Currently housekeeping timer won't be reset when we restart scylla-server.
We expect the service to be run at each start, it will be consistent with
upstart script in Ubuntu 14.04
When we restart scylla-server, housekeepting timer will also be restarted,
so let's replace "OnBootSec" with "OnActiveSec".
Fixes: #1601
Signed-off-by: Amos Kong <amos@scylladb.com>
Message-Id: <a22943cc11a3de23db266c52fd476c08014098c4.1480607401.git.amos@scylladb.com>
To reduce duplicated code and simplified scripts introduce scylla_lib.sh
for shellscripts which provides functions to classify distributions,
and load all sysconfig files.
This also fixes script bugs to misdetect Debian and RHEL.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1480667672-9453-2-git-send-email-syuu@scylladb.com>
This fix splits build_ami.sh --repo to three different options:
--repo-for-install is for Scylla package installation, only valid
during AMI construction.
--repo-for-update will be stored at /etc/yum.repos.d/scylla.repo, to
receive update package on AMI.
--repo is both, for installation and update.
Fixes#1872
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1480438858-6007-1-git-send-email-syuu@scylladb.com>
We supported install CentOS7 .rpm on RHEL7, but we haven't supported
building on RHEL7, since there is little difference between CentOS,
and that causes build error.
This patch fixes the error, now we can produce .rpm for RHEL7 wihout
using CentOS.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1479431134-8032-1-git-send-email-syuu@scylladb.com>
We were ignored --smp option taken from io.conf since iotune didn't supported
it, but now it supported we can pass it.
(We need to pass it because we need to measure io performance on same condition
with scylla)
Fixes#1768
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1478082591-27205-1-git-send-email-syuu@scylladb.com>
EC2 paravirtual instances uses pv-grub, which refers /boot/grub/menu.lst (grub0.9x config file) instead of grub2 config file.
So add boot parameters on /boot/grub/menu.lst when the file exists, and the instance is on EC2.
Fixes#1598
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472056875-17512-1-git-send-email-syuu@scylladb.com>
wget is often used from scripts recording to logs; as it emits a log
line every second, the logs are huge and unreadable. Make it quieter.
Message-Id: <1477558534-32718-1-git-send-email-avi@scylladb.com>
The current chunk size of 256 gives a 50% probability of a 128k read or
write getting split into two accesses. This reduces efficiency and
increases latency.
Change the chunk size to 1MB, with a 12% probability of cross-member
access.
Message-Id: <1476269082-2473-1-git-send-email-avi@scylladb.com>
Since Debian 8(jessie) does not provides g++-5, we frequently got compile error
because we are using older compiler.
To fix the problem, backport g++-5 from Debian 9(stretch).
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476694318-10640-3-git-send-email-syuu@scylladb.com>
On Debian, lsb_release -r returns the version number something like '8.6'.
However, on this script we want to check major version only.
Therefore we can use VERSION_ID from /etc/os-release which only contains
major version number.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476694318-10640-2-git-send-email-syuu@scylladb.com>
The expected behaviour in the scylla_setup script is that a question
will be followed by the answer.
For example, after asking if the scylla should be run as a service the
relevant actions will be taken before the following question.
This patch address two such mis-orders:
1. the scylla-housekeeping depends on the scylla-server, but the
setup should first setup the scylla-server service and only then ask
(and install if needed) the scylla-housekeeping.
2. The node_exporter should be placed after the io_setup is done.
Fixes#1739
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1476370098-25617-1-git-send-email-amnon@scylladb.com>
"This series address two issues that interfere with running the node_exporter as a service in ubuntu 16.
1. The service file should be packed in the deb file
2. When setting the node_exporter as a service it doesn't need to run with scylla use"
* 'amnon/node_exporter_ubuntu_v2' of github.com:cloudius-systems/seastar-dev:
node-exporter service: No need to run as scylla user
debian package: Include the node_exporter service file
the node-exporter does not need to run as scylla user. It can run
without scylla or without the scylla user being configure.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
The script mistakenly split value at "," when cpuset list is separated
by comma. Instead of matching possible patterns of the argument, let's
pass all characters until reach to space delimiter or end of line.
Fixes#1716
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476171037-32373-1-git-send-email-syuu@scylladb.com>
"The version is taken from the installation rather than the API, a mode command
line indicated that this is part of the setup and uuid is used for the
interaction with the checkversion server."
* 'amnon/check_version_on_startup_v3' of github.com:cloudius-systems/seastar-dev:
scylla_setup: Check and report the scylla version
scylla-housekeeping: check version during setup
In order to allow Scylla’s docker container to handle multiple network
interfaces, the start-scylla script was refactored:
- `$IP` is now called `$SCYLLA_LISTEN_ADDRESS`, so it is less likely to
be confused or interfere with other environment variables.
- `$SCYLLA_LISTEN_ADDRESS` now checks its value and also tries to
resolve a hostname, if no IP was set to it.
- `$SCYLLA_LISTEN_DEVICE` can now be set as environment variable and
contain any available NIC device name (e.g. `eth0`). The script
automatically retrieves the IP address from the device.
Usage:
1. With `$SCYLLA_LISTEN_ADDRESS` as IP:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_ADDRESS=192.168.1.100 scylladb/scylla`
2. With `$SCYLLA_LISTEN_ADDRESS` as hostname:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_ADDRESS=containername.network.lan scylladb/scylla`
3. With `$SCYLLA_LISTEN_DEVICE`:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_DEVICE=eth0 scylladb/scylla`
Message-Id: <20161003151230.67672-1-marius@twostairs.com>
This patch adds a call to the scylla-housekeeping check version during
setup, so a warning will be printed if a newer version is available.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
