Sometimes a single modification to a base partition requires updates to
a large number of view rows. A common example is deletion of a base
partition containing many rows. A large BATCH is also possible.
To avoid large allocations, we split the large amount of work into
batch of 100 (max_rows_for_view_updates) rows each. The existing code
assumed an empty result from one of these batches meant that we are
done. But this assumption was incorrect: There are several cases when
a base-table update may not need a view update to be generated (see
can_skip_view_updates()) so if all 100 rows in a batch were skipped,
the view update stopped prematurely. This patch includes two tests
showing when this bug can happen - one test using a partition deletion
with a USING TIMESTAMP causing the deletion to not affect the first
100 rows, and a second test using a specially-crafed large BATCH.
These use cases are fairly esoteric, but in fact hit a user in the
wild, which led to the discovery of this bug.
The fix is fairly simple: To detect when build_some() is done it is no
longer enough to check if it returned zero view-update rows; Rather,
it explicitly returns whether or not it is done as an std::optional.
The patch includes several tests for this bug, which pass on Cassandra,
failed on Scylla before this patch, and pass with this patch.
Fixes#12297.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#12305
(cherry picked from commit 92d03be37b)
The semaphore currently has two admission paths: the
obtain_permit()/with_permit() methods which admits permits on user
request (the front door) and the maybe_admit_waiters() which admits
permits based on internal events like memory resource being returned
(the back door). The two paths used their own admission conditions
and naturally this means that they diverged in time. Notably,
maybe_admit_waiters() did not look at inactive readers assuming that if
there are waiters there cannot be inactive readers. This is not true
however since we merged the execution-stage into the semaphore. Waiters
can queue up even when there are inactive reads and thus
maybe_admit_waiters() has to consider evicting some of them to see if
this would allow for admitting new reads.
To avoid such divergence in the future, the admission logic was moved
into a new method can_admit_read() which is now shared between the two
method families. This method now checks for the possibility of evicting
inactive readers as well.
The admission logic was tuned slightly to only consider evicting
inactive readers if there is a real possibility that this will result
in admissions: notably, before this patch, resource availability was
checked before stalls were (used permits == blocked permits), so we
could evict readers even if this couldn't help.
Because now eviction can be started from maybe_admit_waiters(), which is
also downstream from eviction, we added a flag to avoid recursive
evict -> maybe admit -> evict ... loops.
Fixes: #11770Closes#11784
(cherry picked from commit 7fbad8de87)
Regular INSERT statements with null values for primary key
components are rejected by Scylla since #9286 and #9314.
Batch statements missed a similar check, this patch
fixes it.
Fixes: #12060
(cherry picked from commit 7730c4718e)
When the mutation compactor has all the rows it needs for a page, it
saves the decision to stop in a member flag: _stop.
For single partition queries, the mutation compactor is kept alive
across pages and so it has a method, start_new_page() to reset its state
for the next page. This method didn't clear the _stop flag. This meant
that the value set at the end of the previous could cause the new page
and subsequently the entire query to be stopped prematurely.
This can happen if the new page starts with a row that is covered by a
higher level tombstone and is completely empty after compaction.
Reset the _stop flag in start_new_page() to prevent this.
This commit also adds a unit test which reproduces the bug.
Fixes: #12361Closes#12384
(cherry picked from commit b0d95948e1)
This series backports several patches which add or enable tests for Alternator TTL. The series does not touch the code - just tests.
The goal of backporting more tests is to get the code - which is already in branch 5.1 - tested. It wasn't a good idea to backport code without backporting the tests for it.
Closes#12200Fixes#11374
* github.com:scylladb/scylladb:
test/alternator: increase timeout on TTL tests
test/alternator: fix timeout in flaky test test_ttl_stats
test/alternator: test Alternator TTL metrics
test/alternator: skip fewer Alternator TTL tests
Changing configuration involves two entries in the log: a 'joint
configuration entry' and a 'non-joint configuration entry'. We use
`wait_for_entry` to wait on the joint one. To wait on the non-joint one,
we use a separate promise field in `server`. This promise wasn't
connected to the `abort_source` passed into `set_configuration`.
The call could get stuck if the server got removed from the
configuration and lost leadership after committing the joint entry but
before committing the non-joint one, waiting on the promise. Aborting
wouldn't help. Fix this by subscribing to the `abort_source` in
resolving the promise exceptionally.
Furthermore, make sure that two `set_configuration` calls don't step on
each other's toes by one setting the other's promise. To do that, reset
the promise field at the end of `set_configuration` and check that it's
not engaged at the beginning.
Fixes#11288.
Closes#11325
* github.com:scylladb/scylladb:
test: raft: randomized_nemesis_test: additional logging
raft: server: handle aborts when waiting for config entry to commit
(cherry picked from commit 83850e247a)
When `io_fiber` fetched a batch with a configuration that does not
contain this node, it would send the entries committed in this batch to
`applier_fiber` and proceed by any remaining entry dropping waiters (if
the node was no longer a leader).
If there were waiters for entries committed in this batch, it could
either happen that `applier_fiber` received and processed those entries
first, notifying the waiters that the entries were committed and/or
applied, or it could happen that `io_fiber` reaches the dropping waiters
code first, causing the waiters to be resolved with
`commit_status_unknown`.
The second scenario is undesirable. For example, when a follower tries
to remove the current leader from the configuration using
`modify_config`, if the second scenario happens, the follower will get
`commit_status_unknown` - this can happen even though there are no node
or network failures. In particular, this caused
`randomized_nemesis_test.remove_leader_with_forwarding_finishes` to fail
from time to time.
Fix it by serializing the notifying and dropping of waiters in a single
fiber - `applier_fiber`. We decided to move all management of waiters
into `applier_fiber`, because most of that management was already there
(there was already one `drop_waiters` call, and two `notify_waiters`
calls). Now, when `io_fiber` observes that we've been removed from the
config and no longer a leader, instead of dropping waiters, it sends a
message to `applier_fiber`. `applier_fiber` will drop waiters when
receiving that message.
Improve an existing test to reproduce this scenario more frequently.
Fixes#11235.
Closes#11308
* github.com:scylladb/scylladb:
test: raft: randomized_nemesis_test: more chaos in `remove_leader_with_forwarding_finishes`
raft: server: drop waiters in `applier_fiber` instead of `io_fiber`
raft: server: use `visit` instead of `holds_alternative`+`get`
(cherry picked from commit 9c4e32d2e2)
Contains fixes requested in the issue (and some tiny extras), together with analysis why they don't affect the users (see commit messages).
Fixes [ #11800](https://github.com/scylladb/scylladb/issues/11800)
Closes#11926
* github.com:scylladb/scylladb:
alternator: add maybe_quote to secondary indexes 'where' condition
test/alternator: correct xfail reason for test_gsi_backfill_empty_string
test/alternator: correct indentation in test_lsi_describe
alternator: fix wrong 'where' condition for GSI range key
(cherry picked from commit ce7c1a6c52)
The SELECT JSON statement, just like SELECT, allows the user to rename
selected columns using an "AS" specification. E.g., "SELECT JSON v AS foo".
This specification was not honored: We simply forgot to look at the
alias in SELECT JSON's implementation (we did it correctly in regular
SELECT). So this patch fixes this bug.
We had two tests in cassandra_tests/validation/entities/json_test.py
that reproduced this bug. The checks in those tests now pass, but these
two tests still continue to fail after this patch because of two other
unrelated bugs that were discovered by the same tests. So in this patch
I also add a new test just for this specific issue - to serve as a
regression test.
Fixes#8078
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#12123
(cherry picked from commit c5121cf273)
When we write to a materialized view, we need to know some information
defined in the base table such as the columns in its schema. We have
a "view_info" object that tracks each view and its base.
This view_info object has a couple of mutable attributes which are
used to lazily-calculate and cache the SELECT statement needed to
read from the base table. If the base-table schema ever changes -
and the code calls set_base_info() at that point - we need to forget
this cached statement. If we don't (as before this patch), the SELECT
will use the wrong schema and writes will no longer work.
This patch also includes a reproducing test that failed before this
patch, and passes afterwords. The test creates a base table with a
view that has a non-trivial SELECT (it has a filter on one of the
base-regular columns), makes a benign modification to the base table
(just a silly addition of a comment), and then tries to write to the
view - and before this patch it fails.
Fixes#10026Fixes#11542
(cherry picked from commit 2f2f01b045)
Some of the tests in test/alternator/test_ttl.py need an expiration scan
pass to complete and expire items. In development builds on developer
machines, this usually takes less than a second (our scanning period is
set to half a second). However, in debug builds on Jenkins each scan
often takes up to 100 (!) seconds (this is the record we've seen so far).
This is why we set the tests' timeout to 120.
But recently we saw another test run failing. I think the problem is
that in some case, we need not one, but *two* scanning passes to
complete before the timeout: It is possible that the test writes an
item right after the current scan passed it, so it doesn't get expired,
and then we a second scan at a random position, possibly making that
item we mention one of the last items to be considered - so in total
we need to wait for two scanning periods, not one, for the item to
expire.
So this patch increases the timeout from 120 seconds to 240 seconds -
more than twice the highest scanning time we ever saw (100 seconds).
Note that this timeout is just a timeout, it's not the typical test
run time: The test can finish much more quickly, as little as one
second, if items expire quickly on a fast build and machine.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#12106
(cherry picked from commit 6bc3075bbd)
The test `test_metrics.py::test_ttl_stats` tests the metrics associated
with Alternator TTL expiration events. It normally finishes in less than a
second (the TTL scanning is configured to run every 0.5 seconds), so we
arbitrarily set a 60 second timeout for this test to allow for extremely
slow test machines. But in some extreme cases even this was not enough -
in one case we measured the TTL scan to take 63 seconds.
So in this patch we increase the timeout in this test from 60 seconds
to 120 seconds. We already did the same change in other Alternator TTL
tests in the past - in commit 746c4bd.
Fixes#11695
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11696
(cherry picked from commit 3a30fbd56c)
This patch adds a test for the metrics generated by the background
expiration thread run for Alternator's TTL feature.
We test three of the four metrics: scylla_expiration_scan_passes,
scylla_expiration_scan_table and scylla_expiration_items_deleted.
The fourth metric, scylla_expiration_secondary_ranges_scanned, counts the
number of times that this node took over another node's expiration duty.
so requires a multi-node cluster to test, and we can't test it in the
single-node cluster test framework.
To see TTL expiration in action this test may need to wait up to the
setting of alternator_ttl_period_in_seconds. For a setting of 1
second (the default set by test/alternator/run), this means this
test can take up to 1 second to run. If alternator_ttl_period_in_seconds
is set higher, the test is skipped unless --runveryslow is requested.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit 297109f6ee)
Most of the Alternator TTL tests are extremely slow on DynamoDB because
item expiration may be delayed up to 24 hours (!), and in practice for
10 to 30 minutes. Because of this, we marked most of these tests
with the "veryslow" mark, causing them to be skipped by default - unless
pytest is given the "--runveryslow" option.
The result was that the TTL tests were not run in the normal test runs,
which can allow regressions to be introduced (luckily, this hasn't happened).
However, this "veryslow" mark was excessive. Many of the tests are very
slow only on DynamoDB, but aren't very slow on Scylla. In particular,
many of the tests involve waiting for an item to expire, something that
happens after the configurable alternator_ttl_period_in_seconds, which
is just one second in our tests.
So in this patch, we remove the "veryslow" mark from 6 tests of Alternator TTL
tests, and instead use two new fixtures - waits_for_expiration and
veryslow_on_aws - to only skip the test when running on DynamoDB or
when alternator_ttl_period_in_seconds is high - but in our usual test
environment they will not get skipped.
Because 5 of these 6 tests wait for an item to expire, they take one
second each and this patch adds 5 seconds to the Alternator test
runtime. This is unfortunate (it's more than 25% of the total Alternator
test runtime!) but not a disaster, and we plan to reduce this 5 second
time futher in the following patch, but decreasing the TTL scanning
period even further.
This patch also increases the timeout of several of these tests, to 120
seconds from the previous 10 seconds. As mentioned above, normally,
these tests should always finish in alternator_ttl_period_in_seconds
(1 second) with a single scan taking less than 0.2 seconds, but in
extreme cases of debug builds on overloaded test machines, we saw even
60 seconds being passed, so let's increase the maximum. I also needed
to make the sleep time between retries smaller, not a function of the
new (unrealistic) timeout.
4 more tests remain "veryslow" (and won't run by default) because they
are take 5-10 seconds each (e.g., a test which waits to see that an item
does *not* get expired, and a test involving writing a lot of data).
We should reconsider this in the future - to perhaps run these tests in
our normal test runs - but even for now, the 6 extra tests that we
start running are a much better protection against regressions than what
we had until now.
Fixes#11374
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
x
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit 746c4bd9eb)
PR #9314 fixed a similar issue with regular insert statements
but missed the LWT code path.
It's expected behaviour of
modification_statement::create_clustering_ranges to return an
empty range in this case, since possible_lhs_values it
uses explicitly returns empty_value_set if it evaluates rhs
to null, and it has a comment about it (All NULL
comparisons fail; no column values match.) On the other hand,
all components of the primary key are required to be set,
this is checked at the prepare phase, in
modification_statement::process_where_clause. So the only
problem was modification_statement::execute_with_condition
was not expecting an empty clustering_range in case of
a null clustering key.
Fixes: #11954
(cherry picked from commit 0d443dfd16)
When filtering with multi column restriction present all other restrictions were ignored.
So a query like:
`SELECT * FROM WHERE pk = 0 AND (ck1, ck2) < (0, 0) AND regular_col = 0 ALLOW FILTERING;`
would ignore the restriction `regular_col = 0`.
This was caused by a bug in the filtering code:
2779a171fc/cql3/selection/selection.cc (L433-L449)
When multi column restrictions were detected, the code checked if they are satisfied and returned immediately.
This is fixed by returning only when these restrictions are not satisfied. When they are satisfied the other restrictions are checked as well to ensure all of them are satisfied.
This code was introduced back in 2019, when fixing #3574.
Perhaps back then it was impossible to mix multi column and regular columns and this approach was correct.
Fixes: #6200Fixes: #12014Closes#12031
* github.com:scylladb/scylladb:
cql-pytest: add a reproducer for #12014, verify that filtering multi column and regular restrictions works
boost/restrictions-test: uncomment part of the test that passes now
cql-pytest: enable test for filtering combined multi column and regular column restrictions
cql3: don't ignore other restrictions when a multi column restriction is present during filtering
(cherry picked from commit 2d2034ea28)
The view builder builds the views from a given base table in
view_builder::batch_size batches of rows. After processing this many
rows, it suspends so the view builder can switch to building views for
other base tables in the name of fairness. When resuming the build step
for a given base table, it reuses the reader used previously (also
serving the role of a snapshot, pinning sstables read from). The
compactor however is created anew. As the reader can be in the middle of
a partition, the view builder injects a partition start into the
compactor to prime it for continuing the partition. This however only
included the partition-key, crucially missing any active tombstones:
partition tombstone or -- since the v2 transition -- active range
tombstone. This can result in base rows covered by either of this to be
resurrected and the view builder to generate view updates for them.
This patch solves this by using the detach-state mechanism of the
compactor which was explicitly developed for situations like this (in
the range scan code) -- resuming a read with the readers kept but the
compactor recreated.
Also included are two test cases reproducing the problem, one with a
range tombstone, the other with a partition tombstone.
Fixes: #11668Closes#11671
(cherry picked from commit 5621cdd7f9)
The return from DescribeTable which describes GSIs and LSIs is missing
the Projection field. We do not yet support all the settings Projection
(see #5036), but the default which we support is ALL, and DescribeTable
should return that in its description.
Fixes#11470Closes#11693
(cherry picked from commit 636e14cc77)
As described in issue #11801, we saw in Alternator when a GSI has both partition and sort keys which were non-key attributes in the base, cases where updating the GSI-sort-key attribute to the same value it already had caused the entire GSI row to be deleted.
In this series fix this bug (it was a bug in our materialized views implementation) and add a reproducing test (plus a few more tests for similar situations which worked before the patch, and continue to work after it).
Fixes#11801Closes#11808
* github.com:scylladb/scylladb:
test/alternator: add test for issue 11801
MV: fix handling of view update which reassign the same key value
materialized views: inline used-once and confusing function, replace_entry()
(cherry picked from commit e981bd4f21)
Scylla's Bloom filter implementation has a minimal false-positive rate
that it can support (6.71e-5). When setting bloom_filter_fp_chance any
lower than that, the compute_bloom_spec() function, which writes the bloom
filter, throws an exception. However, this is too late - it only happens
while flushing the memtable to disk, and a failure at that point causes
Scylla to crash.
Instead, we should refuse the table creation with the unsupported
bloom_filter_fp_chance. This is also what Cassandra did six years ago -
see CASSANDRA-11920.
This patch also includes a regression test, which crashes Scylla before
this patch but passes after the patch (and also passes on Cassandra).
Fixes#11524.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11576
(cherry picked from commit 4c93a694b7)
DescribeTable is currently hard-coded to return PAY_PER_REQUEST billing
mode. Nevertheless, even in PAY_PER_REQUEST mode, the DescribeTable
operation must return a ProvisionedThroughput structure, listing both
ReadCapacityUnits and WriteCapacityUnits as 0. This requirement is not
stated in some DynamoDB documentation but is explictly mentioned in
https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_ProvisionedThroughput.html
Also in empirically, DynamoDB returns ProvisionedThroughput with zeros
even in PAY_PER_REQUEST mode. We even had an xfailing test to confirm this.
The ProvisionedThroughput structure being missing was a problem for
applications like DynamoDB connectors for Spark, if they implicitly
assume that ProvisionedThroughput is returned by DescribeTable, and
fail (as described in issue #11222) if it's outright missing.
So this patch adds the missing ProvisionedThroughput structure, and
the xfailing test starts to pass.
Note that this patch doesn't change the fact that attempting to set
a table to PROVISIONED billing mode is ignored: DescribeTable continues
to always return PAY_PER_REQUEST as the billing mode and zero as the
provisioned capacities.
Fixes#11222
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11298
(cherry picked from commit 941c719a23)
When cross-shard barrier is abort()-ed it spawns a background fiber
that will wake-up other shards (if they are sleeping) with exception.
This fiber is implicitly waited by the owning sharded service .stop,
because barrier usage is like this:
sharded<service> s;
co_await s.invoke_on_all([] {
...
barrier.abort();
});
...
co_await s.stop();
If abort happens, the invoke_on_all() will only resolve _after_ it
queues up the waking lambdas into smp queues, thus the subseqent stop
will queue its stopping lambdas after barrier's ones.
However, in debug mode the queue can be shuffled, so the owning service
can suddenly be freed from under the barrier's feet causing use after
free. Fortunately, this can be easily fixed by capturing the shared
pointer on the shared barrier instead of a regular pointer on the
shard-local barrier.
fixes: #11303
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#11553
The generator was first setting the marker then applied tombstones.
The marker was set like this:
row.marker() = random_row_marker();
Later, when shadowable tombstones were applied, they were compacted
with the marker as expected.
However, the key for the row was chosen randomly in each iteration and
there are multiple keys set, so there was a possibility of a key clash
with an earlier row. This could override the marker without applying
any tombstones, which is conditional on random choice.
This could generate rows with markers uncompacted with shadowable tombstones.
This broken row_cache_test::test_concurrent_reads_and_eviction on
comparison between expected and read mutations. The latter was
compacted because it went through an extra merge path, which compacts
the row.
Fix by making sure there are no key clashes.
Closes#11663
(cherry picked from commit 5268f0f837)
Range tombstones are kept in memory (cache/memtable) in
range_tombstone_list. It keeps them deoverlapped, so applying a range
tombstone which covers many range tombstones will erase existing range
tombstones from the list. This operation needs to be exception-safe,
so range_tombstone_list maintains an undo log. This undo log will
receive a record for each range tombstone which is removed. For
exception safety reasons, before pushing an undo log entry, we reserve
space in the log by calling std::vector::reserve(size() + 1). This is
O(N) where N is the number of undo log entries. Therefore, the whole
application is O(N^2).
This can cause reactor stalls and availability issues when replicas
apply such deletions.
This patch avoids the problem by reserving exponentially increasing
amount of space. Also, to avoid large allocations, switches the
container to chunked_vector.
Fixes#11211Closes#11215
(cherry picked from commit 7f80602b01)
Said method currently emits a partition-end. This method is only called
when the last fragment in the stream is a range tombstone change with a
position after all clustered rows. The problem is that
consume_partition_end() is also called unconditionally, resulting in two
partition-end fragments being emitted. The fix is simple: make this
method a no-op, there is nothing to do there.
Also add two tests: one targeted to this bug and another one testing the
crawling reader with random mutations generated for random schema.
Fixes: #11421Closes#11422
(cherry picked from commit be9d1c4df4)
from Tomasz Grabiec
This series fixes lack of mutation associativity which manifests as
sporadic failures in
row_cache_test.cc::test_concurrent_reads_and_eviction due to differences
in mutations applied and read.
No known production impact.
Refs https://github.com/scylladb/scylladb/issues/11307Closes#11312
* github.com:scylladb/scylladb:
test: mutation_test: Add explicit test for mutation commutativity
test: random_mutation_generator: Workaround for non-associativity of mutations with shadowable tombstones
db: mutation_partition: Drop unnecessary maybe_shadow()
db: mutation_partition: Maintain shadowable tombstone invariant when applying a hard tombstone
mutation_partition: row: make row marker shadowing symmetric
(cherry picked from commit 484004e766)
This makes catching issues related to concurrent access of same or
adjacent entries more likely. For example, catches #11239.
Closes#11260
(cherry picked from commit 8ee5b69f80)
Currently, when detaching the table from the database, we force-evict all queriers for said table. This series broadens the scope of this force-evict to include all inactive reads registered at the semaphore. This ensures that any regular inactive read "forgotten" for any reason in the semaphore, will not end up in said readers accessing a dangling table reference when destroyed later.
Fixes: https://github.com/scylladb/scylladb/issues/11264Closes#11273
* github.com:scylladb/scylladb:
querier: querier_cache: remove now unused evict_all_for_table()
database: detach_column_family(): use reader_concurrency_semaphore::evict_inactive_reads_for_table()
reader_concurrency_semaphore: add evict_inactive_reads_for_table()
(cherry picked from commit afa7960926)
Scenario:
cache = [
row(pos=2, continuous=false),
row(pos=after(2), dummy=true)
]
Scanning read starts, starts populating [-inf, before(2)] from sstables.
row(pos=2) is evicted.
cache = [
row(pos=after(2), dummy=true)
]
Scanning read finishes reading from sstables.
Refreshes cache cursor via
partition_snapshot_row_cursor::maybe_refresh(), which calls
partition_snapshot_row_cursor::advance_to() because iterators are
invalidated. This advances the cursor to
after(2). no_clustering_row_between(2, after(2)) returns true, so
advance_to() returns true, and maybe_refresh() returns true. This is
interpreted by the cache reader as "the cursor has not moved forward",
so it marks the range as complete, without emitting the row with
pos=2. Also, it marks row(pos=after(2)) as continuous, so later reads
will also miss the row.
The bug is in advance_to(), which is using
no_clustering_row_between(a, b) to determine its result, which by
definition excludes the starting key.
Discovered by row_cache_test.cc::test_concurrent_reads_and_eviction
with reduced key range in the random_mutation_generator (1024 -> 16).
Fixes#11239Closes#11240
* github.com:scylladb/scylladb:
test: mvcc: Fix illegal use of maybe_refresh()
tests: row_cache_test: Add test_eviction_of_upper_bound_of_population_range()
tests: row_cache_test: Introduce one_shot mode to throttle
row_cache: Fix missing row if upper bound of population range is evicted and has adjacent dummy
Implementing json2sstable functionality. It allows generating an sstable from a JSON description of its content. Uses identical schema to dump-data, so it is possible to regenerate an existing sstable, by feeding the output of dump-data to write.
Most of the scylla storage engine features are supported. The only non-supported features are counters and non-strictly atomic data types (including frozen collections, tuples and UDTs).
Example invocation:
```
scylla sstable write --system-schema system_schema.columns --input-file ./input.json --generation 0
```
Refs: https://github.com/scylladb/scylladb/issues/9681
Future plans:
* Complete support for remaining features (counters and non-atomic types).
* Make sstable format configurable on the command line.
Closes#11181
* github.com:scylladb/scylladb:
test/cql-pytest: test_tools.py: add test for sstable write
test/cql-pytest: test-tools.py actually test with multiple sstables
test/cql-pytest: test_tools.py: reduce the number of test-cases
tools/scylla-sstable: introduce the write operation
tools/scylla-sstable: add support for writer operations
tools/scylla-sstable: dump-data: write bound-weight as int
tools/scylla-sstable: dump-data: always write deletion time for cell tombstones
tools/scylla-sstable: dump-data: add timezone to deletion_time
types: publish timestamp_from_string()
We can now do a full circle: dump an sstable to json, generate an
sstable from it, then dump again and compare to the original json.
Expand the existing simple_no_clustering_table and
simple_clustering_table schema/data to improve coverage of things like
TTL, tombstones and static rows.
The test-cases in this suite have a parameter to run with one or
multiple input sstables. This was broken as each test table generated a
single sstable. Fix this so we actually get single/multiple input
sstable coverage.
Currently this test-case exercises all the available component dumpers
with many different schemas. This doesn't add any value for most of the
dumpers, save for the dump-data one. It does have a cost however in
run-time of these test-cases. Test the dumpers which are mostly
indifferent to the schema with just a single one, cutting the number of
generated test-cases from 70 to 30.
Start compaction_manager as a sharded service
and pass a reference to it to the database rather
than having the database construct its own compaction_manager.
This is part of the wider scope effort to decouple compaction from replica database and table.
Closes#11099
* github.com:scylladb/scylladb:
compaction_manager: perform_cleanup, perform_sstable_upgrade: use a lw_shared_ptr for owned token ranges
compaction: cleanup, upgrade: use a lw_shared_ptr for owned token ranges
main: start compaction_manager as a sharded service
compaction_manager: keep config as member
backlog_controller: keep scheduling_group by value
backlog_controller: scheduling_group: keep io_priority_class by value
backlog_controller: scheduling_group: define default member initializers
backlog_controller: get rid of _interval member
When stopping the read, the multishard reader will dismantle the
compaction state, pushing back (unpopping) the currently processed
partition's header to its originating reader. This ensures that if the
reader stops in the middle of a partition, on the next page the
partition-header is re-emitted as the compactor (and everything
downstream from it) expects.
It can happen however that there is nothing more for the current
partition in the reader and the next fragment is another partition.
Since we only push back the partition header (without a partition-end)
this can result in two partitions being emitted without being separated
by a partition end.
We could just add the missing partition-end when needed but it is
pointless, if the partition has no more data, just drop the header, we
won't need it on the next page.
The missing partition-end can generate an "IDL frame truncated" message
as it ends up causing the query result writer to create a corrupt
partition entry.
Fixes: https://github.com/scylladb/scylladb/issues/9482Closes#11175
* github.com:scylladb/scylladb:
test/cql-pytest: add regression test for "IDL frame truncated" error
mutation_compactor: detach_state(): make it no-op if partition was exhausted
querier: use full_position in shard_mutation_querier
Calling WebAssembly UDFs requires wasmtime instance. Creating such an instance is expensive,
but these instances can be reused for subsequent calls of the same UDF on various inputs.
This patch introduces a way of reusing wasmtime instances: a wasm instance cache.
The cache stores a wasmtime instance for each UDF and scheduling group. The instances are
evicted using LRU strategy and their size is based on the size of their wasm memories.
The instances stored in the cache are also dropped when the UDF is dropped itself. For that reason,
the first patch modifies the current implementation of UDF dropping, so that the instance dropping may be added
later. The patch also removes the need of compiling the UDF again when dropping it.
The second patch contains the implementation and use of the new cache. The cache is implemented
in `lang/wasm_instance_cache.hh` and the main ways of using it are the `run_script` methods from `wasm.hh`
The third patch adds tests to `test_wasm.py` that check the correctness and performance of the new
cache. The tests confirm the instance reuse, size limits, instance eviction after timeout and after dropping the UDF.
Closes#10306
* github.com:scylladb/scylladb:
wasm: test instances reuse
wasm: reuse UDF instances
schema_tables: simplify merge_functions and avoid extra compilation
Currently they are copied for the get_sstables function
so this change reduces copies.
Also, it will allow further decoupling of compaction_manager
from replica::database, by letting the caller of
perform_cleanup and perform_sstable_upgrade get the
owned token ranges from db and pass it to the perform_*
functions in the following patch.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
And pass a reference to it to the database rather
than having the database construct its own compaction_manager.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
and return status over the rest api' from Aleksandra Martyniuk
Currently, scrub returns to user the number indicating operation
result as follows:
- 1 when the operation was aborted;
- 3 in validate and segregate modes when validation errors were found
(and in segregate mode - fixed);
- 0 if operation ended successfully.
To achieve so, if an operation was aborted in abort mode, then
the exception is propagated to storage_service.cc. Also the number
of validation errors for current scrub is gathered and summed
from each shard there.
The number of validation errors is counted and registered in metrics.
Metrics provide common counters for all scrub operation within
a compaction manager, though. Thus, to check the exact number
of validation errors, the comparison of counter value before and after
scrub operation needs to be done.
Closes#11074
* github.com:scylladb/scylladb:
scrub compaction: return status indicating aborted operations over the rest api
test: move scylla_inject_error from alternator/ to cql-pytest/
scrub compaction: count validation errors and return status over the rest api
scrub compaction: count validation errors for specific scrub task
compaction: extract statistics in compaction_result
scrub compaction: register validation errors in metrics
scrub compaction: count validation errors
This reverts commit c3bad157e5, reversing
changes made to e66809d051. The checks it
adds are triggered by some dtests. While it's possible the check is
triggered due to an existing problem, better to investigate it out-of-tree.
Fixes#11169.
over the rest api
Performing compaction scrub user did not know whether an operation
was aborted.
If compaction scrub is aborted, return status the user gets over
rest api is set to 1.
Move scylla_inject_error from alternator/ to cql-pytest/ so it
can be reached from various tests dirs. alternator/util.py is
renamed to alternator/alternator_util.py to avoid name shadowing.
When stopping the read, the multishard reader will dismantle the
compaction state, pushing back (unpopping) the currently processed
partition's header to its originating reader. This ensures that if the
reader stops in the middle of a partition, on the next page the
partition-header is re-emitted as the compactor (and everything
downstream from it) expects.
It can happen however that there is nothing more for the current
partition in the reader and the next fragment is another partition.
Since we only push back the partition header (without a partition-end)
this can result in two partitions being emitted without being separated
by a partition end.
We could just add the missing partition-end when needed but it is
pointless, if the partition has no more data, just drop the header, we
won't need it on the next page.
The missing partition-end can generate an "IDL frame truncated" message
as it ends up causing the query result writer to create a corrupt
partition entry.
Fixes: https://github.com/scylladb/scylla/issues/9482Closes#11137
* github.com:scylladb/scylladb:
test/cql-pytest: add regression test for "IDL frame truncated" error
query: query_result_builder: add check for missing partition-end
mutation_compactor: detach_state(): make it no-op if partition was exhausted
querier: use full_position in shard_mutation_querier
Called from try_flush_memtable_to_sstable,
maybe_wait_for_sstable_count_reduction will wait for
compaction to catch up with memtable flush if there
the bucket to compact is inflated, having too many
sstables. In that case we don't want to add fuel
to the fire by creating yet another sstable.
Fixes#4116Closes#10954
* github.com:scylladb/scylla:
table: Add test where compaction doesn't keep up with flush rate.
compaction_manager: add maybe_wait_for_sstable_count_reduction
time_window_compaction_strategy: get_sstables_for_compaction: clean up code
time_window_compaction_strategy: make get_sstables_for_compaction idempotent
time_window_compaction_strategy: get_sstables_for_compaction: improve debug messages
leveled_manifest: pass compaction_counter as const&
Currently logalloc::region is relying on boost binomial_heap handle to properly move listeners registration when the region (when derived from dirty_memory_manager_logalloc::size_tracked_region) is moved, like boost::intrusive link hooks do -
hence 81e20ceaab/dirty_memory_manager.cc (L89-L90) does nothing.
Unfortunately, this doesn't work as expected.
This series adds a unit test that verifies the move semantics
and a fix to size_tracked_region and region_group code to make it pass.
Also "logalloc: region: get_impl might be called on disengaged _impl when moved"
fixes a couple corner cases where the shared _impl could be dereferenced when disengaged, and
the change also adds a unit test for that too.
Closes#11141
* github.com:scylladb/scylla:
logalloc: region: properly track listeners when moved
logalloc: region_impl: add moved method
logalloc: region: merge: optimize getting other impl
logalloc: region: merge: call region_impl::unlisten
logalloc: region: call unlisten rather than open coding it
logalloc: region move-ctor: initialize _impl
logalloc: region: get_impl might be called on disengaged _impl when moved
