The testcase uses an sstable whose mutation key and the generation are
owned by different shards. Due to this, when process_sstable_dir is
called, the sstable gets loaded into a different shard than the one that
was intended. This also means that the sstable and the sstable manager
end up in different shards.
The following patch will introduce a condition variable in sstables
manager which will be signalled from the sstables. If the sstable and
the sstable manager are in different shards, the signalling will cause
the testcase to fail in debug mode with this error : "Promise task was
set on shard x but made ready on shard y". So, fix it by supplying
appropriate generation number owned by the same shard which owns the
mutation key as well.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
The test sequence is
- create several sstables
- create deletion log for a sub-set of them
- partially unlink smaller sub-sub-set
- make sstable directory do the processing with g.c.
- check that the sstables loaded do NOT include the deleted ones
The .throw_on_missing_toc bit set additionally validates that the
directory doesn't contain garbage not attached to any other TOCs
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The wrapper just calls the test-only core write_memtable_to_sstable()
overload, tests can do it on their own.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test checks that
- for non-system keyspace datadir and its staging/ and upload/ subdirs
are created when the table is created _and_ that the directory is
re-populated on boot in case it was explicitly removed
- for system non-virtual tables it checks that the same directory layout
is created on boot
- for system virtual tables it checks that the directory layout doesn't
exist
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The logger is not thread safe, so a multithreaded test can concurrently
write into the log, yielding unreadable XMLs.
Example:
boost/sstable_directory_test: failed to parse XML output '/scylladir/testlog/x86_64/release/xml/boost.sstable_directory_test.sstable_directory_shared_sstables_reshard_correctly.3.xunit.xml': not well-formed (invalid token): line 1, column 1351
The critical (today's unprotected) section is in boost/test/utils/xml_printer.hpp:
```
inline std::ostream&
operator<<( custom_printer<cdata> const& p, const_string value )
{
*p << BOOST_TEST_L( "<![CDATA[" );
print_escaped_cdata( *p, value );
return *p << BOOST_TEST_L( "]]>" );
}
```
The problem is not restricted to xml, but the unreadable xml file caused
the test to fail when trying to parse it, to present a summary.
New thread-safe variants of BOOST_REQUIRE and BOOST_REQUIRE_EQUAL are
introduced to help multithreaded tests. We'll start patching tests of
sstable_directory_test that will call BOOST_REQUIRE* from multiple
threads. Later, we can expand its usage to other tests.
Fixes#15654.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#15655
Currently, mark_ready_for_writes is called too early,
after the first data dir is processed, then the next
datadir will hit an assert in `table::mark_ready_for_writes`.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Add a basic regression test that starts the cql test env
with multiple data directories.
It fails without the previous patch:
table: init_storage: create upload and staging subdirs on all datadirs
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
As was mentione in the previous patch, there are few places in tests
that put sstables in upload/ subdir and they really mean it. Those need
to use sstables manager/directory API directly (already) and specify the
state explicitly (this patch)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This is to replace full path sitting on this object eventually. For now
they have to co-exist, but state will be used to make_sstable()-s from
manager with its new API
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
for faster build times and clear inter-module dependencies, we
should not #includes headers not directly used. instead, we should
only #include the headers directly used by a certain compilation
unit.
in this change, the source files under "/compaction" directories
are checked using clangd, which identifies the cases where we have
an #include which is not directly used. all the #includes identified
by clangd are removed, except for "test/lib/scylla_test_case.hh"
as it brings some command line options used by scylla tests.
see also https://clangd.llvm.org/guides/include-cleaner#unused-include-warning
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14922
This reverts commit 562087beff.
The regressions introduced by the reverted change have been fixed.
So let's revert this revert to resurrect the
uuid_sstable_identifier_enabled support.
Fixes#10459
schema::get_sharder() does not use the correct sharder for
tablet-based tables. Code which is supposed to work with all kinds of
tables should obtain the sharder from erm::get_sharder().
This reverts commit d1dc579062, reversing
changes made to 3a73048bc9.
Said commit caused regressions in dtests. We need to investigate and fix
those, but in the meanwhile let's revert this to reduce the disruption
to our workflows.
Refs: #14283
the invalid sstable id is the NULL of a sstable identifier. with
this concept, it would be a lot simpler to find/track the greatest
generation. the complexity is hidden in the generation_type, which
compares the a) integer-based identifiers b) uuid-based identifiers
c) invalid identitifer in different ways.
so, in this change
* the default constructor generation_type is
now public.
* we don't check for empty generation anymore when loading
SSTables or enumerating them.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
before this change, we assume that generation is always integer based.
in order to enable the UUID-based generation identifier if the related
option is set, we should populate this option down to generation generator.
because we don't have access to the cluster features in some places where
a new generation is created, a new accessor exposing feature_service from
sstable manager is added.
Fixes#10459
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
In that level no io_priority_class-es exist. Instead, all the IO happens
in the context of current sched-group. File API no longer accepts prio
class argument (and makes io_intent arg mandatory to impls).
So the change consists of
- removing all usage of io_priority_class
- patching file_impl's inheritants to updated API
- priority manager goes away altogether
- IO bandwidth update is performed on respective sched group
- tune-up scylla-gdb.py io_queues command
The first change is huge and was made semi-autimatically by:
- grep io_priority_class | default_priority_class
- remove all calls, found methods' args and class' fields
Patching file_impl-s is smaller, but also mechanical:
- replace io_priority_class& argument with io_intent* one
- pass intent to lower file (if applicatble)
Dropping the priority manager is:
- git-rm .cc and .hh
- sed out all the #include-s
- fix configure.py and cmakefile
The scylla-gdb.py update is a bit hairry -- it needs to use task queues
list for IO classes names and shares, but to detect it should it checks
for the "commitlog" group is present.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13963
instead of using BOOST_REQUIRE() use, for instance
BOOST_REQUIRE_NE() and BOOST_REQUIRE_EQUAL() for better
error message when the test fails, as Boost::test would
print out the LHS and RHS of the comparison expression
if it fails.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14050
instead of assuming the integer-based generation id, let's use
the generation generator for creating a new generation id. this
helps us to improve the testing coverity once we migrate to the
UUID-based generation identifier.
this change uses generator to generate generations for
`make_sstable_for_all_shards()`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
always avoid using generation_type if possible. this helps us to
hide the underlying type of generation identifier, which could also
be a UUID in future.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
instead of assuming the integer-based generation id, let's use
the generation generator for creating a new generation id. this
helps us to improve the testing coverity once we migrate to the
UUID-based generation identifier.
this change uses generator to create generations for
`make_sstable_for_this_shard()`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
* replace generation_type::value() with generation_type::as_int()
* drop generation_value()
because we will switch over to UUID based generation identifier, the member
function or the free function generation_value() cannot fulfill the needs
anymore. so, in this change, they are consolidated and are replaced by
"as_int()", whose name is more specific, and will also work and won't be
misleading even after switching to UUID based generation identifier. as
`value()` would be confusing by then: it could be an integer or a UUID.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
There are two of them currently, both returning fs::path for sstable
components. One is static and can be dropped, callers are patched to use
the non-static one making the code tiny bit shorter.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This patch adds storage options lw-ptr to sstables_manager::make_sstable
and makes the storage instance creation depend on the options. For local
it just creates the filesystem storage instance, for S3 -- throws, but
next patch will fix that.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The class in question will need to know the table's storage it will need
to list sstables from. For that -- construct it with the storage options
taken from table.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
generation_for_sharded_test is not used by any of these sstable
tests, so let's drop it.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#13388
Use generation_type rather than generation_type::int_t
where possible and removed the deprecated
functions accepting the int_t.i
Ref #10459
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
It is possible to find no generation in an empty
table directory, and in he future, with uuid generations
it'd be possible to find no numeric generations in the
directory.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Convert all users to use sstables::generation_type::int_t.
Further patches will continue to convert most to
using sstables::generation_type instead so we can
abstract the value type.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Add a few goodies to sstable_test_env to extend
entry points with default params for make_sstable
and reusable_sst.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Tests should just generate the highest sstable version
available. There is no need to ontinue testing old versions,
in particular partially supported ones like "la".
Use also the default values for sstable::format_types, buffer_size,
etc. if there's no particular need to override them.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
The helping wrapper facilitates the usage of sharded<sstable_directory> for several test cases and the helper and its callers had deserved some cleanup over time.
Closes#12791
* github.com:scylladb/scylladb:
sstable_directory_test: Reindent and de-multiline
sstable_directory_test: Enlighten and rename sstable_from_existing_file
sstable_directory_test: Remove constant parallelizm parameter
Many tests using sstable directory wrapper have broken indentation with
previous patching. Fix it. No functional changes.
Also, while at it, convert multiline wrapper calls into one-line, after
previous patch these are short enough for that.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It used to be the sstable maker for sstable::test_env / cql_test_env,
now sstables for tests are made via sstables manager explicitly, so the
guy can be remaned to something more relevant to its current status.
Also, de-mark its constructors as explicit to make callers look shorter.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now it gets one from this-> but the method is becoming static one in
distributed_loader which only has it as an argument. That's not big deal
as the current IO class is going to be derived from current sched group,
so this extra arg will go away at all some day.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
We currently have two method families to generate partition keys:
* make_keys() in test/lib/simple_schema.hh
* token_generation_for_shard() in test/lib/sstable_utils.hh
Both work only for schemas with a single partition key column of `text` type and both generate keys of fixed size.
This is very restrictive and simplistic. Tests, which wanted anything more complicated than that had to rely on open-coded key generation.
Also, many tests started to rely on the simplistic nature of these keys, in particular two tests started failing because the new key generation method generated keys of varying size:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same size. This makes some sense in the case of the key count estimation test, but makes no sense at all to me in the case of the sstable run test.
Closes#12657
* github.com:scylladb/scylladb:
test/lib/sstable_utils: remove now unused token_generation_for_shard() and friends
test/lib/simple_schema: remove now unused make_keys() and friends
test: migrate to tests::generate_partition_key[s]()
test/lib/test_services: add table_for_tests::make_default_schema()
test/lib: add key_utils.hh
test/lib/random_schema.hh: value_generator: add min_size_in_bytes
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Use the newly introduced key generation facilities, instead of the the
old inflexible alternatives and hand-rolled code.
Most of the migrations are mechanic, but there are two tests that
were tricky to migrate:
* sstable_compaction_test.sstable_run_based_compaction_test
* sstable_mutation_test.test_key_count_estimation
These two tests seems to depend on generated keys all being of the same
size. This makes some sense in the case of the key count estimation
test, but makes no sense at all to me in the case of the sstable run
test.
Today's sstable_test_env starts with a default-configured db::config and, thus, sstables_manager. Test cases that run in this env always create a tempdir to store sstable files in on their own. Next patching makes sstable-manager and friends fully control the data-dir path in order to support object storage for sstables in a nice way, and this behavior of tests upsets this ongoing work.
Said that, this PR configures sstable_test_env with a tempdir and pins down the cases using it to stick to that directory, rather than to the custom one.
Closes#12641
* github.com:scylladb/scylladb:
test: Use tempdir from sstable_test_env
test: Add tmpdir to sstable test env
test: Keep db::config as unique pointer
The test cases in sstable_directory_test use a temporary directory that
differs from the one sstables manager starts over. Fix that.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This test uses two many-args helpers from table calss to create sstables
with desired parameters. The table API in question is not used by any
other code but these few places, to it's better to open-code it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The sstable::filename() is going to become private method. Lots of tests
call it, but tests do call a lot of other sstable private methods,
that's OK. Make the sstable::filename() yet another one of that kind in
advance.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Yet another continuation to previous patch -- IO error handlers
generator is also needed to create sstables.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Continuation of one-before-previous patch. In order to create sstable
without external lambda the directory code needs schema.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
