At least on Debian8, mk-build-deps -i silently finishes with return code 0
even it fails to install dependencies.
To prevent this, we should manually install the metapackage generated by
mk-build-deps using gdebi.
Fixes#2445
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1496737502-10737-2-git-send-email-syuu@scylladb.com>
(cherry picked from commit a4c392c113)
Installing openjdk-8-jre-headless from jessie-backports breaks texlive on
jessie main repo.
It causes 'Unmet build dependencies' error when building gdb package.
To prevent this, force insatlling texlive from jessie-backports before start
building gdb.
Fixes#2444
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1496737502-10737-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit 5608842e96)
"This series adds private repository support to scylla-housekeeping"
* 'amnon/housekeeping_private_repo_v3' of github.com:cloudius-systems/seastar-dev:
scylla-housekeeping service: Support private repositories
scylla-housekeeping-upstart: Use repository id, when checking for version
scylla-housekeeping: support private repositories
(cherry picked from commit eb69fe78a4)
During the changes in the way the housekeeping check for newer version
and warn about it in the installation the UUID part was removed but kept
in the sarounding if.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <20170426075724.7132-1-amnon@scylladb.com>
(cherry picked from commit b59c95359d)
We set the scheduler wakeup granularity to 500usec, because that is the
difference in runtime we want to see from a waking task before it
preempts the running task (which will usually be Scylla). Scheduling
other processes less often is usually good for Scylla, but in this case,
one of the "other processes" is also a Scylla thread, the one we have
been using for marking ticks after we have abandoned signals.
However, there is an artifact from the Linux scheduler that causes those
preemption to be missed if the wakeup granularity is exactly twice as
small as the sched_latency. Our sched_latency is set to 1ms, which
represents the maximum time period in which we will run all runnable
tasks.
We want to keep the sched_latency at 1ms, so we will reduce the wakeup
granularity so to something slightly lower than 500usec, to make sure
that such artifact won't affect the scheduler calculations. 499.99usec
will do - according to my tests, but we will reduce it to a round
number.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20170427135039.8350-1-glauber@scylladb.com>
(cherry picked from commit 14b9aa2285)
Discarding blocks on large RAID volume takes too much time, user may suspects
the script doesn't works correctly, so it's better to skip, do discard directly on each volume instead.
Fixes#1896
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1489533460-30127-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit b65d58e90e)
This patch exposes Scylla's Prometheus port by default. You can now use
the Scylla Monitoring project with the Docker image:
https://github.com/scylladb/scylla-grafana-monitoring
To configure the IP addresses, use the 'docker inspect' command to
determine Scylla's IP address (assuming your running container is called
'some-scylla'):
docker inspect --format='{{ .NetworkSettings.IPAddress }}' some-scylla
and then use that IP address in the prometheus/scylla_servers.yml
configuration file.
Fixes#1827
Message-Id: <1490008357-19627-1-git-send-email-penberg@scylladb.com>
(cherry picked from commit 85a127bc78)
On Ubuntu 14.04, the lsblk doesn't have '-p' option, but
`scylla_setup` try to get block list by `lsblk -pnr` and
trigger error.
Current simple pattern will match all help content, it might
match wrong options.
scylla-test@amos-ubuntu-1404:~$ lsblk --help | grep -e -p
-m, --perms output info about permissions
-P, --pairs use key="value" output format
Let's use strict pattern to only match option at the head. Example:
scylla-test@amos-ubuntu-1404:~$ lsblk --help | grep -e '^\s*-D'
-D, --discard print discard capabilities
Signed-off-by: Amos Kong <amos@scylladb.com>
Message-Id: <4f0f318353a43664e27da8a66855f5831457f061.1489712867.git.amos@scylladb.com>
(cherry picked from commit 468df7dd5f)
The current test for whether or not the filesystem is mounted is weak
and will fail if multiple pieces of the hierarchy are mounted.
util-linux ships with a mountpoint command that does exactly that,
so we'll use that instead.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <1488742801-4907-1-git-send-email-glauber@scylladb.com>
(cherry picked from commit 2d620a25fb)
By default behavior is kept the same. There are deployments in which we
would like to mount data and commitlog to different places - as much as
we have avoided this up until this moment.
One example is EC2, where users may want to have the commitlog mounted
in the SSD drives for faster writes but keep the data in larger, less
expensive and durable EBS volumes.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <1488258215-2592-1-git-send-email-glauber@scylladb.com>
(cherry picked from commit 9e61a73654)
Since gcc-5/stretch=5.4.1-2 removed from apt repository, we nolonger able to
build gcc-5.
To avoid dead link, use launchpad.net archives instead of using apt-get source.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1488189378-5607-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit ba323e2074)
ninja-build-1.6.0-2.fc23.src.rpm on fedora web site deleted for some
reason, but there is ninja-build-1.7.2-2 on EPEL, so we don't need to
backport from Fedora anymore.
Fixes#2087
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1487155729-13257-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit 9c8515eeed)
scylla-housekeeping requires to run 'restart mode' for check the version during
scylla-server restart, which wasn't called on systemd timer so added it.
Existing scylla-housekeeping.timer renamed to scylla-housekeeping-daily.timer,
since it is running 'daily mode'.
Fixes#1953
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1486180031-18093-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit e82932b774)
Since scylla-housekeeping running as scylla user, it doesn't have a permission
to create a file on /etc/scylla.d.
So introduce /var/lib/scylla-housekeeping which owns by scylla user, place uuid
file on the directory.
Fixes#2009
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1484235946-12463-1-git-send-email-syuu@scylladb.com>
On DPDK 16.11 dpdk_nic_bind.py is renamed to dpdk-devbind.py, so we are
getting "file not found" both on packaging and scripts, fixed that.
Also fixed inconsistent packaging.
Since Seastar copied dpdk_nic_bind.py to its scripts/ directory, there're two
different versions of the script, .rpm/.deb packaging different one:
dist/redhat: seastar/dpdk/tools/dpdk_nic_bind.py
dist/ubuntu: seastar/scripts/dpdk_nic_bind.py
That's won't work because we sharing setup scripts between two
distributions, so I changed dist/ubuntu package to use DPDK one.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1484191955-28006-1-git-send-email-syuu@scylladb.com>
Ubuntu Packaging Guide says if there's no upstream package (means it's not
ported from Debian), revision should be "0ubuntu1", not "ubuntu1" which is we
currently using.
On Debian, Debian Policy Manual says it's conventional to restart revision from 1 when upstream version increased, so we should specify it to "1".
To do it in single script, we will generate the revision on building time.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1483498658-27491-1-git-send-email-syuu@scylladb.com>
This patch adds uuid file support for ubuntu system. It also split the
behaviour between restart and daily checks. The first run in r mode and
the second in d mode.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
