Update docs for backup procedure to use `DESC SCHEMA WITH INTERNALS`
instead of plain `DESC SCHEMA`.
Add a note to use cqlsh in a proper version (at least 6.0.19).
Closesscylladb/scylladb#18953
(cherry picked from commit 5b4e688668)
Separate keyspace which also behaves as system brings
little benefit while creating some compatibility problems
like schema digest mismatch during rollback. So we decided
to move auth tables into system keyspace.
Fixes https://github.com/scylladb/scylladb/issues/18098Closesscylladb/scylladb#18769
(cherry picked from commit 2ab143fb40)
[avi: adjust test/alternator/suite.yaml to reflect new keyspace]
This commit fixes the incorrect Raft-related information on the Handling Cluster Membership Change Failures page
introduced with https://github.com/scylladb/scylladb/pull/17500.
The page describes the procedure for when Raft is disabled. Since 6.0, Raft for consistent schema management
is enabled and mandatory (cannot be disabled), this commit adds the procedure for Raft-enabled setups.
(cherry picked from commit 6626d72520)
Closesscylladb/scylladb#18858
This commit includes updates related to replacing system_auth with system_auth_v2.
- The keyspace name system_auth is renamed to system_auth_v2.
- The procedures are updated to account for system_auth_v2.
- No longer required system_auth RF changes are removed from procedures.
- The information is added that if the consistent topology updates feature
was not enabled upon upgrade from 5.4, there are limitations or additional
steps to do (depending on the procedure).
The files with that kind of information are to be found in _common folders
and included as needed.
- The upgrade guide has been updated to reflect system_auth_v2 and related impacts.
Closesscylladb/scylladb#18077
To change snitch with raft all nodes need to be started simultaneously
since each node will try to update its state in the raft and for that
quorum is required.
This commit removes the redundant
"Cluster membership changes and LWT consistency" page.
The page is no longer useful because the Raft algorithm
serializes topology operations, which results in
consistent topology updates.
Closesscylladb/scylladb#17523
This commit updates the Handling Cluster Membership Change Failures page
with reference to the Raft-related topology.
Specifically, it adds a note that the page only applies when
Raft-based topology is not enabled.
In addition, it removes the Raft-enabled option.
This commit updates the Replace a Dead Node page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to replace the nodes one by one and the requirement to ensure
that the the replaced node will never come back to the cluster
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Remove a Node page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to remove the nodes one by one and the requirement to ensure
that the the removed node will never come back to the cluster
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Add a New DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Add a New Node (Out Scale) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, a warning is added to indicate the limitations
when Raft-base topology is not enabled upon upgrade from 5.4.
This commit updates the Create Cluster (EC2) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
This commit updates the Create Cluster (Multi DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
This commit updates the Create Cluster (Single DC) page
with reference to the Raft-related topology.
Specifically, it removes the previous pre-Raft limitation
to bootstrap the nodes one by one.
In addition, it updates the concept of the seed node.
This PR removes information about outdated versions, including disclaimers and information when a given feature was added.
Now that the documentation is versioned, information about outdated versions is unnecessary (and makes the docs harder to read).
Fixes https://github.com/scylladb/scylladb/issues/12110Closesscylladb/scylladb#17430
We remove Raft documentation irrelevant in 5.5.
One of the changes is removing a part of the "Enabling Raft" section
in raft.rst. Since Raft is mandatory in 5.5, the only way to enable
it in this version is by performing a rolling upgrade from 5.4. We
only need to have this case well-documented. In particular, we
remove information that also appears in the upgrade guides like
verifying schema synchronization.
Similarly, we remove a sentence from the "Manual Recovery Procedure"
section in handling-node-failures.rst because it mentions enabling
Raft manually, which is impossible in 5.5.
The rest of the changes are just removing information about
checking or setting consistent_cluster_management, which has become
unused.
This commit updates the Repair-Based Node
Operations page. In particular:
- Information about RBNO enabled for all
node operations is added (before 5.4, RBNO
was enabled for the replace operation, while
it was experimental for others).
- The content is rewritten to remove redundant
information about previous versions.
The improvement is part of the 5.4 release.
This commit must be backported to branch-5.4
Closesscylladb/scylladb#16015
Fixes https://github.com/scylladb/scylladb/issues/14490
This commit fixes mulitple links that were broken
after the documentation is published (but not in
the preview) due to incorrect syntax.
I've fixed the syntax to use the :docs: and :ref:
directive for pages and sections, respectively.
Closes#14664
This is V2 of https://github.com/scylladb/scylladb/pull/14108
This commit moves the installation instruction for the cloud from the [website ](https://www.scylladb.com/download/)to the docs.
The scope:
* Added new files with instructions for AWS, GCP, and Azure.
* Added the new files to the index.
* Updating the "Install ScyllaDB" page to create the "Cloud Deployment" section.
* Adding new bookmarks in other files to create stable links, for example, ".. _networking-ports:"
* Moving common files to the new "installation-common" directory. This step is required to exclude the open source-only files
in the Enterprise repository.
In addition:
- The Configuration Reference file was moved out of the installation
section (it's not about installation at all)
- The links to creating a cluster were removed from the installation
page (as not related).
Related: https://github.com/scylladb/scylla-docs/issues/4091
"Enable_repair_based_node_ops" is the name of an option, and the leading
character should be lowecase "e". so fix it.
Fixes#14017
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14018
Fixes https://github.com/scylladb/scylladb/issues/13578
Now that the documentation is versioned, we can remove
the .. versionadded:: and .. versionchanged:: information
(especially that the latter is hard to maintain and now
outdated), as well as the outdated information about
experimental features in very old releases.
This commit removes that information and nothing else.
Closes#13680
After a failed topology operation, like bootstrap / decommission /
removenode, the cluster might contain a garbage entry in either token
ring or group 0. This entry can be cleaned-up by executing removenode on
any other node, pointing to the node that failed to bootstrap or leave
the cluster.
Document this procedure, including a method of finding the host ID of a
garbage entry.
Add references in other documents.
Fixes: #13122Closes#13186
Fixes https://github.com/scylladb/scylladb/issues/13106
This commit removes the information that BYPASS CACHE
is an Enterprise-only feature and replaces that info
with the link to the BYPASS CACHE description.
Closes#13316
Related: https://github.com/scylladb/scylladb/issues/13119
This commit removes the pages that describe Enterprise only features
from the Open Source documentation:
- Encryption at Rest
- Workload Prioritization
- LDAP Authorization
- LDAP Authentication
- Audit
In addition, it removes most of the information about Incremental
Compaction Strategy (ICS), which is replaced with links to the
Enterprise documentation.
The changes above required additional updates introduced with this
commit:
- The links to Enterprise-only features are replaced with the
corresponding links in the Enterprise documentation.
- The redirections are added for the removed pages to be redirected to
the corresponding pages in the Enterprise documentation.
This commit must be reverted in the scylla-enterprise repository to
avoid deleting the Enterprise-only content from the Enterprise docs.
Closes#13123
This PR extends the description of using `nodetool removenode `to remove an unavailable node, as requested in https://github.com/scylladb/scylla-enterprise/issues/2338.
Closes#12410
* github.com:scylladb/scylladb:
docs: improve the warning and add a comment to update/remove the information in the future
doc: extend the information on removing an unavailable node
docs: extend the warning on the Remove a Node page
