Following patch will convert topology tests to use
new_test_keyspace and friends.
Some tests restart server and reset the driver connection
so we cannot use the original cql Session for
dropping the created keyspace in the `finally` block.
Pass the ManagerClient instead to get a new cql
session for dropping the keyspace.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Currently, we can not have more than one global topology operation at the same time. This means that we can not have concurrent truncate operations because truncate is implemented as a global topology operation.
Truncate excludes with other topology operations, and has to wait for those to complete before truncate starts executing. This can lead to truncate timeouts. In these cases the client retries the truncate operation, which will check for ongoing global topology operations, and will fail with
an "Another global topology request is ongoing, please retry." error.
This can be avoided by truncate checking if the ongoing global topology operation is a truncate running for the same table who's truncate has just been requested again. In this case, we can wait for the ongoing truncate to complete instead of immediately failing the operation, and
provide a better user experience.
This is an improvement, backport is not needed.
Closes#22166Closesscylladb/scylladb#22371
* github.com:scylladb/scylladb:
test: add test for re-cycling ongoing truncate operations
truncate: add additional logging and improve error message during truncate
storage_proxy: wait on already running truncate for the same table
storage_proxy: allow multiple truncate table fibers per shard
Refs #22628
Adds exception handler + cleanup for the case where we have a bad config/env vars (hint minio) or similar, such that we fail with exception during setting up the EAR context. In a normal startup, this is ok. We will report the exception, and the do a exit(1).
In tests however, we don't and active context will instead be freed quite proper, in which case we need to call stop to ensure we don't crash on shared pointer destruction on wrong shard. Doing so will hide the real issue from whomever runs the test.
Adds some verbosity to track issues with the network proxy used to test EAR connector difficulties. Also adds an earlier close in input stream to help network usage.
Note: This is a diagnostic helper. Still cannot repro the issue above.
Closesscylladb/scylladb#22810
* github.com:scylladb/scylladb:
gcp/aws kms: Promote service_error to recoverable + use malformed_response_error
encryption_at_rest_test: Add verbosity + earlier stream close to proxy
encryption: Add exception handler to context init (for tests)
The config variable `components_memory_reclaim_threshold` limits the
memory available to the sstable bloom filters. Any change to its value
is not immediately propagated to the sstable manager, despite it being
a LiveUpdate variable. The updated value takes effect only when a new
sstable is created or deleted.
This PR first refactors the reclaim and reload logic into a single
background fiber. It then updates the sstable manager to subscribe to
changes in the `components_memory_reclaim_threshold` configuration value
and immediately triggers the reclaim/reload fiber when a change is
detected.
Fixes#21947
This is an improvement and does not need to be backported.
Closesscylladb/scylladb#22725
* github.com:scylladb/scylladb:
sstables_manager: trigger reclaim/reload on `components_memory_reclaim_threshold` update
sstables_manager: maybe_reclaim_components: yield between iterations
sstables_manager: rename `increment_total_reclaimable_memory_and_maybe_reclaim()`
sstables_manager: move reclaim logic into `components_reclaim_reload_fiber()`
sstables_manager: rename `_sstable_deleted_event` condition variable
sstables_manager: rename `components_reloader_fiber()`
sstables_manager: fix `maybe_reclaim_components()` indentation
sstables_manager: reclaim components memory until usage falls below threshold
sstables_manager: introduce `get_components_memory_reclaim_threshold()`
sstables_manager: extract `maybe_reclaim_components()`
sstables_manager: fix `maybe_reload_components()` indentation
sstables_manager: extract out `maybe_reload_components()`
The config variable `components_memory_reclaim_threshold` limits the
memory available to the sstable bloom filters. Any change to its value
is not immediately propagated to the sstable manager, despite it being
a LiveUpdate variable. The updated value takes effect only when a new
sstable is created or deleted.
This patch updates the sstable manager to subscribe to any changes in
the above mentioned config value and immediately trigger the
reclaim/reload fiber when a change occurs. Also, adds a testcase to
verify the fix.
Fixes#21947
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Refs #22628
Adds some verbosity to track issues with the network proxy used to test
EAR connector difficulties. Also adds an earlier close in input stream
to help network usage.
Note: This is a diagnostic helper. Still cannot repro the issue above.
This patch adds to the fetch_scylla.py script, used by the "--release"
option of test/{cqlpy,alternator}/run, the ability to download the new
2025.1 releases.
In the new single-stream releases, the number looks like the old
Scylla Enterprise releases, but the location of the artifacts in the
S3 bucket look like the old open-source releases (without the word
"-enterprise" in the paths). So this patch introduces a new "if"
for the (major >= 2025) case.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#22778
Both, repair and streaming depend on view builder, but since the builder is started too late, both keep sharded<> reference on it and apply `if (view_builder.local_is_initialized())` safety checks.
However, view builder can do its sharded start much earlier, there's currently nothing that prevents it from doing so. This PR moves view builder start up together with some other of its dependencies, and relaxes the way repair and streaming use their view-builder references, in particular -- removes those ugly initialization checks.
refs: scylladb/scylladb#2737Closesscylladb/scylladb#22676
* github.com:scylladb/scylladb:
streaming: Relax streaming::make_streamig_consumer() view builder arg
streaming: Keep non-sharded view_builder dependency reference
streaming: Remove view_builder.local_is_initialized() checks
repair: Keep non-sharded view_builder dependency reference
repair: Remove view_builder.local_is_initialized() checks
main: Start sharded<view_builder> earlier
test/cql_env: Move stream manager start lower
Currently, the tablet repair scheduler repairs all replicas of a tablet. It does not support hosts or DCs selection. It should be enough for most cases. However, users might still want to limit the repair to certain hosts or DCs in production. https://github.com/scylladb/scylladb/pull/21985 added the preparation work to add the config options for the selection. This patch adds the hosts or DCs selection support.
Fixes https://github.com/scylladb/scylladb/issues/22417
New feature. No backport is needed.
Closesscylladb/scylladb#22621
* github.com:scylladb/scylladb:
test: add test to check dcs and hosts repair filter
test: add repair dc selection to test_tablet_metadata_persistence
repair: Introduce Host and DC filter support
docs: locator: update the docs and formatter of tablet_task_info
result_set_row is a heavyweight object containing multiple cell types:
regular columns, partition keys, and static values. To prevent expensive
accidental copies, delete the copy constructor and replace it with:
1. A move constructor for efficient vector reallocation
2. An explicit copy() method when copies are actually needed
This change reduces overhead in some non-hot paths by eliminating implicit
deep copies. Please note, previously, in `create_view_from_mutation()`,
we kept a copy of `result_set_row`, and then reused `table_rs` for
holding the mutation for `scylla_tables`. Because we don't copy
the `result_set_row` in this change, in order to avoid invalidating
the `row` after reusing `table_rs` in the outer scope, we define a
new `table_rs` shadowing the one in the out scope.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22741
The existing test measures latencies of object GET-s. That's nice (though incomplete), but we want to measure upload performance. Here it is.
refs: #22460Closesscylladb/scylladb#22480
* github.com:scylladb/scylladb:
test/perf/s3: Add --part-size-mb option for upload test
test/perf/s3: Add uploading test
test/perf/s3: Some renames not to be download-centric
test/perf/s3: Make object/file name configurable
test/perf/s3: Configure maximum number of sockets
test/perf/s3: Remove parallelizm
s3/client: Make http client connections limit configurable
Given two sets of equivalent types, return the set
intersection.
This is a generic function which adapts to the actual
input type.
A unit test is added.
Closesscylladb/scylladb#22763
this PR is propper(pythonic) chance of commit 288a47f815
Creating an own folder used to be needed for two reasons:
we want a separate test suite, with its own settings
we want to structure tests, e.g. tablets, raft, schema, gossip.
We've been creating many folders recently. However, test suite
infrastructure is expensive in test.py - each suite has its own
pool of servers, concurrency settings and so on.
Make it possible to structure tests without too many suites,
by supporting subfolders within a suite.
As an example, this PR move mv tests into a separate folder
custom test.py lookup also works.
tests can be run as:
1. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv/tablets/test_mv_tablets_empty_ip
2. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv/tablets
3. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv
Fixes https://github.com/scylladb/scylladb/issues/20570Closesscylladb/scylladb#22816
* github.com:scylladb/scylladb:
test.py: move mv tests into a separate folder
test.py: suport subfolders
Table updates that try to enable stream (while changing or not the
StreamViewType) on a table that already has the stream enabled
will result in ValidationError.
Table updates that try to disable stream on a table that does not
have the stream enabled will result in ValidationError.
Add two tests to verify the above.
Mark the test for changing the existing stream's StreamViewType
not to xfail.
Fixesscylladb/scylladb#6939Closesscylladb/scylladb#22827
Fixes#22688
If we set a dc rf to zero, the options map will still retain a dc=0 entry.
If this dc is decommissioned, any further alters of keyspace will fail,
because the union of new/old options will now contained an unknown keyword.
Change alter ks options processing to simply remove any dc with rf=0 on
alter, and treat this as an implicit dc=0 in nw-topo strategy.
This means we change the reallocate_tablets routine to not rely on
the strategy objects dc mapping, but the full replica topology info
for dc:s to consider for reallocation. Since we verify the input
on attribute processing, the amount of rf/tablets moved should still
be legal.
v2:
* Update docs as well.
v3:
* Simplify dc processing
* Reintroduce options empty check, but do early in ks_prop_defs
* Clean up unit test some
Closesscylladb/scylladb#22693
The test
topology_custom/test_alternator::test_localnodes_broadcast_rpc_address
sets up nodes with a silly "broadcast rpc address" and checks that
Alternator's "/localnodes" requests returns it correctly.
The problem is that although we don't use CQL in this test, the test
framework does open a CQL connection when the test starts, and closes
it when it ends. It turns out that when we set a silly "broadcast RPC
address", the driver tends to try to connect to it when shutting down,
I'm not even sure why. But the choice of the silly address was 1.2.3.4
is unfortunate, because this IP address is actually routable - and
the driver hangs until it times out (in practice, in a bit over two
minutes). This trivial patch changes 1.2.3.4 to 127.0.0.0 - and equally
silly address but one to which connections fail immediately.
Before this patch, the test often takes more than 2 minutes to finish
on my laptop, after this patch, it always finishes in 4-5 seconds.
Fixes#22744
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#22746
The code currently assumes that a session has both sender and receiver
streams, but it is possible to have just one or the other.
Change the test to include this scenario and remove this assumption from
the code.
Fixes: #22770Closesscylladb/scylladb#22771
This commit eliminates unused boost header includes from the tree.
Removing these unnecessary includes reduces dependencies on the
external Boost.Adapters library, leading to faster compile times
and a slightly cleaner codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22857
In a rolling upgrade, nodes that weren't upgraded yet will not recognize
the new tablet_resize_finalization state, that serves both split and
merges, leading to a crash. To fix that, coordinator will pick the
old tablet_split_finalization state for serving split finalization,
until the cluster agrees on merge, so it can start using the new
generic state for resize finalization introduced in merge series.
Regression was introduced in e00798f.
Fixes#22840.
Reported-by: Tomasz Grabiec <tgrabiec@scylladb.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#22845
The script fetch_scylla.py is used by the "--release" option of
test/cqlpy/run and test/alternator/run to fetch a given release of
Scylla. The release is fetched from S3, and the script assumed that the
user properly set up $HOME/.aws/config and $HOME/.aws/credentials
to determine the source of that download and the credentials to do this.
But this is unnecessary - Scylla's "downloads.scylladb.com" bucket
actually allows **anonymous** downloads, and this is what we should use.
After this patch, fetch_scylla.py (and the "--release" option of the
run scripts) work correctly even for a user that doesn't have $HOME/.aws
set up at all.
This fix is especially important to new developers, who might not even
have AWS credentials to put into these files.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#22773
The view_builder service is needed by repair service, but is started
after it. It's OK in a sense that repair service holds a sharded
reference on it and checks whether local_is_initialized() before using
it, which is not nice.
Fortunately, starting sharded view buidler can be done early enough,
because most of its dependencies would be already started by that time.
Two exceptions are -- view_update_generator and
system_distributed_keyspace. Both can be moved up too with the same
justification.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This is to keep it in-sync with main code, where stream manager is
started after storage_proxy's and query_processor's remotes. This
doesn't change nothing for now, but next patches will move other
services around main/cql_test_env and early start of stream manager in
cql_test_env will be problematic.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Renamed the aboved mentioned method to `increment_total_reclaimable_memory()`
as it doesn't directly reclaim memory anymore.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Move the sstable reclaim logic into `components_reclaim_reload_fiber()`
in preparation for the fix for #21947. This also simplifies the overall
reclaim/reload logic by preventing multiple fibers from attempting to
reclaim/reload component memory concurrently.
Also, update the existing test cases to adapt to this change.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Test now uses default internal part size, but for performance
comparisons its good to make it configurable.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test picks up a file and uploads it into the bucket, then prints the
time it took and uploading speed. For now it's enough, with existing S3
latencies more timing details can be obtained by turning on trace
logging on s3 logger.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now this test is all about reading objects. Rename some bits in it so
that they can be re-used by future uploading test as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now the download test first creates a temporary object and then reads
data from it. It's good to have an option to download pre-existing file.
This option will also be used for uploading test (next patches)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Add the --sockets NR option that limits the number of sockets the
underlying http client is configured to have.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test spawns several fibers that read the same file in parallel.
There's not much point in it, just makes the code harder to maintain.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The timeout of 10 seconds is too small for CI.
I didn't mean to make it so short, it was an accident.
Fix that by changing the timeout to 10 minutes.
Fixesscylladb/scylladb#22832Closesscylladb/scylladb#22836
test_complex_null_values is currently flaky, causing many failures
in CI. The reason for the failures is unclear, and a fix might not
be simple, so because UDFs are experimental, for now let's skip
this test until the corresponding issue is fixed.
Refs scylladb/scylladb#22799Closesscylladb/scylladb#22818
Now that we support suite subfolders,
As an example, this commit move mv tests into a separate folder
custom test.py lookup also works.
tests can be run as:
1. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv/tablets/test_mv_tablets_empty_ip
2. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv/tablets
3. ./tools/toolchain/dbuild ./test.py --no-gather-metrics --mode=dev topology_custom/mv
Said method passes down its `diff` input to `mutate_internal()`, after
some std::ranges massaging. Said massaging is destructive -- it moves
items from the diff. If the output range is iterated-over multiple
times, only the first time will see the actual output, further
iterations will get an empty range.
When trace-level logging is enabled, this is exactly what happens:
`mutate_internal()` iterates over the range multiple times, first to log
its content, then to pass it down the stack. This ends up resulting in
a range with moved-from elements being pased down and consequently write
handlers being created with nullopt mutations.
Make the range re-entrant by materializing it into a vector before
passing it to `mutate_internal()`.
Fixes: scylladb/scylladb#21907Fixes: scylladb/scylladb#21714Closesscylladb/scylladb#21910
Oversized materialized view and index names are rejected;
Materialized view names with invalid symbols are rejected.
fixes: #20755Closesscylladb/scylladb#21746
Replace boost::copy() with the standard library's std::ranges::copy()
to reduce external dependencies and simplify the codebase. This change
eliminates the requirement for boost::range and makes the implementation
more maintainable.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22789
Set true to wait for the repair to complete. Set false to skip waiting
for the repair to complete. When the option is not provided, it defaults
to false.
It is useful for management tool that wants the api to be async.
Fixes#22418Closesscylladb/scylladb#22436
Developers are expected to run new cqlpy tests against Cassandra - to
verify that the new test itself is correct. Usually there is no need
to run the entire cqlpy test suite against Cassandra, but when users do
this, it isn't confidence-inspiring to see hundreds of tests failing.
In this patch I fix many but not all of these failures.
Refs #11690 (which will remain open until we fix all the failures on
Cassandra)
* Fixed the "compact_storage" fixture recently introduced to enable the
deprecated feature in Scylla for the tests. This fixture was broken on
Cassandra and caused all compact-storage related tests to fail
on Cassandra.
* Marked all tests in test_tombstone_limit.py as scylla_only - as they
check the Scylla-only query_tombstone_page_limit configuration option.
* Marked all tests in test_service_level_api.py as scylla_only - as they
check the Scylla-only service levels feature.
* Marked a test specific to the Scylla-only IncrementalCompactionStrategy
as scylla_only. Some tests mix STCS and ICS testing in one test - this
is a mistake and isn't fixed in this patch.
* Various tests in test_tablets.py forgot to use skip_without_tablets
to skip them on Cassandra or older Scylla that doesn't have the
tablets feature.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
x
Closesscylladb/scylladb#22561
Use host_id in a children list of a task in task manager to indicate
a node on which the child was created.
Move TASKS_CHILDREN_REQUEST to IDL. Send it by host_id.
Fixes: https://github.com/scylladb/scylladb/issues/22284.
Ip to host_id transition; backport isn't needed.
Closesscylladb/scylladb#22487
* github.com:scylladb/scylladb:
tasks: drop task_manager::config::broadcast_address as it's unused
tasks: replace ip with host_id in task_identity
api: task_manager: pass gossiper to api::set_task_manager
tasks: keep host_id in task_manager
tasks: move tasks_get_children to IDL
In this series we implement the UpdateTable operation to add a GSI to an existing table, or remove a GSI from a table. As the individual commit messages will explained, this required changing how Alternator stores materialized view keys - instead of insisting that these key must be real columns (that is **not** the case when adding a GSI to an existing table), the materialized view can now take as its key any Alternator attribute serialized inside the ":attrs" map holding all non-key attributes. Fixes#11567.
We also fix the IndexStatus and Backfilling attributes returned by DescribeTable - as DynamoDB API users use this API to discover when a newly added GSI completed its "backfilling" (what we call "view building") stage. Fixes#11471.
This series should not be backported lightly - it's a new feature and required fairly large and intrusive changes that can introduce bugs to use cases that don't even use Alternator or its UpdateTable operations - every user of CQL materialized views or secondary indexes, as well as Alternator GSI or LSI, will use modified code. **It should be backported to 2025.1**, though - this version was actually branched long after this PR was sent, and it provides a feature that was promised for 2025.1.
Closesscylladb/scylladb#21989
* github.com:scylladb/scylladb:
alternator: fix view build on oversized GSI key attribute
mv: clean up do_delete_old_entry
test/alternator: unflake test for IndexStatus
test/alternator: work around unrelated bug causing test flakiness
docs/alternator: adding a GSI is no longer an unimplemented feature
test/alternator: remove xfail from all tests for issue 11567
alternator: overhaul implementation of GSIs and support UpdateTable
mv: support regular_column_transformation key columns in view
alternator: add new materialized-view computed column for item in map
build: in cmake build, schema needs alternator
build: build tests with Alternator
alternator: add function serialized_value_if_type()
mv: introduce regular_column_transformation, a new type of computed column
alternator: add IndexStatus/Backfilling in DescribeTable
alternator: add "LimitExceededException" error type
docs/alternator: document two more unimplemented Alternator features
We are supposed to be loading the most recent RPC compression dictionary
on startup, but we forgot to port the relevant piece of logic during
the source-available port. This causes a restarted node not to use the
dictionary for RPC compression until the next dictionary update.
Fix that.
Fixesscylladb/scylladb#22738
This is more of a bugfix than an improvement, so it should be backported to 2025.1.
Closesscylladb/scylladb#22739
* github.com:scylladb/scylladb:
test_rpc_compression.py: test the dictionaries are loaded on startup
raft/group0_state_machine: load current RPC compression dict on startup
