since we've switched almost all callers of the operator<< to {fmt},
let's drop the unused operator<<:s.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
before this change, we rely on the default-generated fmt::formatter
created from operator<<, but fmt v10 dropped the default-generated
formatter.
in this change, we define formatters for `gms::application_state`,
but its operator<< is preserved, as it is still used by the generic
homebrew formatter for `std::unordered_map<>`.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#17096
It is equal to (if present) HOST_ID and no longer used for anything.
The application state was only gossiped if `experimental-features`
contained `raft`, so we can free this slot.
Similarly, `raft_server_id`s were only persisted in `system.peers` if
the `SUPPORTS_RAFT` cluster feature was enabled, which happened only
when `experimental-features` contained `raft`. The `raft_server_id`
field in the schema was also introduced recently in `master` and didn't
get to be in a release yet. Given either of these reasons, we can remove
this field safely.
We plan to use gossip data to educate Raft RPC about IP addresses
of raft peers. Add raft server ids to application state, so
that when we get a notification about a gossip peer we can
identify which raft server id this notification is for,
specifically, we can find what IP address stands for this server
id, and, whenever the IP address changes, we can update Raft
address map with the new address.
On the same token, at boot time, we now have to start Gossip
before Raft, since Raft won't be able to send any messages
without gossip data about IP addresses.
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Each CDC generation always has a timestamp, but the fact that the
timestamp identifies the generation is an implementation detail.
We abstract away from this detail by using a more generic naming scheme:
a generation "identifier" (whatever that is - a timestamp or something
else).
It's possible that a CDC generation will be identified by more than a
timestamp in the (near) future.
The actual string gossiped by nodes in their application state is left
as "CDC_STREAMS_TIMESTAMP" for backward compatibility.
Some stale comments have been updated.
Snitch name needs to be exchanged within cluster once, on shadow
round, so joining nodes cannot use wrong snitch. The snitch names
are compared on bootstrap and on normal node start.
If the cluster already used mixed snitches, the upgrade to this
version will fail. In this case customer needs to add a node with
correct snitch for every node with the wrong snitch, then put
down the nodes with the wrong snitch and only then do the upgrade.
Fixes#6832Closes#7739
Generate a new generation of streams during bootstrap,
insert it into an internal distributed table for other nodes to read
and save its timestamp in the system.local table.
When restarting, read the generation timestamp from the system.local table.
Gossip the generation timestamp.
We would like to share with other nodes
the value of ignore_msb_bits property used by the node.
This is needed because CDC will operate on
streams of changes. Each shard on each node
will have its own stream that will be identified
by a stream_id. Stream_id will be selected in
such a way that using stream_id as partition key
will locate partition identified by stream_id on
a node and shard that the stream belongs to.
To be able to generate such stream_id we need
to know ignore_msb_bits property value for each node.
IMPORTANT NOTE: At this point CDC does not support
topology changes. It will work only on a stable cluster.
Support for topology modifications will be added in
later steps.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
We would like to share with other nodes
the number of shards available at the node.
This is needed because CDC will operate on
streams of changes. Each shard on each node
will have its own stream that will be identified
by a stream_id. Stream_id will be selected in
such a way that using stream_id as partition key
will locate partition identified by stream_id on
a node and shard that the stream belongs to.
To be able to generate such stream_id we need
to know how many shards are on each node.
IMPORTANT NOTE: At this point CDC does not support
topology changes. It will work only on a stable cluster.
Support for topology modifications will be added in
later steps.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
This lays the groundwork for brokering a node's view update
backlog across the whole cluster. This is needed for when a
coordinator does not contact a given replica for a long time, and uses
a backlog view that is outdated and causes requests to be
unnecessarily delayed.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
When a node start it does not have any information about cache temperature
of other nodes in the cluster and it is hard (if not impossible) to make
right guess. During cluster startup all nodes have cold caches, so there
is no point to redirect reads to other nodes even though local cache it
cold, but if only that node restarted than other nodes have populated
cache and reads should be redirected.
The node will get up-to-date information about other nodes caches,
but only after receiving first reply, until then it does not have the
information to make right decisions which may cause unwanted spikes
immediately after restart. Having cache temperature in gossiper helps
to solve the problem.
"There is a need to have an ability to detect whether a feature is
supported by entire cluster. The way to do it is to advertise feature
availability over gossip and then each node will be able to check if all
other nodes have a feature in question.
The idea is to have new application state SUPPORTED_FEATURES that will contain
set of strings, each string holding feature name.
This series adds API to do so.
The following patch on top of this series demostreates how to wait for features
during boot up. FEATURE1 and FEATURE2 are introduced. We use
wait_for_feature_on_all_node to wait for FEATURE1 and FEATURE2 successfully.
Since FEATURE3 is not supported, the wait will not succeed, the wait will timeout.
--- a/service/storage_service.cc
+++ b/service/storage_service.cc
@@ -95,7 +95,7 @@ sstring storage_service::get_config_supported_features() {
// Add features supported by this local node. When a new feature is
// introduced in scylla, update it here, e.g.,
// return sstring("FEATURE1,FEATURE2")
- return sstring("");
+ return sstring("FEATURE1,FEATURE2");
}
std::set<inet_address> get_seeds() {
@@ -212,6 +212,11 @@ void storage_service::prepare_to_join() {
// gossip snitch infos (local DC and rack)
gossip_snitch_info().get();
+ gossiper.wait_for_feature_on_all_node(std::set<sstring>{sstring("FEATURE1"), sstring("FEATURE2")}, std::chrono::seconds(30)).get();
+ logger.info("Wait for FEATURE1 and FEATURE2 done");
+ gossiper.wait_for_feature_on_all_node(std::set<sstring>{sstring("FEATURE3")}).get();
+ logger.info("Wait for FEATURE3 done");
+
We can query the supported_features:
cqlsh> SELECT supported_features from system.peers;
supported_features
--------------------
FEATURE1,FEATURE2
FEATURE1,FEATURE2
(2 rows)
cqlsh> SELECT supported_features from system.local;
supported_features
--------------------
FEATURE1,FEATURE2
(1 rows)"
The gossiped application state is a list of key/version pairs. The keys
come from the application_state enum in this patch.
This is a trivial conversion of the Java enum. It is possible we may need
to add more features to this enum class (Java enums have all sorts of weird
capabilities beyond C++ enums), but with any luck, we won't...
Signed-off-by: Nadav Har'El <nyh@cloudius-systems.com>
