To fix a race between split and repair here c1de4859d8, a new sstable
generated during streaming can be split before being attached to the sstable
set. That's to prevent an unsplit sstable from reaching the set after the
tablet map is resized.
So we can think this split is an extension of the sstable writer. A failure
during split means the new sstable won't be added. Also, the duration of split
is also adding to the time erm is held. For example, repair writer will only
release its erm once the split sstable is added into the set.
This single-sstable split is going through run_custom_job(), which serializes
with other maintenance tasks. That was a terrible decision, since the split may
have to wait for ongoing maintenance task to finish, which means holding erm
for longer. Additionally, if split monitor decides to run split on the entire
compaction group, it can cause single-sstable split to be aborted since the
former wants to select all sstables, propagating a failure to the streaming
writer.
That results in new sstable being leaked and may cause problems on restart,
since the underlying tablet may have moved elsewhere or multiple splits may
have happened. We have some fragility today in cleaning up leaked sstables on
streaming failure, but this single-sstable split made it worse since the
failure can happen during normal operation, when there's e.g. no I/O error.
It makes sense to kill run_custom_job() usage, since the single-sstable split
is offline and an extension of sstable writing, therefore it makes no sense to
serialize with maintenance tasks. It must also inherit the sched group of the
process writing the new sstable. The inheritance happens today, but is fragile.
Fixes#20626.
(cherry picked from commit 999f1f1318)
(cherry picked from commit 38ce2c605d)
Refs #20737Closesscylladb/scylladb#20802
* github.com:scylladb/scylladb:
tablet: Fix single-sstable split when attaching new unsplit sstables
replica: Fix tablet split execute after restart
The testcase is flaky due to a known python driver issue:
https://github.com/scylladb/python-driver/issues/317.
This issue causes the `CREATE KEYSPACE` statement to be sometimes
executed twice in a row, and the 2nd CREATE statement causes the test to
fail.
In order to work around it, it's enough to add `if not exists` when
creating a ks.
Fixes: #21034
Needs to be backported to all 6.x branches, as the PR introducing this flakiness is backported to every 6.x branch.
(cherry picked from commit 3969ffb39f)
Closesscylladb/scylladb#21106
ALTERing tablets-enabled KEYSPACES (KS) didn't account for materialized
views (MV), and only produced tablets mutations changing tables.
With this patch we're producing tablets mutations for both tables and
MVs, hence when e.g. we change the replication factor (RF) of a KS, both the
tables' RFs and MVs' RFs are updated along with tablets replicas.
The `test_tablet_rf_change` testcase has been extended to also verify
that MVs' tablets replicas are updated when RF changes.
Fixes: #20240
(cherry picked from commit 5ac16e29e6)
Closesscylladb/scylladb#21023
Tablets load balancer is unable to process more than a single pending
replica, thus ALTER tablets KS cannot accept an ALTER statement which
would result in creating 2+ pending replicas, hence it has to validate
if the sum of absoulte differences of RFs specified in the statement is
not greter than 1.
(cherry picked from commit ee56bbfe61)
A bug has been discovered while trying to ALTER tablets KS and
specifying only 1 out of 2 DCs - the not specified DC's RF has been
zeroed. This is because ALTER tablets KS updated the KS only with the
RF-per-DC mapping specified in the ALTER tablets KS statement, so if a
DC was ommitted, it was assigned a value of RF=0.
This commit fixes that plus additionally passes all the KS options, not
only the replication options, to the topology coordinator, where the KS
update is performed.
`initial_tablets` is a special case, which requires a special handling
in the source code, as we cannot simply update old initial_tablet's
settings with the new ones, because if only ` and TABLETS = {'enabled':
true}` is specified in the ALTER tablets KS statement, we should not zero the `initial_tablets`, but
rather keep the old value - this is tested by the
`test_alter_preserves_tablets_if_initial_tablets_skipped` testcase.
Other than that, the above mentioned testcase started to fail with
these changes, and it appeared to be an issue with the test not waiting
until ALTER is completed, and thus reading the old value, hence the
test's body has been modified to wait for ALTER to complete before
performing validation.
(cherry picked from commit 2aabe7f09c)
ALTER tablets KS validated if RF is not changed by more than 1 for DCs
that already had replicas, but not for DCs that didn't have them yet, so
specifying an RF jump from 0 to 2 was possible when listing a new DC in
ALTER tablets KS statement, which violated internal invariants of
tablets load balancer.
This PR fixes that bug and adds a multi-dc testcases to check if adding
replicas to a new DC and removing replicas from a DC is honoring the RF
change constraints.
Refs: #20039
(cherry picked from commit 47acdc1f98)
1. Renamed the testcase to emphasize that it only focuses on testing
changing RF - there are other tests that test ALTER tablets KS
in general.
2. Fixed whitespaces according to PEP8
(cherry picked from commit adf453af3f)
`change_default_rf` is not used anywhere, moreover it uses
`replication_factor` tag, which is forbidden in ALTER tablets KS
statement.
(cherry picked from commit 042825247f)
There are two bits that control whenter replication strategy for a
keyspace will use tablets or not -- the configuration option and CQL
parameter. This patch tunes its parsing to implement the logic shown
below:
if (strategy.supports_tablets) {
if (cql.with_tablets) {
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
throw "tablets are not enabled";
}
} else if (cql.with_tablets = off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
return create_keyspace_without_tablets();
}
}
} else { // strategy doesn't support tablets
if (cql.with_tablets == on) {
throw "invalid cql parameter";
} else if (cql.with_tablets == off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
return create_keyspace_without_tablets();
}
}
closes: #20088
In order to enable tablets "by default" for NetworkTopologyStrategy
there's explicit check near ks_prop_defs::get_initial_tablets(), that's
not very nice. It needs more care to fix it, e.g. provide feature
service reference to abstract_replication_strategy constructor. But
since ks_prop_defs code already highjacks options specifically for that
strategy type (see prepare_options() helper), it's OK for now.
There's also #20768 misbehavior that's preserved in this patch, but
should be fixed eventually as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#20928
Fixes#20862
With the change in 60af2f3cb2 the bookkeep
for buffer memory was changed subtly, the problem here that we would
shrink buffer size before we after flush use said buffer's size to
decrement the buffer_list_bytes value, previously inc:ed by the full,
allocated size. I.e. we would slowly grow this value instead of adjusting
properly to actual used bytes.
Test included.
(cherry picked from commit ee5e71172f)
Closesscylladb/scylladb#20914
For each new node added to the raft config populate it's ID to IP mapping in raft address map from the gossiper. The mapping may have expired if a node is added to the raft configuration long after it first appears in the gossiper.
Fixes scylladb/scylladb#20600
Backport to all supported versions since the bug may cause bootstrapping failure.
(cherry picked from commit bddaf498df)
(cherry picked from commit 9e4cd32096)
Refs #20601Closesscylladb/scylladb#20848
* github.com:scylladb/scylladb:
test: extend existing test to check that a joining node can map addresses of all pre-existing nodes during join
group0: make sure that address map has an entry for each new node in the raft configuration
Before 17f4a151ce the node was marked as
been replaced in join_group0 state, before it actually joins the group0,
so by the time it actually joins and starts transferring snapshot/log no
traffic is sent to it. The commit changed this to mark the node as
being replaced after the snapshot/log is already transferred so we can
get the traffic to the node while it sill did not caught up with a
leader and this may causes problems since the state is not complete.
Mark the node as being replaced earlier, but still add the new node to
the topology later as the commit above intended.
Fixes: https://github.com/scylladb/scylladb/issues/20629
Need to be backported since this is a regression
(cherry picked from commit 644e7a2012)
(cherry picked from commit c0939d86f9)
(cherry picked from commit 1b4c255ffd)
Closesscylladb/scylladb#20834
* github.com:scylladb/scylladb:
test: amend test_replace_reuse_ip test to check that there is no stale writes after snapshot transfer starts
topology coordinator:: mark node as being replaced earlier
topology coordinator: do metadata barrier before calling finish_accepting_node() during replace
Increase workers for that used in method async_rmtree() that is used for
cleaning directories. This should help to reduce flakiness.
Increasing the workers count was introduced in f54b7f5427
but there is no need to backport the whole commit.
Closesscylladb/scylladb#20795
The `database::get_all_tables_flushed_at` method returns a variable
without setting the computed all_tables_flushed_at value. This causes
its caller, `maybe_flush_all_tables` to flush all the tables everytime
regardless of when they were last flushed. Fix this by returning
the computed value from `database::get_all_tables_flushed_at`.
Fixes#20301Closesscylladb/scylladb#20471
* github.com:scylladb/scylladb:
cql-pytest: add test to verify compaction_flush_all_tables_before_major_seconds config
database::get_all_tables_flushed_at: fix return value
(cherry picked from commit 0e5b444777)
Backported from #20471 to 6.1.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#20581
The test performs consecutive schema changes in RECOVERY mode. The
second change relies on the first. However the driver might route the
changes to different servers and we don't have group 0 to guarantee
linearizability. We must rely on the first change coordinator to push
the schema mutations to other servers before returning, but that only
happens when it sees other servers as alive when doing the schema
change. It wasn't guaranteed in the test. Fix this.
Fixesscylladb/scylladb#20791
Should be backported to all branches containing this test to reduce
flakiness.
(cherry picked from commit f390d4020a)
Closesscylladb/scylladb#20809
In the current scenario, We check if a node being removed is normal
on the node initiating the removenode request. However, we don't have a
similar check on the topology coordinator. The node being removed could be
normal when we initiate the request, but it doesn't have to be normal when
the topology coordinator starts handling the request.
For example, the topology coordinator could have removed this node while handling
another removenode request that was added to the request queue earlier.
This commit intends to fix this issue by adding more checks in the enqueuing phase
and return errors for duplicate requests for node removal.
This PR fixes a bug. Hence we need to backport it.
Fixes: scylladb/scylladb#20271
(cherry picked from commit b25b8dccbd)
Closesscylladb/scylladb#20800
let's assume there are 2 nodes, n1, n2. n1 is the coordinator.
1) n1 emits split
2) n1 and n2 complete split work
3) n1 becomes aware all replicas are ready for split
4) n2 restarts, but places split sstable into main group[1]
5) n1 executes split
6) n2 handles split completion, but see the main group is not empty
[1]: During split, main group should only contain unsplit sstables.
If all sstables are split, main must be empty.
This is a result of replica not setting storage group to split mode on restart
(using tablet map) and therefore sstables are incorrectly placed on main group.
The fix is about looking at tablet map and setting group to split mode before
sstables are populated into it.
Refs #20626.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 999f1f1318)
The test configures write timeout to much smaller value to make the test
run faster since for some writes sleep is inserted to hit the timeout,
but it makes aarch64 debug flaky since timeout happens when it should
not because of a natural slowness.
(cherry picked from commit 71a5b1c6dd)
Closesscylladb/scylladb#20777
Bind variables in CQL have two formats: positional (?) where a variable is referred to by its relative position in the statement, and named (:var), where the user is expected to supply a name->value mapping.
In 19a6e69001 we identified the case where a named bind variable appears twice in a query, and collapsed it to a single entry in the statement metadata. Without this, a driver using the named variable syntax cannot disambiguate which variable is referred to.
However, it turns out that users can use the positional call form even with the named variable syntax, by using the positional API of the driver. To support this use case, we add a configuration variable to disable the same-variable detection.
Because the detection has to happen when the entire statement is visible, we have to supply the configuration to the parser. We call it the dialect and pass it from all callers. The alternative would be to add a pre-prepare call similar to fill_prepare_context that rewrites all expressions in a statement to deduplicate variables.
A unit test is added.
Fixes https://github.com/scylladb/scylladb/issues/15559
This may be useful to users transitioning from Cassandra, so merits a backport.
(cherry picked from commit f9322799af)
(cherry picked from commit d69bf4f010)
(cherry picked from commit ea8441dfa3)
Refs https://github.com/scylladb/scylladb/pull/19493Closesscylladb/scylladb#20590
* github.com:scylladb/scylladb:
cql3: add option to not unify bind variables with the same name
cql3: introduce dialect infrastructure
cql3: prepared_statement_cache: drop cache key default constructor
Merge 'config: round-trip boolean configuration variables' from Avi Kivity
In https://github.com/scylladb/scylladb/pull/18729, we introduced a new statement tenant $maintenance, but the change wasn't protected by any cluster feature.
This wasn't a problem for OSS, since unknown isolation cookie just uses default scheduling group. However, in enterprise that leads to creating a service level on not-upgraded nodes, which may end up in an error if user create maximum number of service levels.
This patch adds a cluster feature to guard adding the new tenant. It's done in the way to handle two upgrade scenarios:
version without $maintenance tenant -> version with $maintenance tenant guarded by a feature
version with $maintenance tenant but not guarded by a feature -> version with $maintenance tenant guarded by a feature
The PR adds enabled flag to statement tenants.
This way, when the tenant is disabled, it cannot be used to create a connection, but it can be used to accept an incoming connection.
The $maintenance tenant is added to the config as disabled and it gets enabled once the corresponding feature is enabled.
Fixes https://github.com/scylladb/scylladb/issues/20070
Refs https://github.com/scylladb/scylla-enterprise/issues/4403
(cherry picked from commit d44844241d)
(cherry picked from commit 71a03ef6b0)
(cherry picked from commit b4b91ca364)
Refs https://github.com/scylladb/scylladb/pull/19802Closesscylladb/scylladb#20674
* github.com:scylladb/scylladb:
message/messaging_service: guard adding maintenance tenant under cluster feature
message/messaging_service: add feature_service dependency
message/messaging_service: add `enabled` flag to statement tenants
This is a manual backport of #20212 to 6.1, superseding #20345 (which had run into conflicts).
Please see the individual commit messages for backport notes.
Fixes#10305Closesscylladb/scylladb#20355
* github.com:scylladb/scylladb:
generic_server: make server::stop() idempotent
generic_server: coroutinize server::shutdown()
generic_server: make server::shutdown() idempotent
test/generic_server: add test case
configure, cmake: sort the lists of boost unit tests
generic_server: convert connection tracking to seastar::gate
Consider the following:
```
T
0 split prepare starts
1 repair starts
2 split prepare finishes
3 repair adds unsplit sstables
4 repair ends
5 split executes
```
If repair produces sstable after split prepare phase, the replica will not split that sstable later, as prepare phase is considered completed already. That causes split execution to fail as replicas weren't really prepared. This also can be triggered with load-and-stream which shares the same write (consumer) path.
The approach to fix this is the same employed to prevent a race between split and migration. If migration happens during prepare phase, it can happen source misses the split request, but the tablet will still be split on the destination (if needed). Similarly, the repair writer becomes responsible for splitting the data if underlying table is in split mode. That's implemented in replica::table for correctness, so if node crashes, the new sstable missing split is still split before added to the set.
Fixes https://github.com/scylladb/scylladb/issues/19378.
Fixes https://github.com/scylladb/scylladb/issues/19416.
Please replace this line with justification for the backport/* labels added to this PR
(cherry picked from commit 239344ab55)
(cherry picked from commit 74612ad358)
Refs https://github.com/scylladb/scylladb/pull/19427Closesscylladb/scylladb#20595
* github.com:scylladb/scylladb:
tablets: Fix race between repair and split
compaction: Allow "offline" sstable to be split
Consider the following:
T
0 split prepare starts
1 repair starts
2 split prepare finishes
3 repair adds unsplit sstables
4 repair ends
5 split executes
If repair produces sstable after split prepare phase, the replica
will not split that sstable later, as prepare phase is considered
completed already. That causes split execution to fail as replicas
weren't really prepared. This also can be triggered with
load-and-stream which shares the same write (consumer) path.
The approach to fix this is the same employed to prevent a race
between split and migration. If migration happens during prepare
phase, it can happen source misses the split request, but the
tablet will still be split on the destination (if needed).
Similarly, the repair writer becomes responsible for splitting
the data if underlying table is in split mode. That's implemented
in replica::table for correctness, so if node crashes, the new
sstable missing split is still split before added to the set.
Fixes#19378.
Fixes#19416.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 74612ad358)
Bind variables in CQL have two formats: positional (`?`) where a
variable is referred to by its relative position in the statement,
and named (`:var`), where the user is expected to supply a
name->value mapping.
In 19a6e69001 we identified the case where a named bind variable
appears twice in a query, and collapsed it to a single entry in the
statement metadata. Without this, a driver using the named variable
syntax cannot disambiguate which variable is referred to.
However, it turns out that users can use the positional call form
even with the named variable syntax, by using the positional
API of the driver. To support this use case, we add a configuration
variable to disable the same-variable detection.
Because the detection has to happen when the entire statement is
visible, we have to supply the configuration to the parser. We
call it the `dialect` and pass it from all callers. The alternative
would be to add a pre-prepare call similar to fill_prepare_context that
rewrites all expressions in a statement to deduplicate variables.
A unit test is added.
Fixes#15559
(cherry picked from commit ea8441dfa3)
(cherry picked from commit edb3068ecf)
A dialect is a different way to interpret the same CQL statement.
Examples:
- how duplicate bind variable names are handled (later in this series)
- whether `column = NULL` in LWT can return true (as is now) or
whether it always returns NULL (as in SQL)
Currently, dialect is an empty structure and will be filled in later.
It is passed to query_processor methods that also accept a CQL string,
and from there to the parser. It is part of the prepared statement cache
key, so that if the dialect is changed online, previous parses of the
statement are ignored and the statement is prepared again.
The patch is careful to pick up the dialect at the entry point (e.g.
CQL protocol server) so that the dialect doesn't change while a statement
is parsed, prepared, and cached.
(cherry picked from commit d69bf4f010)
When you SELECT a boolean from system.config, it reads as true/false, but this isn't accepted
on UPDATE (instead, we accept 1/0). This is surprising and annoying, so accept true/false in
both directions.
Not a regression, so a backport isn't strictly necessary.
Closesscylladb/scylladb#19792
* github.com:scylladb/scylladb:
config: specialize from-string conversion for bool
config: wrap boost::lexical_cast<> when converting from strings
(cherry picked from commit 9eb47b3ef0)
c70f321c6f added an extra check if KS
exists. This check can throw `data_dictionary::no_such_keyspace`
exception, which is supposed to be caught and a more user-friendly
exception should be thrown instead.
This commit fixes the above problem and adds a testcase to validate it
doesn't appear ever again.
Also, I moved the check for the keyspace outside of the `for` loop, as
it doesn't need to be checked repeatedly.
Additionally, I added an extra comment to both `no_such_keyspace` and
`no_such_column_family` exceptions explaining they should not be
returned directly to the caller, as they lack error code, which may not
trigger correct exceptions handling mechanisms on the driver side.
Fixes: #20097
(cherry picked from commit f1e8976fbe)
Closesscylladb/scylladb#20553
The test cases in this file use an error injection to reduce raft group
0 timeouts (from the default 1 minute), in order to speed up the tests;
the scenarios expect these timeouts to happen, so we want them to happen
as quick as possible, but we don't want to reduce timeouts so much that
it will make other operations fail when we don't expect them to (e.g.
when the test wants to add a node to the cluster).
Unfortunately the selected 5 seconds in debug mode was not enough and
made the tests flaky: scylladb/scylladb#20111.
Increase it to 10 seconds. This unfortunately will slow down these tests
as they have to sometimes wait for 10 seconds for the timeout to happen.
But better to have this than a flaky test.
Fixes: scylladb/scylladb#20111
(cherry picked from commit 52fdf5b4c9)
Closesscylladb/scylladb#20477
repair_service::repair_flush_hints_batchlog_handler may access batchlog
manager while it is uninitialized.
Throw if batchlog manager isn't initialized.
Fixes: #20236.
Needs backport to 6.0 and 6.1 as they suffer from the uninitialized bm access.
(cherry picked from commit d8e4393418)
(cherry picked from commit f38bb6483a)
Refs #20251Closesscylladb/scylladb#20351
* github.com:scylladb/scylladb:
test: add test to ensure repair won't fail with uninitialized bm
repair: throw if batchlog manager isn't initialized
When only inter dc encryption is enabled a non encrypted connection
between two nodes is allowed only if both nodes are in the same dc.
If a nodes that initiates the connection knows that dst is in the same
dc and hence use non encrypted connection, but the dst not yet knows the
topology of the src such connection will not be allowed since dst cannot
guaranty that dst is in the same dc.
Currently, when topology coordinator is used, a replacing node will
appear in the coordinator's topology immediately after it is added to the
group0. The coordinator will try to send raft message to the new node
and (assuming only inter dc encryption is enabled and replacing node and
the coordinator are in the same dc) it will try to open regular, non encrypted,
connection to it. But the replacing node will not have the coordinator
in it's topology yet (it needs to sync the raft state for that). so it
will reject such connection.
To solve the problem the patch does not add a replacing node that was
just added to group0 to the topology. It will be added later, when
tokens will be assigned to it. At this point a replacing node will
already make sure that its topology state is up-to-date (since it will
execute a raft barrier in join_node_response_params handler) and it knows
coordinator's topology. This aligns replace behaviour with bootstrap
since bootstrap also does not add a node without a ring to the topology.
The patch effectively reverts b8ee8911caFixes: scylladb/scylladb#19025
(cherry picked from commit 17f4a151ce)
Check whether we can stop a generic server without first asking it to
listen.
The test fails currently; the failure mode is a hang, which triggers the 5
minute timeout set in the test:
> unknown location(0): fatal error: in "stop_without_listening":
> seastar::timed_out_error: timedout
> seastar/src/testing/seastar_test.cc(43): last checkpoint
> test/boost/generic_server_test.cc(34): Leaving test case
> "stop_without_listening"; testing time: 300097447us
Backport notes for 6.1:
- Replace
#include "utils/assert.hh"
SCYLLA_ASSERT(false);
with
#include <cassert>
assert(false);
due to 6.1 lacking commit aa1270a00c ("treewide: change assert() to
SCYLLA_ASSERT()", 2024-08-05). The header file "utils/assert.hh"
wouldn't be difficult to backport, but separating it from the treewide
changes in commit aa1270a00c might not be the best idea.
Signed-off-by: Laszlo Ersek <laszlo.ersek@scylladb.com>
(cherry picked from commit dbc0ca6354)
Both lists were obviously meant to be sorted originally, but by today
we've introduced many instances of disorder -- thus, inserting a new test
in the proper place leaves the developer scratching their head. Sort both
lists.
Backport notes for 6.1:
- Conflicts in "configure.py", unsurprisingly. For the backport, I sorted
the boost unit test list manually, from scratch.
Signed-off-by: Laszlo Ersek <laszlo.ersek@scylladb.com>
(cherry picked from commit 931f2f8d73)
It is unsafe to restrict the sync nodes for repair to the source data center if it has too low replication factor in network_topology_replication_strategy, or if other nodes in that DC are ignored.
Also, this change restricts the usage of source_dc to `network_topology` and `everywhere_topology`
strategies, as with simple replication strategy
there is no guarantee that there would be any
more replicas in that data center.
Fixes#16826
Reproducer submitted as https://github.com/scylladb/scylla-dtest/pull/3865
It fails without this fix and passes with it.
* Requires backport to live versions. Issue hit in the filed with 2022.2.14
(cherry picked from commit 8b1877f3ca)
(cherry picked from commit 0419b1d522)
(cherry picked from commit b5d0ab092c)
(cherry picked from commit 9729dd21c3)
(cherry picked from commit 8665eef98c)
(cherry picked from commit 5f655e41e3)
Refs #16827Closesscylladb/scylladb#20228
* github.com:scylladb/scylladb:
raft_rebuild: propagate source_dc force option to rebuild_option
repair: do_rebuild_replace_with_repair: use source_dc only when safe
repair: replace_with_repair: pass the replace_node downstream
repair: replace_with_repair: pass ignore_nodes as a set of host_id:s
repair: replace_rebuild_with_repair: pass ks_erms from caller
nodetool: rebuild: add force option
Add and use utils::optional_param to pass source_dc
The `keyspace_compaction` method incorrectly appends the column family
parameter to the URL using a regular string, `"?cf={table}"`, instead of
an f-string, `f"?cf={table}"`. As a result, the column family name is
sent as `{table}` to the server, causing the compaction request to fail.
Fix this issue by passing the parameter to the POST request using a
dictionary instead of appending it to the URL.
Fixes#20264
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
(cherry picked from commit dc5c45e803)
Closesscylladb/scylladb#20273
Attempting to read a partition via `SELECT * FROM MUTATION_FRAGMENTS()`, which the node doesn't own, from a table using tablets causes a crash.
This is because when using tablets, the replica side simply doesn't handle requests for un-owned tokens and this triggers a crash.
We should probably improve how this is handled (an exception is better than a crash), but this is outside the scope of this PR.
This PR fixes this and also adds a reproducer test.
Fixes: https://github.com/scylladb/scylladb/issues/18786
Fixes a regression introduced in 6.0, so needs backport to 6.0 and 6.1
(cherry picked from commit de5329157c)
(cherry picked from commit 46563d719f)
(cherry picked from commit 4e2d7aa2a2)
Refs #20109Closesscylladb/scylladb#20313
* github.com:scylladb/scylladb:
test/tablets: Test that reading tablets' mutations from MUTATION_FRAGMENTS works
replica/mutation_dump: enfore pinning of effective replication map
replica/mutation_dump: handle un-owned tokens (with tablets)
This series fixes an issue where histogram Summaries return an infinite value.
It updated the quantile calculation logic to address cases where values fall into the infinite bucket of a histogram.
Now, instead of returning infinite (max int), the calculation will return the last bucket limit, ensuring finite outputs in all cases.
The series adds a test for summaries with a specific test case for this scenario.
Fixes#20255
Need backport to 6.0, 6.1 and 2023.1 and above
(cherry picked from commit 011aa91a8c)
(cherry picked from commit 644e6f0121)
Refs #20257Closesscylladb/scylladb#20303
* github.com:scylladb/scylladb:
test/estimated_histogram_test Add summary tests
utils/histogram.hh: Make summary support inifinite bucket.
To prevent stalls due to large number of tokens.
For example, large cluster with say 70 nodes can have
more than 16K tokens.
Fixes#19757
(cherry picked from commit d385219a12)
(cherry picked from commit 333c0d7c88)
(cherry picked from commit b2abbae24b)
(cherry picked from commit 824bdf99d2)
(cherry picked from commit ea5a0cca10)
(cherry picked from commit 2bbbe2a8bc)
(cherry picked from commit 686a8f2939)
Refs #19758Closesscylladb/scylladb#20297
* github.com:scylladb/scylladb:
abstract_replication_strategy: make get_ranges async
database: get_keyspace_local_ranges: get vnode_effective_replication_map_ptr param
compaction: task_manager_module: open code maybe_get_keyspace_local_ranges
alternator: ttl: token_ranges_owned_by_this_shard: let caller make the ranges_holder
alternator: ttl: can pass const gms::gossiper& to ranges_holder
alternator: ttl: ranges_holder_primary: unconstify _token_ranges member
alternator: ttl: refactor token_ranges_owned_by_this_shard
Commit 9f93dd9fa3 changed `tablet_sstable_set::_sstable_sets` to be a `absl::flat_hash_map` and in addition, `std::set<size_t> _sstable_set_ids` was added. `_sstable_set_ids` is set up in the `tablet_sstable_set(schema_ptr s, const storage_group_manager& sgm, const locator::tablet_map& tmap)` constructor, but it is not copied in `tablet_sstable_set(const tablet_sstable_set& o)`.
This affects the `tablet_sstable_set::tablet_sstable_set` method as it depends on the copy constructor. Since sstable set can be cloned when a new sstable set is added, the issue will cause ids not being copied into the new sstable set. It's healed only after compaction, since the sstable set is rebuilt from scratch there.
This PR fixes this issue by removing the existing copy constructor of `tablet_sstable_set` to enable the implicit default copy constructor.
Fixes#19519
(cherry picked from commit 44583eed9e)
(cherry picked from commit ec47b50859)
Refs #20115Closesscylladb/scylladb#20201
* github.com:scylladb/scylladb:
boost/sstable_set_test: add testcase to test tablet_sstable_set copy constructor
replica: fix copy constructor of tablet_sstable_set
Currently it doesn't, one of the node crashes with std::out_of_range
exception and meaningless calltrace
[Botond]: this test checks the case of reading a partition via
MUTATION_FRAGMENTS from a node which doesn't own said partition.
refs: #18786
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
(cherry picked from commit 4e2d7aa2a2)
This patch adds tests for summary calculation. It adds two tests, the
first is a basic calculation for P50, P95, P99 by adding 100 elements
into 20 buckets.
The second test look that if elements are found in the infinite bucket,
the result would be the lower limit (33s) and not infinite.
Relates to #20255
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 644e6f0121)
This change fixes#17237, fixes#5361 and fixes#5362 by passing the limit value down the call chain in cql3. A test is also added.
fixes: #17237fixes: #5361fixes: #5362
The regression happened in 5.4 as we changed the way GROUP BY is processed in 432cb02 - to force aggregation when it is used. The LIMIT value was not passed to aggregations and thus we failed to adhere to it.
W want to backport this fix to 5.4 and 6.0 to have continuous correct results for the test case from #17237
This patch consists of 4 commits:
- fa4225ea0fac2057b7a9976f57dc06bcbd900cd4 - cql3: respect the user-defined page size in aggregate queries - a precondition for this patch to be implementable
- 8fbe69e74dca16ed8832d9a90489ca47ba271d0b - cql3/select_statement: simplify the get_limit function - the `do_get_limit()` function did a lot of legwork that should not be associated with it. This change makes it trivial and makes its callers do additional checks (for unset guards, or for an aggregate query)
- 162828194a2b88c22fbee335894ff045dcc943c9 - cql3: process LIMIT for GROUP BY queries - pass the limit value down the chain and make use of it. This is the actual fix to #17237
- b3dc6de6d6cda8f5c09b01463bb52f827a6a00b4 - test/cql-pytest: Add test for GROUP BY queries with LIMIT - tests
(cherry picked from commit 08f3219cb8)
(cherry picked from commit 3838ad64b3)
(cherry picked from commit e7ae7f3662)
(cherry picked from commit 9db272c949)
Refs: #18842Closesscylladb/scylladb#20154
* github.com:scylladb/scylladb:
test/cql-pytest: Add test for GROUP BY queries with LIMIT
cql3: process LIMIT for GROUP BY queries
cql3/select_statement: simplify the get_limit function
cql3: respect the user-defined page size in aggregate queries
To prevent stalls due to large number of tokens.
For example, large cluster with say 70 nodes can have
more than 16K tokens.
Fixes#19757
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 686a8f2939)
