When the test fails with exception, keep the keyspace
intact for post-mortem analysis.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 0fd1b846fe)
Define create_new_test_keyspace that can be used in
cases we cannot automatically drop the newly created keyspace
due to e.g. loss of raft majority at the end of the test.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit f946302369)
Following patch will convert topology tests to use
new_test_keyspace and friends.
Some tests restart server and reset the driver connection
so we cannot use the original cql Session for
dropping the created keyspace in the `finally` block.
Pass the ManagerClient instead to get a new cql
session for dropping the keyspace.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 50ce0aaf1c)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Currently, flush throws no_such_column_family if a table is dropped. Skip the flush of dropped table instead.
Fixes: #16095.
Needs backport to 2025.1 and 6.2 as they contain the bug
- (cherry picked from commit 91b57e79f3)
- (cherry picked from commit c1618c7de5)
Parent PR: #23876Closesscylladb/scylladb#23905
* github.com:scylladb/scylladb:
test: test table drop during flush
replica: skip flush of dropped table
This is passed by reference to the constructor, but a copy is saved into
the _table_shared_data member. A reference to this member is passed down
to all memtable readers. Because of the copy, the memtable readers save
a reference to the memtable_list's member, which goes away together with
the memtable_list when the storage_group is destroyed.
This causes use-after-free when a storage group is destroyed while a
memtable read is still ongoing. The memtable reader keeps the memtable
alive, but its reference to the memtable_table_shared_data becomes
stale.
Fix by saving a reference in the memtable_list too, so memtable readers
receive a reference pointing to the original replica::table member,
which is stable accross tablet migrations and merges.
The copy was introduced by 2a76065e3d.
There was a copy even before this commit, but in the previous vnode-only
world this was fine -- there was one memtable_list per table and it was
around until the table itself was. In the tablet world, this is no
longer given, but the above commit didn't account for this.
A test is included, which reproduces the use-after-free on memtable
migration. The test is somewhat artificial in that the use-after-free
would be prevented by holding on to an ERM, but this is done
intentionaly to keep the test simple. Migration -- unlike merge where
this use-after-free was originally observed -- is easy to trigger from
unit tests.
Fixes: #23762Closesscylladb/scylladb#23984
(cherry picked from commit 0a9ca52cfd)
Closesscylladb/scylladb#24033
The test populates a table with 50k rows, creates a view on that table
and then compares the time spent in streaming vs. gossip scheduling
groups. It only takes 10s in dev mode on my machine, but is much slower
in debug mode in CI - building the view doesn't finish within 2 minutes.
The bigger the view to build, the more accurrate the measurement;
moreover, the test scenario isn't interesting enough to be worth running
it in debug mode as this should be covered by other tests. Therefore,
just skip this test in debug mode.
Fixes: scylladb/scylladb#23862Closesscylladb/scylladb#23866
(cherry picked from commit 3d73c79a72)
Closesscylladb/scylladb#23881
Currently, test_tablet_resize_revoked tries to trigger split revoke
by deleting some rows. This method isn't deterministic and so a test
is flaky.
Use error injection to trigger resize revoke.
Fixes: #22570.
Closesscylladb/scylladb#23966
(cherry picked from commit 1f4edd8683)
Closesscylladb/scylladb#23974
In case when dht::boot_strapper::get_boostrap_tokens fail to parse the
tokens, the topology coordinator handles the exception and schedules a
rollback. However, the current code tries to continue with the topology
coordinator logic even if an exception occurs, leaving boostrap_tokens
empty. This does not make sense and can actually cause issues,
specifically in prepare_and_broadcast_cdc_generation_data which
implicitly expect that the bootstrap_tokens of the first node in the
cluster will not be empty.
Fix this by adding the missing break.
Fixes: scylladb/scylladb#23897
From the code inspection alone it looks like 2025.1 and 6.2 have this problem, so marking for backport to both of them.
- (cherry picked from commit 66acaa1bf8)
- (cherry picked from commit 845cedea7f)
- (cherry picked from commit 670a69007e)
Parent PR: #23914Closesscylladb/scylladb#23949
* github.com:scylladb/scylladb:
test: cluster: add test_bad_initial_token
topology coordinator: do not proceed further on invalid boostrap tokens
cdc: add sanity check for generating an empty generation
Check whether a node is alive before making an rpc that gathers children
infos from the whole cluster in virtual_task::impl::get_children.
Fixes: https://github.com/scylladb/scylladb/issues/22514.
Needs backport to 2025.1 and 6.2 as they contain the bug.
- (cherry picked from commit 53e0f79947)
- (cherry picked from commit e178bd7847)
Parent PR: #23787Closesscylladb/scylladb#23943
* github.com:scylladb/scylladb:
test: add test for getting tasks children
tasks: check whether a node is alive before rpc
Adds a test which checks that rollback works properly in case when a bad
value of the initial_token function is provided.
(cherry picked from commit 670a69007e)
Fixes the following scenario:
1. Scale out adds new nodes to each rack
2. Table is created - all tablets are allocated to new nodes because they have low load
3. Rebalancing moves tablets from old nodes to new nodes - table balance for the new table is not fixed
We're wrong to try to equalize global load when allocating tablets,
and we should equalize per-table load instead, and let background load
balancing fix it in a fair way. It will add to the allocated storage
imbalance, but:
1. The table is initially empty, so doesn't impact actual storage imbalance.
2. It's more important to avoid overloading CPU on the nodes - imbalance hurts this aspect immediately.
3. If the table was created before imbalance was formed, we would end up in the same situation as in the problematic scenario after the patch.
4. It's the job of the load balancing to keep up with storage growing, and if it's not, scale out should kick in.
Before we have CPU-aware tablet allocation, and thus can prove we have
CPU capacity on the small nodes, we should respect per-table balance
as this is the way in which we achieve full CPU utilization.
Fixes#23631
Backport to 2025.1 because load imbalance is a serious problem in production.
- (cherry picked from commit d493a8d736)
- (cherry picked from commit 2597a7e980)
- (cherry picked from commit 1e407ab4d2)
Parent PR: #23708Closesscylladb/scylladb#23873
* github.com:scylladb/scylladb:
tablets: Equalize per-table balance when allocating tablets for a new table
load_sketch: Tolerate missing tablet_map when selecting for a given table
tests: tablets: Simplify tests by moving common code to topology_builder
Relying on a real-time clock like lowres_clock
can be flaky (in particular in debug mode).
Use manual_clock instead to harden the test against
timing issues.
Fixes#20322
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 32b7cab917)
Rather than a global function, accessing a thread-local `load_count`.
The thread-local load_count cannot be used when multiple test
cases run in parallel.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit b258f8cc69)
This test isn't about reading values from file,
but rather it's about the loading_cache.
Reading from the file can sometimes take longer than
the expected refresh times, causing flakiness (see #20322).
Rather than reading a string from a real file, just
sleep a random, short time, and co_return the string.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit d68829243f)
rather then macros.
This is a first cleanup step before adding a sleep function
parameter to support also manual_clock.
Also, add a call to BOOST_REQUIRE_EQUAL/BOOST_CHECK_EQUAL,
respectively, to make an error more visible in the test log
since those entry points print the offending values
when not equal.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit b509644972)
Fixes the following scenario:
1. Scale out adds new nodes to each rack
2. Table is created - all tablets are allocated to new nodes because they have low load
3. Rebalancing moves tablets from old nodes to new nodes - table balance for the new table is not fixed
We're wrong to try to equalize global load when allocating tablets,
and we should equalize per-table load instead, and let background load
balancing fix it in a fair way. It will add to the allocated storage
imbalance, but:
1. The table is initially empty, so doesn't impact actual storage imbalance.
2. It's more important to avoid overloading CPU on the nodes - imbalance hurts this aspect immediately.
3. If the table was created before imbalance was formed, we would end up in the same situation in the problematic scenario after the patch.
4. It's the job of the load balancing to keep up with storage growing, and if it's not, scale out should kick in.
Before we have CPU-aware tablet allocation, and thus can prove we have
CPU capacity on the small nodes, we should respect per-table balance
as this is the way in which we achieve full CPU utilization.
Fixes#23631
(cherry picked from commit 1e407ab4d2)
The query may fail also on a no_such_keyspace
exception, which generates the following cql error:
```
Error from server: code=2200 [Invalid query] message="Can\'t find a keyspace test_1745198244144_qoohq"
```
Extend the pytest.raises match expression to include
this error as well.
Fixes#23812
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#23875
(cherry picked from commit f279625f59)
Closesscylladb/scylladb#23887
The test `test_mv_write_to_dead_node` currently uses a timeout of 60
seconds for remove_node, after it was increased from 30 seconds to fix
scylladb/scylladb#22953. Apparently it is still too low, and it was
observed to fail in debug mode.
Normally remove_node uses a default timeout of TOPOLOGY_TIMEOUT = 1000
seconds, but the test requires a timeout which is shorter than 5
minutes, because it is a regression test for an issue where MV updates
hold topology changes for more than 5 minutes, and we want to verify in
the test that the topology change completes in less than 5 minutes.
To resolve the issue, we set the test to skip in debug mode, because the
remove node operation is unpredictably slow, and we increase the timeout
to 180 seconds which is hopefully enough time for remove_node in
non-debug modes, and still sufficient to satisfy the test requirements.
Fixesscylladb/scylladb#22530Closesscylladb/scylladb#23833
(cherry picked from commit 5c1d24f983)
Closesscylladb/scylladb#23874
Commit 14bf09f447 added a single-chunk layout to `managed_bytes`, which makes the overhead of `managed_bytes` smaller in the common case of a small buffer.
But there was a bug in it. In the copy constructor of `managed_bytes`, a copy of a single-chunk `managed_bytes` is made single-chunk too.
But this is wrong, because the source of the copy and the target of the copy might have different preferred max contiguous allocation sizes.
In particular, if a `managed_bytes` of size between 13 kiB and 128 kiB is copied from the standard allocator into LSA, the resulting `managed_bytes` is a single chunk which violates LSA's preferred allocation size. (And therefore is placed by LSA in the standard allocator).
In other words, since Scylla 6.0, cache and memtable cells between 13 kiB and 128 kiB are getting allocated in the standard allocator rather than inside LSA segments.
Consequences of the bug:
1. Effective memory consumption of an affected cell is rounded up to the nearest power of 2.
2. With a pathological-enough allocation pattern (for example, one which somehow ends up placing a single 16 kiB memtable-owned allocation in every aligned 128 kiB span), memtable flushing could theoretically deadlock, because the allocator might be too fragmented to let the memtable grow by another 128 kiB segment, while keeping the sum of all allocations small enough to avoid triggering a flush. (Such an allocation pattern probably wouldn't happen in practice though).
3. It triggers a bug in reclaim which results in spurious allocation failures despite ample evictable memory.
There is a path in the reclaimer procedure where we check whether reclamation succeeded by checking that the number of free LSA segments grew.
But in the presence of evictable non-LSA allocations, this is wrong because the reclaim might have met its target by evicting the non-LSA allocations, in which case memory is returned directly to the standard allocator, rather than to the pool of free segments.
If that happens, the reclaimer wrongly returns `reclaimed_nothing` to Seastar, which fails the allocation.
Refs (possibly fixes) https://github.com/scylladb/scylladb/issues/21072
Fixes https://github.com/scylladb/scylladb/issues/22941
Fixes https://github.com/scylladb/scylladb/issues/22389
Fixes https://github.com/scylladb/scylladb/issues/23781
This is a regression fix, should be backported to all affected releases.
- (cherry picked from commit 4e2f62143b)
- (cherry picked from commit 6c1889f65c)
Parent PR: #23782Closesscylladb/scylladb#23810
* github.com:scylladb/scylladb:
managed_bytes_test: add a reproducer for #23781
managed_bytes: in the copy constructor, respect the target preferred allocation size
Said method passes down its diff input to mutate_internal(), after some std::ranges massaging. Said massaging is destructive -- it moves items from the diff. If the output range is iterated-over multiple times, only the first time will see the actual output, further iterations will get an empty range.
When trace-level logging is enabled, this is exactly what happens: mutate_internal() iterates over the range multiple times, first to log its content, then to pass it down the stack. This ends up resulting in an empty range being pased down and write handlers being created with nullopt optionals.
Fixes: scylladb/scylladb#21907Fixes: scylladb/scylladb#21714
A follow-up stability fix for the test is also included.
Fixes: https://github.com/scylladb/scylladb/issues/23513
Fixes: https://github.com/scylladb/scylladb/issues/23512
Based on code-inspection, all versions are vulnerable, although <=6.2 use boost::ranges, not std::ranges.
- (cherry picked from commit 7150442f6a)
Parent PR: #21910Closesscylladb/scylladb#23791
* github.com:scylladb/scylladb:
test/cluster/test_read_repair.py: increase read request timeout
service/storage_proxy: schedule_repair(): materialize the range into a vector
Currently, when we rebuild a tablet, we stream data from all
replicas. This creates a lot of redundancy, wastes bandwidth
and CPU resources.
In this series, we split the streaming stage of tablet rebuild into
two phases: first we stream tablet's data from only one replica
and then repair the tablet.
Fixes: https://github.com/scylladb/scylladb/issues/17174.
Needs backport to 2025.1 to prevent out of space during streaming
- (cherry picked from commit b80e957a40)
- (cherry picked from commit ed7b8bb787)
- (cherry picked from commit 5d6041617b)
- (cherry picked from commit 4a847df55c)
- (cherry picked from commit eb17af6143)
- (cherry picked from commit acd32b24d3)
- (cherry picked from commit 372b562f5e)
Parent PR: #23187Closesscylladb/scylladb#23682
* github.com:scylladb/scylladb:
test: add test for rebuild with repair
locator: service: move to rebuild_v2 transition if cluster is upgraded
locator: service: add transition to rebuild_repair stage for rebuild_v2
locator: service: add rebuild_repair tablet transition stage
locator: add maybe_get_primary_replica
locator: service: add rebuild_v2 tablet transition kind
gms: add REPAIR_BASED_TABLET_REBUILD cluster feature
This test enables trace-level logging for the mutation_data logger,
which seems to be too much in debug mode and the test read times out.
Increase timeout to 1minute to avoid this.
Fixes: #23513Closesscylladb/scylladb#23558
(cherry picked from commit 7bbfa5293f)
This series adds support for reporting consumed capacity in BatchGetItem operations in Alternator.
It includes changes to the RCU accounting logic, exposing internal functionality to support batch-specific behavior, and adds corresponding tests for both simple and complex use cases involving multiple tables and consistency modes.
Need backporting to 2025.1, as RCU and WCU are not fully supported
Fixes#23690
- (cherry picked from commit 0eabf8b388)
- (cherry picked from commit 88095919d0)
- (cherry picked from commit 3acde5f904)
Parent PR: #23691Closesscylladb/scylladb#23790
* github.com:scylladb/scylladb:
test_returnconsumedcapacity.py: test RCU for batch get item
alternator/executor: Add RCU support for batch get items
alternator/consumed_capacity: make functionality public
Said method passes down its `diff` input to `mutate_internal()`, after
some std::ranges massaging. Said massaging is destructive -- it moves
items from the diff. If the output range is iterated-over multiple
times, only the first time will see the actual output, further
iterations will get an empty range.
When trace-level logging is enabled, this is exactly what happens:
`mutate_internal()` iterates over the range multiple times, first to log
its content, then to pass it down the stack. This ends up resulting in
a range with moved-from elements being pased down and consequently write
handlers being created with nullopt mutations.
Make the range re-entrant by materializing it into a vector before
passing it to `mutate_internal()`.
Fixes: scylladb/scylladb#21907Fixes: scylladb/scylladb#21714Closesscylladb/scylladb#21910
(cherry picked from commit 7150442f6a)
This patch adds tests for consumed capacity in batch get item. It tests
both the simple case and the multi-item, multi-table case that combines
consistent and non-consistent reads.
(cherry picked from commit 3acde5f904)
Adds a sibling type to encrypted file, a data_sink, that
will write a data stream in the same block format as a file
object would. Including end padding.
For making encrypted data sink writing less cumbersome.
(cherry picked from commit 9ac9813c62)
Fixes#23225Fixes#23185
Moved wrapping component files/sinks to storage provider. Also ensures
to wrap data_sinks as well as actual files. This ensures that we actually
write encryption if active.
(cherry picked from commit e02be77af7)
This matches the signature of call sites. Since the only "real"
extension to actually make a marker in the sstable will do so in
the scylla component, which is writable even in a const sstable,
this is ok.
(cherry picked from commit e100af5280)
Mainly to add a somewhat functional file-impl wrapping
a data_sink. This can implement a rudimentary, write-only,
file based on any output sink.
For testing, and because they fit there, place memory
sink and source types there as well.
(cherry picked from commit 98a6d0f79c)
