`system.client_routes` is a system table that sets the target address and ports for each `host_id`, for one or more connection (e.g., Private Link) represented by `connection_id`. Cloud will write the table via REST, and drivers will read it via CQL to override values obtained from `system.local` and `system.peers`.
This patch series contains:
- Introduction of `CLIENT_ROUTES` feature flag.
- Implementation of raft-based `system.client_routes` table
- Implementation of `v2/client-routes` POST/DELETE/GET endpoints
- Implementation of new `CLIENT_ROUTES_CHANGE` event that is sent to drivers when `system.client_routes` is changed
- New tests that verifies the aforementioned features
Ref: scylladb/scylla-enterprise#5699
For now, no automatic backport. However, the changes are planned to be release on `2025.4` either as a backport or a private build.
Closesscylladb/scylladb#27323
* https://github.com/scylladb/scylladb:
docs: describe CLIENT_ROUTES_CHANGE extension
test: add test for CLIENT_ROUTES event
service: transport: add CLIENT_ROUTES_CHANGE event
test: add cluster tests for client routes
test: add API tests for client_routes endpoints
test: add `timeout` parameter to `delete` in RESTClient
test: allow json_body in send
api: implement client_routes endpoints
api: add client_routes.json
service: main: add client_routes_service
db: add system.client_routes table
gms: add CLIENT_ROUTES feature
Introduce `system.client_routes`, a system table that sets the target
address and ports for each `host_id`, for one or more connections
(e.g., Private Link) represented by `connection_id`. Cloud will write
the table via REST, and drivers will read it via CQL to override
values obtained from `system.local` and `system.peers`.
The table is Raft-managed to provide consistent replication across
nodes.
Schema overview: each row is identified by `(connection_id, host_id)`
and describes where clients should connect: `address` and one or more of
`port`, `tls_port`, `alternator_port`, `alternator_https_port`.
`host_id` is a UUID (just as in ScyllaDB) but `connection_id` can be
any string to accept formats of all cloud providers. `address` is
also a regular string because it can represent either an IP address or
a domain. Ports are optional in the sense that at least one of
the four must be provided.
Ref: scylladb/scylla-enterprise#5699
The batchlog table contains an entry for each logged batch that is processed by the local node as coordinator. These entries are typically very short lived, they are inserted when the batch is processed and deleted immediately after the batch is successfully applied.
When a table has `tombstone_gc = {'mode': 'repair'}` enabled, every repair has to flush all hints and batchlogs, so that we can be certain that there is no live data in any of these, older than the last repair. Since batches can contain member queries from any number of tables, the whole batchlog has to be flushed, even if repair-mode tombstone-gc is enabled for a single table.
Flushing the batchlog table happens by doing a batchlog replay. This involves reading the entire content of this table, and attempting to replay+delete any live entries (that are old enough to be replayed). Under normal operating circumstances, 99%+ of the content of the batchlog table is partition tombstones. Because of this, scanning the content of this table has to process thousands to millions of tombstones. This was observed to require up to 20 minutes to finish, causing repairs to slow down to a crawl, as the batchlog-flush has to be repeated at the end of the repair of each token-range.
When trying to address this problem, the first idea was that we should expedite the garbage-collection of these accumulated tombstones. This experiment failed, see https://github.com/scylladb/scylladb/pull/23752. The commitlog proved to be an impossible to bypass barrier, preventing quick garbage-collection of tombstones. So long as a single commit-log segment is alive, holding content from the batchlog table, all tombstones written after are blocked from GC.
The second approach, represented by this PR, is to not rely in tombstone GC to reduce the tombstone amount. Instead restructure the table such that a single higher-order tombstone can be used to shadow and allow for the eviction of the myriads of individual batchlog entry tombstones. This is realized by reorganizing the batchlog table such that individual batches are rows, not partitions.
This new schema is introduced by the new `system.batchlog_v2` table, introduced by this PR:
CREATE TABLE system.batchlog_v2 (
version int,
stage int,
shard int,
written_at timestamp,
id uuid,
data blob,
PRIMARY KEY ((version, stage, shard), written_at, id));
The new schema organization has the following goals:
1) Make post-replay batchlog cleanup possible with a simple range-tombstone. This allows dropping the individual dead batchlog entries, as they are shadowed by a higher level tombstone. This enables dropping tombstones without tombstone GC.
2) To make the above possible, introduce the stage key component: batchlog entries that fail the first replay attempt, are moved to the failed_replay stage, so the initial stage can be cleaned up safely.
3) Spread out the data among Scylla shards, via the batchlog shard column.
4) Make batchlog entries ordered by the batchlog create time (id). This allows for selecting batchlogs to replay, without post-filtering of batchlogs that are too young to be replayed.
Fixes: https://github.com/scylladb/scylladb/issues/23358
This is an improvement, normally not a backport-candidate. We might override this and backport to allow wider use of `tombstone_gc: {'mode': 'repair'}`.
Closesscylladb/scylladb#26671
* github.com:scylladb/scylladb:
db/config: change batchlog_replay_cleanup_after_replays default to 1
test/boost/batchlog_manager_test: add test for batchlog cleanup
replica/mutation_dump: always set position weight for clustering positions
service/storage_proxy: s/batch_replay_throw/storage_proxy_fail_replay_batch/
test/lib: introduce error_injection.hh
utils/error_injection: add debug log to disable() and disable_all()
test/lib/cql_test_env: forward config to batchlog
test/lib/cql_test_env: add batch type to execute_batch()
test/lib/cql_assertions: add with_size(predicate) overload
test/lib/cql_assertions: add source location to fail messages
test/lib/cql_assertions: columns_assertions: add assert_for_columns_of_each_row()
test/lib/cql_assertions: rows_assertions::assert_for_columns_of_row(): add index bound check
test/lib/cql_assertions: columns_assertions: add T* with_typed_column() overload
db/batchlog_manager: config: s/write_timeout/reply_timeot/
db,service: switch to system.batchlog_v2
db/system_keyspace: introduce system.batchlog_v2
service,db: extract generation of batchlog delete mutation
service,db: extract get_batchlog_mutation_for() from storage-proxy
db/batchlog_manager: only consider propagation delay with tombstone-gc=repair
db/batchlog_manager: don't drop entire batch if one mutations' table was dropped
data_dictionary: table: add get_truncation_time()
db/batchlog_manager: batch(): replace map_reduce() with simple loop
db/batchlog_manager: finish coroutinizing replay_all_failed_batches
db/batchlog_manager: improve replayAllFailedBatches logs
This reverts commit faad0167d7. It causes
a regression in
test_two_tablets_concurrent_repair_and_migration_repair_writer_level
in debug mode (with ~5%-10% probability).
Fixes#27510.
Closesscylladb/scylladb#27560
This patch adds tablet repair progress report support so that the user
could use the /task_manager/task_status API to query the progress.
In order to support this, a new system table is introduced to record the
user request related info, i.e, start of the request and end of the
request.
The progress is accurate when tablet split or merge happens in the
middle of the request, since the tokens of the tablet are recorded when
the request is started and when repair of each tablet is finished. The
original tablet repair is considered as finished when the finished
ranges cover the original tablet token ranges.
After this patch, the /task_manager/task_status API will report correct
progress_total and progress_completed.
Fixes#22564Fixes#26896Closesscylladb/scylladb#26924
We switched to using v3 schema tables (in system_schema keyspace) in
2017, in 9eb91bc30b.
So no system should have the old schema any more.
No need to run legacy_schema_migrator on boot.
Closesscylladb/scylladb#27420
Rearranges the system.batchlog schema as follows:
CREATE TABLE system.batchlog_v2 (
version int,
stage int,
shard int,
written_at timestamp,
id uuid,
data blob,
PRIMARY KEY ((version, stage, shard), written_at, id));
With the following goals:
1) Make post-replay batchlog cleanup possible with a simple
range-tombstone. This allows dropping the individual dead batchlog
entries, as they are shadowed by a higher level tombstone. This
enables dropping tombstones without tombstone GC.
2) To make the above possible, introduce the stage key component:
batchlog entries that fail the first replay attempt, are moved to the
failed_replay stage, so the initial stage can be cleaned up safely.
3) Spread out the data among Scylla shards, via the batchlog shard
column.
4) Make batchlog entries ordered by the batchlog create time (id). This
allows for selecting batchlogs to replay, without post-filtering of
batchlogs that are too young to be replayed.
After previous commits, we can drop entire task's state and replace it
with single boolean flag, which determines if a task was aborted.
Once a task was aborted, it cannot get resurrected to a normal state.
Remove the FIXME comment for re-enabling caching of the large tables
since the tables are used infrequently [1].
[1] : github.com/scylladb/scylladb/pull/26789#issuecomment-3477540364
Fixes#26032
Signed-off-by: Gautam Menghani <gautam.opensource@gmail.com>
Closesscylladb/scylladb#26789
The topology_coordinator::is_excluded() creates a temporary hash
map for each call. This is probably not a performance problem since
left_nodes_rs contains only those left nodes that are referenced
from tablet replicas, this happens temporarily while e.g. a replaced
node is being rebuilt. On the other hand, why not just have a
dedicated field in the topology_state_machine, then this code wouldn't
look suspicious.
use utils::chunked_vector instead of std::vector to store cdc stream
sets for tablets.
a cdc stream set usually represents all streams for a specific table and
timestamp, and has a stream id per each tablet of the table. each stream
id is represented by 16 bytes. thus the vector could require quite large
contiguous allocations for a table that has many tablets. change it to
chunked_vector to avoid large contiguous allocations.
Fixesscylladb/scylladb#26791Closesscylladb/scylladb#26792
when loading CDC streams metadata for tablets from the tables, read only
new entries from the history table instead of reading all entries. This
improves the CDC metadata reloading, making it more efficient and
predictable.
the CDC metadata is loaded as part of group0 reload whenever the
internal CDC tables are modified. on tablet split / merge, we create a
new CDC timestamp and streams by writing them to the cdc_streams_history
table by group0 operation, and when it's applied we reload the in-memory
CDC streams map by reading from the tables and constructing the updated map.
Previously, on every update, we would read the entire
cdc_streams_history entries for the changed table, constructing all its
streams and creating a new map from scratch.
We improve this now by reading only new entries from cdc_streams_history
and append them to the existing map. we can do this because we only
append new entries to cdc_streams_history with higher timestamp than all
previous entries.
This makes this reloading more efficient and predictable, because
previously we would read a number of entries that depends on the number
of tablets splits and merges, which increases over time and is
unbounded, whereas now we read only a single stream set on each update.
Fixesscylladb/scylladb#26732
This commit extends sytem.scylla_local table with an additional
key/value pair that can be used later in this patch series to
keep an information that `sl:driver` was already created. The purpose
of storing this information is to ensure that `sl:driver` is
not recreated after being intentionally removed.
A new mutation is included in `register_raft_pull_snapshot` to keep
`service_level_driver_created` in state machine shapshot, which is
required for proper propagation of the value when a new node is added
to the cluster.
Refs: scylladb/scylladb#24411
The directory utils/ is supposed to contain general-purpose utility
classes and functions, which are either already used across the project,
or are designed to be used across the project.
This patch moves 8 files out of utils/:
utils/advanced_rpc_compressor.hh
utils/advanced_rpc_compressor.cc
utils/advanced_rpc_compressor_protocol.hh
utils/stream_compressor.hh
utils/stream_compressor.cc
utils/dict_trainer.cc
utils/dict_trainer.hh
utils/shared_dict.hh
These 8 files together implement the compression feature of RPC.
None of them are used by any other Scylla component (e.g., sstables have
a different compression), or are ready to be used by another component,
so this patch moves all of them into message/, where RPC is implemented.
Theoretically, we may want in the future to use this cluster of classes
for some other component, but even then, we shouldn't just have these
files individually in utils/ - these are not useful stand-alone
utilities. One cannot use "shared_dict.hh" assuming it is some sort of
general-purpose shared hash table or something - it is completely
specific to compression and zstd, and specifically to its use in those
other classes.
Beyond moving these 8 files, this patch also contains changes to:
1. Fix includes to the 5 moved header files (.hh).
2. Fix configure.py, utils/CMakeLists.txt and message/CMakeLists.txt
for the three moved source files (.cc).
3. In the moved files, change from the "utils::" namespace, to the
"netw::" namespace used by RPC. Also needed to change a bunch
of callers for the new namespace. Also, had to add "utils::"
explicitly in several places which previously assumed the
current namespace is "utils::".
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#25149
The namespace usage in this directory is very inconsistent, with files
and classes scattered in:
* global namespace
* namespace compaction
* namespace sstables
With cases, where all three used in the same file. This code used to
live in sstables/ and some of it still retains namespace sstables as a
heritage of that time. The mismatch between the dir (future module) and
the namespace used is confusing, so finish the migration and move all
code in compaction/ to namespace compaction too.
This patch, although large, is mechanic and only the following kind of
changes are made:
* replace namespace sstable {} with namespace compaction {}
* add namespace compaction {}
* drop/add sstables::
* drop/add compaction::
* move around forward-declarations so they are in the correct namespace
context
This refactoring revealed some awkward leftover coupling between
sstables and compaction, in sstables/sstable_set.cc, where the
make_sstable_set() methods of compaction strategies are implemented.
As requested in #22104, moved the files and fixed other includes and build system.
Moved files:
- combine.hh
- collection_mutation.hh
- collection_mutation.cc
- converting_mutation_partition_applier.hh
- converting_mutation_partition_applier.cc
- counters.hh
- counters.cc
- timestamp.hh
Fixes: #22104
This is a cleanup, no need to backport
Closesscylladb/scylladb#25085
When the view builder starts to build a new view, each shard registers
itself by writing the shard id and current token to the
scylla_views_builds_in_progress table.
Previously, this happened independently by each shard. We change it now
to register all shards "atomically" - when a shard registers itself, it
also registers all other shards with an empty status, if they aren't
registered yet. This ensures that we don't have a partial state in the
table where only some of the shards are registered, but we always have a
status for all shards.
The reason we want to register all shards atomically is that if it
happens that only some of the shards were registered, then we restart
and load the status from table, this doesn't work well for multiple
reasons.
One example is that to know how many shards we had previously, we take
the maximum shard id we see in the table. If it's different than the
current shard count, we will execute the reshard code. But of course, if
the last shard is missing from the table because it didn't register
itself, this calculation will be wrong, and we can't know the previous
number of shards.
This is a problem because suppose we have two shards, and shard 0
finished building the view but shard 1 didn't start. When we come up, we
will think that previously we had only a single shard and it completed
building everything, when in fact we built only half the view
approximately. The problem is that we don't have enough information in
the tables to know that.
There are additional problems related to reshard. In the reshard
function, whether it is executed because we actually do node reshard or
because we calculated the wrong number of previous shards, if the status
of some shard is missing then the calculation of new ranges will be
wrong. When some shard didn't make progress we should start building the
view from scratch. However, this doesn't happen if we don't have a
status for the shard, because the code looks only for shards that have a
status. In effect, this shard is considered complete even though it
didn't start. This could cause the view building to get stuck or
complete without building all tokens ranges.
By registering all shards atomically, this should solve the above
problems because we will always have statuses for all shards.
Fixesscylladb/scylladb#22989
The latter is recommended in seastar, and the former was left as
compatibility alias. Latest seastar explicitly marks it as deprecated so
once the submodule is updated, compilation logs will explode.
Most of the patch is generated with
for f in $(git grep -l '\<distributed<[A-Za-z0-9:_]*>') ; do sed -e 's/\<distributed<\([A-Za-z0-9:_]*\)>/sharded<\1>/g' -i $f; done
for f in $(git grep -l distributed.hh); do sed -e 's/distributed.hh/sharded.hh/' -i $f ; done
and a small manual change in test/perf/perf.hh
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26136
This commit extends sytem.scylla_local table with an additional
key/value pair that can be used later in this patch series to
keep an information that `sl:driver` was already created. The purpose
of storing this information is to ensure that `sl:driver` is
not recreated after being intentionally removed.
A new mutation is included in `register_raft_pull_snapshot` to keep
`service_level_driver_created` in state machine shapshot, which is
required for proper propagation of the value when a new node is added
to the cluster.
Refs: scylladb/scylladb#24411
Add new group0-based tables in system keyspace to be used for cdc with tablets:
* cdc_streams_state - describing "base" state of CDC streams for each
table - an initial timestamp and a stream set.
* cdc_streams_history - describing following committed stream sets by
diffs (opened / closed streams) from the previous set.
As requested in #22120, moved the files and fixed other includes and build system.
Moved files:
- query.cc
- query-request.hh
- query-result.hh
- query-result-reader.hh
- query-result-set.cc
- query-result-set.hh
- query-result-writer.hh
- query_id.hh
- query_result_merger.hh
Fixes: #22120
This is a cleanup, no need to backport
Closesscylladb/scylladb#25105
This change disables caching for raft log table due to the following reasons:
* Immediate reason is a deficiency in handling emerging range tombstones in the cache, which causes stalls.
* Long-term reason is that sequential reads from the raft log do not benefit from the cache, making it better to bypass it to free up space and avoid stalls.
Fixesscylladb/scylladb#26027Closesscylladb/scylladb#26031
Fixes#25683
Once a table drop is complete, there should be no reason to retain
truncation records for it, as any replay should skip mutations
anyway (no CF), and iff we somehow resurrect a dropped table,
this replay-resurrected data is the least problem anyway.
Adds a prune phase to the startup drop_truncation_rp_records run,
which ignores updating, and instead deletes records for non-existant
tables (which should patch any existing servers with lingering data
as well).
Also does an explicit delete of records on actual table DROP, to
ensure we don't grow this table more than needed even in long
uptime nodes.
Small unit test included.
Closesscylladb/scylladb#25699
The gossiper can call `storage_service::on_change` frequently (see scylladb/scylla-enterprise#5613), which may cause high CPU load and even trigger OOMs or related issues.
This PR adds a temporary cache for `system.peers` to resolve host_id -> ip without hitting storage on every call. The cache is short-lived to handle the unlikely case where `system.peers` is updated directly via CQL.
This is a temporary fix; a more thorough solution is tracked in https://github.com/scylladb/scylladb/issues/25620.
Fixesscylladb/scylladb#25660
backport: this patch needs to be backported to all supported versions (2025.1/2/3).
Closesscylladb/scylladb#25658
* github.com:scylladb/scylladb:
storage_service: move get_host_id_to_ip_map to system_keyspace
system_keyspace: use peers cache in get_ip_from_peers_table
storage_service: move get_ip_from_peers_table to system_keyspace
This patch introduces `view_building_coordinator`, a single entity within whole cluster responsible for building tablet-based views.
The view building coordinator takes slightly different approach than the existing node-local view builder. The whole process is split into smaller view building tasks, one per each tablet replica of the base table.
The coordinator builds one base table at a time and it can choose another when all views of currently processing base table are built.
The tasks are started by setting `STARTED` state and they are executed by node-local view building worker. The tasks are scheduled in a way, that each shard processes only one tablet at a time (multiple tasks can be started for a shard on a node because a table can have multiple views but then all tasks have the same base table and tablet (last_token)). Once the coordinator starts the tasks, it sends `work_on_view_building_tasks` RPC to start the tasks and receive their results.
This RPC is resilient to RPC failure or raft leader change, meaning if one RPC call started a batch of tasks but then failed (for instance the raft leader was changed and caller aborted waiting for the response), next RPC call will attach itself to the already started batch.
The coordinator plugs into handling tablet operations (migration/resize/RF change) and adjusts its tasks accordingly. At the start of each tablet operation, the coordinator aborts necessary view building tasks to prevent https://github.com/scylladb/scylladb/issues/21564. Then, new adjusted tasks are created at the end of the operation.
If the operation fails at any moment, aborted tasks are rollback.
The view building coordinator can also handle staging sstables using process_staging view building tasks. We do this because we don't want to start generating view updates from a staging sstable prematurely, before the writes are directed to the new replica (https://github.com/scylladb/scylladb/issues/19149).
For detailed description check: `docs/dev/view-building-coordinator.md`
Fixes https://github.com/scylladb/scylladb/issues/22288
Fixes https://github.com/scylladb/scylladb/issues/19149
Fixes https://github.com/scylladb/scylladb/issues/21564
Fixes https://github.com/scylladb/scylladb/issues/17603
Fixes https://github.com/scylladb/scylladb/issues/22586
Fixes https://github.com/scylladb/scylladb/issues/18826
Fixes https://github.com/scylladb/scylladb/issues/23930
---
This PR is reimplementation of https://github.com/scylladb/scylladb/pull/21942Closesscylladb/scylladb#23760
* github.com:scylladb/scylladb:
test/cluster: add view build status tests
test/cluster: add view building coordinator tests
utils/error_injection: allow to abort `injection_handler::wait_for_message()`
test: adjust existing tests
utils/error_injection: add injection with `sleep_abortable()`
db/view/view_builder: ignore `no_such_keyspace` exception
docs/dev: add view building coordinator documentation
db/view/view_building_worker: work on `process_staging` tasks
db/view/view_building_worker: register staging sstable to view building coordinator when needed
db/view/view_building_worker: discover staging sstables
db/view/view_building_worker: add method to register staging sstable
db/view/view_update_generator: add method to process staging sstables instantly
db/view/view_update_generator: extract generating updates from staging sstables to a method
db/view/view_update_generator: ignore tablet-based sstables
db/view/view_building_coordinator: update view build status on node join/left
db/view/view_building_coordinator: handle tablet operations
db/view: add view building task mutation builder
service/topology_coordinator: run view building coordinator
db/view: introduce `view_building_coordinator`
db/view/view_building_worker: update built views locally
db/view: introduce `view_building_worker`
db/view: extract common view building functionalities
db/view: prepare to create abstract `view_consumer`
message/messaging_service: add `work_on_view_building_tasks` RPC
service/topology_coordinator: make `term_changed_error` public
db/schema_tables: create/cleanup tasks when an index is created/dropped
service/migration_manager: cleanup view building state on drop keyspace
service/migration_manager: cleanup view building state on drop view
service/migration_manager: create view building tasks on create view
test/boost: enable proxy remote in some tests
service/migration_manager: pass `storage_proxy` to `prepare_keyspace_drop_announcement()`
service/migration_manager: coroutinize `prepare_new_view_announcement()`
service/storage_proxy: expose references to `system_keyspace` and `view_building_state_machine`
service: reload `view_building_state_machine` on group0 apply()
service/vb_coordinator: add currently processing base
db/system_keyspace: move `get_scylla_local_mutation()` up
db/system_keyspace: add `view_building_tasks` table
db/view: add view_building_state and views_state
db/system_keyspace: add method to get view build status map
db/view: extract `system.view_build_status_v2` cql statements to system_keyspace
db/system_keyspace: move `internal_system_query_state()` function earlier
db/view: ignore tablet-based views in `view_builder`
gms/feature_service: add VIEW_BUILDING_COORDINATOR feature
Reimplemented the function to use the peers cache. It could be replaced
with get_ip_from_peers_table, but that would create a coroutine frame for
each call.
The storage_service::on_change method can be called quite often
by the gossiper, see scylladb/scylla-enterprise#5613. In this commit
we introduce a temporal cache for system.peers so that we don't have
to go to the storage each time we need to resolve host_id -> ip.
We keep the cache only for a small amount of time to handle the
(unlikely) scenario when the user wants to update system.peers table
from CQL.
Fixesscylladb/scylladb#25660
We plan to add a cache to get_ip_from_peers_table in upcoming commits.
It's more convenient to do this from system_keyspace, since the only two
methods that mutate system.peers (remove_endpoint and update_peers_info)
are already there.
Fixes#25682
Refs scylla-enterprise#5580
If the truncation table is large in entries, we might create a
huge parallel execution, quite possibly consuming loads of resources
doing something quite trivial.
Limit concurrency to a small-ish number
Closesscylladb/scylladb#25678
The view building coordinator will be building all views
of one base table at a time.
Select first available base table as currently processing base
and save this information to `system.scylla_local`.
Until now, all changes to `system.view_build_status_v2` were made from
view.cc and the file contained all of the helper methods.
This commit introduces a `build_status` enum class to avoid using
hardcoded strings and extracts the helper methods to `system_keyspace`
class, so they can be later used by the view building coordinator.
The following steps are performed in sequence as part of the
Raft-based recovery procedure:
- set `recovery_leader` to the host ID of the recovery leader in
`scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- perform a rolling restart (with the recovery leader being restarted
first).
These steps are not intuitive and more complicated than they could be.
In this PR, we simplify these steps. From now on, we will be able to
simply set `recovery_leader` on each node just before restarting it.
Apart from making necessary changes in the code, we also update all
tests of the Raft-based recovery procedure and the user-facing
documentation.
Fixesscylladb/scylladb#25015
The Raft-based procedure was added in 2025.2. This PR makes the
procedure simpler and less error-prone, so it should be backported
to 2025.2 and 2025.3.
Closesscylladb/scylladb#25032
* github.com:scylladb/scylladb:
docs: document the option to set recovery_leader later
test: delay setting recovery_leader in the recovery procedure tests
gossip: add recovery_leader to gossip_digest_syn
db: system_keyspace: peers_table_read_fixup: remove rows with null host_id
db/config, gms/gossiper: change recovery_leader to UUID
db/config, utils: allow using UUID as a config option
Currently, `peers_table_read_fixup` removes rows with no `host_id`, but
not with null `host_id`. Null host IDs are known to appear in system
tables, for example in `system.cluster_status` after a failed bootstrap.
We better make sure we handle them properly if they ever appear in
`system.peers`.
This commit guarantees that null UUID cannot belong to
`loaded_endpoints` in `storage_service::join_cluster`, which in
particular ensures that we throw a runtime error when a user sets
`recovery_leader` to null UUID during the recovery procedure. This is
handled by the code verifying that `recovery_leader` belongs to
`loaded_endpoints`.
Allow applying writes in the form of mutations directly to the keyspace.
Allows lower-level mutation API to build writes. Advantageous if writes
can contain large cells that would otherwise possibly cause large
allocation warnings if used via the internal CQL API.
To serve as a place to store corrupt mutation fragments. These fragments
cannot be written to sstables, as they would be spread around by
compaction and/or repair. They even might make parsing the sstable
impossible. So they are stored in this special table instead, kept
around to be inspected later and possibly restored if possible.
Requests, together with their parameters, are added to the
topology_request tables and the queue of active global requests is
kept in topology state. Thy are processed one by one by the topology
state machine.
Fixes: #16822
topology_request table has a filed to hold a request type, but
currently it can hold only per node requests. This patch makes it
possible to store global request types there as well.
Currently parameters to alter table global topology command are stored
in static column in the topology table, but this way there can be only one
outstanding alter table request. This patch moves the parameters to
the topology_request table where parameters are stored per request.
Currently, the `system.compaction_history` table miss information like the type of compaction (cleanup, major, resharding, etc), the sstable generations involved (in and out), shard's id the compaction was triggered on and statistics on purged tombstones to be collected during compaction.
The series extends the table with the following columns:
- "compaction_type" (text)
- "shard_id" (int)
- "sstables_in" (list<sstableinfo_type>)
- "sstables_out" (list<sstableinfo_type>)
- "total_tombstone_purge_attempt" (long)
- "total_tombstone_purge_failure_due_to_overlapping_with_memtable" (long)
- "total_tombstone_purge_failure_due_to_overlapping_with_uncompacting_sstable" (long)
with a user defined type `sstableinfo_type` that holds the information about sstable file
- generation (uuid)
- origin (text)
- size (long)
Additional statistics stored in the compaction_history have been incorporated in the API `/compaction_manager/compaction_history` and the `nodetool compactionhistory` command.
No backport is required. It extends the existing compaction history output.
Fixes https://github.com/scylladb/scylladb/issues/3791Closesscylladb/scylladb#21288
* github.com:scylladb/scylladb:
nodetool: Refactor of compactionhistory_operation
nodetool: Add more stats into compactionhistory output
api/compaction_manager: Extend compaction_history api
compaction: Collect tombstone purge stats during compaction
compacting_reader: Extend to accept tombstone purge statistics
mutation_compactor: Collect tombstone purge attempts
compaction_garbage_collector: Extend return type of max_purgeable_fn
compaction: Extend compaction_result to collect more information
system_keyspace: Upgrade compaction_history table
system_keyspace: Create UDT: sstableinfo_type
system_keyspace: Extract compaction_history struct
system_keyspace: Squeeze update_compaction_history parameters
compaction/compaction_manager: update_history accepts compaction_result as rvalue
Blobs can be large, and unfragmented blobs can easily exceed 128k
(as seen in #23903). Rename get_blob() to get_blob_unfragmented()
to warn users.
Note that most uses are fine as the blobs are really short strings.
Closesscylladb/scylladb#24102
Currently, the system.compaction_history table miss precious
information like the type of compaction (cleanup, major, resharding,
etc) or the sstable generations involved (in and out) used countless
times to diagnose issues.
Thus, the commit extend the current definition of the table by adding
the following columns:
+ "compaction_type" (text)
+ "started_at" (int)
+ "shard_id" (int)
+ "sstables_in" (list<sstableinfo_type>)
+ "sstables_out" (list<sstableinfo_type>)
+ "total_tombstone_purge_attempt" (long)
+ "total_tombstone_purge_failure_due_to_overlapping_with_memtable" (long)
+ "total_tombstone_purge_failure_due_to_overlapping_with_uncompacting_sstable" (long)
Furthermore, the commit introduces a new feature flag in order to
prevent nodes from writing data to new columns when a cluster is
not fully upgraded.
The new user defined type holds the following information on sstable:
+ generation uuid;
+ origin text;
+ size long;
and will be used by the system.compaction_history table to keep
track of compacted files and the files being the result of this
compaction.
