these unused includes were identifier by clang-include-cleaner. after
auditing these source files, all of the reports have been confirmed.
please note, because quite a few source files relied on
`utils/to_string.hh` to pull in the specialization of
`fmt::formatter<std::optional<T>>`, after removing
`#include <fmt/std.h>` from `utils/to_string.hh`, we have to
include `fmt/std.h` directly.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
In order to make sure that the scheduling group carries over RPC, and
also to prevent priority inversion issues between different service
levels, modify the messaging service to use separate RPC connections for
each service level in order to serve user traffic.
The above is achieved by reusing the existing concept of "tenants" in
messaging service: when a new service level (or, more accurately,
service-level specific scheduling group) is first used in an RPC, a
new tenant is created.
In addition, extend the service level controller to be able to quickly
look up the service level name of the currently active scheduling group
in order to speed up the logic for choosing the tenant.
This patch sets up an `alien_worker`, `advanced_rpc_compression::tracker`,
`dict_sampler` and `dictionary_service` in `main()`, and wires them to each other
and to `messaging_service`.
`messaging_service` compresses its network traffic with compressors managed by
the `advanced_rpc_compression::tracker`. All this traffic is passed as a single
merged "stream" through `dict_sampler`.
`dictionary_service` has access to `dict_sampler`.
On chosen nodes (by default: the Raft leader), it uses the sampler to maintain
a random multi-megabyte sample of the sampler's stream. Every several minutes,
it copies the sample, trains a compression dictionary on it (by calling zstd's
training library via the `alien_worker` thread) and publishes the new dictionary
to `system.dicts` via Raft.
This update triggers a callback into `advanced_rpc_compression::tracker` on all nodes,
which updates the dictionary used by the compressors it manages.
This "service" is a bag for code responsible for dictionary training,
created to unclutter main() from dictionary-specific logic.
It starts the RPC dictionary training loop when the relevant cluster feature is enabled,
pauses and unpauses it appropriately whenever relevant config or leadership
status are updated, and publishes new dictionaries whenever the training fiber produces them.
In commit bfee93c7, repair verbs were moved to IDL. During this refactoring,
the `gc_clock.hh` header became unused as its references were relocated.
`clang-include-cleaner` helped identify this unnecessary include, which is
now removed to clean up the codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21919
Store the endpoint ip address together with the client (note it may be
different from the address the client is connected to in case
preferable address is different). This allows up to drop lookup in the
address map which may eventually fail if an endpoint was already
deleted.
Fixes: scylladb/scylladb#21840
Message-ID: <Z1mpMMe-o0ggBU_F@scylladb.com>
"
The series moves node ops, repair and streaming verbs to IDL. Also
contains IDL related cleanups.
In addition to the CI tested manually by bootstrapping a node with the
series into a cluster of old nodes with repair and streaming both in
gossiper and raft mode. This exercises repair, streaming and node_ops
paths.
"
* 'gleb/move-more-rpcs-to-idl-v3' of github.com:scylladb/scylla-dev:
repair: repair_flush_hints_batchlog_request::target_nodes is not used any more, so mark it as such
streaming: move streaming verbs to IDL
messaging_service: move repair verbs to IDL
node_ops: move node_ops_cmd to IDL
idl: rename partition_checksum.dist.hh to repair.dist.hh
idl: move node_ops related stuff from the repair related IDL
This change introduces a new truncate_with_tablets RPC with a parameter
of type service::frozen_topology_guard. This is materialized on replica
nodes into a topology_guard which guarantees that truncate is performed
under a global session, which, in turn, makes sure that we don't execute
truncate as a result of stale RPCs.
Also, this RPC does not have a timeout. Timeout will be handled on the
coordinator side, and the truncate operation will not be allowed to time
out.
If an RPC client creation was triggered by send function that has host
id as a dst send it as part of CLIENT_ID RPC which is always the first
RPC on each connection. If receiver's host id does not match it will
drop the connection.
The function looks up provided host id in gossip_address_map and throws
unknown_address if the mapping is not available. Otherwise it sends the
message by IP found.
Mostly no functional changes here except in patch 3.
* 'gleb/cleanups' of github.com:scylladb/scylla-dev:
migration_manager: move migration manager verbs to the IDL
storage_proxy: remove unused function
storage_proxy: co-routinize handle_paxos_prepare
storage_proxy: co-routinise handle_paxos_prune
service: raft: no need to sync schema if the cluster is in raft topology mode
messaging_service: co-routinize messaging_service::stop_client
gossiper: rename apply_state_locally_without_listener_notification to apply_state_locally_in_shadow_round
Modernize the codebase by replacing Boost range adaptors with C++23 standard library views,
reducing external dependencies and leveraging modern C++ language features.
Key Changes:
- Replace `boost::adaptors::filtered` with `std::views::filter`
- Remove `#include <boost/range/adaptor/filtered.hpp>`
- Utilize standard library range views
Motivation:
- Reduce project's external dependency footprint
- Leverage standard library's range and view capabilities
- Improve long-term code maintainability
- Align with modern C++ best practices
Implementation Challenges and Considerations:
1. Range Conversion and Move Semantics
- `std::ranges::to` adaptor requires rvalue references
- Necessitated updates to variable and parameter constness
- Example: `cql3/restrictions/statement_restrictions.cc` modified to remove `const`
from `common` to enable efficient range conversion
2. Range Iteration and Mutation
- Range views may mutate internal state during iteration
- Cannot pass ranges by const reference in some scenarios
- Solution: Pass ranges by rvalue reference to explicitly indicate
state invalidation
Limitations:
- One instance of `boost::adaptors::filtered` temporarily preserved
due to lack of a C++23 alternative for `boost::join()`
- A comprehensive replacement will be addressed in a follow-up change
This change is part of our ongoing effort to modernize the codebase,
reducing external dependencies and adopting modern C++ practices.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21648
these unused includes are identified by clang-include-cleaner. after
auditing the source files, all of the reports have been confirmed.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Recently, seastar rpc started accepting std::type_identity in addition
to boost::type as a type marker (while labeling the latter with an
ominous deprecation warning). Reduce our depedendency on boost
by switching to std::type_identity.
Fixes#18903
Adds a "transitional" internode encryption mode, under which all
_outgoing_ RPC connections will use TLS, but we will still accept
any incoming non-tls connection.
This allows an operator to perform a move to TLS RPC without cluster
downtime:
1. For each server, add certificate etc options to
server_encryption_options
+ internode_encryption=none
+ set ssl_storage_port
+ restart (rolling)
2. For each server, set internode_encryption=transitional + RR
3. For each server, set internode_encryption=all + RR
Refs #18903
If ssl_storage_port is non-zero _and_ we have specified actual certificates
are set/exists, create TLS connector for RPC regardless of whether internode
encryption is enables. I.e. potentially unused. For transitioning cluster to
TLS.
Adding a new tenant needs to be done under cluster feature protection.
However it wasn't the case for adding `$maintenance` statement tenant
and to fix it we need to support an upgrade from node which doesn't
know about maintenance tenant at all and from one which uses it without
any cluster feature protection.
This commit adds `enabled` flag to statement tenants.
This way, when the tenant is disabled, it cannot be used to create
a connection, but it can be used to accept an incoming connection.
assert() is traditionally disabled in release builds, but not in
scylladb. This hasn't caused problems so far, but the latest abseil
release includes a commit [1] that causes a 1000 insn/op regression when
NDEBUG is not defined.
Clearly, we must move towards a build system where NDEBUG is defined in
release builds. But we can't just define it blindly without vetting
all the assert() calls, as some were written with the expectation that
they are enabled in release mode.
To solve the conundrum, change all assert() calls to a new SCYLLA_ASSERT()
macro in utils/assert.hh. This macro is always defined and is not conditional
on NDEBUG, so we can later (after vetting Seastar) enable NDEBUG in release
mode.
[1] 66ef711d68Closesscylladb/scylladb#20006
forward_service is nondescriptive and misnamed, as it does more than
forward requests. It's a classic map/reduce algorithm (and in fact one
of its parameters is "reducer"), so name it accordingly.
The name "forward" leaked into the wire protocol for the messaging
service RPC isolation cookie, so it's kept there. It's also maintained
in the name of the logger (for "nodetool setlogginglevel") for
compatibility with tests.
Closesscylladb/scylladb#19444
in theory, std::result_of_t should have been removed in C++20. and
std::invoke_result_t is available since C++17. thanks to libstdc++,
the tree is compiling. but we should not rely on this.
so, in this change, we replace all `std::result_of_t` with
`std::invoke_result_t`. actually, clang + libstdc++ is already warning
us like:
```
In file included from /home/runner/work/scylladb/scylladb/multishard_mutation_query.cc:9:
In file included from /home/runner/work/scylladb/scylladb/schema/schema_registry.hh:11:
In file included from /usr/bin/../lib/gcc/x86_64-linux-gnu/12/../../../../include/c++/12/unordered_map:38:
Warning: /usr/bin/../lib/gcc/x86_64-linux-gnu/12/../../../../include/c++/12/type_traits:2624:5: warning: 'result_of<void (noop_compacted_fragments_consumer::*(noop_compacted_fragments_consumer &))()>' is deprecated: use 'std::invoke_result' instead [-Wdeprecated-declarations]
2624 | using result_of_t = typename result_of<_Tp>::type;
| ^
/home/runner/work/scylladb/scylladb/mutation/mutation_compactor.hh:518:43: note: in instantiation of template type alias 'result_of_t' requested here
518 | if constexpr (std::is_same_v<std::result_of_t<decltype(&GCConsumer::consume_end_of_stream)(GCConsumer&)>, void>) {
|
```
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18835
because of https://bugzilla.redhat.com/show_bug.cgi?id=2278689,
the rebuilt abseil package provided by fedora has different settings
than the ones if the tree is built with the sanitizer enabled. this
inconsistency leads to a crash.
to address this problem, we have to reinstate the abseil submodule, so
we can built it with the same compiler options with which we build the
tree.
in this change
* Revert "build: drop abseil submodule, replace with distribution abseil"
* update CMake building system with abseil header include settings
* bump up the abseil submodule to the latest LTS branch of abseil:
lts_2024_01_16
* update scylla-gdb.py to adapt to the new structure of
flat_hash_map
This reverts commit 8635d24424.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18511
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we include `fmt/ranges.h` and/or `fmt/std.h`
for formatting the container types, like vector, map
optional and variant using {fmt} instead of the homebrew
formatter based on operator<<.
with this change, the changes adding fmt::formatter and
the changes using ostream formatter explicitly, we are
allowed to drop `FMT_DEPRECATED_OSTREAM` macro.
Refs scylladb#13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
range.hh was deprecated in bd794629f9 (2020) since its names
conflict with the C++ library concept of an iterator range. The name
::range also mapped to the dangerous wrapping_interval rather than
nonwrapping_interval.
Complete the deprecation by removing range.hh and replacing all the
aliases by the names they point to from the interval library. Note
this now exposes uses of wrapping intervals as they are now explicit.
The unit tests are renamed and range.hh is deleted.
Closesscylladb/scylladb#17428
In a mixed cluster (5.4.1-20231231.3d22f42cf9c3 and
5.5.0~dev-20240119.b1ba904c4977), in the rolling upgrade test, we saw
repair never finishing.
The following was observed:
rpc - client 127.0.0.2:65273 msg_id 5524: caught exception while
processing a message: std::out_of_range (deserialization buffer
underflow)
It turns out the repair rpc message was not compatible between the two
versions. Even with a rpc stream verb, the new rpc parameters must come
after the rpc::source<> parameter. The rpc::source<> parameter is not
special in the sense that it must be the last parameter.
For example, it should be:
void register_repair_get_row_diff_with_rpc_stream(
std::function<future<rpc::sink<repair_row_on_wire_with_cmd>> (
const rpc::client_info& cinfo, uint32_t repair_meta_id,
rpc::source<repair_hash_with_cmd> source, rpc::optional<shard_id> dst_cpu_id_opt)>&& func);
not:
void register_repair_get_row_diff_with_rpc_stream(
std::function<future<rpc::sink<repair_row_on_wire_with_cmd>> (
const rpc::client_info& cinfo, uint32_t repair_meta_id,
rpc::optional<shard_id> dst_cpu_id_opt, rpc::source<repair_hash_with_cmd> source)>&& func);
Fixes#16941Closesscylladb/scylladb#17156
In particular, `inet_address(const sstring& addr)` is
dangerous, since a function like
`topology::get_datacenter(inet_address ep)`
might accidentally convert a `sstring` argument
into an `inet_address` (which would most likely
throw an obscure std::invalid_argument if the datacenter
name does not look like an inet_address).
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#17260
The new rpc::optional parameter must come after any existing parameters,
including the rpc::source parameters, otherwise it will break
compatibility.
The regression was introduced in:
```
commit fd3c089ccc
Author: Tomasz Grabiec <tgrabiec@scylladb.com>
Date: Thu Oct 26 00:35:19 2023 +0200
service: range_streamer: Propagate topology_guard to receivers
```
We need to backport this patch ASAP before we release anything that
contains commit fd3c089ccc.
Refs: #16941Fixes: #17175Closesscylladb/scylladb#17176
get0() dates back from the days where Seastar futures carried tuples, and get0() was a way to get the first (and usually only) element. Now it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Closesscylladb/scylladb#17130
* github.com:scylladb/scylladb:
treewide: replace seastar::future::get0() with seastar::future::get()
sstable: capture return value of get0() using auto
utils: result_loop: define result_type with decayed type
[avi: add another one that snuck in while this was cooking]
