Currently Ubuntu 18.04 uses distribution provided g++ and boost, but it's easier
to maintain Scylla package to build with same version toolchain/libraries, so
switch to them.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1521075576-12064-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit 945e6ec4f6)
* 'debian-ubuntu-build-fixes-v2' of https://github.com/syuu1228/scylla:
dist/debian: build only scylla, iotune
dist/debian: switch to boost-1.65
dist/debian: switch to gcc-7.3
(cherry picked from commit bb4b1f0e91)
* dist/ami/files/scylla-ami 3aa87a7...5170011 (3):
> scylla_install_ami: install enhanced networking NIC drivers
> scylla_install_ami: set kernel-ml as default kernel
> scylla_install_ami: fix NIC down with enhanced networking on new base AMI
Since we splited scylla-housekeeping service to two different services for systemd, we don't share same service name between systemd and upstart anymore.
So handle it independently for each distribution, try to install
/etc/init/scylla-housekeeping.conf on Ubuntu 14.04.
Fixes#3239
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1519852659-10688-1-git-send-email-syuu@scylladb.com>
Support POWER architecture on Scylla.
Since DPDK is not fully supported on POWER (no PMD supported on it yet),
disabled it for now.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <20180228203048.21593-1-syuu@scylladb.com>
This patch takes a modified version of the Ubuntu 14.04 housekeeping
service script and uses it in Docker to validate the current version.
To disable the version validation, pass the --disable-version-check flag
when running the container.
Message-Id: <20180220161231.1630-1-amnon@scylladb.com>
Since we unconditionally running blkdiscard on disks, we may get ioctl error
message on some disks which does not support TRIM.
This can be ignore but it's bad UX, so let's skip running blkdiscard when TRIM
is not supported on the disk.
Fixes#2774
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1517992904-13838-1-git-send-email-syuu@scylladb.com>
We uses AmbientCapabilities directive on systemd unit, but it does not work
on older kernel, causes following error:
"systemd[5370]: Failed at step CAPABILITIES spawning /usr/bin/scylla: Invalid argument"
It only works on kernel-3.10.0-514 == CentOS7.3 or later, block installing rpm
to prevent the error.
Fixes#3176
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1517822764-2684-1-git-send-email-syuu@scylladb.com>
Currently we don't check data_file_directories existance before running iotune,
therefore it's shows unclear error message.
To make the message better, check the directory existance on scylla_io_setup.
Fixes#3137
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1517200647-6347-1-git-send-email-syuu@scylladb.com>
Since we sometimes recommend that the user update to a newer kernel,
it's good to compile support for features that the new kernel supports.
Rather than play games with build-time dependencies, just #define
those features in. It's ugly, but better than depending on third-party
repositories and handling package conflicts.
Message-Id: <20180115143129.22190-1-avi@scylladb.com>
Fixes argument misquoting at $SRPM_OPTS expansion for the mock commands
and makes the --jobs argument work as supposed.
Signed-off-by: Mika Eloranta <mel@aiven.io>
Message-Id: <20180113212904.85907-1-mel@aiven.io>
On Debian 9, 'pbuilder create' fails because of lack of GPG key for
3rdparty repo, so we need --allow-untrusted on 'pbuilder create' and
'pbuilder update'.
Also, apt-key adv --fetch-keys does not works correctly on it, but we can use
"curl <URL> | apt-key add -" as workaround.
Fixes#3088
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1513797714-18067-1-git-send-email-syuu@scylladb.com>
We provided "boost1.63" package for Debian 8 since we couldn't build
"scylla-boost163" package witch is available on Ubuntu14/16, but I fixed the
problem and now we have it for Debian 8 too, so switch to it.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1514220163-25985-1-git-send-email-syuu@scylladb.com>
We had switched our own CentOS base image since we couldn't make built AMI to
public due to base image settings, it's probably because the image provided via
AWS market place.
However, I've found an official image outside of market place, and I succeeded
making built AMI to public based on the image.
URL: https://wiki.centos.org/Cloud/AWS
Once we could able to use official image, we probably should use official one.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1513659164-28029-1-git-send-email-syuu@scylladb.com>
Currently scylla-housekeeping-daily.service/-restart.service hardcoded
"--repo-files '/etc/yum.repos.d/scylla*.repo'" to specify CentOS .repo file,
but we use same .service for Ubuntu/Debian.
It doesn't work correctly, we need to specify .list file for Debian variants.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1513385159-15736-1-git-send-email-syuu@scylladb.com>
Since pbuilder chroot environment does not install CA certificates by default,
accessing https://download.opensuse.org will cause certificate verification
error.
So we need to install it before installing 3rdparty repo GPG key.
Also, checking existance of gpgkeys_curl is not needed, since it's always
not installed since we are running the script in clean chroot environment.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1512517001-27524-1-git-send-email-syuu@scylladb.com>
Our external repos are already signed repo, so let's enable secure-apt.
Seems like more recent version of Ubuntu (tested on 18.04) does not accept
skipping GPG check, so we need it anyway in near future.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Now we can cross build our .rpm/.deb packages, so let's extend AMI build script
to support cross build, too.
Also Ubuntu 16.04 support added, since it's latest Ubuntu LTS release.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1510247204-2899-1-git-send-email-syuu@scylladb.com>
We are getting package build error on dh_auto_install which is invoked by
pybuild.
But since we handle all installation on debian/scylla-server.install, we can
simply skip running dh_auto_install.
Fixes#3036
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1512065117-15708-1-git-send-email-syuu@scylladb.com>
Since we want to support cross building, we shouldn't hardcode GPG file path,
even these files provided on recent version of mock.
This fixes build error on some older build environment such as CentOS-7.2.
Fixes#3002
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1511277722-22917-1-git-send-email-syuu@scylladb.com>
Switch Debian 3rdparty packages to our OBS repo
(https://build.opensuse.org/project/subprojects/home:scylladb).
We don't use 3rdparty packages on dist/debian/dep, so dropped them.
Also we switch Debian to gcc-7.2/boost-1.63 on same time.
Due to packaging issues following packages doesn't renamed our 3rdparty
package naming rule for now:
- gcc-7: renamed as 'xxx-scylla72', instead of scylla-xxx-72.
- boost1.63: doesn't renamed, also doesn't changed prefix to /opt/scylladb
Message-Id: <1510952411-20722-1-git-send-email-syuu@scylladb.com>
