
sstables: Do not print component filenames on load-and-stream wrap-up
sstables: Explicitly format prefix in S3 object name making
sstables: Don't include directory name in exception
sstables: Use fmt::format instead of string concatenation
sstables: Rename filename($component) calls to ${component}_filename()
sstables: Rename local filename variable to component_name
When a node is started with the option `rf_rack_valid_keyspaces`
enabled, the initialization will fail if there is an RF-rack-invalid
keyspace. We want to force the user to adjust their existing
keyspaces when upgrading to 2025.* so that the invariant that
every keyspace is RF-rack-valid is always satisfied.
Fixesscylladb/scylladb#23300
Similarly to toc_, index_ and data filenames, make the generic component
name getter return back not string, but a wrapper object. Most of
callers are log messages and exception generations. Other than that
there are tests, filesystem storage driver and few more places in
generic code who "know" that they work with real files, so make them use
explicit fmt::to_string().
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Most of the callers use the returned value as log message parameter,
some construct malformed_sstable_exception that was prepared by previous
patch.
The remaining callers explicitly use fmt::to_string(), these are
- pending deletion log creation
- filesystem storage code
- tests
- stream-blob code that re-loads sstable
All but the last one are OK to use string toc name, the last one is not
very correct in its usage of toc_filename string, but it needs more care
to be fixed properly.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There's a generic sstable::filename(component_type) method that returns
a file name for the given component. For "popular" components, namely
TOC, Data and Index there are dedicated sstable methods to get their
names. Fix existing callers of the generic method to use the former.
It's shorter, nicer and makes further patching simpler.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This series adds an async guard to system_keyspace operations
and adds a deferred action to stop the system_keyspace in main() before destroying the service.
This helps to make sure that sys_ks is unplugged from its users and that all async operations using it are drained once it's stopped.
* Enhancement, no backport needed
Closesscylladb/scylladb#23113
* github.com:scylladb/scylladb:
main: stop system keyspace
system_keyspace: call shutdown from stop
system_keyspace: shutdown: allow calling more than once
database, compaction_manager, large_data_handler: use pluggable<system_keysapce>
utils: add class pluggable
"
This is series starts conversion of the gossiper to use host ids to
index nodes. It does not touch the main map yet, but converts a lot of
internal code to host id. There are also some unrelated cleanups that
were done while working on the series. On of which is dropping code
related to old shadow round. We replaced shadow round with explicit
GOSSIP_GET_ENDPOINT_STATES verb in cd7d64f588
which is in scylla-4.3.0, so there should be no compatibility problem.
We already dropped a lot of old shadow round code in previous patches
anyway.
I tested manually that old and new node can co-exist in the same
cluster,
"
* 'gleb/gossiper-host-id-v2' of github.com:scylladb/scylla-dev: (33 commits)
gossiper: drop unneeded code
gossiper: move _expire_time_endpoint_map to host_id
gossiper: move _just_removed_endpoints to host id
gossiper: drop unused get_msg_addr function
messaging_service: change connection dropping notification to pass host id only
messaging_service: pass host id to remove_rpc_client in down notification
treewide: pass host id to endpoint_lifecycle_subscriber
treewide: drop endpoint life cycle subscribers that do nothing
load_meter: move to host id
treewide: use host id directly in endpoint state change subscribers
treewide: pass host id to endpoint state change subscribers
gossiper: drop deprecated unsafe_assassinate_endpoint operation
storage_service: drop unused code in handle_state_removed
treewide: drop endpoint state change subscribers that do nothing
gossiper: drop ip address from handle_echo_msg and simplify code since host_id is now mandatory
gossiper: start using host ids to send messages earlier
messaging_service: add temporary address map entry on incoming connection
topology_coordinator: notify about IP change from sync_raft_topology_nodes as well
treewide: move everyone to use host id based gossiper::is_alive and drop ip based one
storage_proxy: drop unused template
...
Before this patch, the load balancer was equalizing tablet count per
shard, so it achieved balance assuming that:
1) tablets have the same size
2) shards have the same capacity
That can cause imbalance of utilization if shards have different
capacity, which can happen in heterogeneous clusters with different
instance types. One of the causes for capacity difference is that
larger instances run with fewer shards due to vCPUs being dedicated to
IRQ handling. This makes those shards have more disk capacity, and
more CPU power.
After this patch, the load balancer equalizes shard's storage
utilization, so it no longer assumes that shards have the same
capacity. It still assumes that each tablet has equal size. So it's a
middle step towards full size-aware balancing.
One consequence is that to be able to balance, the load balancer need
to know about every node's capacity, which is collected with the same
RPC which collects load_stats for average tablet size. This is not a
significant set back because migrations cannot proceed anyway if nodes
are down due to barriers. We could make intra-node migration
scheduling work without capacity information, but it's pointless due
to above, so not implemented.
Also, per-shard goal for tablet count is still the same for all nodes in the cluster,
so nodes with less capacity will be below limit and nodes with more capacity will
be slightly above limit. This shouldn't be a significant problem in practice, we could
compensate for this by increasing the limit.
Refs #23042Closesscylladb/scylladb#23079
* github.com:scylladb/scylladb:
tablets: Make load balancing capacity-aware
topology_coordinator: Fix confusing log message
topology_coordinator: Refresh load stats after adding a new node
topology_coordinator: Allow capacity stats to be refreshed with some nodes down
topology_coordinator: Refactor load status refreshing so that it can be triggered from multiple places
test: boost: tablets_test: Always provide capacity in load_stats
test: perf_load_balancing: Set node capacity
test: perf_load_balancing: Convert to topology_builder
config, disk_space_monitor: Allow overriding capacity via config
storage_service, tablets: Collect per-node capacity in load_stats
We want to move to use host ids as soon as possible. Currently it is
possible only after the full gossiper exchange (because only at this
point gossiper state is added and with it address map entry). To make it
possible to move to host ids earlier this patch adds address map entries
on incoming communication during CLIENT_ID verb processing. The patch
also adds generation to CLIENT_ID to use it when address map is updated.
It is done so that older gossiper entries can be overwritten with newer
mapping in case of IP change.
Move shared_load_stats to topology_builder.hh so that topology_builder
can maintain it. It will set capacity for all created nodes. Needed
after load balancer requires capacity to make decisions.
Intended for testing, or hot-fixing out-of-space issues in production.
Tablet load balancer uses this information for determining per-shard load
so reducing capacity will cause tablets to be migrated away from the node.
The scylla-sstable dump-* command suite has proven invaluable in many investigations. In certain cases however, I found that `dump-data` is quite cumbersome. An example would be trying to find certain values in an sstable, or trying to read the content of system tables when a node is down. For these cases, `dump-data` is very cumbersome: one has to trudge through tons of uninteresting metadata and do compaction in their heads. This PR introduces the new scylla-sstable query command, specifically targeted at situations like this: it allows executing queries on sstables, exposing to the user all the power of CQL, to tailor the output as they see fit.
Select everything from a table:
$ scylla sstable query --system-schema /path/to/data/system_schema/keyspaces-*/*-big-Data.db
keyspace_name | durable_writes | replication
-------------------------------+----------------+-------------------------------------------------------------------------------------
system_replicated_keys | true | ({class : org.apache.cassandra.locator.EverywhereStrategy})
system_auth | true | ({class : org.apache.cassandra.locator.SimpleStrategy}, {replication_factor : 1})
system_schema | true | ({class : org.apache.cassandra.locator.LocalStrategy})
system_distributed | true | ({class : org.apache.cassandra.locator.SimpleStrategy}, {replication_factor : 3})
system | true | ({class : org.apache.cassandra.locator.LocalStrategy})
ks | true | ({class : org.apache.cassandra.locator.NetworkTopologyStrategy}, {datacenter1 : 1})
system_traces | true | ({class : org.apache.cassandra.locator.SimpleStrategy}, {replication_factor : 2})
system_distributed_everywhere | true | ({class : org.apache.cassandra.locator.EverywhereStrategy})
Select everything from a single SSTable, use the JSON output (filtered through [jq](https://jqlang.github.io/jq/) for better readability):
$ scylla sstable query --system-schema --output-format=json /path/to/data/system_schema/keyspaces-*/me-3gm7_127s_3ndxs28xt4llzxwqz6-big-Data.db | jq
[
{
"keyspace_name": "system_schema",
"durable_writes": true,
"replication": {
"class": "org.apache.cassandra.locator.LocalStrategy"
}
},
{
"keyspace_name": "system",
"durable_writes": true,
"replication": {
"class": "org.apache.cassandra.locator.LocalStrategy"
}
}
]
Select a specific field in a specific partition using the command-line:
$ scylla sstable query --system-schema --query "select replication from scylla_sstable.keyspaces where keyspace_name='ks'" ./scylla-workdir/data/system_schema/keyspaces-*/*-Data.db
replication
-------------------------------------------------------------------------------------
({class : org.apache.cassandra.locator.NetworkTopologyStrategy}, {datacenter1 : 1})
Select a specific field in a specific partition using ``--query-file``:
$ echo "SELECT replication FROM scylla_sstable.keyspaces WHERE keyspace_name='ks';" > query.cql
$ scylla sstable query --system-schema --query-file=./query.cql ./scylla-workdir/data/system_schema/keyspaces-*/*-Data.db
replication
-------------------------------------------------------------------------------------
({class : org.apache.cassandra.locator.NetworkTopologyStrategy}, {datacenter1 : 1})
New functionality: no backport needed.
Closesscylladb/scylladb#22007
* github.com:scylladb/scylladb:
docs/operating-scylla: document scylla-sstable query
test/cqlpy/test_tools.py: add tests for scylla-sstable query
test/cqlpy/test_tools.py: make scylla_sstable() return table name also
scylla-sstable: introduce the query command
tools/utils: get_selected_operation(): use std::string for operation_options
utils/rjson: streaming_writer: add RawValue()
cql3/type_json: add to_json_type()
test/lib/cql_test_env: introduce do_with_cql_env_noreentrant_in_thread()
Previously, variables were marked as const, causing std::move() calls to
be redundant as reported by GCC warnings. This change either removes
const qualifiers or marks related lambdas as mutable, allowing the
compiler to properly utilize move constructors for better performance.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23066
Replace boost::accumulate() calls with std::ranges facilities. This
change reduces external dependencies and modernizes the codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23062
Fixes#22314
Adds expected schema extensions to the tools extension set (if used). Also uses the source config extensions in schema loader instead of temp one, to ensure we can, for example, load a schema.cql with things like `tombstone_gc` or encryption attributes in them.
Bundles together the setup of "always on" schema extensions into a single call, and uses this from the three (3) init points.
Could have opted for static reg via `configurables`, but since we are moving to a single code base, the need for this is going away, hence explicit init seems more in line.
Closesscylladb/scylladb#22327
* github.com:scylladb/scylladb:
tools: Add standard extensions and propagate to schema load
cql_test_env: Use add all extensions instead of inidividually
main: Move extensions adding to function
tomstone_gc: Make validate work for tools
