When learning a schema that has a linked cdc schema, we need to learn
also the cdc schema, and at the end the schema should point to the
learned cdc schema.
This is needed because the linked cdc schema is used for generating cdc
mutations, and when we process the mutations later it is assumed in some
places that the mutation's schema has a schema registry entry.
We fix a scenario where we could end up with a schema that points to a
cdc schema that doesn't have a schema registry entry. This could happen
for example if the schema is loaded before it is learned, so when we
learn it we see that it already has an entry. In that case, we need to
set the cdc schema to the learned cdc schema as well, because it could
have been loaded previously with a cdc schema that was not learned.
Fixesscylladb/scylladb#27610Closesscylladb/scylladb#27704
Add to the schema object a member that points to the CDC schema object
that is compatible with this schema, if any.
The compatible CDC schema is created and altered with its base schema in
the same group0 operation.
When generating CDC log mutations for some base mutation we want them to
be created using a compatible schema thas has a CDC column corresponding
to each base column. This change will allow us to find the right CDC
schema given a base mutation.
We also update the relevant structures in the schema registry that are
related to learning about schemas and transporting schemas across
shards or nodes.
When transporting a schema as frozen_schema, we need to transport the
frozen cdc schema as well, and set it again when unfreezing and
reconstructing the schema.
When adding a schema to the registry, we need to ensure its CDC schema
is added to the registry as well.
Currently we always set the CDC schema to nullptr and maintain the
previous behavior. We will change it in a later commit. Until then, we
mark all places where CDC schema is passed clearly so we don't forget
it.
Change the schema loader type in the schema_registry to return a
extended_frozen_schema instead of view_schema_and_base_info, and
remove view_schema_and_base_info which is not used anymore.
The casting between them is trivial.
Instead of requesting it from gms code, create it "by hand" with the
help of get_disabled_features_from_db_config() method. This is how other
services are configured by main/tools/testing code.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This change is preparing ground for state update unification for raft bound subsystems. It introduces schema_applier which in the future will become generic interface for applying mutations in raft.
Pulling database::apply() out of schema merging code will allow to batch changes to subsystems. Future generic code will first call prepare() on all implementations, then single database::apply() and then update() on all implementations, then on each shard it will call commit() for all implementations, without preemption so that the change is observed as atomic across all subsystems, and then post_commit().
Backport: no, it's a new feature
Fixes: https://github.com/scylladb/scylladb/issues/19649
Fixes https://github.com/scylladb/scylladb/issues/24531Closesscylladb/scylladb#24886
[avi: adjust for std::vector<mutations> -> utils::chunked_vector<mutations>]
* github.com:scylladb/scylladb:
test: add type creation to test_snapshot
storage_service: always wake up load balancer on update tablet metadata
db: schema_applier: call destroy also when exception occurs
db: replica: simplify seeding ERM during shema change
db: remove cleanup from add_column_family
db: abort on exception during schema commit phase
db: make user defined types changes atomic
replica: db: make keyspace schema changes atomic
db: atomically apply changes to tables and views
replica: make truncate_table_on_all_shards get whole schema from table_shards
service: split update_tablet_metadata into two phases
service: pull out update_tablet_metadata from migration_listener
db: service: add store_service dependency to schema_applier
service: simplify load_tablet_metadata and update_tablet_metadata
db: don't perform move on tablet_hint reference
replica: split add_column_family_and_make_directory into steps
replica: db: split drop_table into steps
db: don't move map references in merge_tables_and_views()
db: introduce commit_on_shard function
db: access types during schema merge via special storage
replica: make non-preemptive keyspace create/update/delete functions public
replica: split update keyspace into two phases
replica: split creating keyspace into two functions
db: rename create_keyspace_from_schema_partition
db: decouple functions and aggregates schema change notification from merging code
db: store functions and aggregates change batch in schema_applier
db: decouple tables and views schema change notifications from merging code
db: store tables and views schema diff in schema_applier
db: decouple user type schema change notifications from types merging code
service: unify keyspace notification functions arguments
db: replica: decouple keyspace schema change notifications to a separate function
db: add class encapsulating schema merging
There is already implicit logical dependency via migration_notifier
but in the next commits we'll be moving store_service out from it
as we need better control (i.e. return a value from the call).
This reverts commit 0b516da95b, reversing
changes made to 30199552ac. It breaks
cluster.random_failures.test_random_failures.test_random_failures
in debug mode (at least).
Fixes#24513
There is already implicit logical dependency via migration_notifier
but in the next commits we'll be moving store_service out from it
as we need better control (i.e. return a value from the call).
Due to the changes in creating schemas with base info the
test_schema_is_recovered_after_dying seems to be flaky when checking
that the schema is actually lost after 'grace_period'. We don't
actually guarantee that the the schema will be lost at that exact
moment so there's no reason to test this. To remove the flakiness,
we remove the check and the related sleep, which should also slightly
improve the speed of this test.
In the previous commits we made sure that the base info is not dependent
on the base schema version, and the info dependent on the base schema
version is calculated when it's needed. In this patch we remove the
unnecessary re-setting of the base_info.
The set_base_info method isn't removed completely, because it also has
a secondary function - zeroing the view_info fields other than base_info.
Because of this, in this patch we rename it accordingly and limit its
use to the updates caused by a base schema change.
In the following patch we plan to remove the base schema from the base_info
to make the base_info immutable. To do that, we first prepare the schema
registry for the change; we need to be able to create view schemas from
frozen schemas there and frozen schemas have no information about the base
table. Unless we do this change, after base schemas are removed from the
base info, we'll no longer be able to load a view schema to the schema registry
without looking up the base schema in the database.
This change also required some updates to schema building:
* we add a method for unfreezing a view schema with base info instead of
a base schema
* we make it possible to use schema_builder with a base info instead of
a base schema
* we add a method for creating a view schema from mutations with a base info
instead of a base schema
* we add a view_info constructor withat base info instead of a base schema
* we update the naming in schema_registry to reflect the usage of base info
instead of base schema
Currently, the base_info may or may not be set in view schemas.
Even when it's set, it may be modified. This necessitates extra
checks when handling view schemas, as well as potentially causing
errors when we forget to set it at some point.
Instead, we want to make the base info an immutable member of view
schemas (inside view_info). The first step towards that is making
sure that all newly created schemas have the base info set.
We achieve that by requiring a base schema when constructing a view
schema. Unfortunately, this adds complexity each time we're making
a view schema - we need to get the base schema as well.
In most cases, the base schema is already available. The most
problematic scenario is when we create a schema from mutations:
- when parsing system tables we can get the schema from the
database, as regular tables are parsed before views
- when loading a view schema using the schema loader tool, we need
to load the base additionally to the view schema, effectively
doubling the work
- when pulling the schema from another node - in this case we can
only get the current version of the base schema from the local
database
Additionally, we need to consider the base schema version - when
we generate view updates the version of the base schema used for
reads should match the version of the base schema in view's base
info.
This is achieved by selecting the correct (old or new) schema in
`db::schema_tables::merge_tables_and_views` and using the stored
base schema in the schema_registry.
In this patch we test the behavior of schema registry in a few
scenarios where it was identified it could misbehave.
The first one is reverse schemas for views. Previously, SELECT
queries with reverse order on views could fail because we didn't
have base info in the registry for such schemas.
The second one is schemas that temporarily died in the registry.
This can happen when, while processing a query for a given schema
version, all related schema_ptrs were destroyed, but this schema
was requested before schema_registry::grace_period() has passed.
In this scenario, the base info would not be recovered, causing
errors.
Currently, when we load a frozen schema into the registry, we lose
the base info if the schema was of a view. Because of that, in various
places we need to set the base info again, and in some codepaths we
may miss it completely, which may make us unable to process some
requests (for example, when executing reverse queries on views).
Even after setting the base info, we may still lose it if the schema
entry gets deactivated.
To fix this, this patch adds the base schema to the registry, alongside
the view schema. With the base schema, we can now set the base
info when returning the schema from the registry. As a result, we can now
assume that all view schemas returned by the registry have base_info set.
To store the base schema, the loader methods now have to return the base
schema alongside the view schema. At the same time, when loading into
the registry, we need to check whether we're loading a view schema, and if
so, we need to also provide the base schema. When inserting a regular table
schema, the base schema should be a disengaged optional.
To reduce test executable size and speed up compilation time, compile unit
tests into a single executable.
Here is a file size comparison of the unit test executable:
- Before applying the patch
$ du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
11G build/release/test/boost/
29G build/debug/test/boost/
- After applying the patch
du -h --exclude='*.o' --exclude='*.o.d' build/release/test/boost/ build/debug/test/boost/
5.5G build/release/test/boost/
19G build/debug/test/boost/
It reduces executable sizes 5.5GB on release, and 10GB on debug.
Closes#9155Closesscylladb/scylladb#21443
It's mostly self containted and it's easier to
maintain reasonably sized files. Also splitting
better shows boundaries between schema and
schema merging code.
feature_service.hh is a high-level header that integrates much
of the system functionality, so including it in lower-level headers
causes unnecessary rebuilds. Specifically, when retiring features.
Fix by removing feature_service.hh from headers, and supply forward
declarations and includes in .cc where needed.
Closesscylladb/scylladb#18005
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Schema digest is calculated by querying for mutations of all schema
tables, then compacting them so that all tombstones in them are
dropped. However, even if the mutation becomes empty after compaction,
we still feed its partition key. If the same mutations were compacted
prior to the query, because the tombstones expire, we won't get any
mutation at all and won't feed the partition key. So schema digest
will change once an empty partition of some schema table is compacted
away.
Tombstones expire 7 days after schema change which introduces them. If
one of the nodes is restarted after that, it will compute a different
table schema digest on boot. This may cause performance problems. When
sending a request from coordinator to replica, the replica needs
schema_ptr of exact schema version request by the coordinator. If it
doesn't know that version, it will request it from the coordinator and
perform a full schema merge. This adds latency to every such request.
Schema versions which are not referenced are currently kept in cache
for only 1 second, so if request flow has low-enough rate, this
situation results in perpetual schema pulls.
After ae8d2a550d, it is more liekly to
run into this situation, because table creation generates tombstones
for all schema tables relevant to the table, even the ones which
will be otherwise empty for the new table (e.g. computed_columns).
This change inroduces a cluster feature which when enabled will change
digest calculation to be insensitive to expiry by ignoring empty
partitions in digest calculation. When the feature is enabled,
schema_ptrs are reloaded so that the window of discrepancy during
transition is short and no rolling restart is required.
A similar problem was fixed for per-node digest calculation in
18f484cc753d17d1e3658bcb5c73ed8f319d32e8. Per-table digest calculation
was not fixed at that time because we didn't persist enabled features
and they were not enabled early-enough on boot for us to depend on
them in digest calculation. Now they are enabled before non-system
tables are loaded so digest calculation can rely on cluster features.
Fixes#4485.
This will make it easier to access table proprties in places which
only have schema_ptr. This is in particular useful when replacing
dht::shard_of() uses with s->table().shard_of(), now that sharding is
no longer static, but table-specific.
Also, it allows us to install a guard which catches invalid uses of
schema::get_sharder() on tablet-based tables.
It will be helpful for other uses as well. For example, we can now get
rid of the static_props hack.
Schema related files are moved there. This excludes schema files that
also interact with mutations, because the mutation module depends on
the schema. Those files will have to go into a separate module.
Closes#12858
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
The latter is pretty popular test/lib header that disseminates the
former one over whole lot of unit tests. The former, in turn, naturally
includes sstables.hh thus making tons of unrelated tests depend on
sstables class unused by them.
However, simple removal doesn't work, becase of local_shard_only bool
class definition in sstable_utils.hh used in simple_schema.hh. This
thing, in turn, is used in keys making helpers that don't belong to
sstable utils, so these are moved into simple_schema as well.
When done, this affects the mutation_source_test.hh, which needs the
local_shard_only bool class (and helps spreading the sstables.hh
throughout more unrelated tests) and a bunch of .cc test sources that
used sstable_utils.hh to indirectly include various headers of their
demand.
After patching, sstables.hh touches 2x times less tests. As a side
effect the sstables_manager.hh also becomes 2x times less dependent
on by tests.
Continuation of 9bdea110a6
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#12240
The user types storage is needed in cql_type_parser::parse which is in
turn called with either replica::database or scema_ctxt at hand.
To facilitate the former case replica::database has its own user types
storage created in database constructor.
The latter case is a bit trickier. In many cases the ctxt is created as
a temporary object and the database is available at those places. Also
the ctxt object lives on the schema_registry instance which doesn't have
database nearby. However, that ctxt lifetime is the same as the registry
instance one and when it's created there's a database at hand (it's the
database constructor that calls schema_registry.init() passing "this"
into it). Thus, the solution is to make database's user types storage be
a shared pointer that's shared between database itself and all the ctxts
out there including the one that lives on schema_registry instance.
When database goes away it .deactivate()s its user types storage so that
any ctxts that may share it stay on the safe side and don't use database
after free. This part will go away when the schema_registry will be
deglobalized.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
seastar::later() was recently deprecated and replaced with two
alternatives: a cheap seastar::yield() and an expensive (but more
powerful) seastar::check_for_io_immediately(), that corresponds to
the original later().
This patch replaces all later() calls with the weaker yield(). In
all cases except one, it's unambiguously correct. In one case
(test/perf scheduling_latency_measurer::stop()) it's not so ambiguous,
since check_for_io_immediately() will additionally force a poll and
so will cause more work to be done (but no additional tasks to be
executed). However, I think that any measurement that relies on
the measuring the work on the last tick to be inaccurate (you need
thousands of ticks to get any amount of confidence in the
measurement) that in the end it doesn't matter what we pick.
Tests: unit (dev)
Closes#9904
The purpose of the class in question is to start sharded storage
service to make its global instance alive. I don't know when exactly
it happened but no code that instantiates this wrapper really needs
the global storage service.
Ref: #2795
tests: unit(dev), perf_sstable(dev)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Message-Id: <20210526170454.15795-1-xemul@scylladb.com>
"
This patch set rearranges the test files so that
it is now possible to search for tests automatically,
and adds this functionality to test.py
"
* 'test.py.requeue' of ssh://github.com/scylladb/scylla-dev:
cmake: update CMakeLists.txt to scan test/ rather than tests/
test.py: automatically lookup all unit and boost tests
tests: move all test source files to their new locations
tests: move a few remaining headers
tests: move another set of headers to the new test layout
tests: move .hh files and resources to new locations
tests: remove executable property from data_listeners_test.cc
1. Move tests to test (using singular seems to be a convention
in the rest of the code base)
2. Move boost tests to test/boost, other
(non-boost) unit tests to test/unit, tests which are
expected to be run manually to test/manual.
Update configure.py and test.py with new paths to tests.
