Split compaction_strategy_impl constructor into methods that will
be reused for validation.
Add additional checks providing that options' values are legal.
Add compaction_strategy_impl::validate_min_max_threshold method
that will be used to validate min and max threshold values
for different compaction methods.
Split size_tiered_compaction_strategy_options constructor into
methods that will be reused for validation.
Add additional checks providing that options' values are legal.
To be consistent with other compaction_strategy_options,
time_window_compaction_strategy_options uses compaction_strategy_impl::get_value
and cql3::statements::property_definitions::to_long helpers for
parsing.
Add temporarily empty validate method to compaction_strategy_options.
The method will validate the options and help determining whether
only the allowed options were set.
Make sure the compaction_state:s are idle before
they are destroyed. Although all tasks are stopped
in stop_ongoing_compactions, make sure there is
fiber holding the compaction_state gate.
compaction_manager::remove now needs to close the
compaction_state gate and to stop_ongoing_compactions
only if the gate is not closed yet.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Check if the compaction_state gate is closed
along with _state != state::enabled and return early
in this case.
At this point entering the gate is guaranteed to succeed.
So enter the gate before calling `perform_compaction`
keeping the std::optional<gate_holder> throughout
the compaction task.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Scylla sstable promises to *never* mutate its input sstables. This
promise was broken by `scylla sstable scrub --scrub-mode=validate`,
because validate moves invalid input sstables into qurantine. This is
unexpected and caused occasional failures in the scrub tests in
test_tools.py. Fix by propagating a flag down to
`scrub_sstables_validate_mode()` in `compaction.cc`, specifying whether
validate should qurantine invalid sstables, then set this flag to false
in `scylla-sstable.cc`. The existing test for validate-mode scrub is
ammended to check that the sstable is not mutated. The test now fails
before the fix and passes afterwards.
Fixes: #14309Closes#15139
Loop in shard_reshaping_compaction_task_impl::run relies on whether
sstables::compaction_stopped_exception is thrown from run_custom_job.
The exception is swallowed for each type of compaction
in compaction_manager::perform_task.
Rethrow an exception in perfrom task for reshape compaction.
Fixes: #15058.
Closes#15067
Compaction group is the data plane for tablets, so this integration
allows each tablet to have its own storage (memtable + sstables).
A crucial step for dynamic tablets, where each tablet can be worked
on independently.
There are still some inefficiencies to be worked on, but as it is,
it already unlocks further development.
```
INFO 2023-07-27 22:43:38,331 [shard 0] init - loading tablet metadata
INFO 2023-07-27 22:43:38,333 [shard 0] init - loading non-system sstables
INFO 2023-07-27 22:43:38,354 [shard 0] table - Tablet with id 0 present for ks.cf
INFO 2023-07-27 22:43:38,354 [shard 0] table - Tablet with id 2 present for ks.cf
INFO 2023-07-27 22:43:38,354 [shard 0] table - Tablet with id 4 present for ks.cf
INFO 2023-07-27 22:43:38,354 [shard 0] table - Tablet with id 6 present for ks.cf
INFO 2023-07-27 22:43:38,428 [shard 1] table - Tablet with id 1 present for ks.cf
INFO 2023-07-27 22:43:38,428 [shard 1] table - Tablet with id 3 present for ks.cf
INFO 2023-07-27 22:43:38,428 [shard 1] table - Tablet with id 5 present for ks.cf
INFO 2023-07-27 22:43:38,428 [shard 1] table - Tablet with id 7 present for ks.cf
```
Closes#14863
* github.com:scylladb/scylladb:
Kill scylla option to configure number of compaction groups
replica: Wire tablet into compaction group
token_metadata: Add this_host_id to topology config
replica: Switch to chunked_vector for storing compaction groups
replica: Generate group_id for compaction_group on demand
Before compaction task executors started inheriting from
compaction_task_impl, they were destructed immediately after
compaction finished. Destructors of executors and their
fields performed actions that affected global structures and
statistics and had impact on compaction process.
Currently, task executors are kept in memory much longer, as their
are tracked by task manager. Thus, destructors are not called just
after the compaction, which results in compaction stats not being
updated, which causes e.g. infinite cleanup loop.
Add release_resources() method which is called at the end
of compaction process and does what destructors used to.
Fixes: #14966.
Fixes: #15030.
Closes#15005
An sstable can be in one of several states -- normal, quarantined, staging, uploading. Right now this "state" is hard-wired into sstable's path, e.g. quarantined sstable would sit in e.g. /var/lib/data/ks-cf-012345/quarantine/ directory. Respectively, there's a bunch of directory names constexprs in sstables.hh defining each "state". Other than being confusing, this approach doesn't work well with S3 backend. Additionally, there's snapshot subdir that adds to the confusion, because snapshot is not quite a state.
This PR converts "state" from constexpr char* directories names into a enum class and patches the sstable creation, opening and state-changing API to use that enum instead of parsing the path.
refs: #13017
refs: #12707Closes#14152
* github.com:scylladb/scylladb:
sstable/storage: Make filesystem storage with initial state
sstable: Maintain state
sstable: Make .change_state() accept state, not directory string
sstable: Construct it with state
sstables_manager: Remove state-less make_sstable()
table: Make sstables with required state
test: Make sstables with upload state in some cases
tools: Make sstables with normal state
table: Open-code sstables making streaming helpers
tests: Make sstables with normal state by default
sstable_directory: Make sstable with required state
sstable_directory: Construct with state
distributed_loader: Make sstable with desired state when populating
distributed_loader: Make sstable with upload state when uploading
sstable: Introduce state enum
sstable_directory: Merge verify and g.c. calls
distributed_loader: Merge verify and gc invocations
sstable/filesystem: Put underscores to dir members
sstable/s3: Mark make_s3_object_name() const
sstable: Remove filename(dir, ...) method
There are a few good reasons for this change.
1) compaction_group doesn't have to be aware of # of groups
2) thinking forward to dynamic tablets, # of groups cannot be
statically embedded in group id, otherwise it gets stale.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
perform_offstrategy is called from try_perform_cleanup
when there are sstables in the maintenance set that require
cleanup.
The input sstables are inserted into the compaction_state
`sstables_requiring_cleanup` and `try_perform_cleanup`
expects offstrategy compaction to clean them up along
with reshape compaction.
Otherwise, the maintenance sstables that require cleanup
are not cleaned up by cleanup compaction, since
the reshape output sstable(s) are not analyzed again
after reshape compaction, where that would insert
the output sstable(s) into `sstables_requiring_cleanup`
and trigger their cleanup in the subsequent cleanup compaction.
The latter method is viable too, but it is less effficient
since we can do reshape+cleanup in one pass, vs.
reshape first and cleanup later.
Fixes scylladb/scylladb#15041
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closes#15043
discard_result ignores only successful futures. Thus, if
perform_compaction<regular_compaction_task_executor> call fails,
a failure is considered abandoned, causing tests to fail.
Explicitly ignore failed future.
Fixes: #14971.
Closes#15000
Pretty cosmetic change, but it will allow S3 to finally support moving
sstables between states (after this patch it still doesn't)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
If make_task call in compaction_manager::perform_compaction yields,
compaction_task_executor::_compaction_state may be gone and gate
won't be held.
Hold gate immediately after compaction_task_executor is created.
Add comment not to call prepare_task without preparation.
Refs: #14971.
Fixes: #14977.
Closes#14999
Currently `sstable_requiring_cleanup` is updated using `compacting_sstable_registration`, but that mechanism is not used by offstrategy compaction, leading to #14304.
This series introduces `compaction_manager::on_compaction_completion` that intercepts the call
to the table::on_compaction_completion. This allows us to update `sstable_requiring_cleanup` right before the compacted sstables are deleted, making sure they are no leaked to `sstable_requiring_cleanup`, which would hold a reference to them until cleanup attempts to clean them up.
`cleanup_incremental_compaction_test` was adjusted to observe the sstables `on_delete` (by adding a new observer event) to detect the case where cleanup attempts to delete the leaked sstables and fails since they were already deleted from the file system by offstrategy compaction. The test fails with the fix and passes with it.
Fixes#14304Closes#14858
* github.com:scylladb/scylladb:
compaction_manager: on_compaction_completion: erase sstables from sstables_requiring_cleanup
compaction/leveled_compaction_strategy: ideal_level_for_input: special case max_sstable_size==0
sstable: add on_delete observer
compaction_manager: add on_compaction_completion
sstable_compaction_test: cleanup_incremental_compaction_test: verify sstables_requiring_cleanup is empty
when it comes to `regular_compaction_task_executor`, we repeat the
compaction until the compaction can not proceed, so after an iteration
of compaction completes successfully, the task can still continue with
yet another round of the compaction as it sees appropriate. so let's
update the comment to reflect this fact.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14891
quite a few member variables serves as the configuration for
a given compaction, they are immutable in the life cycle of it,
so for better readability, let's mark them `const`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14981
Erase retired sstable from compaction_state::sstables_requiring_cleanup
also on_compaction_completion (in addition to
compacting_sstable_registration::release_compacting
for offstrategy compaction with piggybacked cleanup
or any other compaction type that doesn't use
compacting_sstable_registration.
Add cleanup_during_offstrategy_incremental_compaction_test
that is modeled after cleanup_incremental_compaction_test to check
that cleanup doesn't attempt to cleanup already-deleted
sstables that were left over by offstrategy compaction
in sstables_requiring_cleanup.
Fixes#14304
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Prevent div-by-zero byt returning const level 1
if max_sstable_size is zero, as configured by
cleanup_incremental_compaction_test, before it's
extended to cover also offstrategy compaction.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Pass the call to the table on_compaction_completion
so we can manage the sstables requiring cleanup state
along the way.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
All compaction task executors, except for regular compaction one,
become task manager compaction tasks.
Creating and starting of major_compaction_task_executor is modified
to be consistent with other compaction task executors.
Closes#14505
* github.com:scylladb/scylladb:
test: extend test_compaction_task.py to cover compaction group tasks
compaction: turn custom_task_executor into compaction_task_impl
compaction: turn sstables_task_executor into sstables_compaction_task_impl
compaction: change sstables compaction tasks type
compaction: move table_upgrade_sstables_compaction_task_impl
compaction: pass task_info through sstables compaction
compaction: turn offstrategy_compaction_task_executor into offstrategy_compaction_task_impl
compaction: turn cleanup_compaction_task_executor into cleanup_compaction_task_impl
comapction: use optional task info in major compaction
compaction: use perform_compaction in compaction_manager::perform_major_compaction
get_compacted_fragments_writer() returns a instance of
`compacted_fragments_writer`, there is no need to cast it again.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14919
add fmt formatter for `compaction_task_executor::state` and
`compaction_task_executor` and its derived classes.
this is a part of a series to migrating from `operator<<(ostream&, ..)`
based formatting to fmtlib based formatting. the goal here is to enable
fmtlib to print `compaction_task_executor`, its derived classes and
`compaction_task_executor::state` without the help of `operator<<`.
since all of the callers of 'operator<<' of these types now use
formatters, the operator<< are removed in this change. the helpers
like `to_string()` and `describe()` are removed as well, as it'd
be more consistent if we always use fmtlib for formatting instead
of inventing APIs with different names.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14906
cleanup_compaction_task_executor inherits both from compaction_task_executor
and cleanup_compaction_task_impl.
Add a new version of compaction_manager::perform_task_on_all_files
which accepts only the tasks that are derived from compaction_task_impl.
After all task executors' conversions are done, the new version replaces
the original one.
To make it consistent with the upcoming methods, methods triggering
major compaction get std::optional<tasks::task_info> as an argument.
Thanks to that we can distinguish between a task that has no parent
and the task which won't be registered in task manager.
simpler than the "begin, end" iterator pair. and also tighten the
type constraints, now require the value type to be
sstables::shared_sstable. this matches what we are expecting in
the implementation.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14678
Task manager tasks covering reshard compaction.
Reattempt on https://github.com/scylladb/scylladb/pull/14044. Bugfix for https://github.com/scylladb/scylladb/issues/14618 is squashed with 95191f4.
Regression test added.
Closes#14739
* github.com:scylladb/scylladb:
test: add test for resharding with non-empty owned_ranges_ptr
test: extend test_compaction_task.py to test resharding compaction
compaction: add shard_reshard_sstables_compaction_task_impl
compaction: invoke resharding on sharded database
compaction: move run_resharding_jobs into reshard_sstables_compaction_task_impl::run()
compaction: add reshard_sstables_compaction_task_impl
compaction: create resharding_compaction_task_impl
