We want to start tracking the memory consumption of mutation fragments.
For this we need schema and permit during construction, and on each
modification, so the memory consumption can be recalculated and pass to
the permit.
In this patch we just add the new parameters and go through the insane
churn of updating all call sites. They will be used in the next patch.
Not used yet, this patch does all the churn of propagating a permit
to each impl.
In the next patch we will use it to track to track the memory
consumption of `_buffer`.
... and tests. Printin a pointer in logs is considered to be a bad practice,
so the proposal is to keep this explicit (with fmt::ptr) and allow it for
.debug and .trace cases.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Showing raw pointer values in logs is not considered to be good
practice. However, for debugging/tracing this might be helpful.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There are 4 places that call this helper:
- storage proxy. Callers are rpc verb handlers and already have the proxy
at hands from which they can get the messaging service instance
- repair. There's local-global messaging instance at hands, and the caller
is in verb handler too
- streaming. The caller is verb handler, which is unregistered on stop, so
the messaging service instance can be captured
- migration manager itself. The caller already uses "this", so the messaging
service instance can be get from it
The better approach would be to make get_schema_definition be the method of
migration_manager, but the manager is stopped for real on shutdown, thus
referencing it from the callers might not be safe and needs revisiting. At
the same time the messaging service is always alive, so using its reference
is safe.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Streaming uses messaging, init it with itw own reference.
Nowadays the whole streaming subsystem uses global static references on the
needed services. This is not nice, but still better than just using code-wide
globals, so treat the messaging service here the same way.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
In some cases estimated number of partitions can be 0, which is albeit a
legit estimation result, breaks many low-level sstable writer code, so
some of these have assertions to ensure estimated partitions is > 0.
To avoid hitting this assert all users of the sstable writers do the
clamping, to ensure estimated partitions is at least 1. However leaving
this to the callers is error prone as #6913 has shown it. As this
clamping is standard practice, it is better to do it in the writers
themselves, avoiding this problem altogether. This is exactly what this
patch does. It also adds two unit tests, one that reproduces the crash
in #6913, and another one that ensures all sstable writers are fine with
estimated partitions being 0 now. Call sites previously doing the
clamping are changed to not do it, it is unnecessary now as the writer
does it itself.
Fixes#6913
Tests: unit(dev)
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <20200724120227.267184-1-bdenes@scylladb.com>
5 services register handlers in messaging, but not all of them
have clear unregistration methods.
Summary:
migration_manager: everything is in place, no changes
gossiper: ditto
proxy: some verbs unregistration is missing
repair: no unregistration at all
streaming: ditto
This patch adds the needed unregistration methods.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Before Scylla 3.0, we used to send streaming mutations using
individual RPC requests and flush them together using dedicated
streaming memtables. This mechanism is no longer in use and all
versions that use it have long reached end-of-life.
Remove this code.
Streaming is handled by just once group for CPU scheduling, so
separating it into read and write classes for I/O is artificial, and
inflates the resources we allow for streaming if both reads and writes
happen at the same time.
Merge both classes into one class ("streaming") and adjust callers. The
merged class has 200 shares, so it reduces streaming bandwidth if both
directions are active at the same time (which is rare; I think it only
happens in view building).
There's a static global instance of needed services and helpers
for it in streaming code. This is not great to use them, but at
least this change unifies different pieces of streaming code and
removes the storage_service.hh from streaming_session.cc (the
streaming_sessio.hh doesn't include it either).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This is continuation of ac998e95 -- the sched group is
switched by messaging service for a verb, no need to do
it by hands.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The sstable_writer_config creation looks simple (just declare
the struct instance) but behind the scenes references storage
and feature services, messes with database config, etc.
This patch teaches the sstables_manager generate the writer
config and makes the rest of the code use it. For future
safety by-hands creation of the sstable_writer_config is
prohibited.
The manager is referenced through table-s and sstable-s, but
two existing sstables_managers live on database object, and
table-s and sstable-s both live shorter than the database,
this reference is save.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Currently when an error happens during the receive and distribute phase
it is swallowed and we just return a -1 status to the remote. We only
log errors that happen during responding with the status. This means
that when streaming fails, we only know that something went wrong, but
the node on which the failure happened doesn't log anything.
Fix by also logging errors happening in the receive and distribute
phase. Also mention the phase in which the error happened in both error
log messages.
Refs: #4901
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <20190903115735.49915-1-bdenes@scylladb.com>
This patches silences the remaining discarded future warnings, those
where it cannot be determined with reasonable confidence that this was
indeed the actual intent of the author, or that the discarding of the
future could lead to problems. For all those places a FIXME is added,
with the intent that these will be soon followed-up with an actual fix.
I deliberately haven't fixed any of these, even if the fix seems
trivial. It is too easy to overlook a bad fix mixed in with so many
mechanical changes.
Avoid including the lengthy stream_session.hh in messaging_service.
More importantly, fix the build because currently messaging_service.cc
and messaging_service.hh does not include stream_mutation_fragments_cmd.
I am not sure why it builds on my machine. Spotted this when backporting
the "streaming: Send error code from the sender to receiver" to 3.0
branch.
Refs: #4789
In case of error on the sender side, the sender does not propagate the
error to the receiver. The sender will close the stream. As a result,
the receiver will get nullopt from the source in
get_next_mutation_fragment and pass mutation_fragment_opt with no value
to the generating_reader. In turn, the generating_reader generates end
of stream. However, the last element that the generating_reader has
generated can be any type of mutation_fragment. This makes the sstable
that consumes the generating_reader violates the mutation_fragment
stream rule.
To fix, we need to propagate the error. However RPC streaming does not
support propagate the error in the framework. User has to send an error
code explicitly.
Fixes: #4789
Currently there is a single mutation_writer: `multishard_writer`,
however in the next path we are going to add another one. This is the
right moment to move these into a common namespace (and folder), we
have way too much stuff scattered already in the top-level namespace
(and folder).
Also rename `tests/multishard_writer_test.cc` to
`tests/mutation_writer_test.cc`, this test-suite will be the home of all
the different mutation writer's unit test cases.
They are of type db::system_distributed_keyspace and
db::view::view_update_generator.
n1 is in normal status
n2 boots up and _sys_dist_ks or _view_update_generator are not
initialized
n1 runs stream, n2 is the follower.
n2 uses the _sys_dist_ks or _view_update_generator
"Assertion `local_is_initialized()' failed" is observed
Fixes#4360
Message-Id: <4ae13e1640ac8707a9ba0503a2744f6faf89ecf4.1554330030.git.asias@scylladb.com>
There is no guarantee that rpc streaming makes progress in some time
period. Remove the keep alive timer in streaming to avoid killing the
session when the rpc streaming is just slow.
The keep alive timer is used to close the session in the following case:
n2 (the rpc streaming sender) streams to n1 (the rpc streaming receiver)
kill -9 n2
We need this because we do not kill the session when gossip think a node
is down, because we think the node down might only be temporary
and it is a waste to drop the previous work that has done especially
when the stream session takes long time.
Since in range_streamer, we do not stream all data in a single stream
session, we stream 10% of the data per time, and we have retry logic.
I think it is fine to kill a stream session when gossip thinks a node is
down. This patch changes to close all stream session with the node that
gossip think it is down.
Message-Id: <bdbb9486a533eee25fcaf4a23a946629ba946537.1551773823.git.asias@scylladb.com>
"
This series adds generating view updates from sstables added through
/upload directory if their tables have accompanying materialized views.
Said sstables are left in /upload directory until updates are generated
from them and are treated just like staging sstables from /staging dir.
If there are no views for a given tables, sstables are simply moved
from /upload dir to datadir without any changes.
Tests: unit (release)
"
* 'add_handling_staging_sstables_to_upload_dir_5' of https://github.com/psarna/scylla:
all: rename view_update_from_staging_generator
distributed_loader: fix indentation
service: add generating view updates from uploaded sstables
init: pass view update generator to storage service
sstables: treat sstables in upload dir as needing view build
sstables,table: rename is_staging to requires_view_building
distributed_loader: use proper directory for opening SSTable
db,view: make throttling optional for view_update_generator
Replace stdx::optional and stdx::string_view with the C++ std
counterparts.
Some instances of boost::variant were also replaced with std::variant,
namely those that called seastar::visit.
Scylla now requires GCC 8 to compile.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20190108111141.5369-1-duarte@scylladb.com>
This header, which is easily replaced with a forward declaration,
introduces a dependency on database.hh everywhere. Remove it and scatter
includes of database.hh in source files that really need it.
Checking if view update path should be used for sstables
is going to be reused in row level repair code,
so relevant functions are moved to a separate header.
When streaming, sstables for which we need to generate view updates
are placed in a special staging directory. However, we only need to do
this for tables that actually have views.
Refs #4021
Message-Id: <20181227215412.5632-1-duarte@scylladb.com>
When creating a sstable from which to generate view updates, we held
on to a table reference across defer points. In case there's a
concurrent schema drop, the table object might be destroyed and we
will incur in a use-after-free. Solve this by holding on to a shared
pointer and pinning the table object.
Refs #4021
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20181227105921.3601-1-duarte@scylladb.com>
Move generating_reader from stream_session.cc to flat_mutation_reader.cc.
It will be used by repair code soon.
Also introduce a helper make_generating_reader to hide the
implementation of generating_reader.
System tables will never need view building, and, what's more,
are actually used in the process of view build checking.
So, checking whether system tables need a view update path
is simplified to returning 'false'.
* seastar d59fcef...b924495 (2):
> build: Fix protobuf generation rules
> Merge "Restructure files" from Jesse
Includes fixup patch from Jesse:
"
Update Seastar `#include`s to reflect restructure
All Seastar header files are now prefixed with "seastar" and the
configure script reflects the new locations of files.
Signed-off-by: Jesse Haber-Kucharsky <jhaberku@scylladb.com>
Message-Id: <5d22d964a7735696fb6bb7606ed88f35dde31413.1542731639.git.jhaberku@scylladb.com>
"
While streaming to a table with paired views, staging sstables
are used. After the table is written to disk, it's used to generate
all required view updates. It's also resistant to restarts as it's
stored on a hard drive in staging/ directory.
Refs #3275
sprint() recently became more strict, throwing on sprint("%s", 5). Replace
with the more modern format().
Mechanically converted with https://github.com/avikivity/unsprint.
On receiving a mutation_fragment or a mutation triggered by a streaming
operation, we pass an enum stream_reason to notify the receiver what
the streaming is used for. So the receiver can decide further operation,
e.g., send view updates, beyond applying the streaming data on disk.
Fixes#3276
Message-Id: <f15ebcdee25e87a033dcdd066770114a499881c0.1539498866.git.asias@scylladb.com>
'Consumer function' parameter for distribute_reader_and_consume_on_shards()
captures schema_ptr (which is a seastar::shared_ptr), but the function
is later copied on another shard at which point schema_ptr is also copied
and its counter is incremented by the wrong shard. The capture is not
even used, so lets just drop it.
Fixes#3838
Message-Id: <20181011075500.GN14449@scylladb.com>
