We were ignored --smp option taken from io.conf since iotune didn't supported
it, but now it supported we can pass it.
(We need to pass it because we need to measure io performance on same condition
with scylla)
Fixes#1768
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1478082591-27205-1-git-send-email-syuu@scylladb.com>
EC2 paravirtual instances uses pv-grub, which refers /boot/grub/menu.lst (grub0.9x config file) instead of grub2 config file.
So add boot parameters on /boot/grub/menu.lst when the file exists, and the instance is on EC2.
Fixes#1598
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472056875-17512-1-git-send-email-syuu@scylladb.com>
wget is often used from scripts recording to logs; as it emits a log
line every second, the logs are huge and unreadable. Make it quieter.
Message-Id: <1477558534-32718-1-git-send-email-avi@scylladb.com>
The current chunk size of 256 gives a 50% probability of a 128k read or
write getting split into two accesses. This reduces efficiency and
increases latency.
Change the chunk size to 1MB, with a 12% probability of cross-member
access.
Message-Id: <1476269082-2473-1-git-send-email-avi@scylladb.com>
The expected behaviour in the scylla_setup script is that a question
will be followed by the answer.
For example, after asking if the scylla should be run as a service the
relevant actions will be taken before the following question.
This patch address two such mis-orders:
1. the scylla-housekeeping depends on the scylla-server, but the
setup should first setup the scylla-server service and only then ask
(and install if needed) the scylla-housekeeping.
2. The node_exporter should be placed after the io_setup is done.
Fixes#1739
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1476370098-25617-1-git-send-email-amnon@scylladb.com>
The script mistakenly split value at "," when cpuset list is separated
by comma. Instead of matching possible patterns of the argument, let's
pass all characters until reach to space delimiter or end of line.
Fixes#1716
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476171037-32373-1-git-send-email-syuu@scylladb.com>
"The version is taken from the installation rather than the API, a mode command
line indicated that this is part of the setup and uuid is used for the
interaction with the checkversion server."
* 'amnon/check_version_on_startup_v3' of github.com:cloudius-systems/seastar-dev:
scylla_setup: Check and report the scylla version
scylla-housekeeping: check version during setup
This patch adds a call to the scylla-housekeeping check version during
setup, so a warning will be printed if a newer version is available.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
"The prometheus project and its sub project does not have RPM/DEB packaging yet,
but it does have binaries for download.
This series adds an installation script that download install and run as a
service the node_exporter. For os that uses systemd it has a spec file ready
that will be package with the system. For ubuntu a service file will be created
when running the installer.
After this series running node_exporter_install a node_exporter will be running
as a service on the machine."
When there's no free disk, it asks to select disks from empty list:
"Please select disks from following list:
type 'done' to finish selection. selected:"
We should avoid to ask it, abort RAID setup instead.
Fixes#1673
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1474429218-28382-1-git-send-email-syuu@scylladb.com>
This adds the option to install node_exporter during setup.
The node_exporter export server information in the prometheus API.
It should be used when using the scylla prometheus API to get the server
information.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
node_exporter is a utility that export node information via prometheus
API. It takes care of host related metrics such as CPU and memory.
The install script, download the node_exporter binaries, create a link
in /usr/bin.
On OS with systemd supported it would enable and start the installed
service file to start as a service. On others (ubuntu) it would create a conf file and start it.
The installation should be done using sudo.
After a successful installation, the node_exporter would run as a
service.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
On posix_net_conf.sh's single queue NIC mode (which means RPS enabled mode), we are excluded cpu0 and it's sibling from network stack processing cpus, and assigned NIC IRQ to cpu0.
So always network stack is not working on cpu0 and it's sibling, to get better performance we need to exclude these cpus from scylla too.
To do this, we need to get RPS cpu mask from posix_net_conf.sh, pass it to scylla_cpuset_setup to construct /etc/scylla.d/cpuset.conf when scylla_setup executed.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472544875-2033-2-git-send-email-syuu@scylladb.com>
Right now scylla_prepare specifies -mq option to posix_net_conf.sh when number of RX queues > 1, but on posix_net_conf.sh it sets NIC mode to sq when queues < ncpus / 2.
So the logic is different, and actually posix_net_conf.sh does not need to specify -sq/-mq now, it autodetects queue mode.
So we need to drop detection logic from scylla_prepare, let posix_net_conf.sh to detect it.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472544875-2033-1-git-send-email-syuu@scylladb.com>
Files with a conf extension are run by the scylla_prepare on the AMI.
The scylla-housekeeping configuration file is not a bash script and
should not be run.
This patch changes its extension to cfg which is more python like.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1470896759-22651-2-git-send-email-amnon@scylladb.com>
"The series adds an optional configuration file to the scylla-housekeeping. The
file act as a way to prevent the scylla-housekeeping to run. A missing
configuration file, will make the scylla-housekeeping immediately.
The series adds a flag to the build_rpm that differentiate between public
distributions that would contain the configuration file and private
distributions that will not contain it which will cause the setup script to
create it."
When running the scylla_setup, the script would check that the
housekeeping configuration file: housekepping.conf exists.
If not, it would ask the user if to run the check version option or not
and create the file accordingly.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
The scylla-server.service will try to start the scylla-housekeeping.
This patch adds a question to the scylla_setup if to enable the version
check, if the answer is no, the scylla-housekeeping will be masked.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1468741129-1977-1-git-send-email-amnon@scylladb.com>
The scylla-jmx no longer shutdown itself. A better setup would be that
the it would be started when the scylla-server starts and that it would
shutdown when the scylla-server shutdown.
This patch do the scylla-server part of the change.
The scylla-server definition would Want the scylla-jmx.service so there
is no need to enable the scylla-jmx.service.
A patch to the scylla-jmx would cause it to shutdown when the scylla-jmx
shutsdown.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1467184502-4358-1-git-send-email-amnon@scylladb.com>
Since most of the time people are running scylla_setup on
a fully upgraded ubuntu 14.04 box, we rarely reach that
code path, but once we do we end up with an error. Let's
fix that.
Signed-off-by: Lucas Meneghel Rodrigues <lmr@scylladb.com>
Message-Id: <1466205496-3885-2-git-send-email-lmr@scylladb.com>
Commit f42673ed1e ("scylla_setup: Hide
busy block devices from RAID0 configuration") wasn't enumerating
anything. Additionally it listed from /dev/ and not /dev/dm which broke
the tests conditions.
This one uses blkid instead of /proc/partitions.
A follow up patch will be required to mask encrypted devices.
Signed-of-by: Benoît Canet <benoit@scylladb.com>
Message-Id: <1466059657-12377-1-git-send-email-benoit@scylladb.com>
This patch look in /proc/mount for the device name so
the device or it's subdevices will be excluded from the availables
RAID0 targets. It does the same with physical volume from device
mapper.
Fixes#1189
Message-Id: <1466001423-9547-4-git-send-email-benoit@scylladb.com>
These parameters are only required for AMI, not for non-AMI environment which want to enable SET_NIC, so split them to indivisual script / conf file, call it from AMI install script.
As Nadav pointed out, SETENV and sudo -E might be causes security hole:
https://github.com/scylladb/scylla/issues/1028#issuecomment-196202171
So drop them now, sourcing envfiles from scylla_prepare / scylla_stop scripts
instead.
Also on "[PATCH] ubuntu: Fix the init script variable sourcing" thread
we have problem to passing variables from envfiles to scylla_prepare /
scylla_stop on Ubuntu, it seems better to sourcing from these scripts.
Additionally, this fixes#1249
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1462989906-30062-1-git-send-email-syuu@scylladb.com>
Currently scylla_io_setup hardcoded to run iotune on /var/lib/scylla, but user may change data directory by modifying scylla.yaml, and it may on different block device.
So use scylla_config_get.py to get configuration from scylla.yaml, passes it to iotune.
Fixes#1167
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1462955824-21983-2-git-send-email-syuu@scylladb.com>
To parse scylla.yaml, scylla_config_get.py is added.
It can be use like 'scylla_config_get.py [key name]' from shell script, or command line.
This is needed for scylla_io_setup, to get 'data_file_directories' from shellscript.
Currently it does not supported to specify key name of nested data structure, but enough for scyll_io_setup.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1462955824-21983-1-git-send-email-syuu@scylladb.com>
Currently scylla_setup is unusable when user does not want to install scylla-jmx because it checks package unconditionally, but some users (or developers) does not want to install it, so let's ask to skip check or not on interactive prompt.
Also, scylla-tools package should installed for most of the case, added check code for the package.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1460662354-10221-1-git-send-email-syuu@scylladb.com>
