Constants related to managing resources are moved to newly created
resource_manager class. Later, this class will be used to manage
(potentially shared) resources of hints managers.
Collections are not going to be fully converted to the IMR just yet and
still use the old serialisation format. This means that they still don't
support fragmented values very well. This patch passes the information
when an atomic_cell is created as a member of a collection so that later
we can avoid fragmenting the value in such cases.
As a prepratation for the switch to the new cell representation this
patch changes the type returned by atomic_cell_view::value() to one that
requires explicit linearisation of the cell value. Even though the value
is still implicitly linearised (and only when managed by the LSA) the
new interface is the same as the target one so that no more changes to
its users will be needed.
Apache Cassandra handles a case where the node hasn't joined the ring
and may consequentially have an outdated view of it. Following the same
reasoning as with the previous patch, we ignore this scenario. It
happens when there are range movements, and this node is bootstrapping,
but there are already other mechanisms in the cluster, such as hinted
handoff and dual-writing to replicas during range movements, that
contribute to this update eventually making its way to the view.
This patch doesn't change any behavior, but it provides the reasoning
why we won't use the batchlog as Cassandra does, or the hinted handoff
log as we will, to later send the update when the node is joined (note
that Cassandra just sends the mutations "later", and doesn't check
again for any condition or change).
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
If no view replica is paired with the current base replica, it means
there's a range movement going on (decommission or move), such that
this base replica is gaining new token ranges. The current node is
thus a pending_endpoint from the POV of the coordinator that sent the
request.
Sending view updates to the view replica this base will eventually be
paired with only makes a difference when the base update didn't make
it to the node which is currently being decommissioned or moved-from.
The update will, however, make it to that node if HH is enabled at the
coordinator, before the range movement finishes, or later to this node
when it becomes a natural endpoint for the token.
We still ensure we send to any pending view endpoints though, at least
until we handle that case more optimally.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
"
This patchset makes all users of query_processor specify their timeouts
explicitly, in preparation for the removal of
cql_statement::execute_internal() (whose main function was to override
timeouts).
"
* tag 'cql-explicit-timeouts/v1' of https://github.com/avikivity/scylla:
query_processor: require clients to specify timeout configuration
query_processor: un-default consistency level in make_internal_options
This commit adapts view_stats structure so it can be passed
to storage_proxy as write stats. Thanks to that, mv replica updates
will not interfere with user write metrics. As a side effect it also
provides more stats to replica view updates.
Closes#3385Closes#3416
This commit adds statistics to row_locker class. Metrics are
independendly counted for all lock types: row<->partition and
exclusive<->shared.
Metrics gathered:
- total acquisitions
- operations that wait on the lock
- histogram of the time spent on waiting on this type of lock
References #3385
References #3416
This commit introduces view statistics:
- updates pushed to local/remote replicas
- updates failed to be pushed to local/remote replicas
Metrics are kept on per-table basis, i.e. updates_pushed_remote
shows the number of total updates (mutations) pushed to all paired
mv replicas that this particular table has.
Every single update is taken into consideration, so if view update
requires removing a row from one view and adding a row to another,
it will be counted as 2 updates.
References #3385
References #3416
Fixes#3446
Previously, only shutdown-synced objects where actually closed,
which is wrong.
This introduces yet another queue, processed together with the
deletion objects, which ensures we explicitly close all objects
that have been discarded.
Message-Id: <20180521140456.32100-1-calle@scylladb.com>
We are currently moving the pointer we acquired to the segment inside
the lambda in which we'll handle the cycle.
The problem is, we also use that same pointer inside the exception
handler. If an exception happens we'll access it and we'll crash.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20180518125820.10726-1-glauber@scylladb.com>
Remove implicit timeouts and replace with caller-specified timeouts.
This allows removing the ambiguity about what timeout a statement is
executed with, and allows removing cql_statement::execute_internal(),
which mostly overrode timeouts and consistency levels.
Timeout selection is now as follows:
query_processor::*_internal: infinite timeout, CL=ONE
query_processor::process(), execute(): user-specified consisistency level and timeout
All callers were adjusted to specify an infinite timeout. This can be
further adjusted later to use the "other" timeout for DCL and the
read or write timeout (as needed) for authentication in the normal
query path.
Note that infinite timeouts don't mean that the query will hang; as
soon as the failure detector decides that the node is down, RPC
responses will termiante with a failure and the query will fail.
"
This patchset implements separate timeouts for range queries, and lays
the foundations for separate timeouts for other query types.
While the feature in itself is worthy, the real motivation is to have
the timeouts decided by the caller, instead of storage_proxy. This in
turn is required to disentangle each layer behaving differently
depending on whether the query is internal or not; instead, the goal
is to have each caller declare its needs in terms of consistency level
and timeouts, and have the lower layers implement its requirements
instead of making their own decisions.
Fixes#3013.
Tests: unit (release)
"
* tag '3013/v1.1' of https://github.com/avikivity/scylla:
storage_proxy: remove default_query_timeout()
storage_proxy: don't use default timeouts
query_options: augment with timeout_config
thrift: configure thrift transport and handler with a timeout_config
transport: configure native transport with a timeout_config
cql3: define and populate timeout_config_selector
timeout_config: introduce timeout configuration
The switch to the new in-memory representation will require a larger
parts of the logic be aware of the type of the values they are dealing
with. In most cases it is not a significant burden for the users.
When node is decommissioned/removed it will drain all its hints and all
remote nodes that have hints to it will drain their hints to this node.
What "drain" means? - The node that "drains" hints to a specific
destination will ignore failures and will continue sending hints till the end
of the current segment, erase it and move to the next one till there are
no more segments left.
After all hints are drained the corresponding hints directory is removed.
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
Returning a future with an exception from end_point_manager::stop()
is practically useless because the best the caller can do is to log
it and continue as if it didn't happen because it has other things
to shut down.
Therefore in order to simplify the caller we will log the exception
if it happens and will always return a non-exceptional future.
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
This ensures we respect the write timeout set by the client when
applying base writes, in case a writes takes too long to acquire the
row lock for the read-before-write phase of a materialized view
update.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20180507132755.8751-1-duarte@scylladb.com>
This commit makes database, sstables and tests aware
of which large_partition_handler they use.
Proper large_partition_handler is retrievable from config information
and is based on existing compaction_large_partition_warning_threshold_mb
entry. Right now CQL TABLE variant of large_partition_handler is used
in the database.
Tests use a NOP version of large_partition_handler, which does not
depend on CQL queries at all.
This commit introduces large_partition_handler class, which can be used
to take additional action when large partitions are written.
It comes with two implementations:
* NOP, used in tests, which does nothing on large partition
update/delete
* CQL TABLE, which inserts/deletes information on particular sstable
to system.large_partitions table, in order to be retrievable from
cqlsh later.
References #3292
This commit adds a system.large_partitions table, which can be used
to trace largest partitions of a cluster.
Schema: (
keyspace_name text,
table_name text,
sstable_name text,
partition_size bigint,
key text,
compaction_time timestamp,
PRIMARY KEY((keyspace_name, table_name), sstable_name, partition_size, key)
) WITH CLUSTERING ORDER BY (partition_size DESC);
References #3292
The db/index directory contains just a few lines of code that exists
there for historical reasons. It's confusing that we have both db/index
and index/ directory related to secondary-indexing.
This patch moves what little is still in db/index/ to index/. In the
future we should probably get rid of the "secondary_index" class we had
there, but for now, let's at least not have a whole new directory for it.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20180501101246.21143-1-nyh@scylladb.com>
We had another case-sensitivity bug in materialized views, where if
a case-sensitive (quoted) column name was listed explicitly on "SELECT"
(instead of implicitly, e.g., in "SELECT *") the column name was
incorrectly folded to lower-case and inserts would fail.
This patch fixes the code, where a "SELECT" statement was built using
the desired column names, but column names that needed quoting were
not being quoted. The bug was in a helper function build_select_statement()
which took column name strings and failed to quote them. We clean up this
function to take column definitions instead of strings - and take care
of the quoting itself. It also needs to quote the table's name in the
select statement being built.
Fixes#3391.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20180429221857.6248-6-nyh@scylladb.com>
After upgrade from 1.7 to 2.0, nodes will record a per-table schema
version which matches that on 1.7 to support the rolling upgrade. Any
later schema change (after the upgrade is done) will drop this record
from affected tables so that the per-table schema version is
recalculated. If nodes perform a schema pull (they detect schema
mismatch), then the merge will affect all tables and will wipe the
per-table schema version record from all tables, even if their schema
did not change. If then only some nodes get restarted, the restarted
nodes will load tables with the new (recalculated) per-table schema
version, while not restarted nodes will still use the 1.7 per-table
schema version. Until all nodes are restarted, writes or reads between
nodes from different groups will involve a needless exchange of schema
definition.
This will manifest in logs with repeated messages indicating schema
merge with no effect, triggered by writes:
database - Schema version changed to 85ab46cd-771d-36c9-bc37-db6d61bfa31f
database - Schema version changed to 85ab46cd-771d-36c9-bc37-db6d61bfa31f
database - Schema version changed to 85ab46cd-771d-36c9-bc37-db6d61bfa31f
The sync will be performed if the receiving shard forgets the foreign
version, which happens if it doesn't process any request referencing
it for more than 1 second.
This may impact latency of writes and reads.
The fix is to treat schema changes which drop the 1.7 per-table schema
version marker as an alter, which will switch in-memory data
structures to use the new per-table schema version immediately,
without the need for a restart.
Fixes#3394
Tests:
- dtest: schema_test.py, schema_management_test.py
- reproduced and validated the fix with run_upgrade_tests.sh from git@github.com:tgrabiec/scylla-dtest.git
- unit (release)
Message-Id: <1524764211-12868-1-git-send-email-tgrabiec@scylladb.com>
Fixes#3187
Requires seastar "inet_address: Add constructor and conversion function
from/to IPv4"
Implements support IPv6 for CQL inet data. The actual data stored will
now vary between 4 and 16 bytes. gms::inet_address has been augumented
to interop with seastar::inet_address, though of course actually trying
to use an Ipv6 address there or in any of its tables with throw badly.
Tests assuming ipv4 changed. Storing a ipv4_address should be
transparent, as it now "widens". However, since all ipv4 is
inet_address, but not vice versa, there is no implicit overloading on
the read paths. I.e. tests and system_keyspace (where we read ip
addresses from tables explicitly) are modified to use the proper type.
Message-Id: <20180424161817.26316-1-calle@scylladb.com>
When a view's PK only contains the columns that form the base's PK,
then the liveness of a particular view row is determined not only by
the base row's marker, but also by the selected and, more importantly,
unselected columns.
This patch ensures that unselected columns are considered as much as
possible, even though some limitations will still exist. In
particular, we need to represent multiple timestamps (from all the
unselected columns), but have only mechanisms to record a single
timestamp.
We also have some issues when dealing with selected column, and the
way we currently delete them. Consider the following:
create table cf (p int, c int, a int, b int, primary key (p, c))
create materialized view vcf as select a, b
from cf where p is not null and c is not null
primary key (p, c)
1) update cf using timestamp 10 set a = 1 where p = 1 and c = 1
2) delete a from cf using timestamp 11 where p = 1 and c = 1
3) update cf using timestamp 1 set a = 2 where p = 1 and c = 1
After 1), the MV should include a row with row marker @ ts10,
p = 1, c = 1, a = 1. After 2), this row should be removed.
At 3), we should add a row with row marker @ ts1, p = 1, c = 1, a = 1,
with a lower timestamp. This means that the delete should not
insert a row tombstone with timestamp @ 11, as we do now but it should
just delete the view's row marker (which exists) with ts1.
Refs #3362Fixes#3140Fixes#3361
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
When views contain a primary key column that is not part of the base
table primary key, that column determines whether the row is live or
not. We need to ensure that when that cell is dead, and thus the
derived row marker, either by normal deletion of by TTL, so is the
rest of the row.
This patch introduces the idea of shawdowing row marker. We map the
status of the regular base column in the view's PK to the view row's
marker. If this marker is dead, so is that cell in the base table, and
so should the view row become. To enforce that, a view row's dead
marker shadows the whole row if that view includes a base regular
column in its PK.
Fixes#3360
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
When a view's PK only contains the columns that form the base's PK,
then the liveness of a particular view row is determined not only by
the base row's marker, but also by the selected and, more importantly,
unselected columns. When calculating the view's row marker we need
to access those unselected columns, so we can't avoid the
read-before-write as we were doing.
Refs #3362
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
When a view's PK only contains the columns that form the base's PK,
then the liveness of a particular view row is determined not only by
the base row's marker, but also by the selected and, more importantly,
unselected columns. So, process base updates to columns unselected by
any of its views.
Refs #3362
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Not adding the partition tombstone to the current list of tombstones
may cause updates to be incorrectly generated.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Instead of lazily-initializing the regular base column in the view's
PK field, explicitly initialize it. This will be used by future
patches that don't have access to the schema when wanting to obtain
that column.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
"
Pass sstable version to parse, write and describe_type methods to make it possible to handle different versions.
For now serialization header from 3.x format is ignored.
Tests: units (release)
"
* 'haaawk/sstables3/loading_v3' of ssh://github.com/scylladb/seastar-dev:
Add test for loading the whole sstable
Add test for loading statistics
Add support for 3_x stats metadata
Pass sstable version to describe_type
Pass sstable version to write methods
metadata_type: add Serialization type
Pass sstable_version_types to parse methods
Add test for reading filter
Add test for read_summary
sstables 3.x: Add test for reading TOC
sstable: Make component_map version dependent
sstable::component_type: add operator<<
Extract sstable::component_type to separete header
Remove unused sstable::get_shared_components
sstable_version_types: add mc version
Since storage_proxy provides access to the entire cluster, a local shard
reference is sufficient. Adjust query_processor to store a reference to
just the local shard, rather than a seastar::sharded<storage_proxy> and
adjust callers.
This simplifies the code a little.
Message-Id: <20180415142656.25370-3-avi@scylladb.com>
"
Fixes to the view building process, discovered from field experience.
Tests: dtest(materialized_view_tests.py, smp=2)
"
* 'views/view-build-fixes/v1' of https://github.com/duarten/scylla:
db/view: Start view building after schema agreement
db/system_keyspace: scylla_views_builds_in_progress writes are user mem
db/view: Require configuration option to enable view building
