This test set the time window to 1 hour and checks that the strategy
works accordingly.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit cf54af9e58)
That was a bug in the test itself. It could happen that a sstable would
incorrectly belong to the next time window if the current minute is
approaching its end. Fix is about having all sstables that we want in
the same time window with the same min/max timestamp.
Fixes#1448.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <ee25d49e7ed12b4cf7d018a08163404c3d122e56.1468782787.git.raphaelsc@scylladb.com>
Originally, streamed_mutations guaranteed that emitted tombstones are
disjoint. In order to achieve that two separate objects were produced
for each range tombstone: range_tombstone_begin and range_tombstone_end.
Unfortunately, this forced sstable writer to accumulate all clustering
rows between range_tombstone_begin and range_tombstone_end.
However, since there is no need to write disjoint tombstones to sstables
(see #1153 "Write range tombstones to sstables like Cassandra does") it
is also not necessary for streamed_mutations to produce disjoint range
tombstones.
This patch changes that by making streamed_mutation produce
range_tombstone objects directly.
Signed-off-by: Paweł Dziepak <pdziepak@scylladb.com>
sstable_list is now a map<generation, sstable>; change it to a set
in preparation for replacing it with sstable_set. The change simplifies
a lot of code; the only casualty is the code that computes the highest
generation number.
This patch changes the type of the mutation partition's row_tombstones
to be a range_tombstone_list, so that they are now represented as a
set of disjoint ranges. All of its usages are updated accordingly.
Fixes#1155
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
It was noticed that small sstables will accumulate for a column family because
scylla was limited to two compaction per shard, and a column family could have
at most one compaction running at a given shard. With the number of sstables
increasing rapidly, read performance is degraded.
At the moment, our compaction manager works by running two compaction task
handlers that run in parallel to the rest of the system. Each task handler
gets to run when needed, gets a column family from compaction manager queue,
runs compaction on it, and goes to sleep again. That's basically its cycle.
Compaction manager only allows one instance of a column family to be on its
queue, meaning that it's impossible for a column family to be compacted in
parallel. One compaction starts after another for a given column family.
To solve the problem described, we want to concurrently run compaction jobs
of a column family that have different "size tier" (or "weight").
For those unfamiliar, compaction job contains a list of sstables that will be
compacted together.
The "size tier" of a compaction job is the log of the total size of the input
sstables. So a compaction job only gets to run if its "size tier" is not the
same of an ongoing compaction. There is no point in compacting concurrently at
the same "size tier", because that slows down both compactions.
We will no longer queue column families in compaction manager. Instead, we
create a new fiber to run compaction on demand.
This fiber that runs asynchronously will do the following:
1) Get a compaction job from compaction strategy.
2) Calculate "size tier" of compaction job.
3) Run compaction job if its "size tier" is not the same of an ongoing
compaction for the given column family.
As before, it may decide to re-compact a column family based on a stat stored
in column family object.
Ran all compaction-related dtests.
Fixes#1216.
Reviewed-by: Nadav Har'El <nyh@scylladb.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <d30952ff136192a522bde4351926130addec8852.1462311908.git.raphaelsc@scylladb.com>
After commit a843aea547, a gate was introduced to make sure that
an asynchronous operation is finished before column family is
destroyed. A sstable testcase was not stopping column family,
instead it just removed column family from compaction manager.
That could cause an user-after-free if column family is destroyed
while the asynchronous operation is running. Let's fix it by
stopping column family in the test.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <ed910ec459c1752148099e6dc503e7f3adee54da.1461177411.git.raphaelsc@scylladb.com>
This patch makes sure that every time we need to create a new generation number -
the very first step in the creation of a new SSTable, the respective CF is already
initialized and populated. Failure to do so can lead to data being overwritten.
Extensive details about why this is important can be found
in Scylla's Github Issue #1014
Nothing should be writing to SSTables before we have the chance to populate the
existing SSTables and calculate what should the next generation number be.
However, if that happens, we want to protect against it in a way that does not
involve overwriting existing tables. This is one of the ways to do it: every
column family starts in an unwriteable state, and when it can finally be written
to, we mark it as writeable.
Note that this *cannot* be a part of add_column_family. That adds a column family
to a db in memory only, and if anybody is about to write to a CF, that was most
likely already called. We need to call this explicitly when we are sure we're ready
to issue disk operations safely.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Compaction manager was initially created at utils because it was
more generic, and wasn't only intended for compaction.
It was more like a task handler based on futures, but now it's
only intended to manage compaction tasks, and thus should be
moved elsewhere. /sstables is where compaction code is located.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
When compacting sstable, mutation that doesn't belong to current shard
should be filtered out. Otherwise, mutation would be duplicated in
all shards that share the sstable being compacted.
sstable_test will now run with -c1 because arbitrary keys are chosen
for sstables to be compacted, so test could fail because of mutations
being filtered out.
fixes#527.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <1acc2e8b9c66fb9c0c601b05e3ae4353e514ead5.1453140657.git.raphaelsc@scylladb.com>
Representation format is an implementation detail of
partition_key. Code which compares a value to representation makes
assumptions about key's representation. Compare keys to keys instead.
Message-Id: <1453136316-18125-1-git-send-email-tgrabiec@scylladb.com>
"This patch is intended to add support to column family cleanup, which will
make 'nodetool cleanup' possible.
Why is this feature needed? Remove irrelevant data from a node that loses part
of its token range to a newly added node."
The implementation is about storing generation of compacting sstables
in an unordered set per column family, so before strategy is called,
compaction manager will filter out compacting sstables.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
We have an API that wraps open_file_dma which we use in some places, but in
many other places we call the reactor version directly.
This patch changes the latter to match the former. It will have the added benefit
of allowing us to make easier changes to these interfaces if needed.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <29296e4ec6f5e84361992028fe3f27adc569f139.1451950408.git.glauber@scylladb.com>
This patch introduces a test for reading keys from a single sstable with
the range begining and end being the keys present in the index summary.
Signed-off-by: Paweł Dziepak <pdziepak@scylladb.com>
Replace db_clock::now_in_usec() and db_clock::now() * 1000 accesses
where the intent is to create a new auto-generate cell timestamp with
a call to new_timestamp(). Now the knowledge of how to create timestamps
is in a single place.
Since bytes is a very generic value that is returned from many calls,
it is easy to pass it by mistake to a function expecting a data_value,
and to get a wrong result. It is impossible for the data_value constructor
to know if the argument is a genuine bytes variable, a data_value of another
type, but serialized, or some other serialized data type.
To prevent misuse, make the data_value(bytes) constructor
(and complementary data_value(optional<bytes>) explicit.
We use boost::any to convert to and from database values (stored in
serlialized form) and native C++ values. boost::any captures information
about the data type (how to copy/move/delete etc.) and stores it inside
the boost::any instance. We later retrieve the real value using
boost::any_cast.
However, data_value (which has a boost::any member) already has type
information as a data_type instance. By teaching data_type intances about
the corresponding native type, we can elimiante the use of boost::any.
While boost::any is evil and eliminating it improves efficiency somewhat,
the real goal is growing native type support in data_type. We will use that
later to store native types in the cache, enabling O(log n) access to
collections, O(1) access to tuples, and more efficient large blob support.
"This patchset implements load_new_sstables, allowing one to move tables inside the
data directory of a CF, and then call "nodetool refresh" to start using them.
Keep in mind that for Cassandra, this is deemed an unsafe operation:
https://issues.apache.org/jira/browse/CASSANDRA-6245
It is still for us something we should not recommend - unless the CF is totally
empty and not yet used, but we can do a much better job in the safety front.
To guarantee that, the process works in four steps:
1) All writes to this specific column family are disabled. This is a horrible thing to
do, because dirty memory can grow much more than desired during this. Throughout out
this implementation, we will try to keep the time during which the writes are disabled
to its bare minimum.
While disabling the writes, each shard will tell us about the highest generation number
it has seen.
2) We will scan all tables that we haven't seen before. Those are any tables found in the
CF datadir, that are higher than the highest generation number seen so far. We will link
them to new generation numbers that are sequential to the ones we have so far, and end up
with a new generation number that is returned to the next step
3) The generation number computed in the previous step is now propagated to all CFs, which
guarantees that all further writes will pick generation numbers that won't conflict with
the existing tables. Right after doing that, the writes are resumed.
4) The tables we found in step 2 are passed on to each of the CFs. They can now load those
tables while operations to the CF proceed normally."
Avoid using long for it, and let's use a fixed size instead. Let's do signed
instead of unsigned to avoid upsetting any code that we may have converted.
Signed-off-by: Glauber Costa <glommer@scylladb.com>
test_setup::do_with_test_directory is missing. For some reason,
the test wasn't failing without it until now. Adding it is the
correct thing to do anyway.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Adapt our compaction code to start writing a new sstable if the
one being written reached its maximum size. Leveled strategy works
with that concept. If a strategy other than leveled is being used,
everything will work as before.
Signed-off-by: Raphael S. Carvalho <raphaelsc@cloudius-systems.com>
Currently, we control incremental backups behavior from the storage service.
This creates some very concrete problems, since the storage service is not
always available and initialized.
The solution is to move it to the column family (and to the keyspace so we can
properly propagate the conf file value). When we change this from the api, we will
have to iterate over all of them, changing the value accordingly.
Signed-off-by: Glauber Costa <glommer@scylladb.com>
