Update the SCYLLA_REPO_URL and VERSION defaults to point to the latest
unstable 4.0 version. This will be used if someone runs "docker build"
locally. For the releases, the release pipelines will pass the stable
version repository URL and a specific release version.
Currently, the Dockerfile installs the latest version of Scylla. Let's
add a VERSION argument to Dockerfile, which explicitly specifies the
version to ensure scripts, for example, always build the expected
version. If no VERSION is specified for "docker build", use the default
value of "666.development", which is the version number for latest
nightly.
The introduction of rsyslog had two errors in it.
Both errors are non fatal and the docker still works,
however, the system is left in a wrong state in which
supervisord marks rsyslogd service as failed (after several
failed retry attempts). Another bug in the configuration
causes rsyslog to output an error.
1) An inclusion command from a newer version was used
in rsyslogs main configuration file. This caused to rsyslog
to complain during startup but it didn't do much damage since
rsyslog converts every unrecognised command to a message command.
2) in the supervisord definition of the service, rsyslogd is ran
without the -n option which means it defaults to automatically
switch to the background. Supervisord interpret this as an unexpected
process termination and retries to start the process (unsuccessfully
because rsyslog protects itself from having multiple processes of
itself) and eventually marks it as down although it is fully up and
running.
This commit fixes both configuration problems.
Tests: Build and run docker and validate the errors are gone.
Fixes#5937
This reverts commit 65aadad9a6. It causes
crashes (due to the coredump test) during package install, since scylla_coredump_setup
is called from rpm postinstall. The test should be done only from scylla_setup (and
the user should be warned).
Fixes#5916.
To install scylla using install.sh easily, we need to run following things:
- add scylla user/group
- configure scylla.yaml
- run scylla_post_install.sh
But we don't want to run them when we build .rpm/.deb package,
we also need to add --packaging option to skip them.
Fixes#5830
On some environment systemd-coredump does not work with symlink directory,
we can use bind-mount instead.
Also, it's better to check systemd-coredump is working by generating coredump.
Fixes#5753
Since we set 'eth0' as default NIC name, we get following error when running scylla_setup in non-interactive mode without --nic parameter:
$ sudo scylla_setup --setup-nic-and-disks --no-raid-setup --no-verify-package --no-io-setup
NIC eth0 doesn't exist.
It looks strange since user actually does not specified 'eth0', they might forget to specify --nic.
I think we should shows up usage, when eth0 is not available on the system.
Fixes#5828
It seems like *.service is conflicting on install time because the file
installed twice, both debian/*.service and debian/scylla-server.install.
We don't need to use *.install, so we can just drop the line.
Fixes#5640
By default, `/usr/lib/rpm/find-debuginfo.sh` will temper with
the binary's build-id when stripping its debug info as it is passed
the `--build-id-seed <version>.<release>` option.
To prevent that we need to set the following macros as follows:
unset `_unique_build_ids`
set `_no_recompute_build_ids` to 1
Fixes#5881
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
On Debian, we don't add xfsprogs/mdadm on package dependency, install on
scylla_raid_setup script instead.
Since xfsprogs/mdadm only needed for constructing RAID, we can move
dependencies to scylla_raid_setup too.
One of the logging options for Scylla is syslog, this method,
until today wasn't supported in the docker images that are
created with the Dockerfile in the repo.
This commit add rsyslog installation, configuration and
setup for Docker.
Tests: built and ran the docker and validated the existance
of the /dev/log socket.
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Message-Id: <20200210112448.210169-1-eliransin@scylladb.com>
Since dpkg does not re-install conffiles when it removed by user,
currently we are missing dependencies.conf and sysconfdir.conf on rollback.
To prevent this, we need to stop running
'rm -rf /etc/systemd/system/scylla-server.service.d/' on 'remove'.
Fixes#5734
We made --localrpm option to automatically build rpms from sourcecode,
but we actually use the option to produce AMI using prebuilt rpm on our
CI.
To simplified the script, and to prevent accsidently start rpm build
in the script, drop rpm build part.
Currently --ami does not check instance types, creates invalid
io_properties.yaml on unsupported instance types.
It actually won't occur on AMI startup, since scylla_ami_setup only
invoke scylla_io_setup --ami when the instance is supported, so we don't
get the issue on startup, but we still get when we run scylla_io_setup
manually.
It's better to check instance type on scylla_io_setup, too.
Refs #5438
We need to add '~' to handle rcX version correctly on Debian variants
(merged at ae33e9f), but when we moved to relocated package we mistakenly
dropped the code, so add the code again.
Fixes#5641
Update Packer to 1.5.1.
Needed to rename clean_ami_name -> clean_resource_name on scylla.json, since
the variable name had been changed.
Also fixed checksum verification code, trimmed unwanted extra strings
from sha256sum output.
The Ubuntu-based Docker image uses Scylla 1.0 and has not been updated
since 2017. Let's remove it as unmaintained.
Message-Id: <20200115102405.23567-1-penberg@scylladb.com>
commit 21dec3881c introduced
a bug that will cause scylla debian build to fail. This is
because the commit relied on the environment PRODUCT variable
to be exported (and as a result, to propogate to the rename
command that is executed by find in a subshell)
This commit fixes it by explicitly passing the PRODUCT variable
into the rename command.
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Message-Id: <20200106102229.24769-1-eliransin@scylladb.com>
VERSION_ID of centos7 is "7", but VERSION_ID of oel7.7 is "7.7"
scylla_ntp_setup doesn't work on OEL7.7 for ValueError.
- ValueError: invalid literal for int() with base 10: '7.7'
This patch changed redhat_version() to return version string, and compare
with parse_version().
Fixes#5433
Signed-off-by: Amos Kong <amos@scylladb.com>
rpm compression uses xz, which is painfully slow. Adjust the
compression settings to run on all threads.
The xz utility documentation suggests that 0 threads is
equivalent to all CPUs, but apparently the library interface
(which rpmbuild uses) doesn't think the same way.
Message-Id: <20200101141544.1054176-1-avi@scylladb.com>
When the product name is other than "scylla", the debian
packaging scripts go over all files that starts with "scylla-"
and change the prefix to be the actual product name.
However, if there are no such files in the directory
the script will fail since the renaming command will
get the wildcard string instrad of an actual file name.
This patch replaces the command with a command with
an equivalent desired effect that only operates on files
if there are any.
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Message-Id: <20191230143250.18101-1-eliransin@scylladb.com>
Since we merged /usr/lib/scylla with /opt/scylladb, we removed
/usr/lib/scylla and replace it with the symlink point to /opt/scylladb.
However, RPM does not support replacing a directory with a symlink,
we are doing some dirty hack using RPM scriptlet, but it causes
multiple issues on upgrade/downgrade.
(See: https://docs.fedoraproject.org/en-US/packaging-guidelines/Directory_Replacement/)
To minimize Scylla upgrading/downgrade issues on user side, it's better
to keep /usr/lib/scylla directory.
Instead of creating single symlink /usr/lib/scylla -> /opt/scylladb,
we can create symlinks for each setup scripts like
/usr/lib/scylla/<script> -> /opt/scylladb/scripts/<script>.
Fixes#5522Fixes#4585Fixes#4611
A Linux machine typically has multiple clocksources with distinct
performances. Setting a high-performant clocksource might result in
better performance for ScyllaDB, so this should be considered whenever
starting it up.
This patch introduces the possibility of enforcing optimized Linux
clocksource to Scylla's setup/start-up processes. It does so by adding
an interactive question about enforcing clocksource setting to scylla_setup,
which modifies the parameter "CLOCKSOURCE" in scylla_server configuration
file. This parameter is read by perftune.py which, if set to "yes", proceeds
to (non persistently) setting the clocksource. On x86, TSC clocksource is used.
Fixes#4474Fixes#5474Fixes#5480
"
These series solves an issue with scylla_setup and prevent it from
waiting forever if housekeeping cannot look for the new Scylla version.
Fixes#5302
It should be backported to versions that support offline installations.
"
* 'scylla_setup_timeout' of git://github.com/amnonh/scylla:
scylla_setup: do not wait forever if no reply is return housekeeping
scylla_util.py: Add optional timeout to out function
When scylla is installed without a network connectivity, the test if a
newer version is available can cause scylla_setup to wait forever.
This patch adds a limit to the time scylla_setup will wait for a reply.
When there is no reply, the relevent error will be shown that it was
unable to check for newer version, but this will not block the setup
script.
Fixes#5302
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
This reverts commit 4333b37f9e. It breaks upgrades,
and the user question is not informative enough for the user to make a correct
decision.
Fixes#5478.
Fixes#5480.
Iterate over an array holding all rpm names to see if any
of them is missing from `dist/ami/files`. If they are missing,
look them up in build/redhat/RPMS/x86_64 so that if reloc/build_rpm.sh
was run manually before dist/ami/build_ami.sh we can just collect
the built rpms from its output dir.
If we're still missing any rpms, then run reloc/build_rpm.sh
and copy the required rpms from build/redhat/RPMS/x86_64.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Reviewed-by: Glauber Costa <glauber@scylladb.com>
The ami description attribute is only allowed to be 255
characters long. When build_ami.sh generates an ami, it
generates an ami description which is a concatenation
of all of the componnents version strings. It can
happen that the description string is too long which
eventually causes the ami build to fail. This patch
trims the description string to 255 characters.
It is ok since the individual versions of the components
are also saved in tags attached to the image.
Tests:
1. Reproduced with a long description and
validated that it doesn't fail after the fix.
Fixes#5435
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Message-Id: <20191209141143.28893-1-eliransin@scylladb.com>
A Linux machine typically has multiple clocksources with distinct
performances. Setting a high-performant clocksource might result in
better performance for ScyllaDB, so this should be considered whenever
starting it up.
This patch introduces the possibility of enforcing optimized Linux
clocksource to Scylla's setup/start-up processes. It does so by adding
an interactive question about enforcing clocksource setting to scylla_setup,
which modifies the parameter "CLOCKSOURCE" in scylla_server configuration
file. This parameter is read by perftune.py which, if set to "yes", proceeds
to (non persistently) setting the clocksource. On x86, TSC clocksource is
used.
Fixes#4474
The vm.swappiness sysctl controls the kernel's prefernce for swapping
anonymous memory vs page cache. Since Scylla uses very large amounts
of anonymous memory, and tiny amounts of page cache, the correct setting
is to prefer swapping page cache. If the kernel swaps anonymous memory
the reactor will stall until the page fault is satisfied. On the other
hand, page cache pages usually belong to other applications, usually
backup processes that read Scylla files.
This setting has been used in production in Scylla Cloud for a while
with good results.
Users can opt out by not installing the scylla-kernel-conf package
(same as with the other kernel tunables).
We may able to use chrony setup script on future version of RHEL/CentOS,
it better to run chrony setup when RHEL version >= 8, not only 8.
Note that on Fedora it still provides ntp/ntpdate package, so we run
ntp setup on it for now. (same on debian variants)
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <20191203192812.5861-1-syuu@scylladb.com>
Currently interactive RAID setup prompt does not list virtio-blk devices due to
following reasons:
- We fail matching '-p' option on 'lsblk --help' output since misusage of
regex functon, list_block_devices() always skipping to use lsblk output.
- We don't check existance of /dev/vd* when we skipping to use lsblk.
- We mistakenly excluded virtio-blk devices on 'lsblk -pnr' output using '-e'
option, but we actually needed them.
To fix the problem we need to use re.search() instead of re.match() to match
'-p' option on 'lsblk --help', need to add '/dev/vd*' on block device list,
then need to stop '-e 252' option on lsblk which excludes virtio-blk.
Additionally, it better to parse 'TYPE' field of lsblk output, we should skip
'loop' devices and 'rom' devices since these are not disk devices.
Fixes#4066
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <20191201160143.219456-1-syuu@scylladb.com>
