We found that --clang-build-mode INSTALL_FROM tries to rebuild clang
even we use an archive of prebuilt image.
Seems like it is because ninja detected changes on standard library
headers, which updated when we build new frozen toolchain container
image.
To avoid such unnecessary rebuild, we should stop archive whole clang
build directory, we should archive install image instead.
To do so, we can use
"DESTDIR=<sysroot dir> ninja install-distribution-stripped", and archive
sysroot dir as clang archive.
Fixes#20421Closesscylladb/scylladb#20422
Add for both x86_64 compilation flags for clang, to get it compile with newer arch x86_64-v3 for x86 and ARM 8.2 level for aarch64.
Tested to compile fine with both clang 18.1.6 and 18.1.8.
Signed-off-by: Yaniv Kaul <yaniv.kaul@scylladb.com>
Closesscylladb/scylladb#20682
* tools/java e505a6d3bb...5b0e274f12 (1):
> Merge 'build.xml: install and use java-11 when building' from Kefu Chai
Updates to clang 18.1.8 + LLVM patch to match Fedora 40.
New optimized clang build generated and stored in
https://devpkg.scylladb.com/clang/clang-18.1.8-x86_64.tar.gzhttps://devpkg.scylladb.com/clang/clang-18.1.8-aarch64.tar.gz
Due to the loss of the jmx submodule, we no longer install java-11-openjdk.
We add it in install-dependencies.sh here to compensate, pending a better
solution.
tools/java submodule updated to remove build failure where Java 8
was selected instead of Java 11.
The scylla_gdb test suite was disabled due to a regression in gdb 15,
which is brought in by the toolchain update [1].
[1] https://github.com/scylladb/scylladb/issues/20741.
This PR adds the possibility to gather resource consumption metrics. The collected metrics can be used to compare performance before and after specific changes aimed at increasing performance. Currently, this functionality works only in manual mode, and this is just raw data. Later on, these metrics can be used in Jupyter notebook to analyze and visualize how the resources are used and can provide the insight on how to improve it. This PR is a first insight after gathering these metrics.
Add the possibility to gather resource consumption for the test.py execution. SQLite DB will be created with different performance metrics that will allow comparing the resource consumption between changes.
The DB will be in the tmp directory that by default set to testlog. Across the runs, the DB will not be deleted, so each new run will just add information to the existing DB.
Parameter --get-metrics was added to switch on or off the metrics gathering. By default, it's switched on.
Closes: scylladb/qa-tasks#1666Closes: scylladb/qa-tasks#1707Closesscylladb/scylladb#19881
When we introduced optimized clang at 6e487a4, we dropped multiarch build on frozen toolchain, because building clang on QEMU emulation is too heavy.
Actually, even after the patch merged, there are two mode which does not build clang, --clang-build-mode INSTALL_FROM and --clang-build-mode SKIP.
So we should restore multiarch build only these mode, and keep skipping on INSTALL mode since it builds clang.
Since we apply multiarch on INSTALL_FROM mode, --clang-archive replaced
to --clang-archive-x86_64 and --clang-archive-aarch64.
Note that this breaks compatibility of existing clang archive, since it
changes clang root directory name from llvm-project to llvm-project-$ARCH.
Closes#20442Closesscylladb/scylladb#20444
Check if podman is available before docker. If it is, use it. Otherwise, check for docker.
1. Podman is better. It runs with fewer resources, and I've had display issues with Docker (output was not shown consistently)
2. 'which docker' works even when the docker service and socket are turned off.
Signed-off-by: Yaniv Kaul <yaniv.kaul@scylladb.com>
Closesscylladb/scylladb#20342
in 947e2814, we pass `--tty` as long as we are using podman _or_
we are in interactive mode. but if we build the tree using podman
using jenkins, we are seeing that ninja is displaying the output
as if it's in an interactive mode. and the output includes ASCII
escape codes. this is distracting.
the reason is that we
* are using podman, and
* ninja tells if it should displaying with a "smart" terminal by
checking istty() and the "TERM" environmental variable.
so, in this change, we add --tty only if
* we are in the interactive mode.
* or stdin is associated with a terminal. this is the use case
where user uses dbuild to interactively build scylla
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20196
Previously optimized clang installation was not used standard build
script, it overwrites preinstalled Fedora's clang binaries instead.
However this breaks on clang-18.1.8, since libLTO versioning convention.
To avoid such problem, let's switch to standard installation method and
swith install prefix to /usr/local.
Fixes#19203Closesscylladb/scylladb#19505
podman does not allocate a tty by default, so without `-t` or `--tty`,
one cannot use a functional terminal when interacting with the
container. that what one can expect when running `dbuild -i --`, and
we are greeted with :
```
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
```
after this change, one can enjoy the good-old terminal as usual
after being dropped to the container provided by `dbuild -i --`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#19550
Add allure-pytest pip dependency to be able to use it for generating the allure report later.
Main benefits of the allure report:
1. Group test failures
2. Possibility to attach log files to she test itself
3. Timeline of test run
4. Test description on the report
5. Search by test name or tag
[avi: regenerate toolchain]
Closesscylladb/scylladb#19335
On be3776ec2a, we changed outdir to
absolute path.
This causes "unknown target" error when we build Scylla using the relative
path something like "ninja build/dev/scylla", since the target name
become absolte path.
Revert the change to able to build with the relative path.
Also, change optimized_clang.sh to use relative path for --builddir,
since we reference "../../$builddir/SCYLLA-*-FILE" when we build
submodule, it won't work with absolute path.
Fixes#18321Closesscylladb/scylladb#18338
This is a different way attempting to combine building an optimized clang (using LTO, PGO and BOLT, based on compiling ScyllaDB) to dbuild. Per Avi's request, there are 3 options: skip this phase (which is the current default), build it and build + install it to the default path.
Fixes: #10985Fixes: scylladb/scylla-enterprise#2539
before this change, if `buildah` is not available in $PATH, this script
fails like:
```console
$ tools/toolchain/prepare --help
tools/toolchain/prepare: line 3: buildah: command not found
```
the error message never gets a chance to show up. as `set -e` in the
shebang line just let bash quit.
after this change, we check for the existence of buildah, and bail out
if it is not available. so, on a machine without buildah around, we now
have:
```console
$ tools/toolchain/prepare --help
install buildah 1.19.3 or later
```
the same applies to "reg".
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#17697
As part of code coverage we need some additional packages in order to
being able to process the code coverage data and being able to provide
some meaningful information in logs.
Here we add the following packages:
fedora packages:
----------------
lcov - A package of utilities to manipulate lcov traces and generate
coverage html reports
fedora python3 packages:
------------------------
The following packages are added into fedora_packages and not the
python3_packages since we don't need them to be packaged into
scylla-python3 package but we only require them for the build
environment.
python3-unidiff - A python library for working with patch files, this is
required in order to generate "patch coverage" reports.
python3-humanfriendly - A python library to format some quantities into
a human readable strings (time spans, sizes, etc...)
we use it to print meaningful logs that tracks
the volume and time it takes to process coverage
data so we can better debug and optimize it in the
future.
python3-jinja3 - This is a template based generator that will eventually
will allow to consolidate and rearrange several reports into one so we
can publish a single report "site" for all of the coverage information.
For example, include both, coverage report as well as
patch report in a tab based site.
pip packages:
-------------
treelib - A tree data structure that supports also pretty printing of
the tree data. We use it to log the coverage processing steps in
order to have debugging capabilities in the future.
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Closesscylladb/scylladb#16330
[avi: regenerate toolchain]
Closesscylladb/scylladb#16357
Update node_exporter to 1.7.0.
The previous version (1.6.1) was flagged by security scanners (such as
Trivy) with HIGH-severity CVE-2023-39325. 1.7.0 release fixed that
problem.
[Botond: regenerate frozen toolchain]
Fixes#16085Closesscylladb/scylladb#16086Closesscylladb/scylladb#16090
* seastar 576ee47d...bab1625c (13):
> build: s/{dpdk_libs}/${dpdk_libs}/
> build: build with dpdk v23.07
> scripts: Fix escaping of regexes in addr2line
> linux-aio: print more specific error when setup_aio fails
> linux-aio: correct the error message raised when io_setup() fails
> build: reenable -Warray-bound compiling option
> build: error out if find_program() fails
> build: enable systemtap only if it is available
> build: check if libucontext is necessary for using ucontext functions
> smp: reference correct variable when fetch_or()
> build: use target_compile_definitions() for adding -D...
> http/client: pass tls_options to tls::connect()
> Merge 'build, process: avoid using stdout or stderr as C++ identifiers' from Kefu Chai
Frozen toolchain regenerated for new Seastar depdendencies.
configure.py adjusted for new Seastar arch names.
Closesscylladb/scylladb#15476
The docker/podman tooling is destructive: it will happily
overwrite images locally and on the server. If a maintainer
forgets to update tools/toolchain/image, this can result
in losing an older toolchain container image.
To prevent that, check that the image name is new.
Closesscylladb/scylladb#15397
instead of fabricating a `/etc/password` manually, we can just
leave it to podman to add an entry in `/etc/password` in container.
as podman allows us to map user's account to the same UID in the
container. see
https://docs.podman.io/en/stable/markdown/options/userns.container.html.
this is not only a cosmetic change, it also avoid the permission denied
failure when accessing `/etc/passwd` in the container when selinux is
enabled. without this change, we would otherwise need to either add the
selinux lable to the bind volume with ':Z' option address the failure
like:
```
type=AVC msg=audit(1693449115.261:2599): avc: denied { open } for pid=2298247 comm="bash" path="/etc/passwd" dev="tmpfs" ino=5931 scontext=system_u:system_r:container_t:s0:c252,c259 tcontext=unconfined_u:object_r:user_tmp_t:s0 tclass=file permissive=0
type=AVC msg=audit(1693449115.263:2600): avc: denied { open } for pid=2298249 comm="id" path="/etc/passwd" dev="tmpfs" ino=5931 scontext=system_u:system_r:container_t:s0:c252,c259 tcontext=unconfined_u:object_r:user_tmp_t:s0 tclass=file permissive=0
```
found in `/var/log/audit/audit.log`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#15230
This refreshes clang to 16.0.6 and libstdc++ to 13.1.1.
compiler-rt, libasan, and libubsan are added to install-dependencies.sh
since they are no longer pulled in as depdendencies.
Closes#13730
After the addition of the rust-std-static-wasm32-wasi target, we're
able to compile the Rust programs to Wasm binaries. However, we're still
only able to handle the Wasm UDFs in the Text format, so we need a tool
to translate the .wasm files to .wat. Additionally, the .wasm files
generated by default are unnecessarily large, which can be helped
using wasm-opt and wasm-strip.
The tool for translating wasm to wat (wasm2wat), and the tool for
stripping the wasm binaries (wasm-strip) are included in the `wabt`
package, and the optimization tool (wasm-opt) is included in the
`binaryen` package. Both packages are added to install-dependencies.sh
Closes#13282
[avi: regenerate frozen toolchain]
Closes#13605
In the future, when testing WASM UDFs, we will only store the Rust
source codes of them, and compile them to WASM. To be able to
do that, we need rust standard library for the wasm32-wasi target,
which is available as an RPM called rust-std-static-wasm32-wasi.
Closes#12896
[avi: regenerate toolchain]
Closes#13258
It will be needed by S3 driver to parse multipart-upload messages from
server
refs: #12523
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#13158
[avi: regenerate toolchain]
Closes#13192
These two are static binaries, so no need in yum/apt-installing them with dependencies.
Just download with curl and put them into /urs/local/bin with X-bit set.
This is needed for future object-storage work in order to run unit tests against minio.
refs: #12523
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
[avi: regenerate frozen toolchain]
Closes#13064Closes#13099
to replace tabs with spaces, for better readability if the editor
fails to render tabs with the right tabstop setting.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#12839
The leak sanitizer has a bug [1] where, if it detects a leak, it
forks something, and before that, it closes all files (instead of
using close_range like a good citizen).
Docker tends to create containers with the NOFILE limit (number of
open files) set to 1 billion.
The resulting 1 billion close() system calls is incredibly slow.
Work around that problem by passing the host NOFILE limit.
[1] https://github.com/llvm/llvm-project/issues/59112Closes#12638
The dbuild README has an example how to enable ccache, and required
modifying the PATH. Since recently, our docker image includes
required commands (cxxbridge) in /usr/local/bin, so the build will
fail if that directory isn't also in the path - so add it in the
example.
Also use the opportunity to fix the "/home/nyh" in one example to
"$HOME".
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#12631
This series adds the implementation and usage of rust wasmtime bindings.
The WASM UDFs introduced by this patch are interruptable and use memory allocated using the seastar allocator.
This series includes #11102 (the first two commits) because #11102 required disabling wasm UDFs completely. This patch disables them in the middle of the series, and enables them again at the end.
After this patch, `libwasmtime.a` can be removed from the toolchain.
This patch also removes the workaround for #https://github.com/scylladb/scylladb/issues/9387 but it hasn't been tested with ARM yet - if the ARM test causes issues I'll revert this part of the change.
Closes#11351
* github.com:scylladb/scylladb:
build: remove references to unused c bindings of wasmtime
test: assert that WASM allocations can fail without crashing
wasm: limit memory allocated using mmap
wasm: add configuration options for instance cache and udf execution
test: check that wasmtime functions yield
wasm: use the new rust bindings of wasmtime
rust: add Wasmtime bindings
rust: add build profiles more aligned with ninja modes
rust: adjust build according to cxxbridge's recommendations
tools: toolchain: dbuild: prepare for sharing cargo cache
Rust's cargo caches downloaded sources in ~/.cargo. However dbuild
won't provide access to this directory since it's outside the source
directory.
Prepare for sharing the cargo cache between the host and the dbuild
environment by:
- Creating the cache if it doesn't already exist. This is likely if
the user only builds in a dbuild environment.
- Propagating the cache directory as a mounted volume.
- Respecting the CARGO_HOME override.
It's been a long while since we built ScyllaDB for s390x, and in
fact the last time I checked it was broken on the ragel parser
generator generating bad source files for the HTTP parser. So just
drop it from the list.
I kept s390x in the architecture mapping table since it's still valid.
Closes#12455
This lets us carry fewer things and rely on the distribution
for maintenance.
The frozen toolchain is updated. Incidental updates include clang 15.0.6,
and pytest that doesn't need workarounds.
Closes#12397
Now that our toolchain is based on Fedora 37, we can rely on its
libdeflate rather than have to carry our own in a submodule.
Frozen toolchain is regenerated. As a side effect clang is updated
from 15.0.0 to 15.0.4.
Closes#12000
