We were considering the token ranges in the size_estimates system
table to be inclusive, which is incorrect and incompatible with
Cassandra.
While we ignore the inclusiveness of the partition_range bounds when
selecting sstables, we do take it into account in
estimated_keys_for_range(). We would thus select the correct sstables,
but could over-estimate the range size nonetheless.
Tests: virtual_reader_test(release)
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20180709115919.5106-1-duarte@scylladb.com>
buffer_size() exposes the collective size of the external memory
consumed by the mutattion-fragments in the flat reader's buffer. This
provides a basis to build basic memory accounting on. Altought this is
not the entire memory consumption of any given reader it is the most
volatile component and usually by far the largest one too.
In the last patch, we enabled per-request timeouts, we enable timeouts
in fill_buffer. There are many places, though, in which we
fast_forward_to before we fill_buffer, so in order to make that
effective we need to propagate the timeouts to fast_forward_to as well.
In the same way as fill_buffer, we make the argument optional wherever
possible in the high level callers, making them mandatory in the
implementations.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
As part of the work to enable per-request timeouts, we enable timeouts
in fill_buffer.
The argument is made optional at the main classes, but mandatory in all
the ::impl versions. This way we'll make sure we didn't forget anything.
At this point we're still mostly passing that information around and
don't have any entity that will act on those timeouts. In the next patch
we will wire that up.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
The call to std::ref() is not namespace-qualified, and so can conflict
with seastar::ref().
Fix by naming std::ref() explicitly.
Message-Id: <20171004155250.4960-1-avi@scylladb.com>
In commit c63e88d556, support was added for
fast_forward_to() in data_consume_rows(). Because an input stream's end
cannot be changed after creation, that patch ignores the specified end
byte, and uses the end of file as the end position of the stream.
As result of this, even when we want to read a specific byte range (e.g.,
in the repair code to checksum the partitions in a given range), the code
reads an entire 128K buffer around the end byte, or significantly more, with
read-ahead enabled. This causes repair to do more than 10 times the amount
of I/O it really has to do in the checksumming phase (which in the current
implementation, reads small ranges of partitions at a time).
This patch has two levels:
1. In the lower level, sstable::data_consume_rows(), which reads all
partitions in a given disk byte range, now gets another byte position,
"last_end". That can be the range's end, the end of the file, or anything
in between the two. It opens the disk stream until last_end, which means
1. we will never read-ahead beyond last_end, and 2. fast_fordward_to() is
not allowed beyond last_end.
2. In the upper level, we add to the various layers of sstable readers,
mutation readers, etc., a boolean flag mutation_reader::forwarding, which
says whether fast_forward_to() is allowed on the stream of mutations to
move the stream to a different partition range.
Note that this flag is separate from the existing boolean flag
streamed_mutation::fowarding - that one talks about skipping inside a
single partition, while the flag we are adding is about switching the
partition range being read. Most of the functions that previously
accepted streamed_mutation::forwarding now accept *also* the option
mutation_reader::forwarding. The exception are functions which are known
to read only a single partition, and not support fast_forward_to() a
different partition range.
We note that if mutation_reader::forwarding::no is requested, and
fast_forward_to() is forbidden, there is no point in reading anything
beyond the range's end, so data_consume_rows() is called with last_end as
the range's end. But if forwarding::yes is requested, we use the end of the
file as last_end, exactly like the code before this patch did.
Importantly, we note that the repair's partition reading code,
column_family::make_streaming_reader, uses mutation_reader::forwarding::no,
while the other existing reading code will use the default forwarding::yes.
In the future, we can further optimize the amount of bytes read from disk
by replacing forwarding::yes by an actual last partition that may ever be
read, and use its byte position as the last_end passed to data_consume_rows.
But we don't do this yet, and it's not a regression from the existing code,
which also opened the file input stream until the end of the file, and not
until the end of the range query. Moreover, such an improvement will not
improve of anything if the overall range is always very large, in which
case not over-reading at its end will not improve performance.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20170619152629.11703-1-nyh@scylladb.com>
This reverts commit 317d7fc253 (and also the
related 2c57ab84b2). It causes crashes
during range scans, reported by Gleb:
"To reproduce I run SELECT * FROM keyspace1.standard1; on typical c-s
dataset and 3 node cluster.
Backtrace:
at /home/gleb/work/seastar/seastar/core/apply.hh:36
rvalue=<unknown type in /home/gleb/work/seastar/build/release/scylla, CU 0x54cf307, DIE 0x55ebf2a>) at /home/gleb/work/seastar/seastar/core/do_with.hh:57
range=std::vector of length 6, capacity 8 = {...}) at /home/gleb/work/seastar/seastar/core/future-util.hh:142
at ./seastar/core/future.hh:890
at /home/gleb/work/seastar/seastar/core/future-util.hh:119
at /home/gleb/work/seastar/seastar/core/future-util.hh:142
In commit c63e88d556, support was added for
fast_forward_to() in data_consume_rows(). Because an input stream's end
cannot be changed after creation, that patch ignores the specified end
byte, and uses the end of file as the end position of the stream.
As result of this, even when we want to read a specific byte range (e.g.,
in the repair code to checksum the partitions in a given range), the code
reads an entire 128K buffer around the end byte, or significantly more, with
read-ahead enabled. This causes repair to do more than 10 times the amount
of I/O it really has to do in the checksumming phase (which in the current
implementation, reads small ranges of partitions at a time).
This patch has two levels:
1. In the lower level, sstable::data_consume_rows(), which reads all
partitions in a given disk byte range, now gets another byte position,
"last_end". That can be the range's end, the end of the file, or anything
in between the two. It opens the disk stream until last_end, which means
1. we will never read-ahead beyond last_end, and 2. fast_fordward_to() is
not allowed beyond last_end.
2. In the upper level, we add to the various layers of sstable readers,
mutation readers, etc., a boolean flag mutation_reader::forwarding, which
says whether fast_forward_to() is allowed on the stream of mutations to
move the stream to a different partition range.
Note that this flag is separate from the existing boolean flag
streamed_mutation::fowarding - that one talks about skipping inside a
single partition, while the flag we are adding is about switching the
partition range being read. Most of the functions that previously
accepted streamed_mutation::forwarding now accept *also* the option
mutation_reader::forwarding. The exception are functions which are known
to read only a single partition, and not support fast_forward_to() a
different partition range.
We note that if mutation_reader::forwarding::no is requested, and
fast_forward_to() is forbidden, there is no point in reading anything
beyond the range's end, so data_consume_rows() is called with last_end as
the range's end. But if forwarding::yes is requested, we use the end of the
file as last_end, exactly like the code before this patch did.
Importantly, we note that the repair's partition reading code,
column_family::make_streaming_reader, uses mutation_reader::forwarding::no,
while the other existing reading code will use the default forwarding::yes.
In the future, we can further optimize the amount of bytes read from disk
by replacing forwarding::yes by an actual last partition that may ever be
read, and use its byte position as the last_end passed to data_consume_rows.
But we don't do this yet, and it's not a regression from the existing code,
which also opened the file input stream until the end of the file, and not
until the end of the range query. Moreover, such an improvement will not
improve of anything if the overall range is always very large, in which
case not over-reading at its end will not improve performance.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20170614072122.13473-1-nyh@scylladb.com>
This patch add a virtual mutation_reader so that queries
to the size_estimates system table are handled by the engine
without needing to perform any IO.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
